Base abstract class for all shapes.
Shapes are geometrical objects that provide the basic modelling functionality. They provide the definition of the LOCAL frame of coordinates, with respect to which they are defined. Any implementation of a shape deriving from the base TGeoShape class has to provide methods for :
The modeler currently provides a set of 16 basic shapes, which we will call primitives. It also provides a special class allowing the creation of shapes made as a result of boolean operations between primitives. These are called composite shapes and the composition operation can be recursive (composition of composites). This allows the creation of a quite large number of different shape topologies and combinations.
Named shapes register themselves to the manager class at creation time. The manager is responsible for their final deletion. Shapes can be created using their default constructor if their retrieval by name is not needed, but in this case they are owned by the user. A shape may be referenced by several volumes, therefore its deletion is not possible once volumes were defined based on it.
Shape objects embed only the minimum set of parameters that are fully describing a valid physical shape. For instance, a tube is represented by its half length, the minimum radius and the maximum radius. Shapes are used together with media in order to create volumes, which in their turn are the main components of the geometrical tree. A specific shape can be created stand-alone :
Sometimes it is much easier to create a volume having a given shape in one step, since shapes are not directly linked in the geometrical tree but volumes are :
Note that global queries related to a geometry are handled by the manager class. However, shape-related queries might be sometimes useful.
Bool_t TGeoShape::Contains(const Double_t *point[3])
this method returns true if POINT is actually inside the shape. The point has to be defined in the local shape reference. For instance, for a box having DX, DY and DZ half-lengths a point will be considered inside if :
Double_t TGeoShape::DistFromInside(Double_t *point[3], Double_t *dir[3], Int_t iact, Double_t step, Double_t *safe)
computes the distance to exiting a shape from a given point INSIDE, along a given direction. The direction is given by its director cosines with respect to the local shape coordinate system. This method provides additional information according the value of IACT input parameter :
Double_t TGeoShape::DistFromOutside(Double_t *point[3], Double_t *dir[3], Int_t iact, Double_t step, Double_t *safe)
computes the distance to entering a shape from a given point OUTSIDE. Acts in the same way as B).
Double_t Safety(const Double_t *point[3], Bool_t inside)
compute maximum shift of a point in any direction that does not change its INSIDE/OUTSIDE state (does not cross shape boundaries). The state of the point have to be properly supplied.
Double_t *Normal(Double_t *point[3], Double_t *dir[3], Bool_t inside)
returns director cosines of normal to the crossed shape surface from a given point towards a direction. One has to specify if the point is inside or outside shape. According to this, the normal will be outwards or inwards shape respectively. Normal components are statically stored by shape class, so it has to be copied after retrieval in a different array.
Shapes can generally be divided along a given axis. Supported axis are X, Y, Z, Rxy, Phi, Rxyz. A given shape cannot be divided however on any axis. The general rule is that that divisions are possible on whatever axis that produces still known shapes as slices. The division of shapes should not be performed by TGeoShape::Divide() calls, but rather by TGeoVolume::Divide(). The algorithm for dividing a specific shape is known by the shape object, but is always invoked in a generic way from the volume level. Details on how to do that can be found in TGeoVolume class. One can see how all division options are interpreted and which is their result inside specific shape classes.
Definition at line 25 of file TGeoShape.h.
Public Types | |
enum | EShapeType { kBitMask32 = 0xffffffff , kGeoNoShape = 0 , kGeoBad = (1ULL << ( 0 )) , kGeoRSeg = (1ULL << ( 1 )) , kGeoPhiSeg = (1ULL << ( 2 )) , kGeoThetaSeg = (1ULL << ( 3 )) , kGeoVisX = (1ULL << ( 4 )) , kGeoVisY = (1ULL << ( 5 )) , kGeoVisZ = (1ULL << ( 6 )) , kGeoRunTimeShape = (1ULL << ( 7 )) , kGeoInvalidShape = (1ULL << ( 8 )) , kGeoTorus = (1ULL << ( 9 )) , kGeoBox = (1ULL << ( 10 )) , kGeoPara = (1ULL << ( 11 )) , kGeoSph = (1ULL << ( 12 )) , kGeoTube = (1ULL << ( 13 )) , kGeoTubeSeg = (1ULL << ( 14 )) , kGeoCone = (1ULL << ( 15 )) , kGeoConeSeg = (1ULL << ( 16 )) , kGeoPcon = (1ULL << ( 17 )) , kGeoPgon = (1ULL << ( 18 )) , kGeoArb8 = (1ULL << ( 19 )) , kGeoEltu = (1ULL << ( 20 )) , kGeoTrap = (1ULL << ( 21 )) , kGeoCtub = (1ULL << ( 22 )) , kGeoTrd1 = (1ULL << ( 23 )) , kGeoTrd2 = (1ULL << ( 24 )) , kGeoComb = (1ULL << ( 25 )) , kGeoClosedShape = (1ULL << ( 26 )) , kGeoXtru = (1ULL << ( 27 )) , kGeoParaboloid = (1ULL << ( 28 )) , kGeoHalfSpace = (1ULL << ( 29 )) , kGeoHype = (1ULL << ( 30 )) , kGeoSavePrimitive = (1ULL << ( 20 )) } |
Public Types inherited from TObject | |
enum | { kIsOnHeap = 0x01000000 , kNotDeleted = 0x02000000 , kZombie = 0x04000000 , kInconsistent = 0x08000000 , kBitMask = 0x00ffffff } |
enum | { kSingleKey = (1ULL << ( 0 )) , kOverwrite = (1ULL << ( 1 )) , kWriteDelete = (1ULL << ( 2 )) } |
enum | EDeprecatedStatusBits { kObjInCanvas = (1ULL << ( 3 )) } |
enum | EStatusBits { kCanDelete = (1ULL << ( 0 )) , kMustCleanup = (1ULL << ( 3 )) , kIsReferenced = (1ULL << ( 4 )) , kHasUUID = (1ULL << ( 5 )) , kCannotPick = (1ULL << ( 6 )) , kNoContextMenu = (1ULL << ( 8 )) , kInvalidObject = (1ULL << ( 13 )) } |
Public Member Functions | |
TGeoShape () | |
Default constructor. | |
TGeoShape (const char *name) | |
Default constructor. | |
virtual | ~TGeoShape () |
Destructor. | |
virtual void | AfterStreamer () |
virtual Double_t | Capacity () const =0 |
void | CheckShape (Int_t testNo, Int_t nsamples=10000, Option_t *option="") |
Test for shape navigation methods. | |
virtual void | ClearThreadData () const |
virtual void | ComputeBBox ()=0 |
virtual void | ComputeNormal (const Double_t *point, const Double_t *dir, Double_t *norm)=0 |
virtual void | ComputeNormal_v (const Double_t *, const Double_t *, Double_t *, Int_t) |
virtual Bool_t | Contains (const Double_t *point) const =0 |
virtual void | Contains_v (const Double_t *, Bool_t *, Int_t) const |
virtual Bool_t | CouldBeCrossed (const Double_t *point, const Double_t *dir) const =0 |
virtual void | CreateThreadData (Int_t) |
virtual Int_t | DistancetoPrimitive (Int_t px, Int_t py)=0 |
Computes distance from point (px,py) to the object. | |
virtual Double_t | DistFromInside (const Double_t *point, const Double_t *dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const =0 |
virtual void | DistFromInside_v (const Double_t *, const Double_t *, Double_t *, Int_t, Double_t *) const |
virtual Double_t | DistFromOutside (const Double_t *point, const Double_t *dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const =0 |
virtual void | DistFromOutside_v (const Double_t *, const Double_t *, Double_t *, Int_t, Double_t *) const |
virtual TGeoVolume * | Divide (TGeoVolume *voldiv, const char *divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step)=0 |
virtual void | Draw (Option_t *option="") |
Draw this shape. | |
virtual void | ExecuteEvent (Int_t event, Int_t px, Int_t py) |
Execute mouse actions on this shape. | |
virtual const char * | GetAxisName (Int_t iaxis) const =0 |
virtual Double_t | GetAxisRange (Int_t iaxis, Double_t &xlo, Double_t &xhi) const =0 |
virtual void | GetBoundingCylinder (Double_t *param) const =0 |
virtual const TBuffer3D & | GetBuffer3D (Int_t reqSections, Bool_t localFrame) const |
Stub implementation to avoid forcing implementation at this stage. | |
virtual Int_t | GetByteCount () const =0 |
virtual Int_t | GetFittingBox (const TGeoBBox *parambox, TGeoMatrix *mat, Double_t &dx, Double_t &dy, Double_t &dz) const =0 |
Int_t | GetId () const |
virtual TGeoShape * | GetMakeRuntimeShape (TGeoShape *mother, TGeoMatrix *mat) const =0 |
virtual void | GetMeshNumbers (Int_t &, Int_t &, Int_t &) const |
virtual const char * | GetName () const |
Get the shape name. | |
virtual Int_t | GetNmeshVertices () const |
const char * | GetPointerName () const |
Provide a pointer name containing uid. | |
virtual Bool_t | GetPointsOnSegments (Int_t npoints, Double_t *array) const =0 |
virtual void | InspectShape () const =0 |
void | InvertShapeBit (UInt_t f) |
virtual TClass * | IsA () const |
virtual Bool_t | IsAssembly () const |
virtual Bool_t | IsComposite () const |
virtual Bool_t | IsCylType () const =0 |
virtual Bool_t | IsReflected () const |
Bool_t | IsRunTimeShape () const |
Bool_t | IsValid () const |
virtual Bool_t | IsValidBox () const =0 |
virtual Bool_t | IsVecGeom () const |
virtual TBuffer3D * | MakeBuffer3D () const |
virtual void | Paint (Option_t *option="") |
Paint this shape. | |
void | ResetShapeBit (UInt_t f) |
virtual Double_t | Safety (const Double_t *point, Bool_t in=kTRUE) const =0 |
virtual void | Safety_v (const Double_t *, const Bool_t *, Double_t *, Int_t) const |
virtual void | SetDimensions (Double_t *param)=0 |
void | SetId (Int_t id) |
virtual void | SetPoints (Double_t *points) const =0 |
virtual void | SetPoints (Float_t *points) const =0 |
void | SetRuntime (Bool_t flag=kTRUE) |
virtual void | SetSegsAndPols (TBuffer3D &buff) const =0 |
void | SetShapeBit (UInt_t f) |
void | SetShapeBit (UInt_t f, Bool_t set) |
Equivalent of TObject::SetBit. | |
Int_t | ShapeDistancetoPrimitive (Int_t numpoints, Int_t px, Int_t py) const |
Returns distance to shape primitive mesh. | |
virtual void | Sizeof3D () const =0 |
virtual void | Streamer (TBuffer &) |
Stream an object of class TObject. | |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
Bool_t | TestShapeBit (UInt_t f) const |
Int_t | TestShapeBits (UInt_t f) const |
Public Member Functions inherited from TNamed | |
TNamed () | |
TNamed (const char *name, const char *title) | |
TNamed (const TNamed &named) | |
TNamed copy ctor. | |
TNamed (const TString &name, const TString &title) | |
virtual | ~TNamed () |
TNamed destructor. | |
void | Clear (Option_t *option="") override |
Set name and title to empty strings (""). | |
TObject * | Clone (const char *newname="") const override |
Make a clone of an object using the Streamer facility. | |
Int_t | Compare (const TObject *obj) const override |
Compare two TNamed objects. | |
void | Copy (TObject &named) const override |
Copy this to obj. | |
virtual void | FillBuffer (char *&buffer) |
Encode TNamed into output buffer. | |
const char * | GetName () const override |
Returns name of object. | |
const char * | GetTitle () const override |
Returns title of object. | |
ULong_t | Hash () const override |
Return hash value for this object. | |
TClass * | IsA () const override |
Bool_t | IsSortable () const override |
void | ls (Option_t *option="") const override |
List TNamed name and title. | |
TNamed & | operator= (const TNamed &rhs) |
TNamed assignment operator. | |
void | Print (Option_t *option="") const override |
Print TNamed name and title. | |
virtual void | SetName (const char *name) |
Set the name of the TNamed. | |
virtual void | SetNameTitle (const char *name, const char *title) |
Set all the TNamed parameters (name and title). | |
virtual void | SetTitle (const char *title="") |
Set the title of the TNamed. | |
virtual Int_t | Sizeof () const |
Return size of the TNamed part of the TObject. | |
void | Streamer (TBuffer &) override |
Stream an object of class TObject. | |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
Public Member Functions inherited from TObject | |
TObject () | |
TObject constructor. | |
TObject (const TObject &object) | |
TObject copy ctor. | |
virtual | ~TObject () |
TObject destructor. | |
void | AbstractMethod (const char *method) const |
Use this method to implement an "abstract" method that you don't want to leave purely abstract. | |
virtual void | AppendPad (Option_t *option="") |
Append graphics object to current pad. | |
virtual void | Browse (TBrowser *b) |
Browse object. May be overridden for another default action. | |
ULong_t | CheckedHash () |
Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object. | |
virtual const char * | ClassName () const |
Returns name of class to which the object belongs. | |
virtual void | Delete (Option_t *option="") |
Delete this object. | |
virtual void | DrawClass () const |
Draw class inheritance tree of the class to which this object belongs. | |
virtual TObject * | DrawClone (Option_t *option="") const |
Draw a clone of this object in the current selected pad with: gROOT->SetSelectedPad(c1) . | |
virtual void | Dump () const |
Dump contents of object on stdout. | |
virtual void | Error (const char *method, const char *msgfmt,...) const |
Issue error message. | |
virtual void | Execute (const char *method, const char *params, Int_t *error=nullptr) |
Execute method on this object with the given parameter string, e.g. | |
virtual void | Execute (TMethod *method, TObjArray *params, Int_t *error=nullptr) |
Execute method on this object with parameters stored in the TObjArray. | |
virtual void | Fatal (const char *method, const char *msgfmt,...) const |
Issue fatal error message. | |
virtual TObject * | FindObject (const char *name) const |
Must be redefined in derived classes. | |
virtual TObject * | FindObject (const TObject *obj) const |
Must be redefined in derived classes. | |
virtual Option_t * | GetDrawOption () const |
Get option used by the graphics system to draw this object. | |
virtual const char * | GetIconName () const |
Returns mime type name of object. | |
virtual char * | GetObjectInfo (Int_t px, Int_t py) const |
Returns string containing info about the object at position (px,py). | |
virtual Option_t * | GetOption () const |
virtual UInt_t | GetUniqueID () const |
Return the unique object id. | |
virtual Bool_t | HandleTimer (TTimer *timer) |
Execute action in response of a timer timing out. | |
Bool_t | HasInconsistentHash () const |
Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e. | |
virtual void | Info (const char *method, const char *msgfmt,...) const |
Issue info message. | |
virtual Bool_t | InheritsFrom (const char *classname) const |
Returns kTRUE if object inherits from class "classname". | |
virtual Bool_t | InheritsFrom (const TClass *cl) const |
Returns kTRUE if object inherits from TClass cl. | |
virtual void | Inspect () const |
Dump contents of this object in a graphics canvas. | |
void | InvertBit (UInt_t f) |
Bool_t | IsDestructed () const |
IsDestructed. | |
virtual Bool_t | IsEqual (const TObject *obj) const |
Default equal comparison (objects are equal if they have the same address in memory). | |
virtual Bool_t | IsFolder () const |
Returns kTRUE in case object contains browsable objects (like containers or lists of other objects). | |
R__ALWAYS_INLINE Bool_t | IsOnHeap () const |
R__ALWAYS_INLINE Bool_t | IsZombie () const |
void | MayNotUse (const char *method) const |
Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary). | |
virtual Bool_t | Notify () |
This method must be overridden to handle object notification. | |
void | Obsolete (const char *method, const char *asOfVers, const char *removedFromVers) const |
Use this method to declare a method obsolete. | |
void | operator delete (void *ptr) |
Operator delete. | |
void | operator delete[] (void *ptr) |
Operator delete []. | |
void * | operator new (size_t sz) |
void * | operator new (size_t sz, void *vp) |
void * | operator new[] (size_t sz) |
void * | operator new[] (size_t sz, void *vp) |
TObject & | operator= (const TObject &rhs) |
TObject assignment operator. | |
virtual void | Pop () |
Pop on object drawn in a pad to the top of the display list. | |
virtual Int_t | Read (const char *name) |
Read contents of object with specified name from the current directory. | |
virtual void | RecursiveRemove (TObject *obj) |
Recursively remove this object from a list. | |
void | ResetBit (UInt_t f) |
virtual void | SaveAs (const char *filename="", Option_t *option="") const |
Save this object in the file specified by filename. | |
virtual void | SavePrimitive (std::ostream &out, Option_t *option="") |
Save a primitive as a C++ statement(s) on output stream "out". | |
void | SetBit (UInt_t f) |
void | SetBit (UInt_t f, Bool_t set) |
Set or unset the user status bits as specified in f. | |
virtual void | SetDrawOption (Option_t *option="") |
Set drawing option for object. | |
virtual void | SetUniqueID (UInt_t uid) |
Set the unique object id. | |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
virtual void | SysError (const char *method, const char *msgfmt,...) const |
Issue system error message. | |
R__ALWAYS_INLINE Bool_t | TestBit (UInt_t f) const |
Int_t | TestBits (UInt_t f) const |
virtual void | UseCurrentStyle () |
Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked. | |
virtual void | Warning (const char *method, const char *msgfmt,...) const |
Issue warning message. | |
virtual Int_t | Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) |
Write this object to the current directory. | |
virtual Int_t | Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) const |
Write this object to the current directory. | |
Static Public Member Functions | |
static Double_t | Big () |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static Double_t | ComputeEpsMch () |
Compute machine round-off double precision error as the smallest number that if added to 1.0 is different than 1.0. | |
static const char * | DeclFileName () |
static Double_t | DistToPhiMin (const Double_t *point, const Double_t *dir, Double_t s1, Double_t c1, Double_t s2, Double_t c2, Double_t sm, Double_t cm, Bool_t in=kTRUE) |
compute distance from point (inside phi) to both phi planes. Return minimum. | |
static Double_t | EpsMch () |
static function returning the machine round-off error | |
static TGeoMatrix * | GetTransform () |
Returns current transformation matrix that applies to shape. | |
static Bool_t | IsCloseToPhi (Double_t epsil, const Double_t *point, Double_t c1, Double_t s1, Double_t c2, Double_t s2) |
True if point is closer than epsil to one of the phi planes defined by c1,s1 or c2,s2. | |
static Bool_t | IsCrossingSemiplane (const Double_t *point, const Double_t *dir, Double_t cphi, Double_t sphi, Double_t &snext, Double_t &rxy) |
Compute distance from POINT to semiplane defined by PHI angle along DIR. | |
static Bool_t | IsInPhiRange (const Double_t *point, Double_t phi1, Double_t phi2) |
Static method to check if a point is in the phi range (phi1, phi2) [degrees]. | |
static Bool_t | IsSameWithinTolerance (Double_t a, Double_t b) |
Check if two numbers differ with less than a tolerance. | |
static Bool_t | IsSegCrossing (Double_t x1, Double_t y1, Double_t x2, Double_t y2, Double_t x3, Double_t y3, Double_t x4, Double_t y4) |
Check if segments (A,B) and (C,D) are crossing, where: A(x1,y1), B(x2,y2), C(x3,y3), D(x4,y4) | |
static void | NormalPhi (const Double_t *point, const Double_t *dir, Double_t *norm, Double_t c1, Double_t s1, Double_t c2, Double_t s2) |
Static method to compute normal to phi planes. | |
static Double_t | SafetyPhi (const Double_t *point, Bool_t in, Double_t phi1, Double_t phi2) |
Static method to compute safety w.r.t a phi corner defined by cosines/sines of the angles phi1, phi2. | |
static Double_t | SafetySeg (Double_t r, Double_t z, Double_t r1, Double_t z1, Double_t r2, Double_t z2, Bool_t outer) |
Compute distance from point of coordinates (r,z) to segment (r1,z1):(r2,z2) | |
static void | SetTransform (TGeoMatrix *matrix) |
Set current transformation matrix that applies to shape. | |
static Double_t | Tolerance () |
Static Public Member Functions inherited from TNamed | |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static const char * | DeclFileName () |
Static Public Member Functions inherited from TObject | |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static const char * | DeclFileName () |
static Longptr_t | GetDtorOnly () |
Return destructor only flag. | |
static Bool_t | GetObjectStat () |
Get status of object stat flag. | |
static void | SetDtorOnly (void *obj) |
Set destructor only flag. | |
static void | SetObjectStat (Bool_t stat) |
Turn on/off tracking of objects in the TObjectTable. | |
Protected Member Functions | |
virtual void | FillBuffer3D (TBuffer3D &buffer, Int_t reqSections, Bool_t localFrame) const |
Fill the supplied buffer, with sections in desired frame See TBuffer3D.h for explanation of sections, frame etc. | |
Int_t | GetBasicColor () const |
Get the basic color (0-7). | |
void | SetOnBoundary (Bool_t) |
void | TransformPoints (Double_t *points, UInt_t NbPoints) const |
Tranform a set of points (LocalToMaster) | |
Protected Member Functions inherited from TObject | |
virtual void | DoError (int level, const char *location, const char *fmt, va_list va) const |
Interface to ErrorHandler (protected). | |
void | MakeZombie () |
Protected Attributes | |
UInt_t | fShapeBits |
Int_t | fShapeId |
Protected Attributes inherited from TNamed | |
TString | fName |
TString | fTitle |
Static Private Attributes | |
static Double_t | fgEpsMch = 2.220446049250313e-16 |
static TGeoMatrix * | fgTransform = NULL |
Additional Inherited Members | |
Protected Types inherited from TObject | |
enum | { kOnlyPrepStep = (1ULL << ( 3 )) } |
#include <TGeoShape.h>
Definition at line 31 of file TGeoShape.h.
TGeoShape::TGeoShape | ( | ) |
Default constructor.
Definition at line 165 of file TGeoShape.cxx.
TGeoShape::TGeoShape | ( | const char * | name | ) |
Default constructor.
Definition at line 180 of file TGeoShape.cxx.
|
virtual |
Destructor.
Definition at line 196 of file TGeoShape.cxx.
|
inlinevirtual |
Reimplemented in TGeoConeSeg, TGeoTessellated, and TGeoTubeSeg.
Definition at line 94 of file TGeoShape.h.
|
inlinestatic |
Definition at line 88 of file TGeoShape.h.
|
pure virtual |
Implemented in TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
Test for shape navigation methods.
Summary for test numbers:
Definition at line 209 of file TGeoShape.cxx.
|
static |
|
inlinestaticconstexpr |
Definition at line 167 of file TGeoShape.h.
|
inlinevirtual |
Reimplemented in TGeoCompositeShape, TGeoPgon, and TGeoXtru.
Definition at line 67 of file TGeoShape.h.
|
pure virtual |
Implemented in TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
|
static |
Compute machine round-off double precision error as the smallest number that if added to 1.0 is different than 1.0.
Definition at line 223 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
|
inlinevirtual |
Reimplemented in TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoXtru.
Definition at line 99 of file TGeoShape.h.
Implemented in TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
Reimplemented in TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoXtru.
Definition at line 101 of file TGeoShape.h.
|
pure virtual |
Implemented in TGeoBBox, and TGeoVGShape.
|
inlinevirtual |
Reimplemented in TGeoCompositeShape, TGeoPgon, and TGeoXtru.
Definition at line 68 of file TGeoShape.h.
|
inlinestatic |
Definition at line 167 of file TGeoShape.h.
Computes distance from point (px,py) to the object.
This member function must be implemented for each graphics primitive. This default function returns a big number (999999).
Reimplemented from TObject.
Implemented in TGeoTessellated, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTube, TGeoTubeSeg, TGeoXtru, and TGeoVGShape.
|
pure virtual |
Implemented in TGeoArb8, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
|
inlinevirtual |
Reimplemented in TGeoArb8, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoXtru.
Definition at line 106 of file TGeoShape.h.
|
pure virtual |
Implemented in TGeoArb8, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
|
inlinevirtual |
Reimplemented in TGeoArb8, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoXtru.
Definition at line 109 of file TGeoShape.h.
|
static |
compute distance from point (inside phi) to both phi planes. Return minimum.
Definition at line 405 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoVGShape, TGeoArb8, TGeoTrap, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, and TGeoCtub.
|
virtual |
Draw this shape.
Reimplemented from TObject.
Reimplemented in TGeoVGShape.
Definition at line 721 of file TGeoShape.cxx.
|
static |
static function returning the machine round-off error
Definition at line 240 of file TGeoShape.cxx.
Execute mouse actions on this shape.
Reimplemented from TObject.
Definition at line 711 of file TGeoShape.cxx.
|
protectedvirtual |
Fill the supplied buffer, with sections in desired frame See TBuffer3D.h for explanation of sections, frame etc.
Reimplemented in TGeoBBox, TEveGeoPolyShape, and ROOT::Experimental::REveGeoPolyShape.
Definition at line 589 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoBBox, TGeoCone, TGeoPcon, TGeoSphere, TGeoTorus, TGeoTube, and TGeoVGShape.
|
pure virtual |
Implemented in TGeoArb8, TGeoBBox, TGeoCone, TGeoConeSeg, TGeoHype, TGeoPara, TGeoPcon, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoVGShape.
|
protected |
Get the basic color (0-7).
Definition at line 673 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoCompositeShape, TGeoHalfSpace, TGeoArb8, TGeoBBox, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, and TGeoVGShape.
Stub implementation to avoid forcing implementation at this stage.
Reimplemented in TGeoTessellated, TGeoBBox, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHype, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoSphere, TGeoTorus, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, TGeoVGShape, TEveGeoPolyShape, and ROOT::Experimental::REveGeoPolyShape.
Definition at line 689 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoArb8, TGeoBBox, TGeoCone, TGeoConeSeg, TGeoHype, TGeoPara, TGeoPcon, TGeoPgon, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoVGShape.
|
inline |
Definition at line 123 of file TGeoShape.h.
|
pure virtual |
Implemented in TGeoArb8, TGeoCompositeShape, TGeoHalfSpace, TGeoPcon, TGeoPgon, TGeoSphere, TGeoXtru, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHype, TGeoPara, TGeoParaboloid, TGeoScaledShape, TGeoShapeAssembly, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoVGShape.
Reimplemented in TGeoTessellated, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
Definition at line 125 of file TGeoShape.h.
|
virtual |
Get the shape name.
Reimplemented from TObject.
Reimplemented in TGeoVGShape.
Definition at line 248 of file TGeoShape.cxx.
|
inlinevirtual |
Reimplemented in TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
Definition at line 127 of file TGeoShape.h.
const char * TGeoShape::GetPointerName | ( | ) | const |
Provide a pointer name containing uid.
Definition at line 699 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoBBox, TGeoCone, TGeoConeSeg, TGeoPgon, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoVGShape, TGeoCompositeShape, TGeoEltu, TGeoHype, TGeoParaboloid, TGeoPcon, TGeoSphere, and TGeoTorus.
|
static |
Returns current transformation matrix that applies to shape.
Definition at line 536 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
|
inline |
Definition at line 165 of file TGeoShape.h.
|
inlinevirtual |
Reimplemented from TObject.
Reimplemented in TGeoArb8, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoXtru.
Definition at line 167 of file TGeoShape.h.
|
inlinevirtual |
Reimplemented in TGeoScaledShape, TGeoShapeAssembly, and TGeoVGShape.
Definition at line 129 of file TGeoShape.h.
|
static |
True if point is closer than epsil to one of the phi planes defined by c1,s1 or c2,s2.
Definition at line 269 of file TGeoShape.cxx.
|
inlinevirtual |
Reimplemented in TGeoCompositeShape, and TGeoVGShape.
Definition at line 130 of file TGeoShape.h.
|
static |
Compute distance from POINT to semiplane defined by PHI angle along DIR.
Computes also radius at crossing point. This might be negative in case the crossing is on the other side of the semiplane.
Definition at line 297 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, and TGeoVGShape.
Static method to check if a point is in the phi range (phi1, phi2) [degrees].
Definition at line 283 of file TGeoShape.cxx.
|
inlinevirtual |
Reimplemented in TGeoScaledShape, and TGeoVGShape.
Definition at line 137 of file TGeoShape.h.
|
inline |
Definition at line 139 of file TGeoShape.h.
Check if two numbers differ with less than a tolerance.
Definition at line 326 of file TGeoShape.cxx.
|
static |
Check if segments (A,B) and (C,D) are crossing, where: A(x1,y1), B(x2,y2), C(x3,y3), D(x4,y4)
Definition at line 336 of file TGeoShape.cxx.
|
inline |
Definition at line 140 of file TGeoShape.h.
|
pure virtual |
Implemented in TGeoBBox, and TGeoVGShape.
|
inlinevirtual |
Reimplemented in TGeoVGShape.
Definition at line 138 of file TGeoShape.h.
|
inlinevirtual |
Reimplemented in TGeoBBox, TGeoCone, TGeoConeSeg, TGeoHype, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTube, TGeoTubeSeg, TGeoXtru, TGeoVGShape, TEveGeoPolyShape, and ROOT::Experimental::REveGeoPolyShape.
Definition at line 143 of file TGeoShape.h.
|
static |
Static method to compute normal to phi planes.
Definition at line 437 of file TGeoShape.cxx.
|
virtual |
Paint this shape.
Reimplemented from TObject.
Reimplemented in TGeoVGShape.
Definition at line 734 of file TGeoShape.cxx.
|
inline |
Definition at line 162 of file TGeoShape.h.
Implemented in TGeoArb8, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
|
inlinevirtual |
Reimplemented in TGeoArb8, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoXtru.
Definition at line 147 of file TGeoShape.h.
|
static |
Static method to compute safety w.r.t a phi corner defined by cosines/sines of the angles phi1, phi2.
Definition at line 464 of file TGeoShape.cxx.
|
static |
Compute distance from point of coordinates (r,z) to segment (r1,z1):(r2,z2)
Definition at line 494 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoCompositeShape, TGeoArb8, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
|
inline |
Definition at line 151 of file TGeoShape.h.
|
inlineprotected |
Definition at line 77 of file TGeoShape.h.
|
pure virtual |
Implemented in TGeoTessellated, TGeoHalfSpace, TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
|
pure virtual |
Implemented in TGeoHalfSpace, TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, TGeoXtru, and TGeoVGShape.
Definition at line 155 of file TGeoShape.h.
|
pure virtual |
Implemented in TGeoHype, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoShapeAssembly, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTube, TGeoTubeSeg, TGeoXtru, TGeoVGShape, TGeoBBox, TGeoCone, TGeoConeSeg, and TGeoScaledShape.
|
inline |
Definition at line 161 of file TGeoShape.h.
Equivalent of TObject::SetBit.
Definition at line 524 of file TGeoShape.cxx.
|
static |
Set current transformation matrix that applies to shape.
Definition at line 544 of file TGeoShape.cxx.
Returns distance to shape primitive mesh.
Definition at line 259 of file TGeoShape.cxx.
|
pure virtual |
Implemented in TGeoArb8, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoXtru, and TGeoVGShape.
|
virtual |
Stream an object of class TObject.
Reimplemented from TObject.
Reimplemented in TGeoArb8, TGeoTrap, TGeoGtra, TGeoBBox, TGeoCompositeShape, TGeoCone, TGeoConeSeg, TGeoEltu, TGeoHalfSpace, TGeoHype, TGeoPara, TGeoParaboloid, TGeoPcon, TGeoPgon, TGeoScaledShape, TGeoShapeAssembly, TGeoSphere, TGeoTessellated, TGeoTorus, TGeoTrd1, TGeoTrd2, TGeoTube, TGeoTubeSeg, TGeoCtub, and TGeoXtru.
|
inline |
Definition at line 167 of file TGeoShape.h.
Definition at line 163 of file TGeoShape.h.
Definition at line 164 of file TGeoShape.h.
|
inlinestatic |
Definition at line 91 of file TGeoShape.h.
Tranform a set of points (LocalToMaster)
Definition at line 552 of file TGeoShape.cxx.
Definition at line 29 of file TGeoShape.h.
|
staticprivate |
Definition at line 28 of file TGeoShape.h.
|
protected |
Definition at line 73 of file TGeoShape.h.
|
protected |
Definition at line 72 of file TGeoShape.h.