A hyperboloid is represented as a solid limited by two planes perpendicular to the Z axis (top and bottom planes) and two hyperbolic surfaces of revolution about Z axis (inner and outer surfaces).

The class describing hyperboloids is TGeoHype has 5 input parameters:

TGeoHype(Double_t rin,Double_t stin,Double_t rout,

Double_t stout,Double_t dz);

TGeoHype::TGeoHype

TGeoHype()

Default constructor.

Definition TGeoHype.cxx:92

double

The hyperbolic surface equation is taken in the form:

r2 - z2tan2() = r2min

r,z: cylindrical coordinates for a point on the surface
: stereo angle between the hyperbola asymptotic lines and Z axis
r2min: minimum distance between hyperbola and Z axis (at z=0)

The input parameters represent:

rin, stin: minimum radius and tangent of stereo angle for inner surface
rout, stout: minimum radius and tangent of stereo angle for outer surface
dz: half length in Z (bounding planes positions at +/-dz)

The following conditions are mandatory in order to avoid intersections between the inner and outer hyperbolic surfaces in the range +/-dz:

rin<rout
rout>0
rin2 + dz2*stin2 > rout2 + dz2*stout2

Particular cases:

rin=0, stin0: the inner surface is conical
stin=0 / stout=0: cylindrical surface(s)

Definition at line 17 of file TGeoHype.h.

Public Member Functions
	TGeoHype ()
	Default constructor.

	TGeoHype (const char *name, Double_t rin, Double_t stin, Double_t rout, Double_t stout, Double_t dz)
	Constructor specifying parameters and name.

	TGeoHype (Double_t *params)
	Default constructor specifying a list of parameters.

	TGeoHype (Double_t rin, Double_t stin, Double_t rout, Double_t stout, Double_t dz)
	Constructor specifying hyperboloid parameters.

virtual	~TGeoHype ()
	destructor

virtual Double_t	Capacity () const
	Computes capacity of the shape in [length^3].

virtual void	ComputeBBox ()
	Compute bounding box of the hyperboloid.

virtual void	ComputeNormal (const Double_t point, const Double_t dir, Double_t *norm)
	Compute normal to closest surface from POINT.

virtual void	ComputeNormal_v (const Double_t points, const Double_t dirs, Double_t *norms, Int_t vecsize)
	Compute the normal for an array o points so that norm.dot.dir is positive Input: Arrays of point coordinates and directions + vector size Output: Array of normal directions.

virtual Bool_t	Contains (const Double_t *point) const
	test if point is inside this tube

virtual void	Contains_v (const Double_t points, Bool_t inside, Int_t vecsize) const
	Check the inside status for each of the points in the array.

virtual Int_t	DistancetoPrimitive (Int_t px, Int_t py)
	compute closest distance from point px,py to each corner

virtual Double_t	DistFromInside (const Double_t point, const Double_t dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const
	Compute distance from inside point to surface of the hyperboloid.

virtual void	DistFromInside_v (const Double_t points, const Double_t dirs, Double_t dists, Int_t vecsize, Double_t step) const
	Compute distance from array of input points having directions specified by dirs. Store output in dists.

virtual Double_t	DistFromOutside (const Double_t point, const Double_t dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const
	compute distance from outside point to surface of the hyperboloid.

virtual void	DistFromOutside_v (const Double_t points, const Double_t dirs, Double_t dists, Int_t vecsize, Double_t step) const
	Compute distance from array of input points having directions specified by dirs. Store output in dists.

Int_t	DistToHype (const Double_t point, const Double_t dir, Double_t *s, Bool_t inner, Bool_t in) const
	Compute distance from an arbitrary point to inner/outer surface of hyperboloid.

virtual TGeoVolume *	Divide (TGeoVolume voldiv, const char divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step)
	Cannot divide hyperboloids.

virtual Double_t	GetAxisRange (Int_t iaxis, Double_t &xlo, Double_t &xhi) const
	Get range of shape for a given axis.

virtual void	GetBoundingCylinder (Double_t *param) const
	Fill vector param[4] with the bounding cylinder parameters.

virtual const TBuffer3D &	GetBuffer3D (Int_t reqSections, Bool_t localFrame) const
	Fills a static 3D buffer and returns a reference.

virtual Int_t	GetByteCount () const

virtual TGeoShape *	GetMakeRuntimeShape (TGeoShape mother, TGeoMatrix mat) const
	in case shape has some negative parameters, these has to be computed in order to fit the mother

virtual void	GetMeshNumbers (Int_t &nvert, Int_t &nsegs, Int_t &npols) const
	Returns numbers of vertices, segments and polygons composing the shape mesh.

virtual Int_t	GetNmeshVertices () const
	Return number of vertices of the mesh representation.

virtual Bool_t	GetPointsOnSegments (Int_t, Double_t *) const
	Fills array with n random points located on the line segments of the shape mesh.

Double_t	GetStIn () const

Double_t	GetStOut () const

Bool_t	HasInner () const

virtual void	InspectShape () const
	print shape parameters

virtual TClass *	IsA () const

virtual Bool_t	IsCylType () const

virtual TBuffer3D *	MakeBuffer3D () const
	Creates a TBuffer3D describing this shape.

Double_t	RadiusHypeSq (Double_t z, Bool_t inner) const
	Compute r^2 = x^2 + y^2 at a given z coordinate, for either inner or outer hyperbolas.

virtual Double_t	Safety (const Double_t *point, Bool_t in=kTRUE) const
	computes the closest distance from given point to this shape, according to option.

virtual void	Safety_v (const Double_t points, const Bool_t inside, Double_t *safe, Int_t vecsize) const
	Compute safe distance from each of the points in the input array.

Double_t	SafetyToHype (const Double_t *point, Bool_t inner, Bool_t in) const
	Compute an underestimate of the closest distance from a point to inner or outer infinite hyperbolas.

virtual void	SavePrimitive (std::ostream &out, Option_t *option="")
	Save a primitive as a C++ statement(s) on output stream "out".

virtual void	SetDimensions (Double_t *param)
	Set dimensions of the hyperboloid starting from an array.

void	SetHypeDimensions (Double_t rin, Double_t stin, Double_t rout, Double_t stout, Double_t dz)
	Set dimensions of the hyperboloid.

virtual void	SetPoints (Double_t *points) const
	create tube mesh points

virtual void	SetPoints (Float_t *points) const
	create tube mesh points

virtual void	SetSegsAndPols (TBuffer3D &buff) const
	Fill TBuffer3D structure for segments and polygons.

virtual void	Sizeof3D () const
	fill size of this 3-D object

virtual void	Streamer (TBuffer &)
	Stream an object of class TObject.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Double_t	ZHypeSq (Double_t r, Bool_t inner) const
	Compute z^2 at a given r^2, for either inner or outer hyperbolas.

Public Member Functions inherited from TGeoTube
	TGeoTube ()
	Default constructor.

	TGeoTube (const char *name, Double_t rmin, Double_t rmax, Double_t dz)
	Default constructor specifying minimum and maximum radius.

	TGeoTube (Double_t *params)
	Default constructor specifying minimum and maximum radius.

	TGeoTube (Double_t rmin, Double_t rmax, Double_t dz)
	Default constructor specifying minimum and maximum radius.

virtual	~TGeoTube ()
	destructor

virtual const char *	GetAxisName (Int_t iaxis) const
	Returns name of axis IAXIS.

virtual Double_t	GetDz () const

virtual Double_t	GetRmax () const

virtual Double_t	GetRmin () const

Bool_t	HasRmin () const

void	SetTubeDimensions (Double_t rmin, Double_t rmax, Double_t dz)
	Set tube dimensions.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TGeoBBox
	TGeoBBox ()
	Default constructor.

	TGeoBBox (const char name, Double_t dx, Double_t dy, Double_t dz, Double_t origin=nullptr)
	Constructor with shape name.

	TGeoBBox (Double_t *param)
	Constructor based on the array of parameters.

	TGeoBBox (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=nullptr)
	Constructor where half-lengths are provided.

virtual	~TGeoBBox ()
	Destructor.

virtual Bool_t	CouldBeCrossed (const Double_t point, const Double_t dir) const
	Decides fast if the bounding box could be crossed by a vector.

virtual Double_t	GetDX () const

virtual Double_t	GetDY () const

virtual Double_t	GetDZ () const

virtual Double_t	GetFacetArea (Int_t index=0) const
	Get area in internal units of the facet with a given index.

virtual Int_t	GetFittingBox (const TGeoBBox parambox, TGeoMatrix mat, Double_t &dx, Double_t &dy, Double_t &dz) const
	Fills real parameters of a positioned box inside this one. Returns 0 if successful.

virtual const Double_t *	GetOrigin () const

virtual Bool_t	GetPointsOnFacet (Int_t index, Int_t npoints, Double_t *array) const
	Fills array with n random points located on the surface of indexed facet.

virtual Bool_t	IsNullBox () const

virtual Bool_t	IsValidBox () const

void	SetBoxDimensions (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=nullptr)
	Set parameters of the box.

void	SetBoxPoints (Double_t *points) const
	Fill box vertices to an array.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TGeoShape
	TGeoShape ()
	Default constructor.

	TGeoShape (const char *name)
	Default constructor.

virtual	~TGeoShape ()
	Destructor.

virtual void	AfterStreamer ()

void	CheckShape (Int_t testNo, Int_t nsamples=10000, Option_t *option="")
	Test for shape navigation methods.

virtual void	ClearThreadData () const

virtual void	CreateThreadData (Int_t)

virtual void	Draw (Option_t *option="")
	Draw this shape.

virtual void	ExecuteEvent (Int_t event, Int_t px, Int_t py)
	Execute mouse actions on this shape.

Int_t	GetId () const

virtual const char *	GetName () const
	Get the shape name.

const char *	GetPointerName () const
	Provide a pointer name containing uid.

void	InvertShapeBit (UInt_t f)

virtual Bool_t	IsAssembly () const

virtual Bool_t	IsComposite () const

virtual Bool_t	IsReflected () const

Bool_t	IsRunTimeShape () const

Bool_t	IsValid () const

virtual Bool_t	IsVecGeom () const

virtual void	Paint (Option_t *option="")
	Paint this shape.

void	ResetShapeBit (UInt_t f)

void	SetId (Int_t id)

void	SetRuntime (Bool_t flag=kTRUE)

void	SetShapeBit (UInt_t f)

void	SetShapeBit (UInt_t f, Bool_t set)
	Equivalent of TObject::SetBit.

Int_t	ShapeDistancetoPrimitive (Int_t numpoints, Int_t px, Int_t py) const
	Returns distance to shape primitive mesh.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Bool_t	TestShapeBit (UInt_t f) const

Int_t	TestShapeBits (UInt_t f) const

Public Member Functions inherited from TNamed
	TNamed ()

	TNamed (const char name, const char title)

	TNamed (const TNamed &named)
	TNamed copy ctor.

	TNamed (const TString &name, const TString &title)

virtual	~TNamed ()
	TNamed destructor.

void	Clear (Option_t *option="") override
	Set name and title to empty strings ("").

TObject *	Clone (const char *newname="") const override
	Make a clone of an object using the Streamer facility.

Int_t	Compare (const TObject *obj) const override
	Compare two TNamed objects.

void	Copy (TObject &named) const override
	Copy this to obj.

virtual void	FillBuffer (char *&buffer)
	Encode TNamed into output buffer.

const char *	GetName () const override
	Returns name of object.

const char *	GetTitle () const override
	Returns title of object.

ULong_t	Hash () const override
	Return hash value for this object.

TClass *	IsA () const override

Bool_t	IsSortable () const override

void	ls (Option_t *option="") const override
	List TNamed name and title.

TNamed &	operator= (const TNamed &rhs)
	TNamed assignment operator.

void	Print (Option_t *option="") const override
	Print TNamed name and title.

virtual void	SetName (const char *name)
	Set the name of the TNamed.

virtual void	SetNameTitle (const char name, const char title)
	Set all the TNamed parameters (name and title).

virtual void	SetTitle (const char *title="")
	Set the title of the TNamed.

virtual Int_t	Sizeof () const
	Return size of the TNamed part of the TObject.

void	Streamer (TBuffer &) override
	Stream an object of class TObject.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TObject
	TObject ()
	TObject constructor.

	TObject (const TObject &object)
	TObject copy ctor.

virtual	~TObject ()
	TObject destructor.

void	AbstractMethod (const char *method) const
	Use this method to implement an "abstract" method that you don't want to leave purely abstract.

virtual void	AppendPad (Option_t *option="")
	Append graphics object to current pad.

virtual void	Browse (TBrowser *b)
	Browse object. May be overridden for another default action.

ULong_t	CheckedHash ()
	Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object.

virtual const char *	ClassName () const
	Returns name of class to which the object belongs.

virtual void	Delete (Option_t *option="")
	Delete this object.

virtual void	DrawClass () const
	Draw class inheritance tree of the class to which this object belongs.

virtual TObject *	DrawClone (Option_t *option="") const
	Draw a clone of this object in the current selected pad with: `gROOT->SetSelectedPad(c1)`.

virtual void	Dump () const
	Dump contents of object on stdout.

virtual void	Error (const char method, const char msgfmt,...) const
	Issue error message.

virtual void	Execute (const char method, const char params, Int_t *error=nullptr)
	Execute method on this object with the given parameter string, e.g.

virtual void	Execute (TMethod method, TObjArray params, Int_t *error=nullptr)
	Execute method on this object with parameters stored in the TObjArray.

virtual void	Fatal (const char method, const char msgfmt,...) const
	Issue fatal error message.

virtual TObject *	FindObject (const char *name) const
	Must be redefined in derived classes.

virtual TObject *	FindObject (const TObject *obj) const
	Must be redefined in derived classes.

virtual Option_t *	GetDrawOption () const
	Get option used by the graphics system to draw this object.

virtual const char *	GetIconName () const
	Returns mime type name of object.

virtual char *	GetObjectInfo (Int_t px, Int_t py) const
	Returns string containing info about the object at position (px,py).

virtual Option_t *	GetOption () const

virtual UInt_t	GetUniqueID () const
	Return the unique object id.

virtual Bool_t	HandleTimer (TTimer *timer)
	Execute action in response of a timer timing out.

Bool_t	HasInconsistentHash () const
	Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e.

virtual void	Info (const char method, const char msgfmt,...) const
	Issue info message.

virtual Bool_t	InheritsFrom (const char *classname) const
	Returns kTRUE if object inherits from class "classname".

virtual Bool_t	InheritsFrom (const TClass *cl) const
	Returns kTRUE if object inherits from TClass cl.

virtual void	Inspect () const
	Dump contents of this object in a graphics canvas.

void	InvertBit (UInt_t f)

Bool_t	IsDestructed () const
	IsDestructed.

virtual Bool_t	IsEqual (const TObject *obj) const
	Default equal comparison (objects are equal if they have the same address in memory).

virtual Bool_t	IsFolder () const
	Returns kTRUE in case object contains browsable objects (like containers or lists of other objects).

R__ALWAYS_INLINE Bool_t	IsOnHeap () const

R__ALWAYS_INLINE Bool_t	IsZombie () const

void	MayNotUse (const char *method) const
	Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary).

virtual Bool_t	Notify ()
	This method must be overridden to handle object notification.

void	Obsolete (const char method, const char asOfVers, const char *removedFromVers) const
	Use this method to declare a method obsolete.

void	operator delete (void *ptr)
	Operator delete.

void	operator delete[] (void *ptr)
	Operator delete [].

void *	operator new (size_t sz)

void *	operator new (size_t sz, void *vp)

void *	operator new[] (size_t sz)

void *	operator new[] (size_t sz, void *vp)

TObject &	operator= (const TObject &rhs)
	TObject assignment operator.

virtual void	Pop ()
	Pop on object drawn in a pad to the top of the display list.

virtual Int_t	Read (const char *name)
	Read contents of object with specified name from the current directory.

virtual void	RecursiveRemove (TObject *obj)
	Recursively remove this object from a list.

void	ResetBit (UInt_t f)

virtual void	SaveAs (const char filename="", Option_t option="") const
	Save this object in the file specified by filename.

void	SetBit (UInt_t f)

void	SetBit (UInt_t f, Bool_t set)
	Set or unset the user status bits as specified in f.

virtual void	SetDrawOption (Option_t *option="")
	Set drawing option for object.

virtual void	SetUniqueID (UInt_t uid)
	Set the unique object id.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

virtual void	SysError (const char method, const char msgfmt,...) const
	Issue system error message.

R__ALWAYS_INLINE Bool_t	TestBit (UInt_t f) const

Int_t	TestBits (UInt_t f) const

virtual void	UseCurrentStyle ()
	Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked.

virtual void	Warning (const char method, const char msgfmt,...) const
	Issue warning message.

virtual Int_t	Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0)
	Write this object to the current directory.

virtual Int_t	Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) const
	Write this object to the current directory.

Static Public Member Functions
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

Static Public Member Functions inherited from TGeoTube
static Double_t	Capacity (Double_t rmin, Double_t rmax, Double_t dz)
	Computes capacity of the shape in [length^3].

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static void	ComputeNormalS (const Double_t point, const Double_t dir, Double_t *norm, Double_t rmin, Double_t rmax, Double_t dz)
	Compute normal to closest surface from POINT.

static const char *	DeclFileName ()

static Double_t	DistFromInsideS (const Double_t point, const Double_t dir, Double_t rmin, Double_t rmax, Double_t dz)
	Compute distance from inside point to surface of the tube (static) Boundary safe algorithm.

static Double_t	DistFromOutsideS (const Double_t point, const Double_t dir, Double_t rmin, Double_t rmax, Double_t dz)
	Static method to compute distance from outside point to a tube with given parameters Boundary safe algorithm.

static void	DistToTube (Double_t rsq, Double_t nsq, Double_t rdotn, Double_t radius, Double_t &b, Double_t &delta)
	Static method computing the distance to a tube with given radius, starting from POINT along DIR director cosines.

static Double_t	SafetyS (const Double_t *point, Bool_t in, Double_t rmin, Double_t rmax, Double_t dz, Int_t skipz=0)
	computes the closest distance from given point to this shape, according to option.

Static Public Member Functions inherited from TGeoBBox
static Bool_t	AreOverlapping (const TGeoBBox box1, const TGeoMatrix mat1, const TGeoBBox box2, const TGeoMatrix mat2)
	Check if 2 positioned boxes overlap.

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static Bool_t	Contains (const Double_t point, Double_t dx, Double_t dy, Double_t dz, const Double_t origin)
	Static method to check if point[3] is located inside a box of having dx, dy, dz as half-lengths.

static const char *	DeclFileName ()

static Double_t	DistFromInside (const Double_t point, const Double_t dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big())
	Compute distance from inside point to surface of the box.

static Double_t	DistFromOutside (const Double_t point, const Double_t dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big())
	Compute distance from outside point to surface of the box.

Static Public Member Functions inherited from TGeoShape
static Double_t	Big ()

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static Double_t	ComputeEpsMch ()
	Compute machine round-off double precision error as the smallest number that if added to 1.0 is different than 1.0.

static const char *	DeclFileName ()

static Double_t	DistToPhiMin (const Double_t point, const Double_t dir, Double_t s1, Double_t c1, Double_t s2, Double_t c2, Double_t sm, Double_t cm, Bool_t in=kTRUE)
	compute distance from point (inside phi) to both phi planes. Return minimum.

static Double_t	EpsMch ()
	static function returning the machine round-off error

static TGeoMatrix *	GetTransform ()
	Returns current transformation matrix that applies to shape.

static Bool_t	IsCloseToPhi (Double_t epsil, const Double_t *point, Double_t c1, Double_t s1, Double_t c2, Double_t s2)
	True if point is closer than epsil to one of the phi planes defined by c1,s1 or c2,s2.

static Bool_t	IsCrossingSemiplane (const Double_t point, const Double_t dir, Double_t cphi, Double_t sphi, Double_t &snext, Double_t &rxy)
	Compute distance from POINT to semiplane defined by PHI angle along DIR.

static Bool_t	IsInPhiRange (const Double_t *point, Double_t phi1, Double_t phi2)
	Static method to check if a point is in the phi range (phi1, phi2) [degrees].

static Bool_t	IsSameWithinTolerance (Double_t a, Double_t b)
	Check if two numbers differ with less than a tolerance.

static Bool_t	IsSegCrossing (Double_t x1, Double_t y1, Double_t x2, Double_t y2, Double_t x3, Double_t y3, Double_t x4, Double_t y4)
	Check if segments (A,B) and (C,D) are crossing, where: A(x1,y1), B(x2,y2), C(x3,y3), D(x4,y4)

static void	NormalPhi (const Double_t point, const Double_t dir, Double_t *norm, Double_t c1, Double_t s1, Double_t c2, Double_t s2)
	Static method to compute normal to phi planes.

static Double_t	SafetyPhi (const Double_t *point, Bool_t in, Double_t phi1, Double_t phi2)
	Static method to compute safety w.r.t a phi corner defined by cosines/sines of the angles phi1, phi2.

static Double_t	SafetySeg (Double_t r, Double_t z, Double_t r1, Double_t z1, Double_t r2, Double_t z2, Bool_t outer)
	Compute distance from point of coordinates (r,z) to segment (r1,z1):(r2,z2)

static void	SetTransform (TGeoMatrix *matrix)
	Set current transformation matrix that applies to shape.

static Double_t	Tolerance ()

Static Public Member Functions inherited from TNamed
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

Static Public Member Functions inherited from TObject
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

static Longptr_t	GetDtorOnly ()
	Return destructor only flag.

static Bool_t	GetObjectStat ()
	Get status of object stat flag.

static void	SetDtorOnly (void *obj)
	Set destructor only flag.

static void	SetObjectStat (Bool_t stat)
	Turn on/off tracking of objects in the TObjectTable.

Protected Attributes
Double_t	fStIn

Double_t	fStOut

Protected Attributes inherited from TGeoTube
Double_t	fDz

Double_t	fRmax

Double_t	fRmin

Protected Attributes inherited from TGeoBBox
Double_t	fDX

Double_t	fDY

Double_t	fDZ

Double_t	fOrigin [3]

Protected Attributes inherited from TGeoShape
UInt_t	fShapeBits

Int_t	fShapeId

Protected Attributes inherited from TNamed
TString	fName

TString	fTitle

Private Member Functions
	TGeoHype (const TGeoHype &)=delete

TGeoHype &	operator= (const TGeoHype &)=delete

Private Attributes
Double_t	fTin

Double_t	fTinsq

Double_t	fTout

Double_t	fToutsq

Additional Inherited Members
Public Types inherited from TGeoShape
enum	EShapeType { kBitMask32 = 0xffffffff , kGeoNoShape = 0 , kGeoBad = (1ULL << ( 0 )) , kGeoRSeg = (1ULL << ( 1 )) , kGeoPhiSeg = (1ULL << ( 2 )) , kGeoThetaSeg = (1ULL << ( 3 )) , kGeoVisX = (1ULL << ( 4 )) , kGeoVisY = (1ULL << ( 5 )) , kGeoVisZ = (1ULL << ( 6 )) , kGeoRunTimeShape = (1ULL << ( 7 )) , kGeoInvalidShape = (1ULL << ( 8 )) , kGeoTorus = (1ULL << ( 9 )) , kGeoBox = (1ULL << ( 10 )) , kGeoPara = (1ULL << ( 11 )) , kGeoSph = (1ULL << ( 12 )) , kGeoTube = (1ULL << ( 13 )) , kGeoTubeSeg = (1ULL << ( 14 )) , kGeoCone = (1ULL << ( 15 )) , kGeoConeSeg = (1ULL << ( 16 )) , kGeoPcon = (1ULL << ( 17 )) , kGeoPgon = (1ULL << ( 18 )) , kGeoArb8 = (1ULL << ( 19 )) , kGeoEltu = (1ULL << ( 20 )) , kGeoTrap = (1ULL << ( 21 )) , kGeoCtub = (1ULL << ( 22 )) , kGeoTrd1 = (1ULL << ( 23 )) , kGeoTrd2 = (1ULL << ( 24 )) , kGeoComb = (1ULL << ( 25 )) , kGeoClosedShape = (1ULL << ( 26 )) , kGeoXtru = (1ULL << ( 27 )) , kGeoParaboloid = (1ULL << ( 28 )) , kGeoHalfSpace = (1ULL << ( 29 )) , kGeoHype = (1ULL << ( 30 )) , kGeoSavePrimitive = (1ULL << ( 20 )) }

Public Types inherited from TObject
enum	{ kIsOnHeap = 0x01000000 , kNotDeleted = 0x02000000 , kZombie = 0x04000000 , kInconsistent = 0x08000000 , kBitMask = 0x00ffffff }

enum	{ kSingleKey = (1ULL << ( 0 )) , kOverwrite = (1ULL << ( 1 )) , kWriteDelete = (1ULL << ( 2 )) }

enum	EDeprecatedStatusBits { kObjInCanvas = (1ULL << ( 3 )) }

enum	EStatusBits { kCanDelete = (1ULL << ( 0 )) , kMustCleanup = (1ULL << ( 3 )) , kIsReferenced = (1ULL << ( 4 )) , kHasUUID = (1ULL << ( 5 )) , kCannotPick = (1ULL << ( 6 )) , kNoContextMenu = (1ULL << ( 8 )) , kInvalidObject = (1ULL << ( 13 )) }

Protected Types inherited from TObject
enum	{ kOnlyPrepStep = (1ULL << ( 3 )) }

Protected Member Functions inherited from TGeoTube
	TGeoTube (const TGeoTube &)=delete

TGeoTube &	operator= (const TGeoTube &)=delete

Protected Member Functions inherited from TGeoBBox
	TGeoBBox (const TGeoBBox &)=delete

virtual void	FillBuffer3D (TBuffer3D &buffer, Int_t reqSections, Bool_t localFrame) const
	Fills the supplied buffer, with sections in desired frame See TBuffer3D.h for explanation of sections, frame etc.

TGeoBBox &	operator= (const TGeoBBox &)=delete

Protected Member Functions inherited from TGeoShape
Int_t	GetBasicColor () const
	Get the basic color (0-7).

void	SetOnBoundary (Bool_t)

void	TransformPoints (Double_t *points, UInt_t NbPoints) const
	Tranform a set of points (LocalToMaster)

Protected Member Functions inherited from TObject
virtual void	DoError (int level, const char location, const char fmt, va_list va) const
	Interface to ErrorHandler (protected).

void	MakeZombie ()

#include <TGeoHype.h>

Inheritance diagram for TGeoHype:

[legend]

Constructor & Destructor Documentation

◆ TGeoHype() [1/5]

TGeoHype::TGeoHype ( const TGeoHype & )

privatedelete

◆ TGeoHype() [2/5]

TGeoHype::TGeoHype ( )

Default constructor.

Definition at line 92 of file TGeoHype.cxx.

◆ TGeoHype() [3/5]

TGeoHype::TGeoHype	(	Double_t	rin,
		Double_t	stin,
		Double_t	rout,
		Double_t	stout,
		Double_t	dz
	)

Constructor specifying hyperboloid parameters.

Definition at line 107 of file TGeoHype.cxx.

◆ TGeoHype() [4/5]

TGeoHype::TGeoHype	(	const char *	name,
		Double_t	rin,
		Double_t	stin,
		Double_t	rout,
		Double_t	stout,
		Double_t	dz
	)

Constructor specifying parameters and name.

Definition at line 119 of file TGeoHype.cxx.

◆ TGeoHype() [5/5]

TGeoHype::TGeoHype ( Double_t * param )

Default constructor specifying a list of parameters.

param[0] = dz
param[1] = rin
param[2] = stin
param[3] = rout
param[4] = stout

Definition at line 137 of file TGeoHype.cxx.

◆ ~TGeoHype()

TGeoHype::~TGeoHype ( )

virtual

destructor

Definition at line 150 of file TGeoHype.cxx.

Member Function Documentation

◆ Capacity()

Double_t TGeoHype::Capacity ( ) const

virtual

Computes capacity of the shape in [length^3].

Reimplemented from TGeoTube.

Definition at line 157 of file TGeoHype.cxx.

◆ Class()

static TClass * TGeoHype::Class ( )

static

Returns: TClass describing this class

◆ Class_Name()

static const char * TGeoHype::Class_Name ( )

static

Returns: Name of this class

◆ Class_Version()

static constexpr Version_t TGeoHype::Class_Version ( )

inlinestaticconstexpr

Returns: Version of this class

Definition at line 91 of file TGeoHype.h.

◆ ComputeBBox()

void TGeoHype::ComputeBBox ( )

virtual

Compute bounding box of the hyperboloid.

Reimplemented from TGeoTube.

Definition at line 167 of file TGeoHype.cxx.

◆ ComputeNormal()

void TGeoHype::ComputeNormal	(	const Double_t *	point,
		const Double_t *	dir,
		Double_t *	norm
	)

virtual

Compute normal to closest surface from POINT.

Reimplemented from TGeoTube.

Definition at line 187 of file TGeoHype.cxx.

◆ ComputeNormal_v()

void TGeoHype::ComputeNormal_v	(	const Double_t *	points,
		const Double_t *	dirs,
		Double_t *	norms,
		Int_t	vecsize
	)

virtual

Compute the normal for an array o points so that norm.dot.dir is positive Input: Arrays of point coordinates and directions + vector size Output: Array of normal directions.

Reimplemented from TGeoTube.

Definition at line 1021 of file TGeoHype.cxx.

◆ Contains()

Bool_t TGeoHype::Contains ( const Double_t * point ) const

virtual

test if point is inside this tube

Reimplemented from TGeoTube.

Definition at line 224 of file TGeoHype.cxx.

◆ Contains_v()

void TGeoHype::Contains_v	(	const Double_t *	points,
		Bool_t *	inside,
		Int_t	vecsize
	)		const

virtual

Check the inside status for each of the points in the array.

Input: Array of point coordinates + vector size Output: Array of Booleans for the inside of each point

Reimplemented from TGeoTube.

Definition at line 1011 of file TGeoHype.cxx.

◆ DeclFileName()

static const char * TGeoHype::DeclFileName ( )

inlinestatic

Returns: Name of the file containing the class declaration

Definition at line 91 of file TGeoHype.h.

◆ DistancetoPrimitive()

Int_t TGeoHype::DistancetoPrimitive	(	Int_t	px,
		Int_t	py
	)

virtual

compute closest distance from point px,py to each corner

Reimplemented from TGeoTube.

Definition at line 239 of file TGeoHype.cxx.

◆ DistFromInside()

Double_t TGeoHype::DistFromInside	(	const Double_t *	point,
		const Double_t *	dir,
		Int_t	iact = `1`,
		Double_t	step = `TGeoShape::Big()`,
		Double_t *	safe = `nullptr`
	)		const

virtual

Compute distance from inside point to surface of the hyperboloid.

Reimplemented from TGeoTube.

Definition at line 248 of file TGeoHype.cxx.

◆ DistFromInside_v()

void TGeoHype::DistFromInside_v	(	const Double_t *	points,
		const Double_t *	dirs,
		Double_t *	dists,
		Int_t	vecsize,
		Double_t *	step
	)		const

virtual

Compute distance from array of input points having directions specified by dirs. Store output in dists.

Reimplemented from TGeoTube.

Definition at line 1029 of file TGeoHype.cxx.

◆ DistFromOutside()

Double_t TGeoHype::DistFromOutside	(	const Double_t *	point,
		const Double_t *	dir,
		Int_t	iact = `1`,
		Double_t	step = `TGeoShape::Big()`,
		Double_t *	safe = `nullptr`
	)		const

virtual

compute distance from outside point to surface of the hyperboloid.

Reimplemented from TGeoTube.

Definition at line 288 of file TGeoHype.cxx.

◆ DistFromOutside_v()

void TGeoHype::DistFromOutside_v	(	const Double_t *	points,
		const Double_t *	dirs,
		Double_t *	dists,
		Int_t	vecsize,
		Double_t *	step
	)		const

virtual

Compute distance from array of input points having directions specified by dirs. Store output in dists.

Reimplemented from TGeoTube.

Definition at line 1037 of file TGeoHype.cxx.

◆ DistToHype()

Int_t TGeoHype::DistToHype	(	const Double_t *	point,
		const Double_t *	dir,
		Double_t *	s,
		Bool_t	inner,
		Bool_t	in
	)		const

Compute distance from an arbitrary point to inner/outer surface of hyperboloid.

Returns number of positive solutions. S[2] contains the solutions.

Definition at line 347 of file TGeoHype.cxx.

◆ Divide()

TGeoVolume * TGeoHype::Divide	(	TGeoVolume *	voldiv,
		const char *	divname,
		Int_t	iaxis,
		Int_t	ndiv,
		Double_t	start,
		Double_t	step
	)

virtual

Cannot divide hyperboloids.

Reimplemented from TGeoTube.

Definition at line 398 of file TGeoHype.cxx.

◆ GetAxisRange()

Double_t TGeoHype::GetAxisRange	(	Int_t	iaxis,
		Double_t &	xlo,
		Double_t &	xhi
	)		const

virtual

Get range of shape for a given axis.

Reimplemented from TGeoTube.

Definition at line 408 of file TGeoHype.cxx.

◆ GetBoundingCylinder()

void TGeoHype::GetBoundingCylinder ( Double_t * param ) const

virtual

Fill vector param[4] with the bounding cylinder parameters.

The order is the following : Rmin, Rmax, Phi1, Phi2, dZ

Reimplemented from TGeoTube.

Definition at line 437 of file TGeoHype.cxx.

◆ GetBuffer3D()

const TBuffer3D & TGeoHype::GetBuffer3D	(	Int_t	reqSections,
		Bool_t	localFrame
	)		const

virtual

Fills a static 3D buffer and returns a reference.

Reimplemented from TGeoTube.

Definition at line 977 of file TGeoHype.cxx.

◆ GetByteCount()

virtual Int_t TGeoHype::GetByteCount ( ) const

inlinevirtual

Reimplemented from TGeoTube.

Definition at line 66 of file TGeoHype.h.

◆ GetMakeRuntimeShape()

TGeoShape * TGeoHype::GetMakeRuntimeShape	(	TGeoShape *	mother,
		TGeoMatrix *	mat
	)		const

virtual

in case shape has some negative parameters, these has to be computed in order to fit the mother

Reimplemented from TGeoTube.

Definition at line 451 of file TGeoHype.cxx.

◆ GetMeshNumbers()

void TGeoHype::GetMeshNumbers	(	Int_t &	nvert,
		Int_t &	nsegs,
		Int_t &	npols
	)		const

virtual

Returns numbers of vertices, segments and polygons composing the shape mesh.

Reimplemented from TGeoTube.

Definition at line 948 of file TGeoHype.cxx.

◆ GetNmeshVertices()

Int_t TGeoHype::GetNmeshVertices ( ) const

virtual

Return number of vertices of the mesh representation.

Reimplemented from TGeoTube.

Definition at line 960 of file TGeoHype.cxx.

◆ GetPointsOnSegments()

virtual Bool_t TGeoHype::GetPointsOnSegments	(	Int_t	npoints,
		Double_t *	array
	)		const

inlinevirtual

Fills array with n random points located on the line segments of the shape mesh.

The output array must be provided with a length of minimum 3*npoints. Returns true if operation is implemented.

Reimplemented from TGeoTube.

Definition at line 67 of file TGeoHype.h.

◆ GetStIn()

Double_t TGeoHype::GetStIn ( ) const

inline

Definition at line 71 of file TGeoHype.h.

◆ GetStOut()

Double_t TGeoHype::GetStOut ( ) const

inline

Definition at line 72 of file TGeoHype.h.

◆ HasInner()

Bool_t TGeoHype::HasInner ( ) const

inline

Definition at line 73 of file TGeoHype.h.

◆ InspectShape()

void TGeoHype::InspectShape ( ) const

virtual

print shape parameters

Reimplemented from TGeoTube.

Definition at line 471 of file TGeoHype.cxx.

◆ IsA()

virtual TClass * TGeoHype::IsA ( ) const

inlinevirtual

Returns: TClass describing current object

Reimplemented from TGeoTube.

Definition at line 91 of file TGeoHype.h.

◆ IsCylType()

virtual Bool_t TGeoHype::IsCylType ( ) const

inlinevirtual

Reimplemented from TGeoTube.

Definition at line 77 of file TGeoHype.h.

◆ MakeBuffer3D()

TBuffer3D * TGeoHype::MakeBuffer3D ( ) const

virtual

Creates a TBuffer3D describing this shape.

Coordinates are in local reference frame.

Reimplemented from TGeoTube.

Definition at line 488 of file TGeoHype.cxx.

◆ operator=()

TGeoHype & TGeoHype::operator= ( const TGeoHype & )

privatedelete

◆ RadiusHypeSq()

Double_t TGeoHype::RadiusHypeSq	(	Double_t	z,
		Bool_t	inner
	)		const

Compute r^2 = x^2 + y^2 at a given z coordinate, for either inner or outer hyperbolas.

Definition at line 707 of file TGeoHype.cxx.

◆ Safety()

Double_t TGeoHype::Safety	(	const Double_t *	point,
		Bool_t	in = `kTRUE`
	)		const

virtual

computes the closest distance from given point to this shape, according to option.

The matching point on the shape is stored in spoint.

Reimplemented from TGeoTube.

Definition at line 741 of file TGeoHype.cxx.

◆ Safety_v()

void TGeoHype::Safety_v	(	const Double_t *	points,
		const Bool_t *	inside,
		Double_t *	safe,
		Int_t	vecsize
	)		const

virtual

Compute safe distance from each of the points in the input array.

Input: Array of point coordinates, array of statuses for these points, size of the arrays Output: Safety values

Reimplemented from TGeoTube.

Definition at line 1047 of file TGeoHype.cxx.

◆ SafetyToHype()

Double_t TGeoHype::SafetyToHype	(	const Double_t *	point,
		Bool_t	inner,
		Bool_t	in
	)		const

Compute an underestimate of the closest distance from a point to inner or outer infinite hyperbolas.

Definition at line 764 of file TGeoHype.cxx.

◆ SavePrimitive()

void TGeoHype::SavePrimitive	(	std::ostream &	out,
		Option_t *	option = `""`
	)

virtual

Save a primitive as a C++ statement(s) on output stream "out".

Reimplemented from TGeoTube.

Definition at line 800 of file TGeoHype.cxx.

◆ SetDimensions()

void TGeoHype::SetDimensions ( Double_t * param )

virtual

Set dimensions of the hyperboloid starting from an array.

param[0] = dz
param[1] = rin
param[2] = stin
param[3] = rout
param[4] = stout

Reimplemented from TGeoTube.

Definition at line 839 of file TGeoHype.cxx.

◆ SetHypeDimensions()

void TGeoHype::SetHypeDimensions	(	Double_t	rin,
		Double_t	stin,
		Double_t	rout,
		Double_t	stout,
		Double_t	dz
	)

Set dimensions of the hyperboloid.

Definition at line 816 of file TGeoHype.cxx.

◆ SetPoints() [1/2]

void TGeoHype::SetPoints ( Double_t * points ) const

virtual

create tube mesh points

Reimplemented from TGeoTube.

Definition at line 852 of file TGeoHype.cxx.

◆ SetPoints() [2/2]

void TGeoHype::SetPoints ( Float_t * points ) const

virtual

create tube mesh points

Reimplemented from TGeoTube.

Definition at line 900 of file TGeoHype.cxx.

◆ SetSegsAndPols()

void TGeoHype::SetSegsAndPols ( TBuffer3D & buff ) const

virtual

Fill TBuffer3D structure for segments and polygons.

Reimplemented from TGeoTube.

Definition at line 510 of file TGeoHype.cxx.

◆ Sizeof3D()

void TGeoHype::Sizeof3D ( ) const

virtual

fill size of this 3-D object

Reimplemented from TGeoTube.

Definition at line 970 of file TGeoHype.cxx.

◆ Streamer()

virtual void TGeoHype::Streamer ( TBuffer & R__b )

virtual

Stream an object of class TObject.

Reimplemented from TGeoTube.

◆ StreamerNVirtual()

void TGeoHype::StreamerNVirtual ( TBuffer & ClassDef_StreamerNVirtual_b )

inline

Definition at line 91 of file TGeoHype.h.

◆ ZHypeSq()

Double_t TGeoHype::ZHypeSq	(	Double_t	r,
		Bool_t	inner
	)		const

Compute z^2 at a given r^2, for either inner or outer hyperbolas.

Definition at line 723 of file TGeoHype.cxx.

Member Data Documentation

◆ fStIn

Double_t TGeoHype::fStIn

protected

Definition at line 24 of file TGeoHype.h.

◆ fStOut

Double_t TGeoHype::fStOut

protected

Definition at line 25 of file TGeoHype.h.

◆ fTin

Double_t TGeoHype::fTin

private

Definition at line 29 of file TGeoHype.h.

◆ fTinsq

Double_t TGeoHype::fTinsq

private

Definition at line 31 of file TGeoHype.h.

◆ fTout

Double_t TGeoHype::fTout

private

Definition at line 30 of file TGeoHype.h.

◆ fToutsq

Double_t TGeoHype::fToutsq

private

Definition at line 32 of file TGeoHype.h.

Libraries for TGeoHype:

[legend]

The documentation for this class was generated from the following files:

geom/geom/inc/TGeoHype.h
geom/geom/src/TGeoHype.cxx

Public Member Functions

Static Public Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Additional Inherited Members

Constructor & Destructor Documentation

◆ TGeoHype() [1/5]

◆ TGeoHype() [2/5]

◆ TGeoHype() [3/5]

◆ TGeoHype() [4/5]

◆ TGeoHype() [5/5]

◆ ~TGeoHype()

Member Function Documentation

◆ Capacity()

◆ Class()

◆ Class_Name()

◆ Class_Version()

◆ ComputeBBox()

◆ ComputeNormal()

◆ ComputeNormal_v()

◆ Contains()

◆ Contains_v()

◆ DeclFileName()

◆ DistancetoPrimitive()

◆ DistFromInside()

◆ DistFromInside_v()

◆ DistFromOutside()

◆ DistFromOutside_v()

◆ DistToHype()

◆ Divide()

◆ GetAxisRange()

◆ GetBoundingCylinder()

◆ GetBuffer3D()

◆ GetByteCount()

◆ GetMakeRuntimeShape()

◆ GetMeshNumbers()

◆ GetNmeshVertices()

◆ GetPointsOnSegments()

◆ GetStIn()

◆ GetStOut()

◆ HasInner()

◆ InspectShape()

◆ IsA()

◆ IsCylType()

◆ MakeBuffer3D()

◆ operator=()

◆ RadiusHypeSq()

◆ Safety()

◆ Safety_v()

◆ SafetyToHype()

◆ SavePrimitive()

◆ SetDimensions()

◆ SetHypeDimensions()

◆ SetPoints() [1/2]

◆ SetPoints() [2/2]

◆ SetSegsAndPols()

◆ Sizeof3D()

◆ Streamer()

◆ StreamerNVirtual()

◆ ZHypeSq()

Member Data Documentation

◆ fStIn

◆ fStOut

◆ fTin

◆ fTinsq

◆ fTout

◆ fToutsq