A tube segment is a tube having a range in phi.

The tube segment class derives from **TGeoTube**, having 2 extra parameters: phi1 and phi2.

TGeoTubeSeg(Double_t rmin,Double_t rmax,Double_t dz,

TGeoTubeSeg::TGeoTubeSeg

TGeoTubeSeg()

Default constructor.

Here phi1 and phi2are the starting and ending phivalues in degrees. The general phi convention is that the shape ranges from phi1 to phi2 going counterclockwise. The angles can be defined with either negative or positive values. They are stored such that phi1 is converted to [0,360] and phi2 > phi1.

Definition at line 91 of file TGeoTube.h.

Public Member Functions
	TGeoTubeSeg ()
	Default constructor.

	TGeoTubeSeg (const char *name, Double_t rmin, Double_t rmax, Double_t dz, Double_t phi1, Double_t phi2)
	Default constructor specifying minimum and maximum radius The segment will be from phiStart to phiEnd expressed in degree.

	TGeoTubeSeg (Double_t *params)
	Default constructor specifying minimum and maximum radius.

	TGeoTubeSeg (Double_t rmin, Double_t rmax, Double_t dz, Double_t phi1, Double_t phi2)
	Default constructor specifying minimum and maximum radius.

virtual	~TGeoTubeSeg ()
	destructor

virtual void	AfterStreamer ()
	Function called after streaming an object of this class.

virtual Double_t	Capacity () const
	Computes capacity of the shape in [length^3].

virtual void	ComputeBBox ()
	compute bounding box of the tube segment

virtual void	ComputeNormal (const Double_t point, const Double_t dir, Double_t *norm)
	Compute normal to closest surface from POINT.

virtual void	ComputeNormal_v (const Double_t points, const Double_t dirs, Double_t *norms, Int_t vecsize)
	Compute the normal for an array o points so that norm.dot.dir is positive Input: Arrays of point coordinates and directions + vector size Output: Array of normal directions.

virtual Bool_t	Contains (const Double_t *point) const
	test if point is inside this tube segment first check if point is inside the tube

virtual void	Contains_v (const Double_t points, Bool_t inside, Int_t vecsize) const
	Check the inside status for each of the points in the array.

virtual Int_t	DistancetoPrimitive (Int_t px, Int_t py)
	compute closest distance from point px,py to each corner

virtual Double_t	DistFromInside (const Double_t point, const Double_t dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const
	Compute distance from inside point to surface of the tube segment Boundary safe algorithm.

virtual void	DistFromInside_v (const Double_t points, const Double_t dirs, Double_t dists, Int_t vecsize, Double_t step) const
	Compute distance from array of input points having directions specified by dirs. Store output in dists.

virtual Double_t	DistFromOutside (const Double_t point, const Double_t dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const
	compute distance from outside point to surface of the tube segment fist localize point w.r.t tube

virtual void	DistFromOutside_v (const Double_t points, const Double_t dirs, Double_t dists, Int_t vecsize, Double_t step) const
	Compute distance from array of input points having directions specified by dirs. Store output in dists.

virtual TGeoVolume *	Divide (TGeoVolume voldiv, const char divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step)
	Divide this tube segment shape belonging to volume "voldiv" into ndiv volumes called divname, from start position with the given step.

virtual Double_t	GetAxisRange (Int_t iaxis, Double_t &xlo, Double_t &xhi) const
	Get range of shape for a given axis.

virtual void	GetBoundingCylinder (Double_t *param) const
	Fill vector param[4] with the bounding cylinder parameters.

virtual const TBuffer3D &	GetBuffer3D (Int_t reqSections, Bool_t localFrame) const
	Fills a static 3D buffer and returns a reference.

virtual Int_t	GetByteCount () const

virtual TGeoShape *	GetMakeRuntimeShape (TGeoShape mother, TGeoMatrix mat) const
	in case shape has some negative parameters, these has to be computed in order to fit the mother

virtual void	GetMeshNumbers (Int_t &nvert, Int_t &nsegs, Int_t &npols) const
	Returns numbers of vertices, segments and polygons composing the shape mesh.

virtual Int_t	GetNmeshVertices () const
	Return number of vertices of the mesh representation.

Double_t	GetPhi1 () const

Double_t	GetPhi2 () const

virtual Bool_t	GetPointsOnSegments (Int_t npoints, Double_t *array) const
	Fills array with n random points located on the line segments of the shape mesh.

virtual void	InspectShape () const
	print shape parameters

virtual TClass *	IsA () const

virtual TBuffer3D *	MakeBuffer3D () const
	Creates a TBuffer3D describing this shape.

virtual Double_t	Safety (const Double_t *point, Bool_t in=kTRUE) const
	computes the closest distance from given point InitTrigonometry();to this shape, according to option.

virtual void	Safety_v (const Double_t points, const Bool_t inside, Double_t *safe, Int_t vecsize) const
	Compute safe distance from each of the points in the input array.

virtual void	SavePrimitive (std::ostream &out, Option_t *option="")
	Save a primitive as a C++ statement(s) on output stream "out".

virtual void	SetDimensions (Double_t *param)
	Set dimensions of the tube segment starting from a list.

virtual void	SetPoints (Double_t *points) const
	Create tube segment mesh points.

virtual void	SetPoints (Float_t *points) const
	Create tube segment mesh points.

virtual void	SetSegsAndPols (TBuffer3D &buff) const
	Fill TBuffer3D structure for segments and polygons.

void	SetTubsDimensions (Double_t rmin, Double_t rmax, Double_t dz, Double_t phi1, Double_t phi2)
	Set dimensions of the tube segment.

virtual void	Sizeof3D () const
	fill size of this 3-D object

virtual void	Streamer (TBuffer &)
	Stream an object of class TObject.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TGeoTube
	TGeoTube ()
	Default constructor.

	TGeoTube (const char *name, Double_t rmin, Double_t rmax, Double_t dz)
	Default constructor specifying minimum and maximum radius.

	TGeoTube (Double_t *params)
	Default constructor specifying minimum and maximum radius.

	TGeoTube (Double_t rmin, Double_t rmax, Double_t dz)
	Default constructor specifying minimum and maximum radius.

virtual	~TGeoTube ()
	destructor

virtual const char *	GetAxisName (Int_t iaxis) const
	Returns name of axis IAXIS.

virtual Double_t	GetDz () const

virtual Double_t	GetRmax () const

virtual Double_t	GetRmin () const

Bool_t	HasRmin () const

virtual Bool_t	IsCylType () const

void	SetTubeDimensions (Double_t rmin, Double_t rmax, Double_t dz)
	Set tube dimensions.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TGeoBBox
	TGeoBBox ()
	Default constructor.

	TGeoBBox (const char name, Double_t dx, Double_t dy, Double_t dz, Double_t origin=nullptr)
	Constructor with shape name.

	TGeoBBox (Double_t *param)
	Constructor based on the array of parameters.

	TGeoBBox (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=nullptr)
	Constructor where half-lengths are provided.

virtual	~TGeoBBox ()
	Destructor.

virtual Bool_t	CouldBeCrossed (const Double_t point, const Double_t dir) const
	Decides fast if the bounding box could be crossed by a vector.

virtual Double_t	GetDX () const

virtual Double_t	GetDY () const

virtual Double_t	GetDZ () const

virtual Double_t	GetFacetArea (Int_t index=0) const
	Get area in internal units of the facet with a given index.

virtual Int_t	GetFittingBox (const TGeoBBox parambox, TGeoMatrix mat, Double_t &dx, Double_t &dy, Double_t &dz) const
	Fills real parameters of a positioned box inside this one. Returns 0 if successful.

virtual const Double_t *	GetOrigin () const

virtual Bool_t	GetPointsOnFacet (Int_t index, Int_t npoints, Double_t *array) const
	Fills array with n random points located on the surface of indexed facet.

virtual Bool_t	IsNullBox () const

virtual Bool_t	IsValidBox () const

void	SetBoxDimensions (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=nullptr)
	Set parameters of the box.

void	SetBoxPoints (Double_t *points) const
	Fill box vertices to an array.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TGeoShape
	TGeoShape ()
	Default constructor.

	TGeoShape (const char *name)
	Default constructor.

virtual	~TGeoShape ()
	Destructor.

void	CheckShape (Int_t testNo, Int_t nsamples=10000, Option_t *option="")
	Test for shape navigation methods.

virtual void	ClearThreadData () const

virtual void	CreateThreadData (Int_t)

virtual void	Draw (Option_t *option="")
	Draw this shape.

virtual void	ExecuteEvent (Int_t event, Int_t px, Int_t py)
	Execute mouse actions on this shape.

Int_t	GetId () const

virtual const char *	GetName () const
	Get the shape name.

const char *	GetPointerName () const
	Provide a pointer name containing uid.

void	InvertShapeBit (UInt_t f)

virtual Bool_t	IsAssembly () const

virtual Bool_t	IsComposite () const

virtual Bool_t	IsReflected () const

Bool_t	IsRunTimeShape () const

Bool_t	IsValid () const

virtual Bool_t	IsVecGeom () const

virtual void	Paint (Option_t *option="")
	Paint this shape.

void	ResetShapeBit (UInt_t f)

void	SetId (Int_t id)

void	SetRuntime (Bool_t flag=kTRUE)

void	SetShapeBit (UInt_t f)

void	SetShapeBit (UInt_t f, Bool_t set)
	Equivalent of TObject::SetBit.

Int_t	ShapeDistancetoPrimitive (Int_t numpoints, Int_t px, Int_t py) const
	Returns distance to shape primitive mesh.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Bool_t	TestShapeBit (UInt_t f) const

Int_t	TestShapeBits (UInt_t f) const

Public Member Functions inherited from TNamed
	TNamed ()

	TNamed (const char name, const char title)

	TNamed (const TNamed &named)
	TNamed copy ctor.

	TNamed (const TString &name, const TString &title)

virtual	~TNamed ()
	TNamed destructor.

void	Clear (Option_t *option="") override
	Set name and title to empty strings ("").

TObject *	Clone (const char *newname="") const override
	Make a clone of an object using the Streamer facility.

Int_t	Compare (const TObject *obj) const override
	Compare two TNamed objects.

void	Copy (TObject &named) const override
	Copy this to obj.

virtual void	FillBuffer (char *&buffer)
	Encode TNamed into output buffer.

const char *	GetName () const override
	Returns name of object.

const char *	GetTitle () const override
	Returns title of object.

ULong_t	Hash () const override
	Return hash value for this object.

TClass *	IsA () const override

Bool_t	IsSortable () const override

void	ls (Option_t *option="") const override
	List TNamed name and title.

TNamed &	operator= (const TNamed &rhs)
	TNamed assignment operator.

void	Print (Option_t *option="") const override
	Print TNamed name and title.

virtual void	SetName (const char *name)
	Set the name of the TNamed.

virtual void	SetNameTitle (const char name, const char title)
	Set all the TNamed parameters (name and title).

virtual void	SetTitle (const char *title="")
	Set the title of the TNamed.

virtual Int_t	Sizeof () const
	Return size of the TNamed part of the TObject.

void	Streamer (TBuffer &) override
	Stream an object of class TObject.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TObject
	TObject ()
	TObject constructor.

	TObject (const TObject &object)
	TObject copy ctor.

virtual	~TObject ()
	TObject destructor.

void	AbstractMethod (const char *method) const
	Use this method to implement an "abstract" method that you don't want to leave purely abstract.

virtual void	AppendPad (Option_t *option="")
	Append graphics object to current pad.

virtual void	Browse (TBrowser *b)
	Browse object. May be overridden for another default action.

ULong_t	CheckedHash ()
	Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object.

virtual const char *	ClassName () const
	Returns name of class to which the object belongs.

virtual void	Delete (Option_t *option="")
	Delete this object.

virtual void	DrawClass () const
	Draw class inheritance tree of the class to which this object belongs.

virtual TObject *	DrawClone (Option_t *option="") const
	Draw a clone of this object in the current selected pad with: `gROOT->SetSelectedPad(c1)`.

virtual void	Dump () const
	Dump contents of object on stdout.

virtual void	Error (const char method, const char msgfmt,...) const
	Issue error message.

virtual void	Execute (const char method, const char params, Int_t *error=nullptr)
	Execute method on this object with the given parameter string, e.g.

virtual void	Execute (TMethod method, TObjArray params, Int_t *error=nullptr)
	Execute method on this object with parameters stored in the TObjArray.

virtual void	Fatal (const char method, const char msgfmt,...) const
	Issue fatal error message.

virtual TObject *	FindObject (const char *name) const
	Must be redefined in derived classes.

virtual TObject *	FindObject (const TObject *obj) const
	Must be redefined in derived classes.

virtual Option_t *	GetDrawOption () const
	Get option used by the graphics system to draw this object.

virtual const char *	GetIconName () const
	Returns mime type name of object.

virtual char *	GetObjectInfo (Int_t px, Int_t py) const
	Returns string containing info about the object at position (px,py).

virtual Option_t *	GetOption () const

virtual UInt_t	GetUniqueID () const
	Return the unique object id.

virtual Bool_t	HandleTimer (TTimer *timer)
	Execute action in response of a timer timing out.

Bool_t	HasInconsistentHash () const
	Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e.

virtual void	Info (const char method, const char msgfmt,...) const
	Issue info message.

virtual Bool_t	InheritsFrom (const char *classname) const
	Returns kTRUE if object inherits from class "classname".

virtual Bool_t	InheritsFrom (const TClass *cl) const
	Returns kTRUE if object inherits from TClass cl.

virtual void	Inspect () const
	Dump contents of this object in a graphics canvas.

void	InvertBit (UInt_t f)

Bool_t	IsDestructed () const
	IsDestructed.

virtual Bool_t	IsEqual (const TObject *obj) const
	Default equal comparison (objects are equal if they have the same address in memory).

virtual Bool_t	IsFolder () const
	Returns kTRUE in case object contains browsable objects (like containers or lists of other objects).

R__ALWAYS_INLINE Bool_t	IsOnHeap () const

R__ALWAYS_INLINE Bool_t	IsZombie () const

void	MayNotUse (const char *method) const
	Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary).

virtual Bool_t	Notify ()
	This method must be overridden to handle object notification.

void	Obsolete (const char method, const char asOfVers, const char *removedFromVers) const
	Use this method to declare a method obsolete.

void	operator delete (void *ptr)
	Operator delete.

void	operator delete[] (void *ptr)
	Operator delete [].

void *	operator new (size_t sz)

void *	operator new (size_t sz, void *vp)

void *	operator new[] (size_t sz)

void *	operator new[] (size_t sz, void *vp)

TObject &	operator= (const TObject &rhs)
	TObject assignment operator.

virtual void	Pop ()
	Pop on object drawn in a pad to the top of the display list.

virtual Int_t	Read (const char *name)
	Read contents of object with specified name from the current directory.

virtual void	RecursiveRemove (TObject *obj)
	Recursively remove this object from a list.

void	ResetBit (UInt_t f)

virtual void	SaveAs (const char filename="", Option_t option="") const
	Save this object in the file specified by filename.

void	SetBit (UInt_t f)

void	SetBit (UInt_t f, Bool_t set)
	Set or unset the user status bits as specified in f.

virtual void	SetDrawOption (Option_t *option="")
	Set drawing option for object.

virtual void	SetUniqueID (UInt_t uid)
	Set the unique object id.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

virtual void	SysError (const char method, const char msgfmt,...) const
	Issue system error message.

R__ALWAYS_INLINE Bool_t	TestBit (UInt_t f) const

Int_t	TestBits (UInt_t f) const

virtual void	UseCurrentStyle ()
	Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked.

virtual void	Warning (const char method, const char msgfmt,...) const
	Issue warning message.

virtual Int_t	Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0)
	Write this object to the current directory.

virtual Int_t	Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) const
	Write this object to the current directory.

Static Public Member Functions
static Double_t	Capacity (Double_t rmin, Double_t rmax, Double_t dz, Double_t phi1, Double_t phi2)
	Computes capacity of the shape in [length^3].

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static void	ComputeNormalS (const Double_t point, const Double_t dir, Double_t *norm, Double_t rmin, Double_t rmax, Double_t dz, Double_t c1, Double_t s1, Double_t c2, Double_t s2)
	Compute normal to closest surface from POINT.

static const char *	DeclFileName ()

static Double_t	DistFromInsideS (const Double_t point, const Double_t dir, Double_t rmin, Double_t rmax, Double_t dz, Double_t c1, Double_t s1, Double_t c2, Double_t s2, Double_t cm, Double_t sm, Double_t cdfi)
	Compute distance from inside point to surface of the tube segment (static) Boundary safe algorithm.

static Double_t	DistFromOutsideS (const Double_t point, const Double_t dir, Double_t rmin, Double_t rmax, Double_t dz, Double_t c1, Double_t s1, Double_t c2, Double_t s2, Double_t cm, Double_t sm, Double_t cdfi)
	Static method to compute distance to arbitrary tube segment from outside point Boundary safe algorithm.

static Double_t	SafetyS (const Double_t *point, Bool_t in, Double_t rmin, Double_t rmax, Double_t dz, Double_t phi1, Double_t phi2, Int_t skipz=0)
	Static method to compute the closest distance from given point to this shape.

Static Public Member Functions inherited from TGeoTube
static Double_t	Capacity (Double_t rmin, Double_t rmax, Double_t dz)
	Computes capacity of the shape in [length^3].

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static void	ComputeNormalS (const Double_t point, const Double_t dir, Double_t *norm, Double_t rmin, Double_t rmax, Double_t dz)
	Compute normal to closest surface from POINT.

static const char *	DeclFileName ()

static Double_t	DistFromInsideS (const Double_t point, const Double_t dir, Double_t rmin, Double_t rmax, Double_t dz)
	Compute distance from inside point to surface of the tube (static) Boundary safe algorithm.

static Double_t	DistFromOutsideS (const Double_t point, const Double_t dir, Double_t rmin, Double_t rmax, Double_t dz)
	Static method to compute distance from outside point to a tube with given parameters Boundary safe algorithm.

static void	DistToTube (Double_t rsq, Double_t nsq, Double_t rdotn, Double_t radius, Double_t &b, Double_t &delta)
	Static method computing the distance to a tube with given radius, starting from POINT along DIR director cosines.

static Double_t	SafetyS (const Double_t *point, Bool_t in, Double_t rmin, Double_t rmax, Double_t dz, Int_t skipz=0)
	computes the closest distance from given point to this shape, according to option.

Static Public Member Functions inherited from TGeoBBox
static Bool_t	AreOverlapping (const TGeoBBox box1, const TGeoMatrix mat1, const TGeoBBox box2, const TGeoMatrix mat2)
	Check if 2 positioned boxes overlap.

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static Bool_t	Contains (const Double_t point, Double_t dx, Double_t dy, Double_t dz, const Double_t origin)
	Static method to check if point[3] is located inside a box of having dx, dy, dz as half-lengths.

static const char *	DeclFileName ()

static Double_t	DistFromInside (const Double_t point, const Double_t dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big())
	Compute distance from inside point to surface of the box.

static Double_t	DistFromOutside (const Double_t point, const Double_t dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big())
	Compute distance from outside point to surface of the box.

Static Public Member Functions inherited from TGeoShape
static Double_t	Big ()

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static Double_t	ComputeEpsMch ()
	Compute machine round-off double precision error as the smallest number that if added to 1.0 is different than 1.0.

static const char *	DeclFileName ()

static Double_t	DistToPhiMin (const Double_t point, const Double_t dir, Double_t s1, Double_t c1, Double_t s2, Double_t c2, Double_t sm, Double_t cm, Bool_t in=kTRUE)
	compute distance from point (inside phi) to both phi planes. Return minimum.

static Double_t	EpsMch ()
	static function returning the machine round-off error

static TGeoMatrix *	GetTransform ()
	Returns current transformation matrix that applies to shape.

static Bool_t	IsCloseToPhi (Double_t epsil, const Double_t *point, Double_t c1, Double_t s1, Double_t c2, Double_t s2)
	True if point is closer than epsil to one of the phi planes defined by c1,s1 or c2,s2.

static Bool_t	IsCrossingSemiplane (const Double_t point, const Double_t dir, Double_t cphi, Double_t sphi, Double_t &snext, Double_t &rxy)
	Compute distance from POINT to semiplane defined by PHI angle along DIR.

static Bool_t	IsInPhiRange (const Double_t *point, Double_t phi1, Double_t phi2)
	Static method to check if a point is in the phi range (phi1, phi2) [degrees].

static Bool_t	IsSameWithinTolerance (Double_t a, Double_t b)
	Check if two numbers differ with less than a tolerance.

static Bool_t	IsSegCrossing (Double_t x1, Double_t y1, Double_t x2, Double_t y2, Double_t x3, Double_t y3, Double_t x4, Double_t y4)
	Check if segments (A,B) and (C,D) are crossing, where: A(x1,y1), B(x2,y2), C(x3,y3), D(x4,y4)

static void	NormalPhi (const Double_t point, const Double_t dir, Double_t *norm, Double_t c1, Double_t s1, Double_t c2, Double_t s2)
	Static method to compute normal to phi planes.

static Double_t	SafetyPhi (const Double_t *point, Bool_t in, Double_t phi1, Double_t phi2)
	Static method to compute safety w.r.t a phi corner defined by cosines/sines of the angles phi1, phi2.

static Double_t	SafetySeg (Double_t r, Double_t z, Double_t r1, Double_t z1, Double_t r2, Double_t z2, Bool_t outer)
	Compute distance from point of coordinates (r,z) to segment (r1,z1):(r2,z2)

static void	SetTransform (TGeoMatrix *matrix)
	Set current transformation matrix that applies to shape.

static Double_t	Tolerance ()

Static Public Member Functions inherited from TNamed
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

Static Public Member Functions inherited from TObject
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

static Longptr_t	GetDtorOnly ()
	Return destructor only flag.

static Bool_t	GetObjectStat ()
	Get status of object stat flag.

static void	SetDtorOnly (void *obj)
	Set destructor only flag.

static void	SetObjectStat (Bool_t stat)
	Turn on/off tracking of objects in the TObjectTable.

Protected Member Functions
void	InitTrigonometry ()
	Init frequently used trigonometric values.

Protected Member Functions inherited from TGeoTube
	TGeoTube (const TGeoTube &)=delete

TGeoTube &	operator= (const TGeoTube &)=delete

Protected Member Functions inherited from TGeoBBox
	TGeoBBox (const TGeoBBox &)=delete

virtual void	FillBuffer3D (TBuffer3D &buffer, Int_t reqSections, Bool_t localFrame) const
	Fills the supplied buffer, with sections in desired frame See TBuffer3D.h for explanation of sections, frame etc.

TGeoBBox &	operator= (const TGeoBBox &)=delete

Protected Member Functions inherited from TGeoShape
Int_t	GetBasicColor () const
	Get the basic color (0-7).

void	SetOnBoundary (Bool_t)

void	TransformPoints (Double_t *points, UInt_t NbPoints) const
	Tranform a set of points (LocalToMaster)

Protected Member Functions inherited from TObject
virtual void	DoError (int level, const char location, const char fmt, va_list va) const
	Interface to ErrorHandler (protected).

void	MakeZombie ()

Protected Attributes
Double_t	fC1

Double_t	fC2

Double_t	fCdfi

Double_t	fCm

Double_t	fPhi1

Double_t	fPhi2

Double_t	fS1

Double_t	fS2

Double_t	fSm

Protected Attributes inherited from TGeoTube
Double_t	fDz

Double_t	fRmax

Double_t	fRmin

Protected Attributes inherited from TGeoBBox
Double_t	fDX

Double_t	fDY

Double_t	fDZ

Double_t	fOrigin [3]

Protected Attributes inherited from TGeoShape
UInt_t	fShapeBits

Int_t	fShapeId

Protected Attributes inherited from TNamed
TString	fName

TString	fTitle

Additional Inherited Members
Public Types inherited from TGeoShape
enum	EShapeType { kBitMask32 = 0xffffffff , kGeoNoShape = 0 , kGeoBad = (1ULL << ( 0 )) , kGeoRSeg = (1ULL << ( 1 )) , kGeoPhiSeg = (1ULL << ( 2 )) , kGeoThetaSeg = (1ULL << ( 3 )) , kGeoVisX = (1ULL << ( 4 )) , kGeoVisY = (1ULL << ( 5 )) , kGeoVisZ = (1ULL << ( 6 )) , kGeoRunTimeShape = (1ULL << ( 7 )) , kGeoInvalidShape = (1ULL << ( 8 )) , kGeoTorus = (1ULL << ( 9 )) , kGeoBox = (1ULL << ( 10 )) , kGeoPara = (1ULL << ( 11 )) , kGeoSph = (1ULL << ( 12 )) , kGeoTube = (1ULL << ( 13 )) , kGeoTubeSeg = (1ULL << ( 14 )) , kGeoCone = (1ULL << ( 15 )) , kGeoConeSeg = (1ULL << ( 16 )) , kGeoPcon = (1ULL << ( 17 )) , kGeoPgon = (1ULL << ( 18 )) , kGeoArb8 = (1ULL << ( 19 )) , kGeoEltu = (1ULL << ( 20 )) , kGeoTrap = (1ULL << ( 21 )) , kGeoCtub = (1ULL << ( 22 )) , kGeoTrd1 = (1ULL << ( 23 )) , kGeoTrd2 = (1ULL << ( 24 )) , kGeoComb = (1ULL << ( 25 )) , kGeoClosedShape = (1ULL << ( 26 )) , kGeoXtru = (1ULL << ( 27 )) , kGeoParaboloid = (1ULL << ( 28 )) , kGeoHalfSpace = (1ULL << ( 29 )) , kGeoHype = (1ULL << ( 30 )) , kGeoSavePrimitive = (1ULL << ( 20 )) }

Public Types inherited from TObject
enum	{ kIsOnHeap = 0x01000000 , kNotDeleted = 0x02000000 , kZombie = 0x04000000 , kInconsistent = 0x08000000 , kBitMask = 0x00ffffff }

enum	{ kSingleKey = (1ULL << ( 0 )) , kOverwrite = (1ULL << ( 1 )) , kWriteDelete = (1ULL << ( 2 )) }

enum	EDeprecatedStatusBits { kObjInCanvas = (1ULL << ( 3 )) }

enum	EStatusBits { kCanDelete = (1ULL << ( 0 )) , kMustCleanup = (1ULL << ( 3 )) , kIsReferenced = (1ULL << ( 4 )) , kHasUUID = (1ULL << ( 5 )) , kCannotPick = (1ULL << ( 6 )) , kNoContextMenu = (1ULL << ( 8 )) , kInvalidObject = (1ULL << ( 13 )) }

Protected Types inherited from TObject
enum	{ kOnlyPrepStep = (1ULL << ( 3 )) }

#include <TGeoTube.h>

Inheritance diagram for TGeoTubeSeg:

[legend]

Constructor & Destructor Documentation

◆ TGeoTubeSeg() [1/4]

TGeoTubeSeg::TGeoTubeSeg ( )

Default constructor.

Definition at line 1247 of file TGeoTube.cxx.

◆ TGeoTubeSeg() [2/4]

TGeoTubeSeg::TGeoTubeSeg	(	Double_t	rmin,
		Double_t	rmax,
		Double_t	dz,
		Double_t	phiStart,
		Double_t	phiEnd
	)

Default constructor specifying minimum and maximum radius.

The segment will be from phiStart to phiEnd expressed in degree.

Definition at line 1258 of file TGeoTube.cxx.

◆ TGeoTubeSeg() [3/4]

TGeoTubeSeg::TGeoTubeSeg	(	const char *	name,
		Double_t	rmin,
		Double_t	rmax,
		Double_t	dz,
		Double_t	phi1,
		Double_t	phi2
	)

Default constructor specifying minimum and maximum radius The segment will be from phiStart to phiEnd expressed in degree.

Definition at line 1272 of file TGeoTube.cxx.

◆ TGeoTubeSeg() [4/4]

TGeoTubeSeg::TGeoTubeSeg ( Double_t * param )

Default constructor specifying minimum and maximum radius.

param[0] = Rmin
param[1] = Rmax
param[2] = dz
param[3] = phi1
param[4] = phi2

Definition at line 1289 of file TGeoTube.cxx.

◆ ~TGeoTubeSeg()

TGeoTubeSeg::~TGeoTubeSeg ( )

virtual

destructor

Definition at line 1300 of file TGeoTube.cxx.

Member Function Documentation

◆ AfterStreamer()

void TGeoTubeSeg::AfterStreamer ( )

virtual

Function called after streaming an object of this class.

Reimplemented from TGeoShape.

Definition at line 1307 of file TGeoTube.cxx.

◆ Capacity() [1/2]

Double_t TGeoTubeSeg::Capacity ( ) const

virtual

Computes capacity of the shape in [length^3].

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1333 of file TGeoTube.cxx.

◆ Capacity() [2/2]

Double_t TGeoTubeSeg::Capacity	(	Double_t	rmin,
		Double_t	rmax,
		Double_t	dz,
		Double_t	phi1,
		Double_t	phi2
	)

static

Computes capacity of the shape in [length^3].

Definition at line 1341 of file TGeoTube.cxx.

◆ Class()

static TClass * TGeoTubeSeg::Class ( )

static

Returns: TClass describing this class

◆ Class_Name()

static const char * TGeoTubeSeg::Class_Name ( )

static

Returns: Name of this class

◆ Class_Version()

static constexpr Version_t TGeoTubeSeg::Class_Version ( )

inlinestaticconstexpr

Returns: Version of this class

Definition at line 168 of file TGeoTube.h.

◆ ComputeBBox()

void TGeoTubeSeg::ComputeBBox ( )

virtual

compute bounding box of the tube segment

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1350 of file TGeoTube.cxx.

◆ ComputeNormal()

void TGeoTubeSeg::ComputeNormal	(	const Double_t *	point,
		const Double_t *	dir,
		Double_t *	norm
	)

virtual

Compute normal to closest surface from POINT.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1397 of file TGeoTube.cxx.

◆ ComputeNormal_v()

void TGeoTubeSeg::ComputeNormal_v	(	const Double_t *	points,
		const Double_t *	dirs,
		Double_t *	norms,
		Int_t	vecsize
	)

virtual

Compute the normal for an array o points so that norm.dot.dir is positive Input: Arrays of point coordinates and directions + vector size Output: Array of normal directions.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2444 of file TGeoTube.cxx.

◆ ComputeNormalS()

void TGeoTubeSeg::ComputeNormalS	(	const Double_t *	point,
		const Double_t *	dir,
		Double_t *	norm,
		Double_t	rmin,
		Double_t	rmax,
		Double_t	dz,
		Double_t	c1,
		Double_t	s1,
		Double_t	c2,
		Double_t	s2
	)

static

Compute normal to closest surface from POINT.

Definition at line 1428 of file TGeoTube.cxx.

◆ Contains()

Bool_t TGeoTubeSeg::Contains ( const Double_t * point ) const

virtual

test if point is inside this tube segment first check if point is inside the tube

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1456 of file TGeoTube.cxx.

◆ Contains_v()

void TGeoTubeSeg::Contains_v	(	const Double_t *	points,
		Bool_t *	inside,
		Int_t	vecsize
	)		const

virtual

Check the inside status for each of the points in the array.

Input: Array of point coordinates + vector size Output: Array of Booleans for the inside of each point

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2434 of file TGeoTube.cxx.

◆ DeclFileName()

static const char * TGeoTubeSeg::DeclFileName ( )

inlinestatic

Returns: Name of the file containing the class declaration

Definition at line 168 of file TGeoTube.h.

◆ DistancetoPrimitive()

Int_t TGeoTubeSeg::DistancetoPrimitive	(	Int_t	px,
		Int_t	py
	)

virtual

compute closest distance from point px,py to each corner

Reimplemented from TGeoTube.

Definition at line 1465 of file TGeoTube.cxx.

◆ DistFromInside()

Double_t TGeoTubeSeg::DistFromInside	(	const Double_t *	point,
		const Double_t *	dir,
		Int_t	iact = `1`,
		Double_t	step = `TGeoShape::Big()`,
		Double_t *	safe = `nullptr`
	)		const

virtual

Compute distance from inside point to surface of the tube segment Boundary safe algorithm.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1524 of file TGeoTube.cxx.

◆ DistFromInside_v()

void TGeoTubeSeg::DistFromInside_v	(	const Double_t *	points,
		const Double_t *	dirs,
		Double_t *	dists,
		Int_t	vecsize,
		Double_t *	step
	)		const

virtual

Compute distance from array of input points having directions specified by dirs. Store output in dists.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2452 of file TGeoTube.cxx.

◆ DistFromInsideS()

Double_t TGeoTubeSeg::DistFromInsideS	(	const Double_t *	point,
		const Double_t *	dir,
		Double_t	rmin,
		Double_t	rmax,
		Double_t	dz,
		Double_t	c1,
		Double_t	s1,
		Double_t	c2,
		Double_t	s2,
		Double_t	cm,
		Double_t	sm,
		Double_t	cdfi
	)

static

Compute distance from inside point to surface of the tube segment (static) Boundary safe algorithm.

Do Z

Definition at line 1477 of file TGeoTube.cxx.

◆ DistFromOutside()

Double_t TGeoTubeSeg::DistFromOutside	(	const Double_t *	point,
		const Double_t *	dir,
		Int_t	iact = `1`,
		Double_t	step = `TGeoShape::Big()`,
		Double_t *	safe = `nullptr`
	)		const

virtual

compute distance from outside point to surface of the tube segment fist localize point w.r.t tube

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1796 of file TGeoTube.cxx.

◆ DistFromOutside_v()

void TGeoTubeSeg::DistFromOutside_v	(	const Double_t *	points,
		const Double_t *	dirs,
		Double_t *	dists,
		Int_t	vecsize,
		Double_t *	step
	)		const

virtual

Compute distance from array of input points having directions specified by dirs. Store output in dists.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2460 of file TGeoTube.cxx.

◆ DistFromOutsideS()

Double_t TGeoTubeSeg::DistFromOutsideS	(	const Double_t *	point,
		const Double_t *	dir,
		Double_t	rmin,
		Double_t	rmax,
		Double_t	dz,
		Double_t	c1,
		Double_t	s1,
		Double_t	c2,
		Double_t	s2,
		Double_t	cm,
		Double_t	sm,
		Double_t	cdfi
	)

static

Static method to compute distance to arbitrary tube segment from outside point Boundary safe algorithm.

Definition at line 1541 of file TGeoTube.cxx.

◆ Divide()

TGeoVolume * TGeoTubeSeg::Divide	(	TGeoVolume *	voldiv,
		const char *	divname,
		Int_t	iaxis,
		Int_t	ndiv,
		Double_t	start,
		Double_t	step
	)

virtual

Divide this tube segment shape belonging to volume "voldiv" into ndiv volumes called divname, from start position with the given step.

Returns pointer to created division cell volume in case of Z divisions. For radialdivision creates all volumes with different shapes and returns pointer to volume that was divided. In case a wrong division axis is supplied, returns pointer to volume that was divided.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1820 of file TGeoTube.cxx.

◆ GetAxisRange()

Double_t TGeoTubeSeg::GetAxisRange	(	Int_t	iaxis,
		Double_t &	xlo,
		Double_t &	xhi
	)		const

virtual

Get range of shape for a given axis.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1886 of file TGeoTube.cxx.

◆ GetBoundingCylinder()

void TGeoTubeSeg::GetBoundingCylinder ( Double_t * param ) const

virtual

Fill vector param[4] with the bounding cylinder parameters.

The order is the following : Rmin, Rmax, Phi1, Phi2

Reimplemented from TGeoTube.

Definition at line 1915 of file TGeoTube.cxx.

◆ GetBuffer3D()

const TBuffer3D & TGeoTubeSeg::GetBuffer3D	(	Int_t	reqSections,
		Bool_t	localFrame
	)		const

virtual

Fills a static 3D buffer and returns a reference.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2394 of file TGeoTube.cxx.

◆ GetByteCount()

virtual Int_t TGeoTubeSeg::GetByteCount ( ) const

inlinevirtual

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 146 of file TGeoTube.h.

◆ GetMakeRuntimeShape()

TGeoShape * TGeoTubeSeg::GetMakeRuntimeShape	(	TGeoShape *	mother,
		TGeoMatrix *	mat
	)		const

virtual

in case shape has some negative parameters, these has to be computed in order to fit the mother

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1929 of file TGeoTube.cxx.

◆ GetMeshNumbers()

void TGeoTubeSeg::GetMeshNumbers	(	Int_t &	nvert,
		Int_t &	nsegs,
		Int_t &	npols
	)		const

virtual

Returns numbers of vertices, segments and polygons composing the shape mesh.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2366 of file TGeoTube.cxx.

◆ GetNmeshVertices()

Int_t TGeoTubeSeg::GetNmeshVertices ( ) const

virtual

Return number of vertices of the mesh representation.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2377 of file TGeoTube.cxx.

◆ GetPhi1()

Double_t TGeoTubeSeg::GetPhi1 ( ) const

inline

Definition at line 151 of file TGeoTube.h.

◆ GetPhi2()

Double_t TGeoTubeSeg::GetPhi2 ( ) const

inline

Definition at line 152 of file TGeoTube.h.

◆ GetPointsOnSegments()

Bool_t TGeoTubeSeg::GetPointsOnSegments	(	Int_t	npoints,
		Double_t *	array
	)		const

virtual

Fills array with n random points located on the line segments of the shape mesh.

The output array must be provided with a length of minimum 3*npoints. Returns true if operation is implemented.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2243 of file TGeoTube.cxx.

◆ InitTrigonometry()

void TGeoTubeSeg::InitTrigonometry ( )

protected

Init frequently used trigonometric values.

Definition at line 1315 of file TGeoTube.cxx.

◆ InspectShape()

void TGeoTubeSeg::InspectShape ( ) const

virtual

print shape parameters

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 1952 of file TGeoTube.cxx.

◆ IsA()

virtual TClass * TGeoTubeSeg::IsA ( ) const

inlinevirtual

Returns: TClass describing current object

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 168 of file TGeoTube.h.

◆ MakeBuffer3D()

TBuffer3D * TGeoTubeSeg::MakeBuffer3D ( ) const

virtual

Creates a TBuffer3D describing this shape.

Coordinates are in local reference frame.

Reimplemented from TGeoTube.

Definition at line 1968 of file TGeoTube.cxx.

◆ Safety()

Double_t TGeoTubeSeg::Safety	(	const Double_t *	point,
		Bool_t	in = `kTRUE`
	)		const

virtual

computes the closest distance from given point InitTrigonometry();to this shape, according to option.

The matching point on the shape is stored in spoint.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2074 of file TGeoTube.cxx.

◆ Safety_v()

void TGeoTubeSeg::Safety_v	(	const Double_t *	points,
		const Bool_t *	inside,
		Double_t *	safe,
		Int_t	vecsize
	)		const

virtual

Compute safe distance from each of the points in the input array.

Input: Array of point coordinates, array of statuses for these points, size of the arrays Output: Safety values

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2470 of file TGeoTube.cxx.

◆ SafetyS()

Double_t TGeoTubeSeg::SafetyS	(	const Double_t *	point,
		Bool_t	in,
		Double_t	rmin,
		Double_t	rmax,
		Double_t	dz,
		Double_t	phi1,
		Double_t	phi2,
		Int_t	skipz = `0`
	)

static

Static method to compute the closest distance from given point to this shape.

Definition at line 2120 of file TGeoTube.cxx.

◆ SavePrimitive()

void TGeoTubeSeg::SavePrimitive	(	std::ostream &	out,
		Option_t *	option = `""`
	)

virtual

Save a primitive as a C++ statement(s) on output stream "out".

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2194 of file TGeoTube.cxx.

◆ SetDimensions()

void TGeoTubeSeg::SetDimensions ( Double_t * param )

virtual

Set dimensions of the tube segment starting from a list.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2228 of file TGeoTube.cxx.

◆ SetPoints() [1/2]

void TGeoTubeSeg::SetPoints ( Double_t * points ) const

virtual

Create tube segment mesh points.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2282 of file TGeoTube.cxx.

◆ SetPoints() [2/2]

void TGeoTubeSeg::SetPoints ( Float_t * points ) const

virtual

Create tube segment mesh points.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

Definition at line 2324 of file TGeoTube.cxx.

◆ SetSegsAndPols()

void TGeoTubeSeg::SetSegsAndPols ( TBuffer3D & buff ) const

virtual

Fill TBuffer3D structure for segments and polygons.

Reimplemented from TGeoTube.

Definition at line 1989 of file TGeoTube.cxx.

◆ SetTubsDimensions()

void TGeoTubeSeg::SetTubsDimensions	(	Double_t	rmin,
		Double_t	rmax,
		Double_t	dz,
		Double_t	phiStart,
		Double_t	phiEnd
	)

Set dimensions of the tube segment.

The segment will be from phiStart to phiEnd expressed in degree.

Definition at line 2211 of file TGeoTube.cxx.

◆ Sizeof3D()

void TGeoTubeSeg::Sizeof3D ( ) const

virtual

fill size of this 3-D object

Reimplemented from TGeoTube.

Definition at line 2387 of file TGeoTube.cxx.

◆ Streamer()

virtual void TGeoTubeSeg::Streamer ( TBuffer & R__b )

virtual

Stream an object of class TObject.

Reimplemented from TGeoTube.

Reimplemented in TGeoCtub.

◆ StreamerNVirtual()

void TGeoTubeSeg::StreamerNVirtual ( TBuffer & ClassDef_StreamerNVirtual_b )

inline

Definition at line 168 of file TGeoTube.h.

Member Data Documentation

◆ fC1

Double_t TGeoTubeSeg::fC1

protected

Definition at line 99 of file TGeoTube.h.

◆ fC2

Double_t TGeoTubeSeg::fC2

protected

Definition at line 101 of file TGeoTube.h.

◆ fCdfi

Double_t TGeoTubeSeg::fCdfi

protected

Definition at line 104 of file TGeoTube.h.

◆ fCm

Double_t TGeoTubeSeg::fCm

protected

Definition at line 103 of file TGeoTube.h.

◆ fPhi1

Double_t TGeoTubeSeg::fPhi1

protected

Definition at line 95 of file TGeoTube.h.

◆ fPhi2

Double_t TGeoTubeSeg::fPhi2

protected

Definition at line 96 of file TGeoTube.h.

◆ fS1

Double_t TGeoTubeSeg::fS1

protected

Definition at line 98 of file TGeoTube.h.

◆ fS2

Double_t TGeoTubeSeg::fS2

protected

Definition at line 100 of file TGeoTube.h.

◆ fSm

Double_t TGeoTubeSeg::fSm

protected

Definition at line 102 of file TGeoTube.h.

Libraries for TGeoTubeSeg:

[legend]

The documentation for this class was generated from the following files:

geom/geom/inc/TGeoTube.h
geom/geom/src/TGeoTube.cxx

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Constructor & Destructor Documentation

◆ TGeoTubeSeg() [1/4]

◆ TGeoTubeSeg() [2/4]

◆ TGeoTubeSeg() [3/4]

◆ TGeoTubeSeg() [4/4]

◆ ~TGeoTubeSeg()

Member Function Documentation

◆ AfterStreamer()

◆ Capacity() [1/2]

◆ Capacity() [2/2]

◆ Class()

◆ Class_Name()

◆ Class_Version()

◆ ComputeBBox()

◆ ComputeNormal()

◆ ComputeNormal_v()

◆ ComputeNormalS()

◆ Contains()

◆ Contains_v()

◆ DeclFileName()

◆ DistancetoPrimitive()

◆ DistFromInside()

◆ DistFromInside_v()

◆ DistFromInsideS()

◆ DistFromOutside()

◆ DistFromOutside_v()

◆ DistFromOutsideS()

◆ Divide()

◆ GetAxisRange()

◆ GetBoundingCylinder()

◆ GetBuffer3D()

◆ GetByteCount()

◆ GetMakeRuntimeShape()

◆ GetMeshNumbers()

◆ GetNmeshVertices()

◆ GetPhi1()

◆ GetPhi2()

◆ GetPointsOnSegments()

◆ InitTrigonometry()

◆ InspectShape()

◆ IsA()

◆ MakeBuffer3D()

◆ Safety()

◆ Safety_v()

◆ SafetyS()

◆ SavePrimitive()

◆ SetDimensions()

◆ SetPoints() [1/2]

◆ SetPoints() [2/2]

◆ SetSegsAndPols()

◆ SetTubsDimensions()

◆ Sizeof3D()

◆ Streamer()

◆ StreamerNVirtual()

Member Data Documentation

◆ fC1

◆ fC2

◆ fCdfi

◆ fCm

◆ fPhi1

◆ fPhi2

◆ fS1

◆ fS2

◆ fSm