A twisted trapezoid.
A twisted trapezoid is a general trapezoid defined in the same way but that is twisted along the Z-axis. The twist is defined as the rotation angle between the lower and the higher Z faces.
Definition at line 145 of file TGeoArb8.h.
Public Member Functions | |
TGeoGtra () | |
Default ctor. | |
TGeoGtra (const char *name, Double_t dz, Double_t theta, Double_t phi, Double_t twist, Double_t h1, Double_t bl1, Double_t tl1, Double_t alpha1, Double_t h2, Double_t bl2, Double_t tl2, Double_t alpha2) | |
Constructor providing the name of the shape. | |
TGeoGtra (Double_t dz, Double_t theta, Double_t phi, Double_t twist, Double_t h1, Double_t bl1, Double_t tl1, Double_t alpha1, Double_t h2, Double_t bl2, Double_t tl2, Double_t alpha2) | |
Constructor. | |
virtual | ~TGeoGtra () |
Destructor. | |
virtual Double_t | DistFromInside (const Double_t *point, const Double_t *dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const |
Compute distance from inside point to surface of the shape. | |
virtual void | DistFromInside_v (const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize, Double_t *step) const |
Compute distance from array of input points having directions specified by dirs. Store output in dists. | |
virtual Double_t | DistFromOutside (const Double_t *point, const Double_t *dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const |
Compute distance from inside point to surface of the shape. | |
virtual void | DistFromOutside_v (const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize, Double_t *step) const |
Compute distance from array of input points having directions specified by dirs. Store output in dists. | |
virtual TGeoShape * | GetMakeRuntimeShape (TGeoShape *mother, TGeoMatrix *mat) const |
In case shape has some negative parameters, these has to be computed in order to fit the mother. | |
Double_t | GetTwistAngle () const |
virtual TClass * | IsA () const |
virtual Double_t | Safety (const Double_t *point, Bool_t in=kTRUE) const |
Computes the closest distance from given point to this shape. | |
virtual void | Safety_v (const Double_t *points, const Bool_t *inside, Double_t *safe, Int_t vecsize) const |
Compute safe distance from each of the points in the input array. | |
virtual void | SavePrimitive (std::ostream &out, Option_t *option="") |
Save a primitive as a C++ statement(s) on output stream "out". | |
virtual void | SetDimensions (Double_t *param) |
Set all arb8 params in one step. | |
virtual void | Streamer (TBuffer &) |
Stream an object of class TGeoManager. | |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
Public Member Functions inherited from TGeoTrap | |
TGeoTrap () | |
Default ctor. | |
TGeoTrap (const char *name, Double_t dz, Double_t theta, Double_t phi, Double_t h1, Double_t bl1, Double_t tl1, Double_t alpha1, Double_t h2, Double_t bl2, Double_t tl2, Double_t alpha2) | |
Constructor with name. | |
TGeoTrap (Double_t dz, Double_t theta, Double_t phi) | |
Constructor providing just a range in Z, theta and phi. | |
TGeoTrap (Double_t dz, Double_t theta, Double_t phi, Double_t h1, Double_t bl1, Double_t tl1, Double_t alpha1, Double_t h2, Double_t bl2, Double_t tl2, Double_t alpha2) | |
Normal constructor. | |
virtual | ~TGeoTrap () |
Destructor. | |
virtual TGeoVolume * | Divide (TGeoVolume *voldiv, const char *divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step) |
Divide this trapezoid shape belonging to volume "voldiv" into ndiv volumes called divname, from start position with the given step. | |
Double_t | GetAlpha1 () const |
Double_t | GetAlpha2 () const |
Double_t | GetBl1 () const |
Double_t | GetBl2 () const |
Double_t | GetH1 () const |
Double_t | GetH2 () const |
Double_t | GetPhi () const |
Double_t | GetTheta () const |
Double_t | GetTl1 () const |
Double_t | GetTl2 () const |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
Public Member Functions inherited from TGeoArb8 | |
TGeoArb8 () | |
Default constructor. | |
TGeoArb8 (const char *name, Double_t dz, Double_t *vertices=nullptr) | |
Named constructor. | |
TGeoArb8 (Double_t dz, Double_t *vertices=nullptr) | |
Constructor. | |
virtual | ~TGeoArb8 () |
Destructor. | |
virtual Double_t | Capacity () const |
Computes capacity of the shape in [length^3]. | |
virtual void | ComputeBBox () |
Computes bounding box for an Arb8 shape. | |
virtual void | ComputeNormal (const Double_t *point, const Double_t *dir, Double_t *norm) |
Compute normal to closest surface from POINT. | |
virtual void | ComputeNormal_v (const Double_t *points, const Double_t *dirs, Double_t *norms, Int_t vecsize) |
Compute the normal for an array o points so that norm.dot.dir is positive Input: Arrays of point coordinates and directions + vector size Output: Array of normal directions. | |
void | ComputeTwist () |
Computes tangents of twist angles (angles between projections on XY plane of corresponding -dz +dz edges). | |
virtual Bool_t | Contains (const Double_t *point) const |
Test if point is inside this shape. | |
virtual void | Contains_v (const Double_t *points, Bool_t *inside, Int_t vecsize) const |
Check the inside status for each of the points in the array. | |
Double_t | DistToPlane (const Double_t *point, const Double_t *dir, Int_t ipl, Bool_t in) const |
Computes distance to plane ipl : | |
virtual Double_t | GetAxisRange (Int_t iaxis, Double_t &xlo, Double_t &xhi) const |
Get shape range on a given axis. | |
virtual void | GetBoundingCylinder (Double_t *param) const |
Fill vector param[4] with the bounding cylinder parameters. | |
virtual Int_t | GetByteCount () const |
Double_t | GetClosestEdge (const Double_t *point, Double_t *vert, Int_t &isegment) const |
Get index of the edge of the quadrilater represented by vert closest to point. | |
Double_t | GetDz () const |
virtual Int_t | GetFittingBox (const TGeoBBox *parambox, TGeoMatrix *mat, Double_t &dx, Double_t &dy, Double_t &dz) const |
Fills real parameters of a positioned box inside this arb8. Returns 0 if successful. | |
virtual Bool_t | GetPointsOnFacet (Int_t, Int_t, Double_t *) const |
Fills array with n random points located on the surface of indexed facet. | |
Double_t | GetTwist (Int_t iseg) const |
Get twist for segment I in range [0,3]. | |
Double_t * | GetVertices () |
virtual void | InspectShape () const |
Prints shape parameters. | |
virtual Bool_t | IsCylType () const |
Bool_t | IsTwisted () const |
Double_t | SafetyToFace (const Double_t *point, Int_t iseg, Bool_t in) const |
Estimate safety to lateral plane defined by segment iseg in range [0,3] Might be negative: plane seen only from inside. | |
void | SetDz (Double_t dz) |
void | SetPlaneVertices (Double_t zpl, Double_t *vertices) const |
Computes intersection points between plane at zpl and non-horizontal edges. | |
virtual void | SetPoints (Double_t *points) const |
Creates arb8 mesh points. | |
virtual void | SetPoints (Float_t *points) const |
Creates arb8 mesh points. | |
virtual void | SetVertex (Int_t vnum, Double_t x, Double_t y) |
Set values for a given vertex. | |
virtual void | Sizeof3D () const |
Fill size of this 3-D object. | |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
Public Member Functions inherited from TGeoBBox | |
TGeoBBox () | |
Default constructor. | |
TGeoBBox (const char *name, Double_t dx, Double_t dy, Double_t dz, Double_t *origin=nullptr) | |
Constructor with shape name. | |
TGeoBBox (Double_t *param) | |
Constructor based on the array of parameters. | |
TGeoBBox (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=nullptr) | |
Constructor where half-lengths are provided. | |
virtual | ~TGeoBBox () |
Destructor. | |
virtual Bool_t | CouldBeCrossed (const Double_t *point, const Double_t *dir) const |
Decides fast if the bounding box could be crossed by a vector. | |
virtual Int_t | DistancetoPrimitive (Int_t px, Int_t py) |
Compute closest distance from point px,py to each corner. | |
virtual const char * | GetAxisName (Int_t iaxis) const |
Returns name of axis IAXIS. | |
virtual const TBuffer3D & | GetBuffer3D (Int_t reqSections, Bool_t localFrame) const |
Fills a static 3D buffer and returns a reference. | |
virtual Double_t | GetDX () const |
virtual Double_t | GetDY () const |
virtual Double_t | GetDZ () const |
virtual Double_t | GetFacetArea (Int_t index=0) const |
Get area in internal units of the facet with a given index. | |
virtual void | GetMeshNumbers (Int_t &nvert, Int_t &nsegs, Int_t &npols) const |
Returns numbers of vertices, segments and polygons composing the shape mesh. | |
virtual Int_t | GetNmeshVertices () const |
virtual const Double_t * | GetOrigin () const |
virtual Bool_t | GetPointsOnSegments (Int_t npoints, Double_t *array) const |
Fills array with n random points located on the line segments of the shape mesh. | |
virtual Bool_t | IsNullBox () const |
virtual Bool_t | IsValidBox () const |
virtual TBuffer3D * | MakeBuffer3D () const |
Creates a TBuffer3D describing this shape. | |
void | SetBoxDimensions (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=nullptr) |
Set parameters of the box. | |
void | SetBoxPoints (Double_t *points) const |
Fill box vertices to an array. | |
virtual void | SetSegsAndPols (TBuffer3D &buffer) const |
Fills TBuffer3D structure for segments and polygons. | |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
Public Member Functions inherited from TGeoShape | |
TGeoShape () | |
Default constructor. | |
TGeoShape (const char *name) | |
Default constructor. | |
virtual | ~TGeoShape () |
Destructor. | |
virtual void | AfterStreamer () |
void | CheckShape (Int_t testNo, Int_t nsamples=10000, Option_t *option="") |
Test for shape navigation methods. | |
virtual void | ClearThreadData () const |
virtual void | CreateThreadData (Int_t) |
virtual void | Draw (Option_t *option="") |
Draw this shape. | |
virtual void | ExecuteEvent (Int_t event, Int_t px, Int_t py) |
Execute mouse actions on this shape. | |
Int_t | GetId () const |
virtual const char * | GetName () const |
Get the shape name. | |
const char * | GetPointerName () const |
Provide a pointer name containing uid. | |
void | InvertShapeBit (UInt_t f) |
virtual Bool_t | IsAssembly () const |
virtual Bool_t | IsComposite () const |
virtual Bool_t | IsReflected () const |
Bool_t | IsRunTimeShape () const |
Bool_t | IsValid () const |
virtual Bool_t | IsVecGeom () const |
virtual void | Paint (Option_t *option="") |
Paint this shape. | |
void | ResetShapeBit (UInt_t f) |
void | SetId (Int_t id) |
void | SetRuntime (Bool_t flag=kTRUE) |
void | SetShapeBit (UInt_t f) |
void | SetShapeBit (UInt_t f, Bool_t set) |
Equivalent of TObject::SetBit. | |
Int_t | ShapeDistancetoPrimitive (Int_t numpoints, Int_t px, Int_t py) const |
Returns distance to shape primitive mesh. | |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
Bool_t | TestShapeBit (UInt_t f) const |
Int_t | TestShapeBits (UInt_t f) const |
Public Member Functions inherited from TNamed | |
TNamed () | |
TNamed (const char *name, const char *title) | |
TNamed (const TNamed &named) | |
TNamed copy ctor. | |
TNamed (const TString &name, const TString &title) | |
virtual | ~TNamed () |
TNamed destructor. | |
void | Clear (Option_t *option="") override |
Set name and title to empty strings (""). | |
TObject * | Clone (const char *newname="") const override |
Make a clone of an object using the Streamer facility. | |
Int_t | Compare (const TObject *obj) const override |
Compare two TNamed objects. | |
void | Copy (TObject &named) const override |
Copy this to obj. | |
virtual void | FillBuffer (char *&buffer) |
Encode TNamed into output buffer. | |
const char * | GetName () const override |
Returns name of object. | |
const char * | GetTitle () const override |
Returns title of object. | |
ULong_t | Hash () const override |
Return hash value for this object. | |
TClass * | IsA () const override |
Bool_t | IsSortable () const override |
void | ls (Option_t *option="") const override |
List TNamed name and title. | |
TNamed & | operator= (const TNamed &rhs) |
TNamed assignment operator. | |
void | Print (Option_t *option="") const override |
Print TNamed name and title. | |
virtual void | SetName (const char *name) |
Set the name of the TNamed. | |
virtual void | SetNameTitle (const char *name, const char *title) |
Set all the TNamed parameters (name and title). | |
virtual void | SetTitle (const char *title="") |
Set the title of the TNamed. | |
virtual Int_t | Sizeof () const |
Return size of the TNamed part of the TObject. | |
void | Streamer (TBuffer &) override |
Stream an object of class TObject. | |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
Public Member Functions inherited from TObject | |
TObject () | |
TObject constructor. | |
TObject (const TObject &object) | |
TObject copy ctor. | |
virtual | ~TObject () |
TObject destructor. | |
void | AbstractMethod (const char *method) const |
Use this method to implement an "abstract" method that you don't want to leave purely abstract. | |
virtual void | AppendPad (Option_t *option="") |
Append graphics object to current pad. | |
virtual void | Browse (TBrowser *b) |
Browse object. May be overridden for another default action. | |
ULong_t | CheckedHash () |
Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object. | |
virtual const char * | ClassName () const |
Returns name of class to which the object belongs. | |
virtual void | Delete (Option_t *option="") |
Delete this object. | |
virtual void | DrawClass () const |
Draw class inheritance tree of the class to which this object belongs. | |
virtual TObject * | DrawClone (Option_t *option="") const |
Draw a clone of this object in the current selected pad with: gROOT->SetSelectedPad(c1) . | |
virtual void | Dump () const |
Dump contents of object on stdout. | |
virtual void | Error (const char *method, const char *msgfmt,...) const |
Issue error message. | |
virtual void | Execute (const char *method, const char *params, Int_t *error=nullptr) |
Execute method on this object with the given parameter string, e.g. | |
virtual void | Execute (TMethod *method, TObjArray *params, Int_t *error=nullptr) |
Execute method on this object with parameters stored in the TObjArray. | |
virtual void | Fatal (const char *method, const char *msgfmt,...) const |
Issue fatal error message. | |
virtual TObject * | FindObject (const char *name) const |
Must be redefined in derived classes. | |
virtual TObject * | FindObject (const TObject *obj) const |
Must be redefined in derived classes. | |
virtual Option_t * | GetDrawOption () const |
Get option used by the graphics system to draw this object. | |
virtual const char * | GetIconName () const |
Returns mime type name of object. | |
virtual char * | GetObjectInfo (Int_t px, Int_t py) const |
Returns string containing info about the object at position (px,py). | |
virtual Option_t * | GetOption () const |
virtual UInt_t | GetUniqueID () const |
Return the unique object id. | |
virtual Bool_t | HandleTimer (TTimer *timer) |
Execute action in response of a timer timing out. | |
Bool_t | HasInconsistentHash () const |
Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e. | |
virtual void | Info (const char *method, const char *msgfmt,...) const |
Issue info message. | |
virtual Bool_t | InheritsFrom (const char *classname) const |
Returns kTRUE if object inherits from class "classname". | |
virtual Bool_t | InheritsFrom (const TClass *cl) const |
Returns kTRUE if object inherits from TClass cl. | |
virtual void | Inspect () const |
Dump contents of this object in a graphics canvas. | |
void | InvertBit (UInt_t f) |
Bool_t | IsDestructed () const |
IsDestructed. | |
virtual Bool_t | IsEqual (const TObject *obj) const |
Default equal comparison (objects are equal if they have the same address in memory). | |
virtual Bool_t | IsFolder () const |
Returns kTRUE in case object contains browsable objects (like containers or lists of other objects). | |
R__ALWAYS_INLINE Bool_t | IsOnHeap () const |
R__ALWAYS_INLINE Bool_t | IsZombie () const |
void | MayNotUse (const char *method) const |
Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary). | |
virtual Bool_t | Notify () |
This method must be overridden to handle object notification. | |
void | Obsolete (const char *method, const char *asOfVers, const char *removedFromVers) const |
Use this method to declare a method obsolete. | |
void | operator delete (void *ptr) |
Operator delete. | |
void | operator delete[] (void *ptr) |
Operator delete []. | |
void * | operator new (size_t sz) |
void * | operator new (size_t sz, void *vp) |
void * | operator new[] (size_t sz) |
void * | operator new[] (size_t sz, void *vp) |
TObject & | operator= (const TObject &rhs) |
TObject assignment operator. | |
virtual void | Pop () |
Pop on object drawn in a pad to the top of the display list. | |
virtual Int_t | Read (const char *name) |
Read contents of object with specified name from the current directory. | |
virtual void | RecursiveRemove (TObject *obj) |
Recursively remove this object from a list. | |
void | ResetBit (UInt_t f) |
virtual void | SaveAs (const char *filename="", Option_t *option="") const |
Save this object in the file specified by filename. | |
void | SetBit (UInt_t f) |
void | SetBit (UInt_t f, Bool_t set) |
Set or unset the user status bits as specified in f. | |
virtual void | SetDrawOption (Option_t *option="") |
Set drawing option for object. | |
virtual void | SetUniqueID (UInt_t uid) |
Set the unique object id. | |
void | StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b) |
virtual void | SysError (const char *method, const char *msgfmt,...) const |
Issue system error message. | |
R__ALWAYS_INLINE Bool_t | TestBit (UInt_t f) const |
Int_t | TestBits (UInt_t f) const |
virtual void | UseCurrentStyle () |
Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked. | |
virtual void | Warning (const char *method, const char *msgfmt,...) const |
Issue warning message. | |
virtual Int_t | Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) |
Write this object to the current directory. | |
virtual Int_t | Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) const |
Write this object to the current directory. | |
Static Public Member Functions | |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static const char * | DeclFileName () |
Static Public Member Functions inherited from TGeoTrap | |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static const char * | DeclFileName () |
Static Public Member Functions inherited from TGeoArb8 | |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static const char * | DeclFileName () |
static void | GetPlaneNormal (Double_t *p1, Double_t *p2, Double_t *p3, Double_t *norm) |
Computes normal to plane defined by P1, P2 and P3. | |
static Bool_t | InsidePolygon (Double_t x, Double_t y, Double_t *pts) |
Finds if a point in XY plane is inside the polygon defines by PTS. | |
static Bool_t | IsSamePoint (const Double_t *p1, const Double_t *p2) |
Static Public Member Functions inherited from TGeoBBox | |
static Bool_t | AreOverlapping (const TGeoBBox *box1, const TGeoMatrix *mat1, const TGeoBBox *box2, const TGeoMatrix *mat2) |
Check if 2 positioned boxes overlap. | |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static Bool_t | Contains (const Double_t *point, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin) |
Static method to check if point[3] is located inside a box of having dx, dy, dz as half-lengths. | |
static const char * | DeclFileName () |
static Double_t | DistFromInside (const Double_t *point, const Double_t *dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big()) |
Compute distance from inside point to surface of the box. | |
static Double_t | DistFromOutside (const Double_t *point, const Double_t *dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big()) |
Compute distance from outside point to surface of the box. | |
Static Public Member Functions inherited from TGeoShape | |
static Double_t | Big () |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static Double_t | ComputeEpsMch () |
Compute machine round-off double precision error as the smallest number that if added to 1.0 is different than 1.0. | |
static const char * | DeclFileName () |
static Double_t | DistToPhiMin (const Double_t *point, const Double_t *dir, Double_t s1, Double_t c1, Double_t s2, Double_t c2, Double_t sm, Double_t cm, Bool_t in=kTRUE) |
compute distance from point (inside phi) to both phi planes. Return minimum. | |
static Double_t | EpsMch () |
static function returning the machine round-off error | |
static TGeoMatrix * | GetTransform () |
Returns current transformation matrix that applies to shape. | |
static Bool_t | IsCloseToPhi (Double_t epsil, const Double_t *point, Double_t c1, Double_t s1, Double_t c2, Double_t s2) |
True if point is closer than epsil to one of the phi planes defined by c1,s1 or c2,s2. | |
static Bool_t | IsCrossingSemiplane (const Double_t *point, const Double_t *dir, Double_t cphi, Double_t sphi, Double_t &snext, Double_t &rxy) |
Compute distance from POINT to semiplane defined by PHI angle along DIR. | |
static Bool_t | IsInPhiRange (const Double_t *point, Double_t phi1, Double_t phi2) |
Static method to check if a point is in the phi range (phi1, phi2) [degrees]. | |
static Bool_t | IsSameWithinTolerance (Double_t a, Double_t b) |
Check if two numbers differ with less than a tolerance. | |
static Bool_t | IsSegCrossing (Double_t x1, Double_t y1, Double_t x2, Double_t y2, Double_t x3, Double_t y3, Double_t x4, Double_t y4) |
Check if segments (A,B) and (C,D) are crossing, where: A(x1,y1), B(x2,y2), C(x3,y3), D(x4,y4) | |
static void | NormalPhi (const Double_t *point, const Double_t *dir, Double_t *norm, Double_t c1, Double_t s1, Double_t c2, Double_t s2) |
Static method to compute normal to phi planes. | |
static Double_t | SafetyPhi (const Double_t *point, Bool_t in, Double_t phi1, Double_t phi2) |
Static method to compute safety w.r.t a phi corner defined by cosines/sines of the angles phi1, phi2. | |
static Double_t | SafetySeg (Double_t r, Double_t z, Double_t r1, Double_t z1, Double_t r2, Double_t z2, Bool_t outer) |
Compute distance from point of coordinates (r,z) to segment (r1,z1):(r2,z2) | |
static void | SetTransform (TGeoMatrix *matrix) |
Set current transformation matrix that applies to shape. | |
static Double_t | Tolerance () |
Static Public Member Functions inherited from TNamed | |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static const char * | DeclFileName () |
Static Public Member Functions inherited from TObject | |
static TClass * | Class () |
static const char * | Class_Name () |
static constexpr Version_t | Class_Version () |
static const char * | DeclFileName () |
static Longptr_t | GetDtorOnly () |
Return destructor only flag. | |
static Bool_t | GetObjectStat () |
Get status of object stat flag. | |
static void | SetDtorOnly (void *obj) |
Set destructor only flag. | |
static void | SetObjectStat (Bool_t stat) |
Turn on/off tracking of objects in the TObjectTable. | |
Protected Attributes | |
Double_t | fTwistAngle |
Protected Attributes inherited from TGeoTrap | |
Double_t | fAlpha1 |
Double_t | fAlpha2 |
Double_t | fBl1 |
Double_t | fBl2 |
Double_t | fH1 |
Double_t | fH2 |
Double_t | fPhi |
Double_t | fTheta |
Double_t | fTl1 |
Double_t | fTl2 |
Protected Attributes inherited from TGeoArb8 | |
Double_t | fDz {0} |
Double_t * | fTwist {nullptr} |
Double_t | fXY [8][2] |
[4] tangents of twist angles | |
Protected Attributes inherited from TGeoBBox | |
Double_t | fDX |
Double_t | fDY |
Double_t | fDZ |
Double_t | fOrigin [3] |
Protected Attributes inherited from TGeoShape | |
UInt_t | fShapeBits |
Int_t | fShapeId |
Protected Attributes inherited from TNamed | |
TString | fName |
TString | fTitle |
Additional Inherited Members | |
Public Types inherited from TGeoShape | |
enum | EShapeType { kBitMask32 = 0xffffffff , kGeoNoShape = 0 , kGeoBad = (1ULL << ( 0 )) , kGeoRSeg = (1ULL << ( 1 )) , kGeoPhiSeg = (1ULL << ( 2 )) , kGeoThetaSeg = (1ULL << ( 3 )) , kGeoVisX = (1ULL << ( 4 )) , kGeoVisY = (1ULL << ( 5 )) , kGeoVisZ = (1ULL << ( 6 )) , kGeoRunTimeShape = (1ULL << ( 7 )) , kGeoInvalidShape = (1ULL << ( 8 )) , kGeoTorus = (1ULL << ( 9 )) , kGeoBox = (1ULL << ( 10 )) , kGeoPara = (1ULL << ( 11 )) , kGeoSph = (1ULL << ( 12 )) , kGeoTube = (1ULL << ( 13 )) , kGeoTubeSeg = (1ULL << ( 14 )) , kGeoCone = (1ULL << ( 15 )) , kGeoConeSeg = (1ULL << ( 16 )) , kGeoPcon = (1ULL << ( 17 )) , kGeoPgon = (1ULL << ( 18 )) , kGeoArb8 = (1ULL << ( 19 )) , kGeoEltu = (1ULL << ( 20 )) , kGeoTrap = (1ULL << ( 21 )) , kGeoCtub = (1ULL << ( 22 )) , kGeoTrd1 = (1ULL << ( 23 )) , kGeoTrd2 = (1ULL << ( 24 )) , kGeoComb = (1ULL << ( 25 )) , kGeoClosedShape = (1ULL << ( 26 )) , kGeoXtru = (1ULL << ( 27 )) , kGeoParaboloid = (1ULL << ( 28 )) , kGeoHalfSpace = (1ULL << ( 29 )) , kGeoHype = (1ULL << ( 30 )) , kGeoSavePrimitive = (1ULL << ( 20 )) } |
Public Types inherited from TObject | |
enum | { kIsOnHeap = 0x01000000 , kNotDeleted = 0x02000000 , kZombie = 0x04000000 , kInconsistent = 0x08000000 , kBitMask = 0x00ffffff } |
enum | { kSingleKey = (1ULL << ( 0 )) , kOverwrite = (1ULL << ( 1 )) , kWriteDelete = (1ULL << ( 2 )) } |
enum | EDeprecatedStatusBits { kObjInCanvas = (1ULL << ( 3 )) } |
enum | EStatusBits { kCanDelete = (1ULL << ( 0 )) , kMustCleanup = (1ULL << ( 3 )) , kIsReferenced = (1ULL << ( 4 )) , kHasUUID = (1ULL << ( 5 )) , kCannotPick = (1ULL << ( 6 )) , kNoContextMenu = (1ULL << ( 8 )) , kInvalidObject = (1ULL << ( 13 )) } |
Protected Types inherited from TGeoArb8 | |
enum | EGeoArb8Type { kArb8Trap = (1ULL << ( 27 )) , kArb8Tra = (1ULL << ( 28 )) } |
Protected Types inherited from TObject | |
enum | { kOnlyPrepStep = (1ULL << ( 3 )) } |
Protected Member Functions inherited from TGeoArb8 | |
TGeoArb8 (const TGeoArb8 &)=delete | |
void | CopyTwist (Double_t *twist=nullptr) |
Copy twist values from source array. | |
TGeoArb8 & | operator= (const TGeoArb8 &)=delete |
Protected Member Functions inherited from TGeoBBox | |
TGeoBBox (const TGeoBBox &)=delete | |
virtual void | FillBuffer3D (TBuffer3D &buffer, Int_t reqSections, Bool_t localFrame) const |
Fills the supplied buffer, with sections in desired frame See TBuffer3D.h for explanation of sections, frame etc. | |
TGeoBBox & | operator= (const TGeoBBox &)=delete |
Protected Member Functions inherited from TGeoShape | |
Int_t | GetBasicColor () const |
Get the basic color (0-7). | |
void | SetOnBoundary (Bool_t) |
void | TransformPoints (Double_t *points, UInt_t NbPoints) const |
Tranform a set of points (LocalToMaster) | |
Protected Member Functions inherited from TObject | |
virtual void | DoError (int level, const char *location, const char *fmt, va_list va) const |
Interface to ErrorHandler (protected). | |
void | MakeZombie () |
#include <TGeoArb8.h>
TGeoGtra::TGeoGtra | ( | ) |
Default ctor.
Definition at line 1851 of file TGeoArb8.cxx.
TGeoGtra::TGeoGtra | ( | Double_t | dz, |
Double_t | theta, | ||
Double_t | phi, | ||
Double_t | twist, | ||
Double_t | h1, | ||
Double_t | bl1, | ||
Double_t | tl1, | ||
Double_t | alpha1, | ||
Double_t | h2, | ||
Double_t | bl2, | ||
Double_t | tl2, | ||
Double_t | alpha2 | ||
) |
Constructor.
Definition at line 1860 of file TGeoArb8.cxx.
TGeoGtra::TGeoGtra | ( | const char * | name, |
Double_t | dz, | ||
Double_t | theta, | ||
Double_t | phi, | ||
Double_t | twist, | ||
Double_t | h1, | ||
Double_t | bl1, | ||
Double_t | tl1, | ||
Double_t | alpha1, | ||
Double_t | h2, | ||
Double_t | bl2, | ||
Double_t | tl2, | ||
Double_t | alpha2 | ||
) |
Constructor providing the name of the shape.
Definition at line 1899 of file TGeoArb8.cxx.
|
virtual |
Destructor.
Definition at line 1938 of file TGeoArb8.cxx.
|
static |
|
inlinestaticconstexpr |
Definition at line 174 of file TGeoArb8.h.
|
inlinestatic |
Definition at line 174 of file TGeoArb8.h.
|
virtual |
Compute distance from inside point to surface of the shape.
Reimplemented from TGeoTrap.
Definition at line 1945 of file TGeoArb8.cxx.
|
virtual |
Compute distance from array of input points having directions specified by dirs. Store output in dists.
Reimplemented from TGeoTrap.
Definition at line 2097 of file TGeoArb8.cxx.
|
virtual |
Compute distance from inside point to surface of the shape.
Reimplemented from TGeoTrap.
Definition at line 1960 of file TGeoArb8.cxx.
|
virtual |
Compute distance from array of input points having directions specified by dirs. Store output in dists.
Reimplemented from TGeoTrap.
Definition at line 2105 of file TGeoArb8.cxx.
|
virtual |
In case shape has some negative parameters, these has to be computed in order to fit the mother.
Reimplemented from TGeoTrap.
Definition at line 1976 of file TGeoArb8.cxx.
|
inline |
Definition at line 168 of file TGeoArb8.h.
|
inlinevirtual |
Reimplemented from TGeoTrap.
Definition at line 174 of file TGeoArb8.h.
Computes the closest distance from given point to this shape.
Reimplemented from TGeoTrap.
Definition at line 2016 of file TGeoArb8.cxx.
|
virtual |
Compute safe distance from each of the points in the input array.
Input: Array of point coordinates, array of statuses for these points, size of the arrays Output: Safety values
Reimplemented from TGeoTrap.
Definition at line 2115 of file TGeoArb8.cxx.
|
virtual |
Save a primitive as a C++ statement(s) on output stream "out".
Reimplemented from TGeoTrap.
Definition at line 2024 of file TGeoArb8.cxx.
|
virtual |
Set all arb8 params in one step.
Reimplemented from TGeoTrap.
Definition at line 2059 of file TGeoArb8.cxx.
|
virtual |
Stream an object of class TGeoManager.
Reimplemented from TGeoTrap.
|
inline |
Definition at line 174 of file TGeoArb8.h.
|
protected |
Definition at line 149 of file TGeoArb8.h.