Fits MC fractions to data histogram.
À la HMCMLL, see R. Barlow and C. Beeston, Comp. Phys. Comm. 77 (1993) 219-228
The virtue of this fit is that it takes into account both data and Monte Carlo statistical uncertainties. The way in which this is done is through a standard likelihood fit using Poisson statistics; however, the template (MC) predictions are also varied within statistics, leading to additional contributions to the overall likelihood. This leads to many more fit parameters (one per bin per template), but the minimisation with respect to these additional parameters is done analytically rather than introducing them as formal fit parameters. Some special care needs to be taken in the case of bins with zero content. For more details please see the original publication cited above.
An example application of this fit is given below. For a TH1* histogram ("data") fitted as the sum of three Monte Carlo sources ("mc"):
A few assumptions need to be made for the fit procedure to be carried out: 1 The total number of events in each template is not too small (so that its Poisson uncertainty can be neglected). 2 The number of events in each bin is much smaller than the total number of events in each template (so that multinomial uncertainties can be replaced with Poisson uncertainties).
Biased fit uncertainties may result if these conditions are not fulfilled (see e.g. arXiv:0803.2711).
A fit object is instantiated through TFractionFitter* fit = new TFractionFitter(data, mc); A number of basic checks (intended to ensure that the template histograms represent the same "kind" of distribution as the data one) are carried out. The TVirtualFitter object is then addressed and all fit parameters (the template fractions) declared (initially unbounded).
Fit parameters can be constrained through
fit->Constrain(parameter #, lower bound, upper bound);
Setting lower bound = upper bound = 0 removes the constraint (a la Minuit); however, a function
fit->Unconstrain(parameter #)
is also provided to simplify this.
The function
ROOT::Fit::Fitter* fitter = fit->GetFitter();
is provided for direct access to the ROOT::Fit::Fitter object. This allows to set and fix parameter values, limits and set step sizes directly via
fitter->Config().ParSettings(parameter #).Set(const std::string &name, double value, double step, double lower,
double upper);
The fit range can be restricted through
fit->SetRangeX(first bin #, last bin #);
and freed using
fit->ReleaseRangeX();
For 2D histograms the Y range can be similarly restricted using
fit->SetRangeY(first bin #, last bin #); fit->ReleaseRangeY();
and for 3D histograms also
fit->SetRangeZ(first bin #, last bin #); fit->ReleaseRangeZ();
It is also possible to exclude individual bins from the fit through
fit->ExcludeBin(bin #);
where the given bin number is assumed to follow the TH1::GetBin() numbering. Any bins excluded in this way can be included again using the corresponding
fit->IncludeBin(bin #);
Weights histograms (for a motivation see the above publication) can be specified for the individual MC sources through
fit->SetWeight(parameter #, pointer to weights histogram);
and unset by specifying a null pointer.
The fit is carried out through
Int_t status = fit->Fit();
where status is the code returned from the "MINIMIZE" command. For fits that converged, parameter values and errors can be obtained through
fit->GetResult(parameter #, value, error);
and the histogram corresponding to the total Monte Carlo prediction (which is not the same as a simple weighted sum of the input Monte Carlo distributions) can be obtained by
TH1* result = fit->GetPlot();
It is possible to change the histogram being fitted through
fit->SetData(TH1* data);
and to change the template histogram for a given parameter number through
fit->SetMC(parameter #, TH1* MC);
This can speed up code in case of multiple data or template histograms; however, it should be done with care as any settings are taken over from the previous fit. In addition, neither the dimensionality nor the numbers of bins of the histograms should change (in that case it is better to instantiate a new TFractionFitter object).
Any serious inconsistency results in an error.
Definition at line 27 of file TFractionFitter.h.
Public Types | |
| enum | { kSingleKey = (1ULL << (0)) , kOverwrite = (1ULL << (1)) , kWriteDelete = (1ULL << (2)) } |
| enum | { kIsOnHeap = 0x01000000 , kNotDeleted = 0x02000000 , kZombie = 0x04000000 , kInconsistent = 0x08000000 , kBitMask = 0x00ffffff } |
| enum | EDeprecatedStatusBits { kObjInCanvas = (1ULL << (3)) } |
| enum | EStatusBits { kCanDelete = (1ULL << (0)) , kMustCleanup = (1ULL << (3)) , kIsReferenced = (1ULL << (4)) , kHasUUID = (1ULL << (5)) , kCannotPick = (1ULL << (6)) , kNoContextMenu = (1ULL << (8)) , kInvalidObject = (1ULL << (13)) } |
Public Member Functions | |
| TFractionFitter () | |
| TFractionFitter default constructor. | |
| TFractionFitter (TH1 *data, TObjArray *MCs, Option_t *option="") | |
| TFractionFitter constructor. | |
| ~TFractionFitter () override | |
| TFractionFitter default destructor. | |
| void | AbstractMethod (const char *method) const |
| Call this function within a function that you don't want to define as purely virtual, in order not to force all users deriving from that class to implement that maybe (on their side) unused function; but at the same time, emit a run-time warning if they try to call it, telling that it is not implemented in the derived class: action must thus be taken on the user side to override it. | |
| virtual void | AppendPad (Option_t *option="") |
| Append graphics object to current pad. | |
| virtual void | Browse (TBrowser *b) |
| Browse object. May be overridden for another default action. | |
| ULong_t | CheckedHash () |
| Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object. | |
| virtual const char * | ClassName () const |
| Returns name of class to which the object belongs. | |
| virtual void | Clear (Option_t *="") |
| virtual TObject * | Clone (const char *newname="") const |
| Make a clone of an object using the Streamer facility. | |
| virtual Int_t | Compare (const TObject *obj) const |
| Compare abstract method. | |
| void | Constrain (Int_t parm, Double_t low, Double_t high) |
| Constrain the values of parameter number <parm> (the parameter numbering follows that of the input template vector). | |
| virtual void | Copy (TObject &object) const |
| Copy this to obj. | |
| virtual void | Delete (Option_t *option="") |
| Delete this object. | |
| virtual Int_t | DistancetoPrimitive (Int_t px, Int_t py) |
| Computes distance from point (px,py) to the object. | |
| virtual void | Draw (Option_t *option="") |
| Default Draw method for all objects. | |
| virtual void | DrawClass () const |
| Draw class inheritance tree of the class to which this object belongs. | |
| virtual TObject * | DrawClone (Option_t *option="") const |
| Draw a clone of this object in the current selected pad with: gROOT->SetSelectedPad(c1). | |
| virtual void | Dump () const |
| Dump contents of object on stdout. | |
| virtual void | Error (const char *method, const char *msgfmt,...) const |
| Issue error message. | |
| void | ErrorAnalysis (Double_t UP) |
| Set UP to the given value (see class TMinuit), and perform a MINOS minimisation. | |
| Double_t | EvaluateFCN (const Double_t *par) |
| void | ExcludeBin (Int_t bin) |
| Exclude the given bin from the fit. | |
| virtual void | Execute (const char *method, const char *params, Int_t *error=nullptr) |
| Execute method on this object with the given parameter string, e.g. | |
| virtual void | Execute (TMethod *method, TObjArray *params, Int_t *error=nullptr) |
| Execute method on this object with parameters stored in the TObjArray. | |
| virtual void | ExecuteEvent (Int_t event, Int_t px, Int_t py) |
| Execute action corresponding to an event at (px,py). | |
| virtual void | Fatal (const char *method, const char *msgfmt,...) const |
| Issue fatal error message. | |
| virtual TObject * | FindObject (const char *name) const |
| Must be redefined in derived classes. | |
| virtual TObject * | FindObject (const TObject *obj) const |
| Must be redefined in derived classes. | |
| TFitResultPtr | Fit () |
| Perform the fit with the default UP value. | |
| Double_t | GetChisquare () const |
| Return the likelihood ratio Chi-squared (chi2) for the fit. | |
| virtual Option_t * | GetDrawOption () const |
| Get option used by the graphics system to draw this object. | |
| ROOT::Fit::Fitter * | GetFitter () const |
| Give direct access to the underlying fitter class. | |
| virtual const char * | GetIconName () const |
| Returns mime type name of object. | |
| TH1 * | GetMCPrediction (Int_t parm) const |
| Return the adjusted MC template (Aji) for template (parm). | |
| virtual const char * | GetName () const |
| Returns name of object. | |
| Int_t | GetNDF () const |
| return the number of degrees of freedom in the fit the fNDF parameter has been previously computed during a fit. | |
| virtual char * | GetObjectInfo (Int_t px, Int_t py) const |
| Returns string containing info about the object at position (px,py). | |
| virtual Option_t * | GetOption () const |
| TH1 * | GetPlot () |
| Return the "template prediction" corresponding to the fit result (this is not the same as the weighted sum of template distributions, as template statistical uncertainties are taken into account). | |
| Double_t | GetProb () const |
| return the fit probability | |
| void | GetResult (Int_t parm, Double_t &value, Double_t &error) const |
| Obtain the fit result for parameter <parm> (the parameter numbering follows that of the input template vector). | |
| virtual const char * | GetTitle () const |
| Returns title of object. | |
| virtual UInt_t | GetUniqueID () const |
| Return the unique object id. | |
| virtual Bool_t | HandleTimer (TTimer *timer) |
| Execute action in response of a timer timing out. | |
| virtual ULong_t | Hash () const |
| Return hash value for this object. | |
| Bool_t | HasInconsistentHash () const |
| Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e. | |
| void | IncludeBin (Int_t bin) |
| Include the given bin in the fit, if it was excluded before using ExcludeBin(). | |
| virtual void | Info (const char *method, const char *msgfmt,...) const |
| Issue info message. | |
| virtual Bool_t | InheritsFrom (const char *classname) const |
| Returns kTRUE if object inherits from class "classname". | |
| virtual Bool_t | InheritsFrom (const TClass *cl) const |
| Returns kTRUE if object inherits from TClass cl. | |
| virtual void | Inspect () const |
| Dump contents of this object in a graphics canvas. | |
| void | InvertBit (UInt_t f) |
| TClass * | IsA () const override |
| Bool_t | IsDestructed () const |
| IsDestructed. | |
| virtual Bool_t | IsEqual (const TObject *obj) const |
| Default equal comparison (objects are equal if they have the same address in memory). | |
| virtual Bool_t | IsFolder () const |
| Returns kTRUE in case object contains browsable objects (like containers or lists of other objects). | |
| Bool_t | IsOnHeap () const |
| virtual Bool_t | IsSortable () const |
| Bool_t | IsZombie () const |
| virtual void | ls (Option_t *option="") const |
| The ls function lists the contents of a class on stdout. | |
| void | MayNotUse (const char *method) const |
| Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary). | |
| virtual Bool_t | Notify () |
| This method must be overridden to handle object notification (the base implementation is no-op). | |
| void | Obsolete (const char *method, const char *asOfVers, const char *removedFromVers) const |
| Use this method to declare a method obsolete. | |
| void | operator delete (void *, size_t) |
| Operator delete for sized deallocation. | |
| void | operator delete (void *ptr) |
| Operator delete. | |
| void | operator delete (void *ptr, void *vp) |
| Only called by placement new when throwing an exception. | |
| void | operator delete[] (void *, size_t) |
| Operator delete [] for sized deallocation. | |
| void | operator delete[] (void *ptr) |
| Operator delete []. | |
| void | operator delete[] (void *ptr, void *vp) |
| Only called by placement new[] when throwing an exception. | |
| void * | operator new (size_t sz) |
| void * | operator new (size_t sz, void *vp) |
| void * | operator new[] (size_t sz) |
| void * | operator new[] (size_t sz, void *vp) |
| virtual void | Paint (Option_t *option="") |
| This method must be overridden if a class wants to paint itself. | |
| virtual void | Pop () |
| Pop on object drawn in a pad to the top of the display list. | |
| virtual void | Print (Option_t *option="") const |
| This method must be overridden when a class wants to print itself. | |
| virtual Int_t | Read (const char *name) |
| Read contents of object with specified name from the current directory. | |
| virtual void | RecursiveRemove (TObject *obj) |
| Recursively remove this object from a list. | |
| void | ReleaseRangeX () |
| Release restrictions on the X range of the histogram to be used in the fit. | |
| void | ReleaseRangeY () |
| Release restrictions on the Y range of the histogram to be used in the fit. | |
| void | ReleaseRangeZ () |
| Release restrictions on the Z range of the histogram to be used in the fit. | |
| void | ResetBit (UInt_t f) |
| virtual void | SaveAs (const char *filename="", Option_t *option="") const |
| Save this object in the file specified by filename. | |
| virtual void | SavePrimitive (std::ostream &out, Option_t *option="") |
| Save a primitive as a C++ statement(s) on output stream "out". | |
| void | SetBit (UInt_t f) |
| void | SetBit (UInt_t f, Bool_t set) |
| Set or unset the user status bits as specified in f. | |
| void | SetData (TH1 *data) |
| Change the histogram to be fitted to. | |
| virtual void | SetDrawOption (Option_t *option="") |
| Set drawing option for object. | |
| void | SetMC (Int_t parm, TH1 *MC) |
| Change the histogram for template number <parm>. | |
| void | SetRangeX (Int_t low, Int_t high) |
| Set the X range of the histogram to be used in the fit. | |
| void | SetRangeY (Int_t low, Int_t high) |
| Set the Y range of the histogram to be used in the fit (2D or 3D histograms only). | |
| void | SetRangeZ (Int_t low, Int_t high) |
| Set the Z range of the histogram to be used in the fit (3D histograms only). | |
| virtual void | SetUniqueID (UInt_t uid) |
| Set the unique object id. | |
| void | SetWeight (Int_t parm, TH1 *weight) |
| Set bin by bin weights for template number <parm> (the parameter numbering follows that of the input template vector). | |
| void | Streamer (TBuffer &) override |
| Stream an object of class TObject. | |
| void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
| virtual void | SysError (const char *method, const char *msgfmt,...) const |
| Issue system error message. | |
| Bool_t | TestBit (UInt_t f) const |
| Int_t | TestBits (UInt_t f) const |
| void | UnConstrain (Int_t parm) |
| Remove the constraints on the possible values of parameter <parm>. | |
| virtual void | UseCurrentStyle () |
| Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked. | |
| virtual void | Warning (const char *method, const char *msgfmt,...) const |
| Issue warning message. | |
| virtual Int_t | Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) |
| Write this object to the current directory. | |
| virtual Int_t | Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) const |
| Write this object to the current directory. | |
Static Public Member Functions | |
| static TClass * | Class () |
| static const char * | Class_Name () |
| static constexpr Version_t | Class_Version () |
| static const char * | DeclFileName () |
| static Longptr_t | GetDtorOnly () |
| Return destructor only flag. | |
| static Bool_t | GetObjectStat () |
| Get status of object stat flag. | |
| static void | SetDtorOnly (void *obj) |
| Set destructor only flag. | |
| static void | SetObjectStat (Bool_t stat) |
| Turn on/off tracking of objects in the TObjectTable. | |
Protected Types | |
| enum | { kOnlyPrepStep = (1ULL << (3)) } |
Protected Member Functions | |
| virtual void | DoError (int level, const char *location, const char *fmt, va_list va) const |
| Interface to ErrorHandler (protected). | |
| void | MakeZombie () |
Static Protected Member Functions | |
| static void | SavePrimitiveConstructor (std::ostream &out, TClass *cl, const char *variable_name, const char *constructor_agrs="", Bool_t empty_line=kTRUE) |
| Save object constructor in the output stream "out". | |
| static void | SavePrimitiveDraw (std::ostream &out, const char *variable_name, Option_t *option=nullptr) |
| Save invocation of primitive Draw() method Skipped if option contains "nodraw" string. | |
| static TString | SavePrimitiveVector (std::ostream &out, const char *prefix, Int_t len, Double_t *arr, Int_t flag=0) |
| Save array in the output stream "out" as vector. | |
Protected Attributes | |
| TObjArray | fAji |
| Array of pointers to predictions of real template distributions. | |
| Double_t | fChisquare |
| Template fit chisquare. | |
| std::vector< Int_t > | fExcludedBins |
| Bins excluded from the fit. | |
| Bool_t | fFitDone |
| Flags whether a valid fit has been performed. | |
| Int_t | fHighLimitX |
| Last bin in X dimension. | |
| Int_t | fHighLimitY |
| Last bin in Y dimension. | |
| Int_t | fHighLimitZ |
| Last bin in Z dimension. | |
| Int_t | fLowLimitX |
| First bin in X dimension. | |
| Int_t | fLowLimitY |
| First bin in Y dimension. | |
| Int_t | fLowLimitZ |
| First bin in Z dimension. | |
| Int_t | fNDF |
| Number of degrees of freedom in the fit. | |
| Int_t | fNpar |
| number of fit parameters | |
| Int_t | fNpfits |
| Number of points used in the fit. | |
Histograms | |
| TH1 * | fData |
| Pointer to the "data" histogram to be fitted to. | |
| TObjArray | fMCs |
| Array of pointers to template histograms. | |
| TObjArray | fWeights |
| Array of pointers to corresponding weight factors (may be null). | |
| Double_t | fIntegralData |
| "data" histogram content integral over allowed fit range | |
| Double_t * | fIntegralMCs |
| Same for template histograms (weights not taken into account). | |
| Double_t * | fFractions |
| Template fractions scaled to the "data" histogram statistics. | |
| TH1 * | fPlot |
| Pointer to histogram containing summed template predictions. | |
| ROOT::Fit::Fitter * | fFractionFitter |
| Pointer to Fitter class. | |
Private Member Functions | |
| void | CheckConsistency () |
| Function used internally to check the consistency between the various histograms. | |
| void | CheckParNo (Int_t parm) const |
| Function for internal use, checking parameter validity An invalid parameter results in an error. | |
| void | ComputeChisquareLambda () |
| Method used internally to compute the likelihood ratio chi2 See the function GetChisquare() for details. | |
| void | ComputeFCN (Double_t &f, const Double_t *par, Int_t flag) |
| Used internally to compute the likelihood value. | |
| void | FindPrediction (int bin, double &t_i, int &k_0, double &A_ki) const |
| Function used internally to obtain the template prediction in the individual bins 'bin' <=> 'i' (paper) 'par' <=> 'j' (paper). | |
| void | GetRanges (Int_t &minX, Int_t &maxX, Int_t &minY, Int_t &maxY, Int_t &minZ, Int_t &maxZ) const |
| Used internally to obtain the bin ranges according to the dimensionality of the histogram and the limits set by hand. | |
| bool | IsExcluded (Int_t bin) const |
| Function for internal use, checking whether the given bin is excluded from the fit or not. | |
Static Private Member Functions | |
| static void | AddToTObjectTable (TObject *) |
| Private helper function which will dispatch to TObjectTable::AddObj. | |
Private Attributes | |
| UInt_t | fBits |
| bit field status word | |
| UInt_t | fUniqueID |
| object unique identifier | |
Static Private Attributes | |
| static Longptr_t | fgDtorOnly = 0 |
| object for which to call dtor only (i.e. no delete) | |
| static Bool_t | fgObjectStat = kTRUE |
| if true keep track of objects in TObjectTable | |
#include <TFractionFitter.h>
|
protectedinherited |
|
inherited |
|
inherited |
|
inherited |
|
inherited |
| TFractionFitter::TFractionFitter | ( | ) |
TFractionFitter default constructor.
Definition at line 167 of file TFractionFitter.cxx.
TFractionFitter constructor.
Does a complete initialisation (including consistency checks, default fit range as the whole histogram but without under- and overflows, and declaration of the fit parameters). Note that the histograms are not copied, only references are used.
| [in] | data | histogram to be fitted |
| [in] | MCs | array of TH1* corresponding template distributions |
| [in] | option | can be used to control the print level of the minimization algorithm
|
Definition at line 197 of file TFractionFitter.cxx.
|
override |
TFractionFitter default destructor.
Definition at line 261 of file TFractionFitter.cxx.
|
inherited |
Call this function within a function that you don't want to define as purely virtual, in order not to force all users deriving from that class to implement that maybe (on their side) unused function; but at the same time, emit a run-time warning if they try to call it, telling that it is not implemented in the derived class: action must thus be taken on the user side to override it.
In other word, this method acts as a "runtime purely virtual" warning instead of a "compiler purely virtual" error.
Definition at line 1149 of file TObject.cxx.
|
staticprivateinherited |
Private helper function which will dispatch to TObjectTable::AddObj.
Included here to avoid circular dependency between header files.
Definition at line 195 of file TObject.cxx.
|
virtualinherited |
Append graphics object to current pad.
In case no current pad is set yet, create a default canvas with the name "c1".
Definition at line 204 of file TObject.cxx.
|
virtualinherited |
Browse object. May be overridden for another default action.
Reimplemented in RooPlot, ROOT::Experimental::XRooFit::xRooNode, ROOT::Internal::THnBaseBrowsable, TApplicationRemote, TASImage, TAxis3D, TBaseClass, TBranch, TBranchClones, TBranchElement, TBranchObject, TBranchSTL, TBrowserObject, TCanvas, TChain, TClass, TCollection, TCollectionPropertyBrowsable, TDatabasePDG, TDirectory, TDirectoryFile, TEfficiency, TF1, TFolder, TGenerator, TGeoManager, TGeometry, TGeoNode, TGeoOverlap, TGeoTrack, TGeoVolume, TGraph2D, TGraph, TH1, THbookBranch, THbookFile, THbookKey, THnBase, THStack, TKey, TKeyMapFile, TLeaf, TMacro, TMapFile, TMultiDimFit, TMultiGraph, TNode, TNtuple, TNtupleD, TPad, TPair, TParticleClassPDG, TPrincipal, TRecorder, TRemoteObject, TROOT, TRootIconList, TSPlot, TStyle, TSystemDirectory, TSystemFile, TTask, TTree, TTreePerfStats, and TVirtualBranchBrowsable.
Definition at line 218 of file TObject.cxx.
|
private |
Function used internally to check the consistency between the various histograms.
Checks are performed on nonexistent or empty histograms, the precise histogram class, and the number of bins. In addition, integrals over the "allowed" bin ranges are computed. Any inconsistency results in a error.
Definition at line 488 of file TFractionFitter.cxx.
|
inlineinherited |
Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object.
The intent is for this routine to be called instead of directly calling the function Hash during "insert" operations. See TObject::HasInconsistenTObjectHash();
(*) The setup is consistent when all classes in the class hierarchy that overload TObject::Hash do call ROOT::CallRecursiveRemoveIfNeeded in their destructor. i.e. it is safe to call the Hash virtual function during the RecursiveRemove operation.
|
private |
Function for internal use, checking parameter validity An invalid parameter results in an error.
Definition at line 331 of file TFractionFitter.cxx.
|
static |
|
static |
|
inlinestaticconstexpr |
Definition at line 112 of file TFractionFitter.h.
|
virtualinherited |
Returns name of class to which the object belongs.
Definition at line 227 of file TObject.cxx.
|
inlinevirtualinherited |
Reimplemented in JetEvent, RooLinkedList, ROOT::TSchemaRule, ROOT::v5::TFormula, TBackCompFitter, TBits, TBranchRef, TBtree, TCanvas, TClonesArray, TCollection, TDictAttributeMap, TDirectory, TEventList, TFitter, TFolder, TFormula, TFumili, TGeoCombiTrans, TGeoGenTrans, TGeoHMatrix, TGeoRotation, TGHtml, TGraph2D, TGTextEdit, TGTextEntry, TGTextView, TGView, THashList, THashTable, TLegend, TLinearFitter, TList, TListOfDataMembers, TListOfEnums, TListOfEnumsWithLock, TListOfFunctions, TListOfFunctionTemplates, TMap, TMatrixT< Element >, TMatrixT< AReal >, TMatrixT< Double_t >, TMatrixT< Float_t >, TMatrixTBase< Element >, TMatrixTBase< Double_t >, TMatrixTBase< Float_t >, TMatrixTSparse< Element >, TMatrixTSparse< Double_t >, TMatrixTSparse< Float_t >, TMatrixTSym< Element >, TMatrixTSym< Double_t >, TMatrixTSym< Float_t >, TMrbSubevent_Caen, TMultiDimFit, TMVA::MinuitWrapper, TMVA::ResultsClassification, TMVA::ResultsMulticlass, TMVA::ResultsRegression, TNamed, TNotifyLinkBase, TObjArray, TOrdCollection, TPad, TPaveText, TPrincipal, TProcessID, TRefArray, TRefTable, TStreamerInfo, TTask, TUsrHitBuffer, TVectorT< Element >, TVectorT< Double_t >, TVectorT< Float_t >, TViewPubDataMembers, TViewPubFunctions, TVirtualFitter, TVirtualPad, and TVirtualStreamerInfo.
|
virtualinherited |
Make a clone of an object using the Streamer facility.
If the object derives from TNamed, this function is called by TNamed::Clone. TNamed::Clone uses the optional argument to set a new name to the newly created object.
If the object class has a DirectoryAutoAdd function, it will be called at the end of the function with the parameter gDirectory. This usually means that the object will be appended to the current ROOT directory.
Reimplemented in RooAbsArg, RooAbsBinning, RooAbsCollection, RooAbsStudy, RooCatType, RooCmdArg, RooDataHist, RooDataSet, RooFitResult, RooLinkedList, RooStats::HypoTestResult, RooStats::ModelConfig, RooStudyPackage, RooTemplateProxy< T >, RooTemplateProxy< const RooHistFunc >, RooTemplateProxy< RooAbsCategory >, RooTemplateProxy< RooAbsPdf >, RooTemplateProxy< RooAbsReal >, RooTemplateProxy< RooAbsRealLValue >, RooTemplateProxy< RooMultiCategory >, RooTemplateProxy< RooRealVar >, RooWorkspace, TASImage, TChainIndex, TClass, TCollection, TF1, TFunction, TFunctionTemplate, TH1, TImage, TMethod, TMethodCall, TMinuit, TMVA::MinuitWrapper, TNamed, TStreamerInfo, and TTreeIndex.
Definition at line 243 of file TObject.cxx.
Compare abstract method.
Must be overridden if a class wants to be able to compare itself with other objects. Must return -1 if this is smaller than obj, 0 if objects are equal and 1 if this is larger than obj.
Reimplemented in RooAbsArg, RooDouble, TCollection, TEnvRec, TFileInfo, TGeoBranchArray, TGeoOverlap, TGFSFrameElement, TGLBFrameElement, TNamed, TObjString, TParameter< AParamType >, TParameter< Long64_t >, TStructNode, TStructNodeProperty, and TUrl.
Definition at line 258 of file TObject.cxx.
|
private |
Method used internally to compute the likelihood ratio chi2 See the function GetChisquare() for details.
Definition at line 918 of file TFractionFitter.cxx.
Used internally to compute the likelihood value.
Definition at line 668 of file TFractionFitter.cxx.
Constrain the values of parameter number <parm> (the parameter numbering follows that of the input template vector).
Use UnConstrain() to remove this constraint.
Definition at line 467 of file TFractionFitter.cxx.
|
virtualinherited |
Copy this to obj.
Reimplemented in ROOT::v5::TFormula, TArc, TArrow, TAxis3D, TAxis, TBox, TColor, TCrown, TDirectory, TDirectoryFile, TEllipse, TF12, TF1, TF1AbsComposition, TF1Convolution, TF1NormSum, TF2, TF3, TFile, TFolder, TFormula, TFrame, TGTextEdit, TGTextView, TH1, TH1C, TH1D, TH1F, TH1I, TH1L, TH1S, TH2, TH2C, TH2D, TH2F, TH2I, TH2L, TH2Poly, TH2S, TH3, TH3C, TH3D, TH3F, TH3I, TH3L, TH3S, THelix, TLatex, TLegend, TLegendEntry, TLine, TMarker, TMathText, TNamed, TPaletteAxis, TPave, TPaveClass, TPaveLabel, TPieSlice, TPolyLine3D, TPolyLine, TPolyMarker3D, TPolyMarker, TProfile2D, TProfile3D, TProfile, TStyle, TSystemDirectory, TSystemFile, TText, TWbox, and TXTRU.
Definition at line 159 of file TObject.cxx.
|
inlinestatic |
Definition at line 112 of file TFractionFitter.h.
|
virtualinherited |
Delete this object.
Typically called as a command via the interpreter. Normally use "delete" operator when object has been allocated on the heap.
Reimplemented in RooLinkedList, TAxis, TBtree, TCanvas, TClonesArray, TCollection, TDirectory, TDirectoryFile, TExMap, TFile, TGFrame, TGItemContext, TGTextEdit, THashList, THashTable, TKey, TKeySQL, TKeyXML, TList, TListOfDataMembers, TListOfEnums, TListOfEnumsWithLock, TListOfFunctions, TListOfFunctionTemplates, TMap, TMVA::Results, TObjArray, TObjectTable, TOrdCollection, TProtoClass, TQCommand, TRefArray, TSystemDirectory, TSystemFile, TThread, TTree, TTreeViewer, TViewPubDataMembers, and TViewPubFunctions.
Definition at line 268 of file TObject.cxx.
Computes distance from point (px,py) to the object.
This member function must be implemented for each graphics primitive. This default function returns a big number (999999).
Reimplemented in TASImage, TAxis3D, TAxis, TBox, TBRIK, TColorWheel, TCrown, TCurlyArc, TCurlyLine, TDiamond, TEfficiency, TEllipse, TF1, TF2, TF3, TFileDrawMap, TGenerator, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoNode, TGeoOverlap, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShape, TGeoShapeAssembly, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTrack, TGeoTube, TGeoTubeSeg, TGeoVGShape, TGeoVolume, TGeoXtru, TGL5DDataSet, TGLHistPainter, TGLParametricEquation, TGLScenePad, TGLTH3Composition, TGLViewer, TGraph2D, TGraph, TGraphEdge, TGraphNode, TGraphPolargram, TH1, THistPainter, THStack, TLine, TMarker3DBox, TMarker, TMultiGraph, TNode, TPad, TPaletteAxis, TParallelCoord, TParallelCoordRange, TParallelCoordVar, TParticle, TPave, TPCON, TPie, TPieSlice, TPoints3DABC, TPolyLine3D, TPolyLine, TPolyMarker3D, TPolyMarker, TPrimary, TScatter2D, TScatter, TSPHE, TSpider, TSpline, TStyle, TText, TTreePerfStats, TTUBE, TTUBS, TVirtualHistPainter, and TXTRU.
Definition at line 284 of file TObject.cxx.
|
protectedvirtualinherited |
Interface to ErrorHandler (protected).
Reimplemented in TThread, and TTreeViewer.
Definition at line 1059 of file TObject.cxx.
|
virtualinherited |
Default Draw method for all objects.
Reimplemented in RooAbsData, RooPlot, RooStats::HypoTestInverterPlot, RooStats::SamplingDistPlot, ROOT::Experimental::XRooFit::xRooNLLVar::xRooHypoPoint, ROOT::Experimental::XRooFit::xRooNLLVar::xRooHypoSpace, ROOT::Experimental::XRooFit::xRooNode, ROOT::RGeoPainter, TArrow, TASImage, TBox, TBrowser, TButton, TCanvas, TChain, TClass, TClassTree, TCollection, TColorWheel, TDiamond, TDirectory, TEfficiency, TEllipse, TEveGeoNode, TEveGeoTopNode, TF1, TF2, TF3, TFile, TFITSHDU, TFrame, TGenerator, TGeoBatemanSol, TGeometry, TGeoNode, TGeoOverlap, TGeoPainter, TGeoParallelWorld, TGeoPhysicalNode, TGeoPolygon, TGeoShape, TGeoTrack, TGeoVGShape, TGeoVolume, TGItemContext, TGListTree, TGPicture, TGraph2D, TGraph, TGraphPolar, TGraphPolargram, TGraphStruct, TGraphTime, TH1, THelix, THStack, TLegend, TMarker, TMatrixTBase< Element >, TMatrixTBase< Double_t >, TMatrixTBase< Float_t >, TMultiDimFit, TMultiGraph, TMultiLayerPerceptron, TNode, TNodeDiv, TPad, TParallelCoord, TParallelCoordRange, TParallelCoordVar, TPave, TPaveLabel, TPavesText, TPaveText, TPie, TPolyLine3D, TPolyLine, TPolyMarker3D, TPolyMarker, TRatioPlot, TSpider, TSpline, TStructViewer, TStructViewerGUI, TTree, TTreePerfStats, TVectorT< Element >, TVectorT< Double_t >, TVectorT< Float_t >, TVirtualPad, and TWbox.
Definition at line 293 of file TObject.cxx.
|
virtualinherited |
Draw class inheritance tree of the class to which this object belongs.
If a class B inherits from a class A, description of B is drawn on the right side of description of A. Member functions overridden by B are shown in class A with a blue line crossing-out the corresponding member function. The following picture is the class inheritance tree of class TPaveLabel:
Reimplemented in TGFrame, TSystemDirectory, and TSystemFile.
Definition at line 308 of file TObject.cxx.
Draw a clone of this object in the current selected pad with: gROOT->SetSelectedPad(c1).
If pad was not selected - gPad will be used.
Reimplemented in TAxis, TCanvas, TGFrame, TSystemDirectory, and TSystemFile.
Definition at line 319 of file TObject.cxx.
|
virtualinherited |
Dump contents of object on stdout.
Using the information in the object dictionary (class TClass) each data member is interpreted. If a data member is a pointer, the pointer value is printed
The following output is the Dump of a TArrow object:
Reimplemented in TClass, TCollection, TGFrame, TGPack, and TSystemFile.
Definition at line 367 of file TObject.cxx.
|
virtualinherited |
Issue error message.
Use "location" to specify the method where the error occurred. Accepts standard printf formatting arguments.
Reimplemented in TFitResult.
Definition at line 1098 of file TObject.cxx.
| void TFractionFitter::ErrorAnalysis | ( | Double_t | UP | ) |
Set UP to the given value (see class TMinuit), and perform a MINOS minimisation.
Definition at line 587 of file TFractionFitter.cxx.
Definition at line 66 of file TFractionFitter.h.
| void TFractionFitter::ExcludeBin | ( | Int_t | bin | ) |
Exclude the given bin from the fit.
The bin numbering to be used is that of TH1::GetBin().
Definition at line 422 of file TFractionFitter.cxx.
|
virtualinherited |
Execute method on this object with the given parameter string, e.g.
"3.14,1,\"text\"".
Reimplemented in ROOT::R::TRInterface, TCling, TContextMenu, TInterpreter, and TMethodCall.
Definition at line 378 of file TObject.cxx.
|
virtualinherited |
Execute method on this object with parameters stored in the TObjArray.
The TObjArray should contain an argv vector like:
Reimplemented in ROOT::R::TRInterface, TCling, TContextMenu, TInterpreter, and TMethodCall.
Definition at line 398 of file TObject.cxx.
Execute action corresponding to an event at (px,py).
This method must be overridden if an object can react to graphics events.
Reimplemented in TASImage, TASPaletteEditor::LimitLine, TAxis3D, TAxis, TBox, TButton, TCanvas, TCrown, TCurlyArc, TCurlyLine, TDiamond, TEfficiency, TEllipse, TF1, TF2, TF3, TFrame, TGenerator, TGeoManager, TGeoNode, TGeoOverlap, TGeoShape, TGeoTrack, TGeoVolume, TGL5DDataSet, TGLEventHandler, TGLHistPainter, TGLParametricEquation, TGLScenePad, TGLTH3Composition, TGLViewer, TGraph2D, TGraph, TGraphEdge, TGraphNode, TGraphPolargram, TGroupButton, TH1, THistPainter, TLine, TLink, TMarker3DBox, TMarker, TNode, TPad, TPaletteAxis, TParallelCoord, TParallelCoordRange, TParallelCoordVar, TParticle, TPave, TPie, TPolyLine3D, TPolyLine, TPolyMarker3D, TPolyMarker, TPrimary, TScatter2D, TScatter, TSliderBox, TSpider, TSpline, TText, TTreePerfStats, TView3D, TView, TVirtualHistPainter, and TWbox.
Definition at line 415 of file TObject.cxx.
|
virtualinherited |
Issue fatal error message.
Use "location" to specify the method where the fatal error occurred. Accepts standard printf formatting arguments.
Definition at line 1126 of file TObject.cxx.
|
virtualinherited |
Must be redefined in derived classes.
This function is typically used with TCollections, but can also be used to find an object by name inside this object.
Reimplemented in RooAbsCollection, RooLinkedList, TBtree, TCollection, TDirectory, TFolder, TGeometry, TGraph2D, TGraph, TH1, THashList, THashTable, THbookFile, TList, TListOfDataMembers, TListOfEnums, TListOfEnumsWithLock, TListOfFunctions, TListOfFunctionTemplates, TListOfTypes, TMap, TObjArray, TPad, TROOT, TViewPubDataMembers, and TViewPubFunctions.
Definition at line 425 of file TObject.cxx.
Must be redefined in derived classes.
This function is typically used with TCollections, but can also be used to find an object inside this object.
Reimplemented in RooAbsCollection, RooLinkedList, TBtree, TCollection, TDirectory, TFolder, TGeometry, TGraph2D, TGraph, TH1, THashList, THashTable, THbookFile, TList, TListOfDataMembers, TListOfEnums, TListOfEnumsWithLock, TListOfFunctions, TListOfFunctionTemplates, TListOfTypes, TMap, TObjArray, TPad, TROOT, TViewPubDataMembers, and TViewPubFunctions.
Definition at line 435 of file TObject.cxx.
|
private |
Function used internally to obtain the template prediction in the individual bins 'bin' <=> 'i' (paper) 'par' <=> 'j' (paper).
Definition at line 761 of file TFractionFitter.cxx.
| TFitResultPtr TFractionFitter::Fit | ( | ) |
Perform the fit with the default UP value.
The value returned is the minimisation status.
Definition at line 557 of file TFractionFitter.cxx.
| Double_t TFractionFitter::GetChisquare | ( | ) | const |
Return the likelihood ratio Chi-squared (chi2) for the fit.
The value is computed when the fit is executed successfully. Chi2 calculation is based on the "likelihood ratio" lambda, lambda = L(y;n) / L(m;n), where L(y;n) is the likelihood of the fit result <y> describing the data <n> and L(m;n) is the likelihood of an unknown "true" underlying distribution <m> describing the data <n>. Since <m> is unknown, the data distribution is used instead, lambda = L(y;n) / L(n;n). Note that this ratio is 1 if the fit is perfect. The chi2 value is then computed according to chi2 = -2*ln(lambda). This parameter can be shown to follow a Chi-square distribution. See for example S. Baker and R. Cousins, "Clarification of the use of chi-square and likelihood functions in fits to histograms", Nucl. Instr. Meth. A221, pp. 437-442 (1984)
Definition at line 887 of file TFractionFitter.cxx.
|
virtualinherited |
Get option used by the graphics system to draw this object.
Note that before calling object.GetDrawOption(), you must have called object.Draw(..) before in the current pad.
Reimplemented in TBrowser, TFitEditor, TGedFrame, TGFileBrowser, TRootBrowser, and TRootBrowserLite.
Definition at line 445 of file TObject.cxx.
|
staticinherited |
Return destructor only flag.
Definition at line 1196 of file TObject.cxx.
| ROOT::Fit::Fitter * TFractionFitter::GetFitter | ( | ) | const |
Give direct access to the underlying fitter class.
This can be used e.g. to modify parameter values or step sizes.
Definition at line 323 of file TFractionFitter.cxx.
|
virtualinherited |
Returns mime type name of object.
Used by the TBrowser (via TGMimeTypes class). Override for class of which you would like to have different icons for objects of the same class.
Reimplemented in ROOT::Experimental::XRooFit::xRooNode, TASImage, TBranch, TBranchElement, TGeoVolume, TGMainFrame, TKey, TMethodBrowsable, TSystemFile, and TVirtualBranchBrowsable.
Definition at line 472 of file TObject.cxx.
Return the adjusted MC template (Aji) for template (parm).
Note that the (Aji) times fractions only sum to the total prediction of the fit if all weights are 1. Note also that the histogram is managed by the TFractionFitter class, so the returned pointer will be invalid if the class is deleted
Definition at line 965 of file TFractionFitter.cxx.
|
virtualinherited |
Returns name of object.
This default method returns the class name. Classes that give objects a name should override this method.
Reimplemented in RooAbsCollection, RooCatType, RooLinkedList, TArchiveMember, TCollection, TEnvRec, TEveGeoNode, TGaxis, TGeoDecayChannel, TGeoShape, TGeoVGShape, TGLEmbeddedViewer, TGLPShapeObj, TGLSAViewer, TGMenuEntry, TGMenuTitle, TGPicture, TGWindow, TIconBoxThumb, TMapFile, TMVA::DataSetInfo, TMVA::FitterBase, TMVA::MethodBase, TMVA::OptionBase, TMVA::PDF, TMVA::Reader, TMVA::VariableTransformBase, TNamed, TObjString, TPad, TPair, TParameter< AParamType >, TParameter< Long64_t >, TParticle, TPave, TPolyMarker3D, TPrimary, TQCommand, TQConnection, TQSlot, TRealData, TSQLClassColumnInfo, TSQLClassInfo, TSQLColumnData, TStatistic, TStructNode, TTreePerfStats, TTVRecord, TTVSession, TVirtualGeoTrack, TVirtualPad, and TXMLAttr.
Definition at line 462 of file TObject.cxx.
| Int_t TFractionFitter::GetNDF | ( | ) | const |
return the number of degrees of freedom in the fit the fNDF parameter has been previously computed during a fit.
The number of degrees of freedom corresponds to the number of points used in the fit minus the number of templates.
Definition at line 898 of file TFractionFitter.cxx.
Returns string containing info about the object at position (px,py).
This method is typically overridden by classes of which the objects can report peculiarities for different positions. Returned string will be re-used (lock in MT environment).
Reimplemented in TASImage, TAxis3D, TColorWheel, TF1, TF2, TFileDrawMap, TGeoNode, TGeoTrack, TGeoVolume, TGL5DDataSet, TGLHistPainter, TGLParametricEquation, TGLTH3Composition, TGraph, TH1, THistPainter, TNode, TPaletteAxis, TParallelCoordVar, and TVirtualHistPainter.
Definition at line 491 of file TObject.cxx.
|
staticinherited |
Get status of object stat flag.
Definition at line 1181 of file TObject.cxx.
|
inlinevirtualinherited |
Reimplemented in TArrow, TAxis3D, TFile, TGaxis, TGeoVolume, TH1, THelix, TLegendEntry, TMapFile, TNode, TPave, TPoints3DABC, TPolyLine3D, TPolyLine, TPolyMarker3D, TPolyMarker, TPSocket, TSelector, TSocket, and TUDPSocket.
| TH1 * TFractionFitter::GetPlot | ( | ) |
Return the "template prediction" corresponding to the fit result (this is not the same as the weighted sum of template distributions, as template statistical uncertainties are taken into account).
Note that the name of this histogram will simply be the same as that of the "data" histogram, prefixed with the string "Fraction fit to hist: ". Note also that the histogram is managed by the TFractionFitter class, so the returned pointer will be invalid if the class is deleted
Definition at line 625 of file TFractionFitter.cxx.
| Double_t TFractionFitter::GetProb | ( | ) | const |
return the fit probability
Definition at line 907 of file TFractionFitter.cxx.
|
private |
Used internally to obtain the bin ranges according to the dimensionality of the histogram and the limits set by hand.
Definition at line 643 of file TFractionFitter.cxx.
Obtain the fit result for parameter <parm> (the parameter numbering follows that of the input template vector).
Definition at line 606 of file TFractionFitter.cxx.
|
virtualinherited |
Returns title of object.
This default method returns the class title (i.e. description). Classes that give objects a title should override this method.
Reimplemented in Axis2, TASImage, TAxis, TBaseClass, TClassMenuItem, TEveGeoNode, TEvePointSet, TGaxis, TGGroupFrame, TGLabel, TGLVEntry, TGTextButton, TGTextEntry, TGTextLBEntry, TKey, TMapFile, TNamed, TPad, TPair, TParallelCoordSelect, TParticle, TPaveLabel, TPrimary, TQCommand, TRootIconList, and TVirtualPad.
Definition at line 507 of file TObject.cxx.
|
virtualinherited |
Return the unique object id.
Definition at line 480 of file TObject.cxx.
Execute action in response of a timer timing out.
This method must be overridden if an object has to react to timers.
Reimplemented in TGCommandPlugin, TGDNDManager, TGFileContainer, TGHtml, TGLEventHandler, TGPopupMenu, TGraphTime, TGScrollBar, TGShutter, TGTextEdit, TGTextEditor, TGTextEntry, TGTextView, TGToolTip, TGuiBldDragManager, TGWindow, and TTreeViewer.
Definition at line 516 of file TObject.cxx.
|
virtualinherited |
Return hash value for this object.
Note: If this routine is overloaded in a derived class, this derived class should also add
Otherwise, when RecursiveRemove is called (by ~TObject or example) for this type of object, the transversal of THashList and THashTable containers will will have to be done without call Hash (and hence be linear rather than logarithmic complexity). You will also see warnings like
Reimplemented in RooLinkedList, TASImagePlugin, TASPluginGS, TCollection, TEnvRec, TGObject, TGPicture, TIconBoxThumb, TImagePlugin, TNamed, TObjString, TPad, TPair, TParameter< AParamType >, TParameter< Long64_t >, TPave, and TStatistic.
Definition at line 539 of file TObject.cxx.
|
inlineinherited |
Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e.
missing call to RecursiveRemove in destructor).
Note: Since the consistency is only tested for during inserts, this routine will return true for object that have never been inserted whether or not they have a consistent setup. This has no negative side-effect as searching for the object with the right or wrong Hash will always yield a not-found answer (Since anyway no hash can be guaranteed unique, there is always a check)
| void TFractionFitter::IncludeBin | ( | Int_t | bin | ) |
Include the given bin in the fit, if it was excluded before using ExcludeBin().
The bin numbering to be used is that of TH1::GetBin().
Definition at line 439 of file TFractionFitter.cxx.
|
virtualinherited |
Issue info message.
Use "location" to specify the method where the warning occurred. Accepts standard printf formatting arguments.
Definition at line 1072 of file TObject.cxx.
|
virtualinherited |
Returns kTRUE if object inherits from class "classname".
Reimplemented in TClass.
Definition at line 549 of file TObject.cxx.
Returns kTRUE if object inherits from TClass cl.
Reimplemented in TClass.
Definition at line 557 of file TObject.cxx.
|
virtualinherited |
Dump contents of this object in a graphics canvas.
Same action as Dump but in a graphical form. In addition pointers to other objects can be followed.
The following picture is the Inspect of a histogram object:
Reimplemented in ROOT::Experimental::XRooFit::xRooNode, TGFrame, TInspectorObject, and TSystemFile.
Definition at line 570 of file TObject.cxx.
|
inlineoverridevirtual |
Reimplemented from TObject.
Definition at line 112 of file TFractionFitter.h.
|
inlineinherited |
IsDestructed.
Default equal comparison (objects are equal if they have the same address in memory).
More complicated classes might want to override this function.
Reimplemented in TGObject, TObjString, TPair, and TQCommand.
Definition at line 589 of file TObject.cxx.
Function for internal use, checking whether the given bin is excluded from the fit or not.
Definition at line 456 of file TFractionFitter.cxx.
|
virtualinherited |
Returns kTRUE in case object contains browsable objects (like containers or lists of other objects).
Reimplemented in ROOT::Experimental::XRooFit::xRooNode, ROOT::Internal::THnBaseBrowsable, TApplicationRemote, TAxis3D, TBaseClass, TBranch, TBranchClones, TBranchElement, TBranchObject, TBranchSTL, TBrowserObject, TCanvas, TClass, TCollection, TDatabasePDG, TDirectory, TFolder, TGeoManager, TGeometry, TGeoNode, TGeoNodeMatrix, TGeoOverlap, TGeoTrack, TGeoVolume, THbookFile, THbookKey, THnBase, TKey, TMapFile, TMultiDimFit, TNode, TPad, TPair, TParticleClassPDG, TPrincipal, TRemoteObject, TROOT, TRootIconList, TSPlot, TSystemDirectory, TTask, TTree, and TVirtualBranchBrowsable.
Definition at line 579 of file TObject.cxx.
|
inlinevirtualinherited |
Reimplemented in RooAbsArg, RooDouble, TCollection, TFileInfo, TGeoBranchArray, TGeoOverlap, TGFSFrameElement, TGLBFrameElement, TNamed, TObjString, TParameter< AParamType >, TParameter< Long64_t >, TPave, TStructNode, TStructNodeProperty, TUri, and TUrl.
|
virtualinherited |
The ls function lists the contents of a class on stdout.
Ls output is typically much less verbose then Dump().
Reimplemented in ROOT::Detail::TSchemaRuleSet, ROOT::Experimental::XRooFit::xRooBrowser, ROOT::TSchemaRule, TAnnotation, TApplication, TBox, TCanvas, TChain, TChainElement, TClass, TClassTree, TCollection, TColor, TDirectory, TDirectoryFile, TEllipse, TFile, TFolder, TFree, TFriendElement, TFunction, TGeometry, TGeoNode, TGFrameElement, TGLayoutHints, THbookFile, THStack, TImage, TKey, TLine, TMapFile, TMarker, TNamed, TNode, TPad, TParameter< AParamType >, TParameter< Long64_t >, TPave, TPolyLine3D, TPolyLine, TPolyMarker3D, TPolyMarker, TQCommand, TQConnection, TQConnectionList, TQSlot, TQUndoManager, TROOT, TStatistic, TStreamerBase, TStreamerElement, TStreamerInfo, TStreamerSTL, TTask, TText, TVirtualPad, and TVirtualStreamerInfo.
Definition at line 598 of file TObject.cxx.
|
inherited |
Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary).
Definition at line 1160 of file TObject.cxx.
|
virtualinherited |
This method must be overridden to handle object notification (the base implementation is no-op).
Different objects in ROOT use the Notify method for different purposes, in coordination with other objects that call this method at the appropriate time.
For example, TLeaf uses it to load class information; TBranchRef to load contents of referenced branches TBranchRef; most notably, based on Notify, TChain implements a callback mechanism to inform interested parties when it switches to a new sub-tree.
Reimplemented in h1analysis, h1analysisTreeReader, TARInterruptHandler, TASInputHandler, TASInterruptHandler, TASLogHandler, TASSigPipeHandler, TBlinkTimer, TBranchElement, TBranchRef, TBreakLineCom, TBrowserTimer, TCollection, TDelCharCom, TDelTextCom, TFileHandler, TGContainerKeyboardTimer, TGContainerScrollTimer, TGInputHandler, TGLRedrawTimer, TGTextEditHist, TGuiBldDragManagerRepeatTimer, TIdleTimer, TInsCharCom, TInsTextCom, TInterruptHandler, TLeafObject, TMessageHandler, TNotifyLink< Type >, TNotifyLink< RNoCleanupNotifierHelper >, TNotifyLink< ROOT::Detail::TBranchProxy >, TNotifyLink< TTreeReader >, TPopupDelayTimer, TProcessEventTimer, TRefTable, TRepeatTimer, TSBRepeatTimer, TSelector, TSelectorDraw, TSelectorEntries, TSignalHandler, TSingleShotCleaner, TSocketHandler, TStdExceptionHandler, TSysEvtHandler, TTermInputHandler, TThreadTimer, TTimeOutTimer, TTimer, TTipDelayTimer, TTree, TTreeFormula, TTreeFormulaManager, TTreeReader, TViewTimer, and TViewUpdateTimer.
Definition at line 618 of file TObject.cxx.
|
inherited |
Use this method to declare a method obsolete.
Specify as of which version the method is obsolete and as from which version it will be removed.
Definition at line 1169 of file TObject.cxx.
|
inherited |
Operator delete for sized deallocation.
Definition at line 1234 of file TObject.cxx.
|
inherited |
Operator delete.
Definition at line 1212 of file TObject.cxx.
|
inherited |
Only called by placement new when throwing an exception.
Definition at line 1266 of file TObject.cxx.
|
inherited |
Operator delete [] for sized deallocation.
Definition at line 1245 of file TObject.cxx.
|
inherited |
Operator delete [].
Definition at line 1223 of file TObject.cxx.
|
inherited |
Only called by placement new[] when throwing an exception.
Definition at line 1274 of file TObject.cxx.
|
inlineinherited |
|
inlineinherited |
|
inlineinherited |
|
virtualinherited |
This method must be overridden if a class wants to paint itself.
The difference between Paint() and Draw() is that when a object draws itself it is added to the display list of the pad in which it is drawn (and automatically redrawn whenever the pad is redrawn). While paint just draws the object without adding it to the pad display list.
Reimplemented in ROOT::Experimental::RTreeMapPainter, ROOT::RGeoPainter, TAnnotation, TArrow, TASImage, TASPaletteEditor::LimitLine, TASPaletteEditor::PaintPalette, TAxis3D, TBits, TBox, TButton, TCanvas, TClassTree, TCollection, TColorWheel, TCrown, TDiamond, TDirectory, TEfficiency, TEllipse, TEveArrow, TEveCaloViz, TEveDigitSet, TEveGeoShape, TEveGeoTopNode, TEvePlot3D, TEvePointSet, TEveProjectionAxes, TEveScene, TEveShape, TEveStraightLineSet, TEveText, TEveTriangleSet, TExec, TF1, TF2, TF3, TFile, TFileDrawMap, TFrame, TGaxis, TGenerator, TGeoBoolNode, TGeoIntersection, TGeoNode, TGeoOverlap, TGeoPainter, TGeoPhysicalNode, TGeoShape, TGeoSubtraction, TGeoTrack, TGeoUnion, TGeoVGShape, TGeoVolume, TGL5DDataSet, TGLHistPainter, TGLParametricEquation, TGLTH3Composition, TGraph2D, TGraph2DPainter, TGraph, TGraphEdge, TGraphNode, TGraphPolargram, TGraphTime, TH1, THistPainter, THStack, TLatex, TLegend, TLine, TMacro, TMarker3DBox, TMarker, TMathText, TMultiGraph, TNode, TNodeDiv, TPad, TPaletteAxis, TParallelCoord, TParallelCoordRange, TParallelCoordVar, TParticle, TPave, TPaveLabel, TPaveStats, TPavesText, TPaveText, TPie, TPolyLine3D, TPolyLine, TPolyMarker3D, TPolyMarker, TPrimary, TRatioPlot, TScatter2D, TScatter, TShape, TSpectrum2Painter, TSpider, TSpline, TSQLFile, TStyle, TText, TTreePerfStats, TVirtualGeoPainter, TVirtualGeoTrack, TVirtualHistPainter, TVirtualPad, TWbox, and TXMLFile.
Definition at line 631 of file TObject.cxx.
|
virtualinherited |
Pop on object drawn in a pad to the top of the display list.
I.e. it will be drawn last and on top of all other primitives.
Reimplemented in TFrame, TPad, and TVirtualPad.
Definition at line 640 of file TObject.cxx.
|
virtualinherited |
This method must be overridden when a class wants to print itself.
Reimplemented in Roo1DTable, RooAbsArg, RooAbsBinning, RooAbsCollection, RooAbsData, RooAbsDataStore, RooAbsGenContext, RooCatType, RooCmdArg, RooCurve, RooEllipse, RooFitResult, RooGenFitStudy, RooHist, RooLinkedList, RooMsgService, RooNumGenConfig, RooNumIntConfig, RooPlot, RooSharedProperties, RooStats::ModelConfig, ROOT::Experimental::REveTrans, ROOT::Experimental::XRooFit::xRooNLLVar::xRooHypoPoint, ROOT::Experimental::XRooFit::xRooNLLVar::xRooHypoSpace, ROOT::Experimental::XRooFit::xRooNode, ROOT::v5::TFormula, RooWorkspace, TAnnotation, TApplicationRemote, TAttParticle, TBenchmark, TBits, TBox, TBranch, TBranchClones, TBranchElement, TBranchObject, TBranchRef, TBranchSTL, TChain, TClassTable, TCling, TCollection, TColor, TDatabasePDG, TDecompBase, TDecompBK, TDecompChol, TDecompLU, TDecompQRH, TDecompSparse, TDecompSVD, TDirectory, TEllipse, TEnv, TEventList, TEveTrans, TF1, TFile, TFileCacheRead, TFileCacheWrite, TFileCollection, TFileInfo, TFileInfoMeta, TFitResult, TFoamCell, TFoamVect, TFormula, TFunction, TGCompositeFrame, TGDMLMatrix, TGeoBatemanSol, TGeoBorderSurface, TGeoBranchArray, TGeoDecayChannel, TGeoElement, TGeoElementRN, TGeoElementTable, TGeoIsotope, TGeoMatrix, TGeoOpticalSurface, TGeoOverlap, TGeoPhysicalNode, TGeoRegion, TGeoSkinSurface, TGeoTessellated, TGeoTrack, TGeoVolume, TGeoVoxelFinder, TGFont, TGFontPool, TGFrame, TGFrameElement, TGGC, TGGCPool, TGLayoutHints, TGMimeTypes, TGPicture, TGPicturePool, TGraph2D, TGraph2DAsymmErrors, TGraph2DErrors, TGraph, TGraphAsymmErrors, TGraphBentErrors, TGraphErrors, TGraphMultiErrors, TGTextEdit, TGWindow, TH1, THashTable, THbookTree, THelix, THnBase, THStack, TInetAddress, TKey, TLegend, TLegendEntry, TLine, TLorentzVector, TMacro, TMapFile, TMarker, TMatrixTBase< Element >, TMatrixTBase< Double_t >, TMatrixTBase< Float_t >, TMemFile, TMessageHandler, TMultiDimFit, TMultiGraph, TMVA::Event, TMVA::Option< T >, TMVA::Option< T * >, TMVA::OptionBase, TMVA::PDEFoamCell, TMVA::PDEFoamVect, TMVA::TNeuron, TNamed, TObjectTable, TObjString, TPad, TParallelCoordRange, TParallelCoordVar, TParameter< AParamType >, TParameter< Long64_t >, TParticle, TParticleClassPDG, TParticlePDG, TPave, TPaveText, TPluginHandler, TPluginManager, TPolyLine3D, TPolyLine, TPolyMarker3D, TPolyMarker, TPrimary, TPrincipal, TQpDataDens, TQpDataSparse, TQpVar, TQSlot, TQuaternion, TRolke, TRootBrowserHistoryCursor, TScatter2D, TScatter, TSpectrum2, TSpectrum3, TSpectrum, TSQLColumnInfo, TSQLFile, TSQLStructure, TSQLTableInfo, TStatistic, TStopwatch, TStreamerInfoActions::TActionSequence, TText, TTree, TTreeCache, TTreeCacheUnzip, TTreeIndex, TTreePerfStats, TUri, TUrl, TVector2, TVector3, TVectorT< Element >, TVectorT< Double_t >, TVectorT< Float_t >, TVirtualPad, TXMLFile, TXTRU, TZIPFile, and TZIPMember.
Definition at line 661 of file TObject.cxx.
|
virtualinherited |
Read contents of object with specified name from the current directory.
First the key with the given name is searched in the current directory, next the key buffer is deserialized into the object. The object must have been created before via the default constructor. See TObject::Write().
Reimplemented in TBuffer, TKey, TKeySQL, and TKeyXML.
Definition at line 673 of file TObject.cxx.
|
virtualinherited |
Recursively remove this object from a list.
Typically implemented by classes that can contain multiple references to a same object.
Reimplemented in RooAbsCollection, RooAbsData, RooLinkedList, RooMCStudy, ROOT::Internal::TCheckHashRecursiveRemoveConsistency, ROOT::RBrowserDataCleanup, RooWorkspace, TBrowser, TChain, TCling, TCollection, TDialogCanvas, TDirectory, TEfficiency, TFileMerger, TFitEditor, TFolder, TFriendElement, TGedEditor, TGeometry, TGFileBrowser, TGraph2D, TGraph, TH1, TH1Editor, TH2Editor, THashList, THistPainter, THStack, TInspectCanvas, TLegend, TList, TListOfDataMembers, TListOfEnums, TListOfEnumsWithLock, TListOfFunctions, TListOfFunctionTemplates, TMultiGraph, TNode, TObjArray, TObjectRefSpy, TObjectSpy, TPad, TProcessID, TROOT, TRootBrowser, TRootBrowserHistory, TRootBrowserLite, TRootContextMenu, TTree, TTreePlayer, TViewPubDataMembers, TViewPubFunctions, and TVirtualPad.
Definition at line 684 of file TObject.cxx.
| void TFractionFitter::ReleaseRangeX | ( | ) |
Release restrictions on the X range of the histogram to be used in the fit.
Definition at line 354 of file TFractionFitter.cxx.
| void TFractionFitter::ReleaseRangeY | ( | ) |
Release restrictions on the Y range of the histogram to be used in the fit.
Definition at line 382 of file TFractionFitter.cxx.
| void TFractionFitter::ReleaseRangeZ | ( | ) |
Release restrictions on the Z range of the histogram to be used in the fit.
Definition at line 412 of file TFractionFitter.cxx.
|
virtualinherited |
Save this object in the file specified by filename.
otherwise the object is written to filename as a CINT/C++ script. The C++ code to rebuild this object is generated via SavePrimitive(). The "option" parameter is passed to SavePrimitive. By default it is an empty string. It can be used to specify the Draw option in the code generated by SavePrimitive.
The function is available via the object context menu.
Reimplemented in ROOT::Experimental::XRooFit::xRooNode, TClassTree, TFolder, TGeoVolume, TGObject, TGraph, TH1, TPad, TPaveClass, TSpline3, TSpline5, TSpline, TTreePerfStats, and TVirtualPad.
Definition at line 708 of file TObject.cxx.
|
virtualinherited |
Save a primitive as a C++ statement(s) on output stream "out".
Reimplemented in TAnnotation, TArc, TArrow, TASImage, TAxis3D, TBox, TButton, TCanvas, TChain, TCrown, TCurlyArc, TCurlyLine, TCutG, TDiamond, TEfficiency, TEllipse, TExec, TF12, TF1, TF2, TF3, TFrame, TGaxis, TGButton, TGButtonGroup, TGCanvas, TGCheckButton, TGColorSelect, TGColumnLayout, TGComboBox, TGCompositeFrame, TGContainer, TGDockableFrame, TGDoubleHSlider, TGDoubleVSlider, TGedMarkerSelect, TGedPatternSelect, TGeoArb8, TGeoBBox, TGeoBoolNode, TGeoCombiTrans, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoCtub, TGeoDecayChannel, TGeoElementRN, TGeoEltu, TGeoGtra, TGeoHalfSpace, TGeoHMatrix, TGeoHype, TGeoIdentity, TGeoIntersection, TGeoMaterial, TGeoMedium, TGeoMixture, TGeoPara, TGeoParaboloid, TGeoPatternCylPhi, TGeoPatternCylR, TGeoPatternParaX, TGeoPatternParaY, TGeoPatternParaZ, TGeoPatternSphPhi, TGeoPatternSphR, TGeoPatternSphTheta, TGeoPatternTrapZ, TGeoPatternX, TGeoPatternY, TGeoPatternZ, TGeoPcon, TGeoPgon, TGeoRotation, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoSubtraction, TGeoTessellated, TGeoTorus, TGeoTranslation, TGeoTrap, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoUnion, TGeoVolume, TGeoXtru, TGFileContainer, TGFont, TGFrame, TGFSComboBox, TGGC, TGGroupFrame, TGHButtonGroup, TGHorizontal3DLine, TGHorizontalFrame, TGHorizontalLayout, TGHProgressBar, TGHScrollBar, TGHSlider, TGHSplitter, TGHtml, TGIcon, TGLabel, TGLayoutHints, TGLineStyleComboBox, TGLineWidthComboBox, TGListBox, TGListDetailsLayout, TGListLayout, TGListTree, TGListView, TGLVContainer, TGMainFrame, TGMatrixLayout, TGMdiFrame, TGMdiMainFrame, TGMdiMenuBar, TGMenuBar, TGMenuTitle, TGNumberEntry, TGNumberEntryField, TGPictureButton, TGPopupMenu, TGProgressBar, TGRadioButton, TGraph2D, TGraph2DAsymmErrors, TGraph2DErrors, TGraph, TGraphAsymmErrors, TGraphBentErrors, TGraphEdge, TGraphErrors, TGraphMultiErrors, TGraphNode, TGraphPolar, TGraphPolargram, TGraphStruct, TGroupButton, TGRowLayout, TGShapedFrame, TGShutter, TGShutterItem, TGSplitFrame, TGStatusBar, TGTab, TGTabLayout, TGTableLayout, TGTableLayoutHints, TGTextButton, TGTextEdit, TGTextEntry, TGTextLBEntry, TGTextView, TGTileLayout, TGToolBar, TGTransientFrame, TGTripleHSlider, TGTripleVSlider, TGVButtonGroup, TGVertical3DLine, TGVerticalFrame, TGVerticalLayout, TGVFileSplitter, TGVProgressBar, TGVScrollBar, TGVSlider, TGVSplitter, TGXYLayout, TGXYLayoutHints, TH1, TH2Poly, THelix, THStack, TLatex, TLegend, TLine, TMacro, TMarker3DBox, TMarker, TMathText, TMultiGraph, TPad, TPaletteAxis, TParallelCoord, TParallelCoordVar, TPave, TPaveClass, TPaveLabel, TPaveStats, TPavesText, TPaveText, TPie, TPieSlice, TPolyLine3D, TPolyLine, TPolyMarker3D, TPolyMarker, TProfile2D, TProfile3D, TProfile, TRootContainer, TRootEmbeddedCanvas, TScatter2D, TScatter, TSlider, TSliderBox, TSpline3, TSpline5, TStyle, TText, TTreePerfStats, and TWbox.
Definition at line 858 of file TObject.cxx.
|
staticprotectedinherited |
Save object constructor in the output stream "out".
Can be used as first statement when implementing SavePrimitive() method for the object
Definition at line 777 of file TObject.cxx.
|
staticprotectedinherited |
Save invocation of primitive Draw() method Skipped if option contains "nodraw" string.
Definition at line 845 of file TObject.cxx.
|
staticprotectedinherited |
Save array in the output stream "out" as vector.
Create unique variable name based on prefix value Returns name of vector which can be used in constructor or in other places of C++ code If flag === kTRUE, just add empty line If flag === 111, check if array is empty and return nullptr or <vectorname>.data()
Definition at line 796 of file TObject.cxx.
Set or unset the user status bits as specified in f.
Definition at line 888 of file TObject.cxx.
| void TFractionFitter::SetData | ( | TH1 * | data | ) |
Change the histogram to be fitted to.
Notes:
Definition at line 275 of file TFractionFitter.cxx.
|
virtualinherited |
Set drawing option for object.
This option only affects the drawing style and is stored in the option field of the TObjOptLink supporting a TPad's primitive list (TList). Note that it does not make sense to call object.SetDrawOption(option) before having called object.Draw().
Reimplemented in RooPlot, TAxis, TBrowser, TGedFrame, TGFrame, TPad, TPaveStats, TRootBrowserLite, TSystemDirectory, and TSystemFile.
Definition at line 871 of file TObject.cxx.
|
staticinherited |
Set destructor only flag.
Definition at line 1204 of file TObject.cxx.
Change the histogram for template number <parm>.
Notes:
Definition at line 287 of file TFractionFitter.cxx.
|
staticinherited |
Turn on/off tracking of objects in the TObjectTable.
Definition at line 1188 of file TObject.cxx.
Set the X range of the histogram to be used in the fit.
Use ReleaseRangeX() to go back to fitting the full histogram. The consistency check ensures that no empty fit range occurs (and also recomputes the bin content integrals).
| [in] | low | lower X bin number |
| [in] | high | upper X bin number |
Definition at line 345 of file TFractionFitter.cxx.
Set the Y range of the histogram to be used in the fit (2D or 3D histograms only).
Use ReleaseRangeY() to go back to fitting the full histogram. The consistency check ensures that no empty fit range occurs (and also recomputes the bin content integrals).
| [in] | low | lower X bin number |
| [in] | high | upper X bin number |
Definition at line 368 of file TFractionFitter.cxx.
Set the Z range of the histogram to be used in the fit (3D histograms only).
Use ReleaseRangeY() to go back to fitting the full histogram. The consistency check ensures that no empty fit range occurs (and also recomputes the bin content integrals).
| [in] | low | lower X bin number |
| [in] | high | upper X bin number |
Definition at line 397 of file TFractionFitter.cxx.
|
virtualinherited |
Set the unique object id.
Definition at line 899 of file TObject.cxx.
Set bin by bin weights for template number <parm> (the parameter numbering follows that of the input template vector).
Weights can be "unset" by passing a null pointer. Consistency of the weights histogram with the data histogram is checked at this point, and an error in case of problems.
Definition at line 302 of file TFractionFitter.cxx.
|
overridevirtual |
Stream an object of class TObject.
Reimplemented from TObject.
|
inline |
Definition at line 112 of file TFractionFitter.h.
|
virtualinherited |
Issue system error message.
Use "location" to specify the method where the system error occurred. Accepts standard printf formatting arguments.
Definition at line 1112 of file TObject.cxx.
| void TFractionFitter::UnConstrain | ( | Int_t | parm | ) |
Remove the constraints on the possible values of parameter <parm>.
Definition at line 476 of file TFractionFitter.cxx.
|
virtualinherited |
|
virtualinherited |
Issue warning message.
Use "location" to specify the method where the warning occurred. Accepts standard printf formatting arguments.
Definition at line 1084 of file TObject.cxx.
|
virtualinherited |
Write this object to the current directory.
For more see the const version of this method.
Reimplemented in ROOT::TBufferMergerFile, TBuffer, TCollection, TDirectory, TDirectoryFile, TFile, TMap, TParallelMergingFile, TSQLFile, TTree, and TXMLFile.
Definition at line 989 of file TObject.cxx.
|
virtualinherited |
Write this object to the current directory.
The data structure corresponding to this object is serialized. The corresponding buffer is written to the current directory with an associated key with name "name".
Writing an object to a file involves the following steps:
Bufsize can be given to force a given buffer size to write this object. By default, the buffersize will be taken from the average buffer size of all objects written to the current file so far.
If a name is specified, it will be the name of the key. If name is not given, the name of the key will be the name as returned by GetName().
The option can be a combination of: kSingleKey, kOverwrite or kWriteDelete Using the kOverwrite option a previous key with the same name is overwritten. The previous key is deleted before writing the new object. Using the kWriteDelete option a previous key with the same name is deleted only after the new object has been written. This option is safer than kOverwrite but it is slower. NOTE: Neither kOverwrite nor kWriteDelete reduces the size of a TFile– the space is simply freed up to be overwritten; in the case of a TTree, it is more complicated. If one opens a TTree, appends some entries, then writes it out, the behaviour is effectively the same. If, however, one creates a new TTree and writes it out in this way, only the metadata is replaced, effectively making the old data invisible without deleting it. TTree::Delete() can be used to mark all disk space occupied by a TTree as free before overwriting its metadata this way. The kSingleKey option is only used by TCollection::Write() to write a container with a single key instead of each object in the container with its own key.
An object is read from the file into memory via TKey::Read() or via TObject::Read().
The function returns the total number of bytes written to the file. It returns 0 if the object cannot be written.
Reimplemented in TBuffer, TCollection, TDirectory, TDirectoryFile, TFile, TMap, TParallelMergingFile, TSQLFile, TTree, and TXMLFile.
Definition at line 964 of file TObject.cxx.
|
protected |
Array of pointers to predictions of real template distributions.
Definition at line 96 of file TFractionFitter.h.
|
privateinherited |
|
protected |
Template fit chisquare.
Definition at line 94 of file TFractionFitter.h.
|
protected |
Pointer to the "data" histogram to be fitted to.
Definition at line 100 of file TFractionFitter.h.
|
protected |
Bins excluded from the fit.
Definition at line 90 of file TFractionFitter.h.
|
protected |
Flags whether a valid fit has been performed.
Definition at line 83 of file TFractionFitter.h.
|
protected |
Pointer to Fitter class.
Definition at line 107 of file TFractionFitter.h.
|
protected |
Template fractions scaled to the "data" histogram statistics.
Definition at line 105 of file TFractionFitter.h.
|
staticprivateinherited |
|
protected |
Last bin in X dimension.
Definition at line 85 of file TFractionFitter.h.
|
protected |
Last bin in Y dimension.
Definition at line 87 of file TFractionFitter.h.
|
protected |
Last bin in Z dimension.
Definition at line 89 of file TFractionFitter.h.
|
protected |
"data" histogram content integral over allowed fit range
Definition at line 103 of file TFractionFitter.h.
|
protected |
Same for template histograms (weights not taken into account).
Definition at line 104 of file TFractionFitter.h.
|
protected |
First bin in X dimension.
Definition at line 84 of file TFractionFitter.h.
|
protected |
First bin in Y dimension.
Definition at line 86 of file TFractionFitter.h.
|
protected |
First bin in Z dimension.
Definition at line 88 of file TFractionFitter.h.
|
protected |
Array of pointers to template histograms.
Definition at line 101 of file TFractionFitter.h.
|
protected |
Number of degrees of freedom in the fit.
Definition at line 93 of file TFractionFitter.h.
|
protected |
number of fit parameters
Definition at line 110 of file TFractionFitter.h.
|
protected |
Number of points used in the fit.
Definition at line 92 of file TFractionFitter.h.
|
protected |
Pointer to histogram containing summed template predictions.
Definition at line 106 of file TFractionFitter.h.
|
privateinherited |
|
protected |
Array of pointers to corresponding weight factors (may be null).
Definition at line 102 of file TFractionFitter.h.
