 |
ROOT 6.14/05 Reference Guide |
| |
ROOT 6.14/05 Reference Guide |
Profile2D histograms are used to display the mean value of Z and its RMS for each cell in X,Y.
Profile2D histograms are in many cases an elegant replacement of three-dimensional histograms : the inter-relation of three measured quantities X, Y and Z can always be visualized by a three-dimensional histogram or scatter-plot; its representation on the line-printer is not particularly satisfactory, except for sparse data. If Z is an unknown (but single-valued) approximate function of X,Y this function is displayed by a profile2D histogram with much better precision than by a scatter-plot.
The following formulae show the cumulated contents (capital letters) and the values displayed by the printing or plotting routines (small letters) of the elements for cell I, J.
H(I,J) = sum Z E(I,J) = sum Z l(I,J) = sum l L(I,J) = sum l h(I,J) = H(I,J)/L(I,J) s(I,J) = sqrt(E(I,J)/L(I,J)- h(I,J)**2) e(I,J) = s(I,J)/sqrt(L(I,J))
In the special case where s(I,J) is zero (eg, case of 1 entry only in one cell) the bin error e(I,J) is computed from the average of the s(I,J) for all cells if the static function TProfile2D::Approximate has been called. This simple/crude approximation was suggested in order to keep the cell during a fit operation. But note that this approximation is not the default behaviour.
Example of a profile2D histogram
Definition at line 27 of file TProfile2D.h.
Public Member Functions | |
| TProfile2D () | |
| Default constructor for Profile2D histograms. More... | |
| TProfile2D (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Int_t nbinsy, Double_t ylow, Double_t yup, Double_t zlow, Double_t zup, Option_t *option="") | |
| Constructor for Profile2D histograms with range in z. More... | |
| TProfile2D (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Int_t nbinsy, Double_t ylow, Double_t yup, Option_t *option="") | |
| Normal Constructor for Profile histograms. More... | |
| TProfile2D (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Int_t nbinsy, Double_t ylow, Double_t yup, Option_t *option="") | |
| Create a 2-D Profile with variable bins in X and fix bins in Y. More... | |
| TProfile2D (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Int_t nbinsy, const Double_t *ybins, Option_t *option="") | |
| Create a 2-D Profile with fix bins in X and variable bins in Y. More... | |
| TProfile2D (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Int_t nbinsy, const Double_t *ybins, Option_t *option="") | |
| Create a 2-D Profile with variable bins in X and variable bins in Y. More... | |
| TProfile2D (const TProfile2D &profile) | |
| Copy constructor. More... | |
| virtual | ~TProfile2D () |
| Default destructor for Profile2D histograms. More... | |
| virtual Bool_t | Add (TF1 *h1, Double_t c1=1, Option_t *option="") |
Performs the operation: this = this + c1*f1 . More... | |
| virtual Bool_t | Add (const TH1 *h1, Double_t c1=1) |
Performs the operation: this = this + c1*h1 . More... | |
| virtual Bool_t | Add (const TH1 *h1, const TH1 *h2, Double_t c1=1, Double_t c2=1) |
| Replace contents of this profile2D by the addition of h1 and h2. More... | |
| virtual Int_t | BufferEmpty (Int_t action=0) |
| Fill histogram with all entries in the buffer. More... | |
| void | BuildOptions (Double_t zmin, Double_t zmax, Option_t *option) |
| Set Profile2D histogram structure and options. More... | |
| virtual void | Copy (TObject &hnew) const |
| Copy a Profile2D histogram to a new profile2D histogram. More... | |
| virtual Bool_t | Divide (TF1 *h1, Double_t c1=1) |
Performs the operation: this = this/(c1*f1) . More... | |
| virtual Bool_t | Divide (const TH1 *h1) |
| Divide this profile2D by h1. More... | |
| virtual Bool_t | Divide (const TH1 *h1, const TH1 *h2, Double_t c1=1, Double_t c2=1, Option_t *option="") |
| Replace contents of this profile2D by the division of h1 by h2. More... | |
| virtual void | ExtendAxis (Double_t x, TAxis *axis) |
| Profile histogram is resized along axis such that x is in the axis range. More... | |
| Int_t | Fill (Double_t x, Double_t y, Double_t z) |
| Fill a Profile2D histogram (no weights). More... | |
| virtual Int_t | Fill (Double_t x, const char *namey, Double_t z) |
| Fill a Profile2D histogram (no weights). More... | |
| virtual Int_t | Fill (const char *namex, Double_t y, Double_t z) |
| Fill a Profile2D histogram (no weights). More... | |
| virtual Int_t | Fill (const char *namex, const char *namey, Double_t z) |
| Fill a Profile2D histogram (no weights). More... | |
| virtual Int_t | Fill (Double_t x, Double_t y, Double_t z, Double_t w) |
| Fill a Profile2D histogram with weights. More... | |
| virtual Double_t | GetBinContent (Int_t bin) const |
| Return bin content of a Profile2D histogram. More... | |
| virtual Double_t | GetBinContent (Int_t binx, Int_t biny) const |
| virtual Double_t | GetBinContent (Int_t binx, Int_t biny, Int_t) const |
| virtual Double_t | GetBinEffectiveEntries (Int_t bin) |
| Return bin effective entries for a weighted filled Profile histogram. More... | |
| virtual Double_t | GetBinEntries (Int_t bin) const |
| Return bin entries of a Profile2D histogram. More... | |
| virtual Double_t | GetBinError (Int_t bin) const |
| Return bin error of a Profile2D histogram. More... | |
| virtual Double_t | GetBinError (Int_t binx, Int_t biny) const |
| virtual Double_t | GetBinError (Int_t binx, Int_t biny, Int_t) const |
| virtual TArrayD * | GetBinSumw2 () |
| virtual const TArrayD * | GetBinSumw2 () const |
| Option_t * | GetErrorOption () const |
| Return option to compute profile2D errors. More... | |
| Double_t | GetNumberOfBins () |
| virtual void | GetStats (Double_t *stats) const |
| Fill the array stats from the contents of this profile. More... | |
| virtual Double_t | GetZmax () const |
| virtual Double_t | GetZmin () const |
| virtual void | LabelsDeflate (Option_t *axis="X") |
| Reduce the number of bins for this axis to the number of bins having a label. More... | |
| virtual void | LabelsInflate (Option_t *axis="X") |
| Double the number of bins for axis. More... | |
| virtual void | LabelsOption (Option_t *option="h", Option_t *axis="X") |
| Set option(s) to draw axis with labels. More... | |
| virtual Long64_t | Merge (TCollection *list) |
| Merge all histograms in the collection in this histogram. More... | |
| virtual Bool_t | Multiply (TF1 *h1, Double_t c1=1) |
| Performs the operation: this = this*c1*f1. More... | |
| virtual Bool_t | Multiply (const TH1 *h1) |
| Multiply this profile2D by h1. More... | |
| virtual Bool_t | Multiply (const TH1 *h1, const TH1 *h2, Double_t c1=1, Double_t c2=1, Option_t *option="") |
| Replace contents of this profile2D by multiplication of h1 by h2. More... | |
| TProfile * | ProfileX (const char *name="_pfx", Int_t firstybin=0, Int_t lastybin=-1, Option_t *option="") const |
| Project a 2-D histogram into a profile histogram along X. More... | |
| TProfile * | ProfileY (const char *name="_pfy", Int_t firstxbin=0, Int_t lastxbin=-1, Option_t *option="") const |
| Project a 2-D histogram into a profile histogram along X. More... | |
| TH2D * | ProjectionXY (const char *name="_pxy", Option_t *option="e") const |
| Project this profile2D into a 2-D histogram along X,Y. More... | |
| virtual void | PutStats (Double_t *stats) |
| Replace current statistics with the values in array stats. More... | |
| virtual TProfile2D * | Rebin2D (Int_t nxgroup=2, Int_t nygroup=2, const char *newname="") |
| Rebin this histogram grouping nxgroup/nygroup bins along the xaxis/yaxis together. More... | |
| virtual TProfile2D * | RebinX (Int_t ngroup=2, const char *newname="") |
| Rebin only the X axis. More... | |
| virtual TProfile2D * | RebinY (Int_t ngroup=2, const char *newname="") |
| Rebin only the Y axis. More... | |
| virtual void | Reset (Option_t *option="") |
| Reset contents of a Profile2D histogram. More... | |
| virtual void | SavePrimitive (std::ostream &out, Option_t *option="") |
| Save primitive as a C++ statement(s) on output stream out. More... | |
| virtual void | Scale (Double_t c1=1, Option_t *option="") |
| Multiply this profile2D by a constant c1. More... | |
| virtual void | SetBinEntries (Int_t bin, Double_t w) |
| Set the number of entries in bin. More... | |
| virtual void | SetBins (Int_t nbinsx, Double_t xmin, Double_t xmax, Int_t nbinsy, Double_t ymin, Double_t ymax) |
| Redefine x and y axis parameters. More... | |
| virtual void | SetBins (Int_t nx, const Double_t *xBins, Int_t ny, const Double_t *yBins) |
| Redefine x and y axis parameters for variable bin sizes. More... | |
| virtual void | SetBinsLength (Int_t n=-1) |
| Set total number of bins including under/overflow. More... | |
| virtual void | SetBuffer (Int_t buffersize, Option_t *option="") |
| Set the buffer size in units of 8 bytes (double). More... | |
| virtual void | SetErrorOption (Option_t *option="") |
| Set option to compute profile2D errors. More... | |
| virtual void | Sumw2 (Bool_t flag=kTRUE) |
| Create/Delete structure to store sum of squares of weights per bin. More... | |
 Public Member Functions inherited from TH2D | |
| TH2D () | |
| Constructor. More... | |
| TH2D (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Int_t nbinsy, Double_t ylow, Double_t yup) | |
| Constructor. More... | |
| TH2D (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Int_t nbinsy, Double_t ylow, Double_t yup) | |
| Constructor. More... | |
| TH2D (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Int_t nbinsy, const Double_t *ybins) | |
| Constructor. More... | |
| TH2D (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Int_t nbinsy, const Double_t *ybins) | |
| Constructor. More... | |
| TH2D (const char *name, const char *title, Int_t nbinsx, const Float_t *xbins, Int_t nbinsy, const Float_t *ybins) | |
| Constructor. More... | |
| TH2D (const TMatrixDBase &m) | |
| Constructor. More... | |
| TH2D (const TH2D &h2d) | |
| Copy constructor. More... | |
| virtual | ~TH2D () |
| Destructor. More... | |
| virtual void | AddBinContent (Int_t bin) |
| Increment bin content by 1. More... | |
| virtual void | AddBinContent (Int_t bin, Double_t w) |
| Increment bin content by a weight w. More... | |
| TH2D & | operator= (const TH2D &h1) |
| Operator =. More... | |
| Public Member Functions inherited from TH2 | |
| virtual | ~TH2 () |
| Destructor. More... | |
| virtual void | FillN (Int_t, const Double_t *, const Double_t *, Int_t) |
| Fill this histogram with an array x and weights w. More... | |
| virtual void | FillN (Int_t ntimes, const Double_t *x, const Double_t *y, const Double_t *w, Int_t stride=1) |
| Fill a 2-D histogram with an array of values and weights. More... | |
| virtual void | FillRandom (const char *fname, Int_t ntimes=5000) |
| Fill histogram following distribution in function fname. More... | |
| virtual void | FillRandom (TH1 *h, Int_t ntimes=5000) |
| Fill histogram following distribution in histogram h. More... | |
| virtual Int_t | FindFirstBinAbove (Double_t threshold=0, Int_t axis=1) const |
| Find first bin with content > threshold for axis (1=x, 2=y, 3=z) if no bins with content > threshold is found the function returns -1. More... | |
| virtual Int_t | FindLastBinAbove (Double_t threshold=0, Int_t axis=1) const |
| Find last bin with content > threshold for axis (1=x, 2=y, 3=z) if no bins with content > threshold is found the function returns -1. More... | |
| virtual void | FitSlicesX (TF1 *f1=0, Int_t firstybin=0, Int_t lastybin=-1, Int_t cut=0, Option_t *option="QNR", TObjArray *arr=0) |
| Project slices along X in case of a 2-D histogram, then fit each slice with function f1 and make a histogram for each fit parameter Only bins along Y between firstybin and lastybin are considered. More... | |
| virtual void | FitSlicesY (TF1 *f1=0, Int_t firstxbin=0, Int_t lastxbin=-1, Int_t cut=0, Option_t *option="QNR", TObjArray *arr=0) |
| Project slices along Y in case of a 2-D histogram, then fit each slice with function f1 and make a histogram for each fit parameter Only bins along X between firstxbin and lastxbin are considered. More... | |
| virtual Int_t | GetBin (Int_t binx, Int_t biny, Int_t binz=0) const |
| Return Global bin number corresponding to binx,y,z. More... | |
| virtual Double_t | GetBinErrorLow (Int_t binx, Int_t biny) |
| virtual Double_t | GetBinErrorUp (Int_t binx, Int_t biny) |
| virtual Double_t | GetBinWithContent2 (Double_t c, Int_t &binx, Int_t &biny, Int_t firstxbin=1, Int_t lastxbin=-1, Int_t firstybin=1, Int_t lastybin=-1, Double_t maxdiff=0) const |
| compute first cell (binx,biny) in the range [firstxbin,lastxbin][firstybin,lastybin] for which diff = abs(cell_content-c) <= maxdiff In case several cells in the specified range with diff=0 are found the first cell found is returned in binx,biny. More... | |
| virtual Double_t | GetCorrelationFactor (Int_t axis1=1, Int_t axis2=2) const |
| Return correlation factor between axis1 and axis2. More... | |
| virtual Double_t | GetCovariance (Int_t axis1=1, Int_t axis2=2) const |
| Return covariance between axis1 and axis2. More... | |
| virtual void | GetRandom2 (Double_t &x, Double_t &y) |
| Return 2 random numbers along axis x and y distributed according the cell-contents of a 2-dim histogram return a NaN if the histogram has a bin with negative content. More... | |
| virtual Double_t | Integral (Option_t *option="") const |
| Return integral of bin contents. More... | |
| virtual Double_t | Integral (Int_t binx1, Int_t binx2, Int_t biny1, Int_t biny2, Option_t *option="") const |
| Return integral of bin contents in range [firstxbin,lastxbin],[firstybin,lastybin] for a 2-D histogram By default the integral is computed as the sum of bin contents in the range. More... | |
| virtual Double_t | Integral (Int_t, Int_t, Int_t, Int_t, Int_t, Int_t, Option_t *="") const |
| virtual Double_t | IntegralAndError (Int_t binx1, Int_t binx2, Int_t biny1, Int_t biny2, Double_t &err, Option_t *option="") const |
| Return integral of bin contents in range [firstxbin,lastxbin],[firstybin,lastybin] for a 2-D histogram. More... | |
| virtual Double_t | Interpolate (Double_t x) |
| illegal for a TH2 More... | |
| virtual Double_t | Interpolate (Double_t x, Double_t y) |
| Given a point P(x,y), Interpolate approximates the value via bilinear interpolation based on the four nearest bin centers see Wikipedia, Bilinear Interpolation Andy Mastbaum 10/8/2008 vaguely based on R.Raja 6-Sep-2008. More... | |
| virtual Double_t | Interpolate (Double_t x, Double_t y, Double_t z) |
| illegal for a TH2 More... | |
| virtual Double_t | KolmogorovTest (const TH1 *h2, Option_t *option="") const |
| Statistical test of compatibility in shape between THIS histogram and h2, using Kolmogorov test. More... | |
| TProfile * | ProfileX (const char *name="_pfx", Int_t firstybin=1, Int_t lastybin=-1, Option_t *option="") const |
| Project a 2-D histogram into a profile histogram along X. More... | |
| TProfile * | ProfileY (const char *name="_pfy", Int_t firstxbin=1, Int_t lastxbin=-1, Option_t *option="") const |
| Project a 2-D histogram into a profile histogram along Y. More... | |
| TH1D * | ProjectionX (const char *name="_px", Int_t firstybin=0, Int_t lastybin=-1, Option_t *option="") const |
| Project a 2-D histogram into a 1-D histogram along X. More... | |
| TH1D * | ProjectionY (const char *name="_py", Int_t firstxbin=0, Int_t lastxbin=-1, Option_t *option="") const |
| Project a 2-D histogram into a 1-D histogram along Y. More... | |
| TH1D * | QuantilesX (Double_t prob=0.5, const char *name="_qx") const |
| Compute the X distribution of quantiles in the other variable Y name is the name of the returned histogram prob is the probability content for the quantile (0.5 is the default for the median) An approximate error for the quantile is computed assuming that the distribution in the other variable is normal. More... | |
| TH1D * | QuantilesY (Double_t prob=0.5, const char *name="_qy") const |
| Compute the Y distribution of quantiles in the other variable X name is the name of the returned histogram prob is the probability content for the quantile (0.5 is the default for the median) An approximate error for the quantile is computed assuming that the distribution in the other variable is normal. More... | |
| virtual TH2 * | Rebin (Int_t ngroup=2, const char *newname="", const Double_t *xbins=0) |
| Override TH1::Rebin as TH2::RebinX Rebinning in variable binning as for TH1 is not allowed If a non-null pointer is given an error is flagged see RebinX and Rebin2D. More... | |
| virtual void | SetBinContent (Int_t bin, Double_t content) |
| Set bin content. More... | |
| virtual void | SetBinContent (Int_t binx, Int_t biny, Double_t content) |
| virtual void | SetBinContent (Int_t binx, Int_t biny, Int_t, Double_t content) |
| virtual void | SetShowProjectionX (Int_t nbins=1) |
| When the mouse is moved in a pad containing a 2-d view of this histogram a second canvas shows the projection along X corresponding to the mouse position along Y. More... | |
| virtual void | SetShowProjectionY (Int_t nbins=1) |
| When the mouse is moved in a pad containing a 2-d view of this histogram a second canvas shows the projection along Y corresponding to the mouse position along X. More... | |
| virtual TH1 * | ShowBackground (Int_t niter=20, Option_t *option="same") |
| This function calculates the background spectrum in this histogram. More... | |
| virtual Int_t | ShowPeaks (Double_t sigma=2, Option_t *option="", Double_t threshold=0.05) |
| Interface to TSpectrum2::Search the function finds peaks in this histogram where the width is > sigma and the peak maximum greater than threshold*maximum bin content of this. More... | |
| virtual void | Smooth (Int_t ntimes=1, Option_t *option="") |
| Smooth bin contents of this 2-d histogram using kernel algorithms similar to the ones used in the raster graphics community. More... | |
| Public Member Functions inherited from TH1 | |
| virtual | ~TH1 () |
| Histogram default destructor. More... | |
| virtual Double_t | AndersonDarlingTest (const TH1 *h2, Option_t *option="") const |
| Statistical test of compatibility in shape between this histogram and h2, using the Anderson-Darling 2 sample test. More... | |
| virtual Double_t | AndersonDarlingTest (const TH1 *h2, Double_t &advalue) const |
| Same function as above but returning also the test statistic value. More... | |
| virtual void | Browse (TBrowser *b) |
| Browse the Histogram object. More... | |
| virtual Bool_t | CanExtendAllAxes () const |
| Returns true if all axes are extendable. More... | |
| virtual Double_t | Chi2Test (const TH1 *h2, Option_t *option="UU", Double_t *res=0) const |
| \( \chi^{2} \) test for comparing weighted and unweighted histograms More... | |
| virtual Double_t | Chi2TestX (const TH1 *h2, Double_t &chi2, Int_t &ndf, Int_t &igood, Option_t *option="UU", Double_t *res=0) const |
| The computation routine of the Chisquare test. More... | |
| virtual Double_t | Chisquare (TF1 *f1, Option_t *option="") const |
| Compute and return the chisquare of this histogram with respect to a function The chisquare is computed by weighting each histogram point by the bin error By default the full range of the histogram is used. More... | |
| virtual void | ClearUnderflowAndOverflow () |
| Remove all the content from the underflow and overflow bins, without changing the number of entries After calling this method, every undeflow and overflow bins will have content 0.0 The Sumw2 is also cleared, since there is no more content in the bins. More... | |
| TObject * | Clone (const char *newname=0) const |
| Make a complete copy of the underlying object. More... | |
| virtual Double_t | ComputeIntegral (Bool_t onlyPositive=false) |
| Compute integral (cumulative sum of bins) The result stored in fIntegral is used by the GetRandom functions. More... | |
| virtual void | DirectoryAutoAdd (TDirectory *) |
| Perform the automatic addition of the histogram to the given directory. More... | |
| virtual Int_t | DistancetoPrimitive (Int_t px, Int_t py) |
| Compute distance from point px,py to a line. More... | |
| virtual void | Draw (Option_t *option="") |
| Draw this histogram with options. More... | |
| virtual TH1 * | DrawCopy (Option_t *option="", const char *name_postfix="_copy") const |
| Copy this histogram and Draw in the current pad. More... | |
| virtual TH1 * | DrawNormalized (Option_t *option="", Double_t norm=1) const |
| Draw a normalized copy of this histogram. More... | |
| virtual void | DrawPanel () |
| Display a panel with all histogram drawing options. More... | |
| virtual void | Eval (TF1 *f1, Option_t *option="") |
| Evaluate function f1 at the center of bins of this histogram. More... | |
| virtual void | ExecuteEvent (Int_t event, Int_t px, Int_t py) |
| Execute action corresponding to one event. More... | |
| virtual TH1 * | FFT (TH1 *h_output, Option_t *option) |
| This function allows to do discrete Fourier transforms of TH1 and TH2. More... | |
| virtual Int_t | FindBin (Double_t x, Double_t y=0, Double_t z=0) |
| Return Global bin number corresponding to x,y,z. More... | |
| virtual Int_t | FindFixBin (Double_t x, Double_t y=0, Double_t z=0) const |
| Return Global bin number corresponding to x,y,z. More... | |
| virtual TObject * | FindObject (const char *name) const |
| Search object named name in the list of functions. More... | |
| virtual TObject * | FindObject (const TObject *obj) const |
| Search object obj in the list of functions. More... | |
| virtual TFitResultPtr | Fit (const char *formula, Option_t *option="", Option_t *goption="", Double_t xmin=0, Double_t xmax=0) |
| Fit histogram with function fname. More... | |
| virtual TFitResultPtr | Fit (TF1 *f1, Option_t *option="", Option_t *goption="", Double_t xmin=0, Double_t xmax=0) |
| Fit histogram with function f1. More... | |
| virtual void | FitPanel () |
| Display a panel with all histogram fit options. More... | |
| TH1 * | GetAsymmetry (TH1 *h2, Double_t c2=1, Double_t dc2=0) |
| Return an histogram containing the asymmetry of this histogram with h2, where the asymmetry is defined as: More... | |
| virtual Color_t | GetAxisColor (Option_t *axis="X") const |
| Return the number of divisions for "axis". More... | |
| virtual Float_t | GetBarOffset () const |
| virtual Float_t | GetBarWidth () const |
| virtual Double_t | GetBinCenter (Int_t bin) const |
| Return bin center for 1D histogram. More... | |
| virtual Double_t | GetBinErrorLow (Int_t bin) const |
| Return lower error associated to bin number bin. More... | |
| virtual EBinErrorOpt | GetBinErrorOption () const |
| virtual Double_t | GetBinErrorUp (Int_t bin) const |
| Return upper error associated to bin number bin. More... | |
| virtual Double_t | GetBinLowEdge (Int_t bin) const |
| Return bin lower edge for 1D histogram. More... | |
| virtual Double_t | GetBinWidth (Int_t bin) const |
| Return bin width for 1D histogram. More... | |
| virtual Double_t | GetBinWithContent (Double_t c, Int_t &binx, Int_t firstx=0, Int_t lastx=0, Double_t maxdiff=0) const |
| Compute first binx in the range [firstx,lastx] for which diff = abs(bin_content-c) <= maxdiff. More... | |
| virtual void | GetBinXYZ (Int_t binglobal, Int_t &binx, Int_t &biny, Int_t &binz) const |
| Return binx, biny, binz corresponding to the global bin number globalbin see TH1::GetBin function above. More... | |
| const Double_t * | GetBuffer () const |
| Int_t | GetBufferLength () const |
| Int_t | GetBufferSize () const |
| virtual Double_t | GetCellContent (Int_t binx, Int_t biny) const |
| virtual Double_t | GetCellError (Int_t binx, Int_t biny) const |
| virtual void | GetCenter (Double_t *center) const |
| Fill array with center of bins for 1D histogram Better to use h1.GetXaxis().GetCenter(center) More... | |
| virtual Int_t | GetContour (Double_t *levels=0) |
| Return contour values into array levels if pointer levels is non zero. More... | |
| virtual Double_t | GetContourLevel (Int_t level) const |
| Return value of contour number level. More... | |
| virtual Double_t | GetContourLevelPad (Int_t level) const |
| Return the value of contour number "level" in Pad coordinates. More... | |
| TH1 * | GetCumulative (Bool_t forward=kTRUE, const char *suffix="_cumulative") const |
| Return a pointer to an histogram containing the cumulative The cumulative can be computed both in the forward (default) or backward direction; the name of the new histogram is constructed from the name of this histogram with the suffix suffix appended. More... | |
| virtual Int_t | GetDimension () const |
| TDirectory * | GetDirectory () const |
| virtual Double_t | GetEffectiveEntries () const |
| Number of effective entries of the histogram. More... | |
| virtual Double_t | GetEntries () const |
| Return the current number of entries. More... | |
| virtual TF1 * | GetFunction (const char *name) const |
| Return pointer to function with name. More... | |
| virtual Double_t * | GetIntegral () |
| Return a pointer to the array of bins integral. More... | |
| virtual Double_t | GetKurtosis (Int_t axis=1) const |
| virtual Color_t | GetLabelColor (Option_t *axis="X") const |
| Return the "axis" label color. More... | |
| virtual Style_t | GetLabelFont (Option_t *axis="X") const |
| Return the "axis" label font. More... | |
| virtual Float_t | GetLabelOffset (Option_t *axis="X") const |
| Return the "axis" label offset. More... | |
| virtual Float_t | GetLabelSize (Option_t *axis="X") const |
| Return the "axis" label size. More... | |
| TList * | GetListOfFunctions () const |
| virtual void | GetLowEdge (Double_t *edge) const |
| Fill array with low edge of bins for 1D histogram Better to use h1.GetXaxis().GetLowEdge(edge) More... | |
| virtual Double_t | GetMaximum (Double_t maxval=FLT_MAX) const |
| Return maximum value smaller than maxval of bins in the range, unless the value has been overridden by TH1::SetMaximum, in which case it returns that value. More... | |
| virtual Int_t | GetMaximumBin () const |
| Return location of bin with maximum value in the range. More... | |
| virtual Int_t | GetMaximumBin (Int_t &locmax, Int_t &locmay, Int_t &locmaz) const |
| Return location of bin with maximum value in the range. More... | |
| virtual Double_t | GetMaximumStored () const |
| virtual Double_t | GetMean (Int_t axis=1) const |
| For axis = 1,2 or 3 returns the mean value of the histogram along X,Y or Z axis. More... | |
| virtual Double_t | GetMeanError (Int_t axis=1) const |
| Return standard error of mean of this histogram along the X axis. More... | |
| virtual Double_t | GetMinimum (Double_t minval=-FLT_MAX) const |
| Return minimum value larger than minval of bins in the range, unless the value has been overridden by TH1::SetMinimum, in which case it returns that value. More... | |
| virtual void | GetMinimumAndMaximum (Double_t &min, Double_t &max) const |
| Retrieve the minimum and maximum values in the histogram. More... | |
| virtual Int_t | GetMinimumBin () const |
| Return location of bin with minimum value in the range. More... | |
| virtual Int_t | GetMinimumBin (Int_t &locmix, Int_t &locmiy, Int_t &locmiz) const |
| Return location of bin with minimum value in the range. More... | |
| virtual Double_t | GetMinimumStored () const |
| virtual Int_t | GetNbinsX () const |
| virtual Int_t | GetNbinsY () const |
| virtual Int_t | GetNbinsZ () const |
| virtual Int_t | GetNcells () const |
| virtual Int_t | GetNdivisions (Option_t *axis="X") const |
| Return the number of divisions for "axis". More... | |
| virtual Double_t | GetNormFactor () const |
| virtual char * | GetObjectInfo (Int_t px, Int_t py) const |
| Redefines TObject::GetObjectInfo. More... | |
| Option_t * | GetOption () const |
| TVirtualHistPainter * | GetPainter (Option_t *option="") |
| Return pointer to painter. More... | |
| virtual Int_t | GetQuantiles (Int_t nprobSum, Double_t *q, const Double_t *probSum=0) |
| Compute Quantiles for this histogram Quantile x_q of a probability distribution Function F is defined as. More... | |
| virtual Double_t | GetRandom () const |
| Return a random number distributed according the histogram bin contents. More... | |
| Double_t | GetRMS (Int_t axis=1) const |
| Double_t | GetRMSError (Int_t axis=1) const |
| virtual Double_t | GetSkewness (Int_t axis=1) const |
| EStatOverflows | GetStatOverflows () const |
| virtual Double_t | GetStdDev (Int_t axis=1) const |
| Returns the Standard Deviation (Sigma). More... | |
| virtual Double_t | GetStdDevError (Int_t axis=1) const |
| Return error of standard deviation estimation for Normal distribution. More... | |
| virtual Double_t | GetSumOfWeights () const |
| Return the sum of weights excluding under/overflows. More... | |
| virtual TArrayD * | GetSumw2 () |
| virtual const TArrayD * | GetSumw2 () const |
| virtual Int_t | GetSumw2N () const |
| virtual Float_t | GetTickLength (Option_t *axis="X") const |
| Return the "axis" tick length. More... | |
| virtual Style_t | GetTitleFont (Option_t *axis="X") const |
| Return the "axis" title font. More... | |
| virtual Float_t | GetTitleOffset (Option_t *axis="X") const |
| Return the "axis" title offset. More... | |
| virtual Float_t | GetTitleSize (Option_t *axis="X") const |
| Return the "axis" title size. More... | |
| TAxis * | GetXaxis () |
| Get the behaviour adopted by the object about the statoverflows. See EStatOverflows for more information. More... | |
| const TAxis * | GetXaxis () const |
| TAxis * | GetYaxis () |
| const TAxis * | GetYaxis () const |
| TAxis * | GetZaxis () |
| const TAxis * | GetZaxis () const |
| virtual Double_t | Integral (Int_t binx1, Int_t binx2, Option_t *option="") const |
| Return integral of bin contents in range [binx1,binx2]. More... | |
| virtual Double_t | IntegralAndError (Int_t binx1, Int_t binx2, Double_t &err, Option_t *option="") const |
| Return integral of bin contents in range [binx1,binx2] and its error. More... | |
| Bool_t | IsBinOverflow (Int_t bin, Int_t axis=0) const |
| Return true if the bin is overflow. More... | |
| Bool_t | IsBinUnderflow (Int_t bin, Int_t axis=0) const |
| Return true if the bin is underflow. More... | |
| virtual void | Paint (Option_t *option="") |
| Control routine to paint any kind of histograms. More... | |
| virtual void | Print (Option_t *option="") const |
| Print some global quantities for this histogram. More... | |
| virtual void | RebinAxis (Double_t x, TAxis *axis) |
| virtual void | Rebuild (Option_t *option="") |
| Using the current bin info, recompute the arrays for contents and errors. More... | |
| virtual void | RecursiveRemove (TObject *obj) |
| Recursively remove object from the list of functions. More... | |
| virtual void | ResetStats () |
| Reset the statistics including the number of entries and replace with values calculates from bin content. More... | |
| virtual void | SetAxisColor (Color_t color=1, Option_t *axis="X") |
| Set color to draw the axis line and tick marks. More... | |
| virtual void | SetAxisRange (Double_t xmin, Double_t xmax, Option_t *axis="X") |
| Set the "axis" range. More... | |
| virtual void | SetBarOffset (Float_t offset=0.25) |
| virtual void | SetBarWidth (Float_t width=0.5) |
| virtual void | SetBinError (Int_t bin, Double_t error) |
| Set the bin Error Note that this resets the bin eror option to be of Normal Type and for the non-empty bin the bin error is set by default to the square root of their content, but in case the user sets explicitly a new bin content (using SetBinContent) he needs to provide also the error, otherwise a default error = 0 is used. More... | |
| virtual void | SetBinError (Int_t binx, Int_t biny, Double_t error) |
| See convention for numbering bins in TH1::GetBin. More... | |
| virtual void | SetBinError (Int_t binx, Int_t biny, Int_t binz, Double_t error) |
| See convention for numbering bins in TH1::GetBin. More... | |
| virtual void | SetBinErrorOption (EBinErrorOpt type) |
| virtual UInt_t | SetCanExtend (UInt_t extendBitMask) |
| Make the histogram axes extendable / not extendable according to the bit mask returns the previous bit mask specifying which axes are extendable. More... | |
| virtual void | SetCellContent (Int_t binx, Int_t biny, Double_t content) |
| virtual void | SetCellError (Int_t binx, Int_t biny, Double_t content) |
| virtual void | SetContent (const Double_t *content) |
| Replace bin contents by the contents of array content. More... | |
| virtual void | SetContour (Int_t nlevels, const Double_t *levels=0) |
| Set the number and values of contour levels. More... | |
| virtual void | SetContourLevel (Int_t level, Double_t value) |
| Set value for one contour level. More... | |
| virtual void | SetDirectory (TDirectory *dir) |
| By default when an histogram is created, it is added to the list of histogram objects in the current directory in memory. More... | |
| virtual void | SetEntries (Double_t n) |
| virtual void | SetError (const Double_t *error) |
| Replace bin errors by values in array error. More... | |
| virtual void | SetLabelColor (Color_t color=1, Option_t *axis="X") |
| Set axis labels color. More... | |
| virtual void | SetLabelFont (Style_t font=62, Option_t *axis="X") |
| Set font number used to draw axis labels. More... | |
| virtual void | SetLabelOffset (Float_t offset=0.005, Option_t *axis="X") |
| Set offset between axis and axis' labels. More... | |
| virtual void | SetLabelSize (Float_t size=0.02, Option_t *axis="X") |
| Set size of axis' labels. More... | |
| virtual void | SetMaximum (Double_t maximum=-1111) |
| virtual void | SetMinimum (Double_t minimum=-1111) |
| virtual void | SetName (const char *name) |
| Change the name of this histogram. More... | |
| virtual void | SetNameTitle (const char *name, const char *title) |
| Change the name and title of this histogram. More... | |
| virtual void | SetNdivisions (Int_t n=510, Option_t *axis="X") |
| Set the number of divisions to draw an axis. More... | |
| virtual void | SetNormFactor (Double_t factor=1) |
| virtual void | SetOption (Option_t *option=" ") |
| void | SetStatOverflows (EStatOverflows statOverflows) |
| virtual void | SetStats (Bool_t stats=kTRUE) |
| Set statistics option on/off. More... | |
| virtual void | SetTickLength (Float_t length=0.02, Option_t *axis="X") |
| Set the axis' tick marks length. More... | |
| virtual void | SetTitle (const char *title) |
| See GetStatOverflows for more information. More... | |
| virtual void | SetTitleFont (Style_t font=62, Option_t *axis="X") |
| Set the axis' title font. More... | |
| virtual void | SetTitleOffset (Float_t offset=1, Option_t *axis="X") |
| Specify a parameter offset to control the distance between the axis and the axis' title. More... | |
| virtual void | SetTitleSize (Float_t size=0.02, Option_t *axis="X") |
| Set the axis' title size. More... | |
| virtual void | SetXTitle (const char *title) |
| virtual void | SetYTitle (const char *title) |
| virtual void | SetZTitle (const char *title) |
| void | UseCurrentStyle () |
| Copy current attributes from/to current style. More... | |
| Public Member Functions inherited from TNamed | |
| TNamed () | |
| TNamed (const char *name, const char *title) | |
| TNamed (const TString &name, const TString &title) | |
| TNamed (const TNamed &named) | |
| TNamed copy ctor. More... | |
| virtual | ~TNamed () |
| TNamed destructor. More... | |
| virtual void | Clear (Option_t *option="") |
| Set name and title to empty strings (""). More... | |
| virtual Int_t | Compare (const TObject *obj) const |
| Compare two TNamed objects. More... | |
| virtual void | FillBuffer (char *&buffer) |
| Encode TNamed into output buffer. More... | |
| virtual const char * | GetName () const |
| Returns name of object. More... | |
| virtual const char * | GetTitle () const |
| Returns title of object. More... | |
| virtual ULong_t | Hash () const |
| Return hash value for this object. More... | |
| virtual Bool_t | IsSortable () const |
| virtual void | ls (Option_t *option="") const |
| List TNamed name and title. More... | |
| TNamed & | operator= (const TNamed &rhs) |
| TNamed assignment operator. More... | |
| virtual Int_t | Sizeof () const |
| Return size of the TNamed part of the TObject. More... | |
| Public Member Functions inherited from TObject | |
| TObject () | |
| TObject constructor. More... | |
| TObject (const TObject &object) | |
| TObject copy ctor. More... | |
| virtual | ~TObject () |
| TObject destructor. More... | |
| void | AbstractMethod (const char *method) const |
| Use this method to implement an "abstract" method that you don't want to leave purely abstract. More... | |
| virtual void | AppendPad (Option_t *option="") |
| Append graphics object to current pad. More... | |
| ULong_t | CheckedHash () |
| Checked and record whether for this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object. More... | |
| virtual const char * | ClassName () const |
| Returns name of class to which the object belongs. More... | |
| virtual void | Delete (Option_t *option="") |
| Delete this object. More... | |
| virtual void | DrawClass () const |
| Draw class inheritance tree of the class to which this object belongs. More... | |
| virtual TObject * | DrawClone (Option_t *option="") const |
Draw a clone of this object in the current selected pad for instance with: gROOT->SetSelectedPad(gPad). More... | |
| virtual void | Dump () const |
| Dump contents of object on stdout. More... | |
| virtual void | Error (const char *method, const char *msgfmt,...) const |
| Issue error message. More... | |
| virtual void | Execute (const char *method, const char *params, Int_t *error=0) |
| Execute method on this object with the given parameter string, e.g. More... | |
| virtual void | Execute (TMethod *method, TObjArray *params, Int_t *error=0) |
| Execute method on this object with parameters stored in the TObjArray. More... | |
| virtual void | Fatal (const char *method, const char *msgfmt,...) const |
| Issue fatal error message. More... | |
| virtual Option_t * | GetDrawOption () const |
| Get option used by the graphics system to draw this object. More... | |
| virtual const char * | GetIconName () const |
| Returns mime type name of object. More... | |
| virtual UInt_t | GetUniqueID () const |
| Return the unique object id. More... | |
| virtual Bool_t | HandleTimer (TTimer *timer) |
| Execute action in response of a timer timing out. More... | |
| Bool_t | HasInconsistentHash () const |
| Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e. More... | |
| virtual void | Info (const char *method, const char *msgfmt,...) const |
| Issue info message. More... | |
| virtual Bool_t | InheritsFrom (const char *classname) const |
| Returns kTRUE if object inherits from class "classname". More... | |
| virtual Bool_t | InheritsFrom (const TClass *cl) const |
| Returns kTRUE if object inherits from TClass cl. More... | |
| virtual void | Inspect () const |
| Dump contents of this object in a graphics canvas. More... | |
| void | InvertBit (UInt_t f) |
| virtual Bool_t | IsEqual (const TObject *obj) const |
| Default equal comparison (objects are equal if they have the same address in memory). More... | |
| virtual Bool_t | IsFolder () const |
| Returns kTRUE in case object contains browsable objects (like containers or lists of other objects). More... | |
| R__ALWAYS_INLINE Bool_t | IsOnHeap () const |
| R__ALWAYS_INLINE Bool_t | IsZombie () const |
| void | MayNotUse (const char *method) const |
| Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary). More... | |
| virtual Bool_t | Notify () |
| This method must be overridden to handle object notification. More... | |
| void | Obsolete (const char *method, const char *asOfVers, const char *removedFromVers) const |
| Use this method to declare a method obsolete. More... | |
| void | operator delete (void *ptr) |
| Operator delete. More... | |
| void | operator delete[] (void *ptr) |
| Operator delete []. More... | |
| void * | operator new (size_t sz) |
| void * | operator new (size_t sz, void *vp) |
| void * | operator new[] (size_t sz) |
| void * | operator new[] (size_t sz, void *vp) |
| TObject & | operator= (const TObject &rhs) |
| TObject assignment operator. More... | |
| virtual void | Pop () |
| Pop on object drawn in a pad to the top of the display list. More... | |
| virtual Int_t | Read (const char *name) |
| Read contents of object with specified name from the current directory. More... | |
| void | ResetBit (UInt_t f) |
| virtual void | SaveAs (const char *filename="", Option_t *option="") const |
| Save this object in the file specified by filename. More... | |
| void | SetBit (UInt_t f, Bool_t set) |
| Set or unset the user status bits as specified in f. More... | |
| void | SetBit (UInt_t f) |
| virtual void | SetDrawOption (Option_t *option="") |
| Set drawing option for object. More... | |
| virtual void | SetUniqueID (UInt_t uid) |
| Set the unique object id. More... | |
| virtual void | SysError (const char *method, const char *msgfmt,...) const |
| Issue system error message. More... | |
| R__ALWAYS_INLINE Bool_t | TestBit (UInt_t f) const |
| Int_t | TestBits (UInt_t f) const |
| virtual void | Warning (const char *method, const char *msgfmt,...) const |
| Issue warning message. More... | |
| virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) |
| Write this object to the current directory. More... | |
| virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) const |
| Write this object to the current directory. More... | |
| Public Member Functions inherited from TAttLine | |
| TAttLine () | |
| AttLine default constructor. More... | |
| TAttLine (Color_t lcolor, Style_t lstyle, Width_t lwidth) | |
| AttLine normal constructor. More... | |
| virtual | ~TAttLine () |
| AttLine destructor. More... | |
| void | Copy (TAttLine &attline) const |
| Copy this line attributes to a new TAttLine. More... | |
| Int_t | DistancetoLine (Int_t px, Int_t py, Double_t xp1, Double_t yp1, Double_t xp2, Double_t yp2) |
| Compute distance from point px,py to a line. More... | |
| virtual Color_t | GetLineColor () const |
| Return the line color. More... | |
| virtual Style_t | GetLineStyle () const |
| Return the line style. More... | |
| virtual Width_t | GetLineWidth () const |
| Return the line width. More... | |
| virtual void | Modify () |
| Change current line attributes if necessary. More... | |
| virtual void | ResetAttLine (Option_t *option="") |
| Reset this line attributes to default values. More... | |
| virtual void | SaveLineAttributes (std::ostream &out, const char *name, Int_t coldef=1, Int_t stydef=1, Int_t widdef=1) |
| Save line attributes as C++ statement(s) on output stream out. More... | |
| virtual void | SetLineAttributes () |
| Invoke the DialogCanvas Line attributes. More... | |
| virtual void | SetLineColor (Color_t lcolor) |
| Set the line color. More... | |
| virtual void | SetLineColorAlpha (Color_t lcolor, Float_t lalpha) |
| Set a transparent line color. More... | |
| virtual void | SetLineStyle (Style_t lstyle) |
| Set the line style. More... | |
| virtual void | SetLineWidth (Width_t lwidth) |
| Set the line width. More... | |
| Public Member Functions inherited from TAttFill | |
| TAttFill () | |
| AttFill default constructor. More... | |
| TAttFill (Color_t fcolor, Style_t fstyle) | |
| AttFill normal constructor. More... | |
| virtual | ~TAttFill () |
| AttFill destructor. More... | |
| void | Copy (TAttFill &attfill) const |
| Copy this fill attributes to a new TAttFill. More... | |
| virtual Color_t | GetFillColor () const |
| Return the fill area color. More... | |
| virtual Style_t | GetFillStyle () const |
| Return the fill area style. More... | |
| virtual Bool_t | IsTransparent () const |
| virtual void | Modify () |
| Change current fill area attributes if necessary. More... | |
| virtual void | ResetAttFill (Option_t *option="") |
| Reset this fill attributes to default values. More... | |
| virtual void | SaveFillAttributes (std::ostream &out, const char *name, Int_t coldef=1, Int_t stydef=1001) |
| Save fill attributes as C++ statement(s) on output stream out. More... | |
| virtual void | SetFillAttributes () |
| Invoke the DialogCanvas Fill attributes. More... | |
| virtual void | SetFillColor (Color_t fcolor) |
| Set the fill area color. More... | |
| virtual void | SetFillColorAlpha (Color_t fcolor, Float_t falpha) |
| Set a transparent fill color. More... | |
| virtual void | SetFillStyle (Style_t fstyle) |
| Set the fill area style. More... | |
| Public Member Functions inherited from TAttMarker | |
| TAttMarker () | |
| TAttMarker default constructor. More... | |
| TAttMarker (Color_t color, Style_t style, Size_t msize) | |
| TAttMarker normal constructor. More... | |
| virtual | ~TAttMarker () |
| TAttMarker destructor. More... | |
| void | Copy (TAttMarker &attmarker) const |
| Copy this marker attributes to a new TAttMarker. More... | |
| virtual Color_t | GetMarkerColor () const |
| Return the marker color. More... | |
| virtual Size_t | GetMarkerSize () const |
| Return the marker size. More... | |
| virtual Style_t | GetMarkerStyle () const |
| Return the marker style. More... | |
| virtual void | Modify () |
| Change current marker attributes if necessary. More... | |
| virtual void | ResetAttMarker (Option_t *toption="") |
| Reset this marker attributes to the default values. More... | |
| virtual void | SaveMarkerAttributes (std::ostream &out, const char *name, Int_t coldef=1, Int_t stydef=1, Int_t sizdef=1) |
| Save line attributes as C++ statement(s) on output stream out. More... | |
| virtual void | SetMarkerAttributes () |
| Invoke the DialogCanvas Marker attributes. More... | |
| virtual void | SetMarkerColor (Color_t mcolor=1) |
| Set the marker color. More... | |
| virtual void | SetMarkerColorAlpha (Color_t mcolor, Float_t malpha) |
| Set a transparent marker color. More... | |
| virtual void | SetMarkerSize (Size_t msize=1) |
| Set the marker size. More... | |
| virtual void | SetMarkerStyle (Style_t mstyle=1) |
| Set the marker style. More... | |
| Public Member Functions inherited from TArrayD | |
| TArrayD () | |
| Default TArrayD ctor. More... | |
| TArrayD (Int_t n) | |
| Create TArrayD object and set array size to n doubles. More... | |
| TArrayD (Int_t n, const Double_t *array) | |
| Create TArrayD object and initialize it with values of array. More... | |
| TArrayD (const TArrayD &array) | |
| Copy constructor. More... | |
| virtual | ~TArrayD () |
| Delete TArrayD object. More... | |
| void | AddAt (Double_t c, Int_t i) |
| Set the double c value at position i in the array. More... | |
| void | Adopt (Int_t n, Double_t *array) |
| Adopt array arr into TArrayD, i.e. More... | |
| Double_t | At (Int_t i) const |
| void | Copy (TArrayD &array) const |
| const Double_t * | GetArray () const |
| Double_t * | GetArray () |
| Double_t | GetAt (Int_t i) const |
| Stat_t | GetSum () const |
| TArrayD & | operator= (const TArrayD &rhs) |
| TArrayD assignment operator. More... | |
| Double_t & | operator[] (Int_t i) |
| Double_t | operator[] (Int_t i) const |
| void | Reset () |
| void | Reset (Double_t val) |
| void | Set (Int_t n) |
| Set size of this array to n doubles. More... | |
| void | Set (Int_t n, const Double_t *array) |
| Set size of this array to n doubles and set the contents This function should not be called if the array was declared via Adopt. More... | |
| void | SetAt (Double_t v, Int_t i) |
| Public Member Functions inherited from TArray | |
| TArray () | |
| TArray (Int_t n) | |
| TArray (const TArray &a) | |
| virtual | ~TArray () |
| Int_t | GetSize () const |
| TArray & | operator= (const TArray &rhs) |
Static Public Member Functions | |
| static void | Approximate (Bool_t approx=kTRUE) |
| Static function, set the fgApproximate flag. More... | |
| Static Public Member Functions inherited from TH1 | |
| static void | AddDirectory (Bool_t add=kTRUE) |
| Sets the flag controlling the automatic add of histograms in memory. More... | |
| static Bool_t | AddDirectoryStatus () |
| Static function: cannot be inlined on Windows/NT. More... | |
| static Int_t | FitOptionsMake (Option_t *option, Foption_t &Foption) |
| Decode string choptin and fill fitOption structure. More... | |
| static Int_t | GetDefaultBufferSize () |
| Static function return the default buffer size for automatic histograms the parameter fgBufferSize may be changed via SetDefaultBufferSize. More... | |
| static Bool_t | GetDefaultSumw2 () |
| Return kTRUE if TH1::Sumw2 must be called when creating new histograms. More... | |
| static void | SetDefaultBufferSize (Int_t buffersize=1000) |
| Static function to set the default buffer size for automatic histograms. More... | |
| static void | SetDefaultSumw2 (Bool_t sumw2=kTRUE) |
When this static function is called with sumw2=kTRUE, all new histograms will automatically activate the storage of the sum of squares of errors, ie TH1::Sumw2 is automatically called. More... | |
| static void | SmoothArray (Int_t NN, Double_t *XX, Int_t ntimes=1) |
| Smooth array xx, translation of Hbook routine hsmoof.F based on algorithm 353QH twice presented by J. More... | |
| static void | StatOverflows (Bool_t flag=kTRUE) |
| if flag=kTRUE, underflows and overflows are used by the Fill functions in the computation of statistics (mean value, StdDev). More... | |
| static TH1 * | TransformHisto (TVirtualFFT *fft, TH1 *h_output, Option_t *option) |
| For a given transform (first parameter), fills the histogram (second parameter) with the transform output data, specified in the third parameter If the 2nd parameter h_output is empty, a new histogram (TH1D or TH2D) is created and the user is responsible for deleting it. More... | |
| Static Public Member Functions inherited from TObject | |
| static Long_t | GetDtorOnly () |
| Return destructor only flag. More... | |
| static Bool_t | GetObjectStat () |
| Get status of object stat flag. More... | |
| static void | SetDtorOnly (void *obj) |
| Set destructor only flag. More... | |
| static void | SetObjectStat (Bool_t stat) |
| Turn on/off tracking of objects in the TObjectTable. More... | |
| Static Public Member Functions inherited from TArray | |
| static TArray * | ReadArray (TBuffer &b, const TClass *clReq) |
| Read TArray object from buffer. More... | |
| static void | WriteArray (TBuffer &b, const TArray *a) |
| Write TArray object to buffer. More... | |
Protected Member Functions | |
| virtual Int_t | BufferFill (Double_t, Double_t) |
| accumulate arguments in buffer. More... | |
| virtual Int_t | BufferFill (Double_t, Double_t, Double_t) |
| accumulate arguments in buffer. More... | |
| virtual Int_t | BufferFill (Double_t x, Double_t y, Double_t z, Double_t w) |
| Accumulate arguments in buffer. More... | |
| virtual TProfile * | DoProfile (bool onX, const char *name, Int_t firstbin, Int_t lastbin, Option_t *option) const |
| Implementation of ProfileX or ProfileY for a TProfile2D. More... | |
| Int_t | Fill (const Double_t *v) |
| Int_t | Fill (Double_t, Double_t) |
| Increment cell defined by x,y by 1. More... | |
| virtual Double_t | GetBinErrorSqUnchecked (Int_t bin) const |
| virtual Double_t | RetrieveBinContent (Int_t bin) const |
| Raw retrieval of bin content on internal data structure see convention for numbering bins in TH1::GetBin. More... | |
| void | SetBins (const Int_t *nbins, const Double_t *range) |
| Protected Member Functions inherited from TH2D | |
| virtual void | UpdateBinContent (Int_t bin, Double_t content) |
| Raw update of bin content on internal data structure see convention for numbering bins in TH1::GetBin. More... | |
| Protected Member Functions inherited from TH2 | |
| TH2 () | |
| Constructor. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Int_t nbinsy, Double_t ylow, Double_t yup) | |
| See comments in the TH1 base class constructors. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Int_t nbinsy, Double_t ylow, Double_t yup) | |
| See comments in the TH1 base class constructors. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Int_t nbinsy, const Double_t *ybins) | |
| See comments in the TH1 base class constructors. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Int_t nbinsy, const Double_t *ybins) | |
| See comments in the TH1 base class constructors. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, const Float_t *xbins, Int_t nbinsy, const Float_t *ybins) | |
| See comments in the TH1 base class constructors. More... | |
| virtual void | DoFitSlices (bool onX, TF1 *f1, Int_t firstbin, Int_t lastbin, Int_t cut, Option_t *option, TObjArray *arr) |
| virtual TH1D * | DoProjection (bool onX, const char *name, Int_t firstbin, Int_t lastbin, Option_t *option) const |
| Internal (protected) method for performing projection on the X or Y axis called by ProjectionX or ProjectionY. More... | |
| virtual TH1D * | DoQuantiles (bool onX, const char *name, Double_t prob) const |
| Implementation of quantiles for x or y. More... | |
| Int_t | Fill (Double_t) |
| Invalid Fill method. More... | |
| Int_t | Fill (const char *, Double_t) |
| Increment bin with namex with a weight w. More... | |
| Protected Member Functions inherited from TH1 | |
| TH1 () | |
| Histogram default constructor. More... | |
| TH1 (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup) | |
| Normal constructor for fix bin size histograms. More... | |
| TH1 (const char *name, const char *title, Int_t nbinsx, const Float_t *xbins) | |
| Normal constructor for variable bin size histograms. More... | |
| TH1 (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins) | |
| Normal constructor for variable bin size histograms. More... | |
| virtual Int_t | AutoP2FindLimits (Double_t min, Double_t max) |
| Buffer-based estimate of the histogram range using the power of 2 algorithm. More... | |
| virtual void | DoFillN (Int_t ntimes, const Double_t *x, const Double_t *w, Int_t stride=1) |
| Internal method to fill histogram content from a vector called directly by TH1::BufferEmpty. More... | |
| virtual Double_t | DoIntegral (Int_t ix1, Int_t ix2, Int_t iy1, Int_t iy2, Int_t iz1, Int_t iz2, Double_t &err, Option_t *opt, Bool_t doerr=kFALSE) const |
| Internal function compute integral and optionally the error between the limits specified by the bin number values working for all histograms (1D, 2D and 3D) More... | |
| virtual Bool_t | FindNewAxisLimits (const TAxis *axis, const Double_t point, Double_t &newMin, Double_t &newMax) |
| finds new limits for the axis so that point is within the range and the limits are compatible with the previous ones (see TH1::Merge). More... | |
| Bool_t | GetStatOverflowsBehaviour () const |
| Bool_t | IsEmpty () const |
| Check if an histogram is empty (this a protected method used mainly by TH1Merger ) More... | |
| virtual void | SavePrimitiveHelp (std::ostream &out, const char *hname, Option_t *option="") |
| Helper function for the SavePrimitive functions from TH1 or classes derived from TH1, eg TProfile, TProfile2D. More... | |
| Protected Member Functions inherited from TObject | |
| virtual void | DoError (int level, const char *location, const char *fmt, va_list va) const |
| Interface to ErrorHandler (protected). More... | |
| void | MakeZombie () |
| Protected Member Functions inherited from TArray | |
| Bool_t | BoundsOk (const char *where, Int_t at) const |
| Bool_t | OutOfBoundsError (const char *where, Int_t i) const |
| Generate an out-of-bounds error. Always returns false. More... | |
Protected Attributes | |
| TArrayD | fBinEntries |
| TArrayD | fBinSumw2 |
| EErrorType | fErrorMode |
| Bool_t | fScaling |
| Double_t | fTsumwz |
| True when TProfile2D::Scale is called. More... | |
| Double_t | fTsumwz2 |
| Double_t | fZmax |
| Double_t | fZmin |
| Protected Attributes inherited from TH2 | |
| Double_t | fScalefactor |
| Double_t | fTsumwxy |
| Double_t | fTsumwy |
| Double_t | fTsumwy2 |
| Protected Attributes inherited from TH1 | |
| Short_t | fBarOffset |
| (1000*offset) for bar charts or legos More... | |
| Short_t | fBarWidth |
| (1000*width) for bar charts or legos More... | |
| EBinErrorOpt | fBinStatErrOpt |
| option for bin statistical errors More... | |
| Double_t * | fBuffer |
| [fBufferSize] entry buffer More... | |
| Int_t | fBufferSize |
| fBuffer size More... | |
| TArrayD | fContour |
| Array to display contour levels. More... | |
| Int_t | fDimension |
| !Histogram dimension (1, 2 or 3 dim) More... | |
| TDirectory * | fDirectory |
| !Pointer to directory holding this histogram More... | |
| Double_t | fEntries |
| Number of entries. More... | |
| TList * | fFunctions |
| ->Pointer to list of functions (fits and user) More... | |
| Double_t * | fIntegral |
| !Integral of bins used by GetRandom More... | |
| Double_t | fMaximum |
| Maximum value for plotting. More... | |
| Double_t | fMinimum |
| Minimum value for plotting. More... | |
| Int_t | fNcells |
| number of bins(1D), cells (2D) +U/Overflows More... | |
| Double_t | fNormFactor |
| Normalization factor. More... | |
| TString | fOption |
| histogram options More... | |
| TVirtualHistPainter * | fPainter |
| !pointer to histogram painter More... | |
| EStatOverflows | fStatOverflows |
| per object flag to use under/overflows in statistics More... | |
| TArrayD | fSumw2 |
| Array of sum of squares of weights. More... | |
| Double_t | fTsumw |
| Total Sum of weights. More... | |
| Double_t | fTsumw2 |
| Total Sum of squares of weights. More... | |
| Double_t | fTsumwx |
| Total Sum of weight*X. More... | |
| Double_t | fTsumwx2 |
| Total Sum of weight*X*X. More... | |
| TAxis | fXaxis |
| X axis descriptor. More... | |
| TAxis | fYaxis |
| Y axis descriptor. More... | |
| TAxis | fZaxis |
| Z axis descriptor. More... | |
| Protected Attributes inherited from TNamed | |
| TString | fName |
| TString | fTitle |
| Protected Attributes inherited from TAttLine | |
| Color_t | fLineColor |
| Line color. More... | |
| Style_t | fLineStyle |
| Line style. More... | |
| Width_t | fLineWidth |
| Line width. More... | |
| Protected Attributes inherited from TAttFill | |
| Color_t | fFillColor |
| Fill area color. More... | |
| Style_t | fFillStyle |
| Fill area style. More... | |
| Protected Attributes inherited from TAttMarker | |
| Color_t | fMarkerColor |
| Marker color. More... | |
| Size_t | fMarkerSize |
| Marker size. More... | |
| Style_t | fMarkerStyle |
| Marker style. More... | |
Static Protected Attributes | |
| static Bool_t | fgApproximate = kFALSE |
| Static Protected Attributes inherited from TH1 | |
| static Bool_t | fgAddDirectory = kTRUE |
| !flag to add histograms to the directory More... | |
| static Int_t | fgBufferSize = 1000 |
| !default buffer size for automatic histograms More... | |
| static Bool_t | fgDefaultSumw2 = kFALSE |
| !flag to call TH1::Sumw2 automatically at histogram creation time More... | |
| static Bool_t | fgStatOverflows = kFALSE |
| !flag to use under/overflows in statistics More... | |
Private Member Functions | |
| Double_t * | GetB () |
| Double_t * | GetB2 () |
| Double_t * | GetW () |
| Double_t * | GetW2 () |
| void | SetBins (Int_t, Double_t, Double_t) |
| Redefine x axis parameters. More... | |
| void | SetBins (Int_t, const Double_t *) |
| Redefine x axis parameters with variable bin sizes. More... | |
| void | SetBins (Int_t, Double_t, Double_t, Int_t, Double_t, Double_t, Int_t, Double_t, Double_t) |
| Redefine x, y and z axis parameters. More... | |
| void | SetBins (Int_t, const Double_t *, Int_t, const Double_t *, Int_t, const Double_t *) |
| Redefine x, y and z axis parameters with variable bin sizes. More... | |
Friends | |
| class | TProfileHelper |
Additional Inherited Members | |
| Public Types inherited from TH1 | |
| enum | { kNoAxis = 0, kXaxis = BIT(0), kYaxis = BIT(1), kZaxis = BIT(2), kAllAxes = kXaxis | kYaxis | kZaxis } |
| enum | { kNstat = 13 } |
| enum | EBinErrorOpt { kNormal = 0, kPoisson = 1, kPoisson2 = 2 } |
| enum | EStatOverflows { kIgnore = 0, kConsider = 1, kNeutral = 2 } |
| Enumeration specifying the way to treat statoverflow. More... | |
| enum | EStatusBits { kNoStats = BIT(9), kUserContour = BIT(10), kLogX = BIT(15), kIsZoomed = BIT(16), kNoTitle = BIT(17), kIsAverage = BIT(18), kIsNotW = BIT(19), kAutoBinPTwo = BIT(20) } |
| Public Types inherited from TObject | |
| enum | { kIsOnHeap = 0x01000000, kNotDeleted = 0x02000000, kZombie = 0x04000000, kInconsistent = 0x08000000, kBitMask = 0x00ffffff } |
| enum | { kSingleKey = BIT(0), kOverwrite = BIT(1), kWriteDelete = BIT(2) } |
| enum | EDeprecatedStatusBits { kObjInCanvas = BIT(3) } |
| enum | EStatusBits { kCanDelete = BIT(0), kMustCleanup = BIT(3), kIsReferenced = BIT(4), kHasUUID = BIT(5), kCannotPick = BIT(6), kNoContextMenu = BIT(8), kInvalidObject = BIT(13) } |
| Public Attributes inherited from TArrayD | |
| Double_t * | fArray |
| Public Attributes inherited from TArray | |
| Int_t | fN |
| Static Protected Member Functions inherited from TH1 | |
| static Int_t | AutoP2GetBins (Int_t n) |
| Auxilliary function to get the next power of 2 integer value larger then n. More... | |
| static Double_t | AutoP2GetPower2 (Double_t x, Bool_t next=kTRUE) |
| Auxilliary function to get the power of 2 next (larger) or previous (smaller) a given x. More... | |
| static bool | CheckAxisLimits (const TAxis *a1, const TAxis *a2) |
| Check that the axis limits of the histograms are the same. More... | |
| static bool | CheckBinLabels (const TAxis *a1, const TAxis *a2) |
| Check that axis have same labels. More... | |
| static bool | CheckBinLimits (const TAxis *a1, const TAxis *a2) |
| Check bin limits. More... | |
| static bool | CheckConsistency (const TH1 *h1, const TH1 *h2) |
| Check histogram compatibility. More... | |
| static bool | CheckConsistentSubAxes (const TAxis *a1, Int_t firstBin1, Int_t lastBin1, const TAxis *a2, Int_t firstBin2=0, Int_t lastBin2=0) |
| Check that two sub axis are the same. More... | |
| static bool | CheckEqualAxes (const TAxis *a1, const TAxis *a2) |
| Check that the axis are the same. More... | |
| static Bool_t | RecomputeAxisLimits (TAxis &destAxis, const TAxis &anAxis) |
| Finds new limits for the axis for the Merge function. More... | |
| static Bool_t | SameLimitsAndNBins (const TAxis &axis1, const TAxis &axis2) |
| Same limits and bins. More... | |
#include <TProfile2D.h>
| TProfile2D::TProfile2D | ( | ) |
Default constructor for Profile2D histograms.
Definition at line 72 of file TProfile2D.cxx.
| TProfile2D::TProfile2D | ( | const char * | name, |
| const char * | title, | ||
| Int_t | nx, | ||
| Double_t | xlow, | ||
| Double_t | xup, | ||
| Int_t | ny, | ||
| Double_t | ylow, | ||
| Double_t | yup, | ||
| Double_t | zlow, | ||
| Double_t | zup, | ||
| Option_t * | option = "" |
||
| ) |
Constructor for Profile2D histograms with range in z.
The first eight parameters are similar to TH2D::TH2D. Only the values of Z between ZMIN and ZMAX will be considered at filling time. zmin and zmax will also be the maximum and minimum values on the z scale when drawing the profile2D.
See TProfile2D::BuildOptions for more explanations on errors
Definition at line 153 of file TProfile2D.cxx.
| TProfile2D::TProfile2D | ( | const char * | name, |
| const char * | title, | ||
| Int_t | nx, | ||
| Double_t | xlow, | ||
| Double_t | xup, | ||
| Int_t | ny, | ||
| Double_t | ylow, | ||
| Double_t | yup, | ||
| Option_t * | option = "" |
||
| ) |
Normal Constructor for Profile histograms.
The first eight parameters are similar to TH2D::TH2D. All values of z are accepted at filling time. To fill a profile2D histogram, one must use TProfile2D::Fill function.
Note that when filling the profile histogram the function Fill checks if the variable z is between fZmin and fZmax. If a minimum or maximum value is set for the Z scale before filling, then all values below zmin or above zmax will be discarded. Setting the minimum or maximum value for the Z scale before filling has the same effect as calling the special TProfile2D constructor below where zmin and zmax are specified.
H(I,J) is printed as the cell contents. The errors computed are s(I,J) if CHOPT='S' (spread option), or e(I,J) if CHOPT=' ' (error on mean).
See TProfile2D::BuildOptions for explanation of parameters
see other constructors below with all possible combinations of fix and variable bin size like in TH2D.
Definition at line 109 of file TProfile2D.cxx.
| TProfile2D::TProfile2D | ( | const char * | name, |
| const char * | title, | ||
| Int_t | nbinsx, | ||
| const Double_t * | xbins, | ||
| Int_t | nbinsy, | ||
| Double_t | ylow, | ||
| Double_t | yup, | ||
| Option_t * | option = "" |
||
| ) |
Create a 2-D Profile with variable bins in X and fix bins in Y.
Definition at line 119 of file TProfile2D.cxx.
| TProfile2D::TProfile2D | ( | const char * | name, |
| const char * | title, | ||
| Int_t | nbinsx, | ||
| Double_t | xlow, | ||
| Double_t | xup, | ||
| Int_t | nbinsy, | ||
| const Double_t * | ybins, | ||
| Option_t * | option = "" |
||
| ) |
Create a 2-D Profile with fix bins in X and variable bins in Y.
Definition at line 128 of file TProfile2D.cxx.
| TProfile2D::TProfile2D | ( | const char * | name, |
| const char * | title, | ||
| Int_t | nbinsx, | ||
| const Double_t * | xbins, | ||
| Int_t | nbinsy, | ||
| const Double_t * | ybins, | ||
| Option_t * | option = "" |
||
| ) |
Create a 2-D Profile with variable bins in X and variable bins in Y.
Definition at line 137 of file TProfile2D.cxx.
| TProfile2D::TProfile2D | ( | const TProfile2D & | profile | ) |
Copy constructor.
Definition at line 190 of file TProfile2D.cxx.
|
virtual |
Default destructor for Profile2D histograms.
Definition at line 82 of file TProfile2D.cxx.
Performs the operation: this = this + c1*f1 .
Reimplemented from TH1.
Definition at line 198 of file TProfile2D.cxx.
Performs the operation: this = this + c1*h1 .
Reimplemented from TH1.
Definition at line 207 of file TProfile2D.cxx.
Replace contents of this profile2D by the addition of h1 and h2.
this = c1*h1 + c2*h2
Reimplemented from TH1.
Definition at line 226 of file TProfile2D.cxx.
Static function, set the fgApproximate flag.
When the flag is true, the function GetBinError will approximate the bin error with the average profile error on all bins in the following situation only
Definition at line 254 of file TProfile2D.cxx.
Fill histogram with all entries in the buffer.
Reimplemented from TH2.
Definition at line 268 of file TProfile2D.cxx.
accumulate arguments in buffer.
When buffer is full, empty the buffer
fBuffer[0] = number of entries in bufferfBuffer[1] = w of first entryfBuffer[2] = x of first entry Reimplemented from TH2.
Definition at line 43 of file TProfile2D.h.
Accumulate arguments in buffer.
When buffer is full, empty the buffer.
Definition at line 335 of file TProfile2D.cxx.
Set Profile2D histogram structure and options.
option: this is the option for the computation of the t error of the profile ( TProfile2D::GetBinError ) possible values for the options are documented in TProfile2D::SetErrorOption
See TProfile::BuildOptions for a detailed description
Definition at line 173 of file TProfile2D.cxx.
Copy a Profile2D histogram to a new profile2D histogram.
Reimplemented from TH2D.
Definition at line 363 of file TProfile2D.cxx.
Performs the operation: this = this/(c1*f1) .
This function is not implemented
Reimplemented from TH1.
Definition at line 392 of file TProfile2D.cxx.
Divide this profile2D by h1.
this = this/h1
This function return kFALSE if the divide operation failed
Reimplemented from TH1.
Definition at line 405 of file TProfile2D.cxx.
|
virtual |
Replace contents of this profile2D by the division of h1 by h2.
this = c1*h1/(c2*h2)
This function return kFALSE if the divide operation failed
Reimplemented from TH1.
Definition at line 488 of file TProfile2D.cxx.
|
protectedvirtual |
Implementation of ProfileX or ProfileY for a TProfile2D.
Do correctly the combination of the bin averages when doing the projection
Reimplemented from TH2.
Definition at line 1289 of file TProfile2D.cxx.
Profile histogram is resized along axis such that x is in the axis range.
The new axis limits are recomputed by doubling iteratively the current axis range until the specified value x is within the limits. The algorithm makes a copy of the histogram, then loops on all bins of the old histogram to fill the extended histogram. Takes into account errors (Sumw2) if any. The axis must be extendable before invoking this function.
Ex: h->GetXaxis()->SetCanExtend(kTRUE)
Reimplemented from TH1.
Definition at line 1404 of file TProfile2D.cxx.
Definition at line 50 of file TProfile2D.h.
Increment cell defined by x,y by 1.
If the storage of the sum of squares of weights has been triggered, via the function Sumw2, then the sum of the squares of weights is incremented by 1 in the cell corresponding to x,y.
The function returns the corresponding global bin number which has its content incremented by 1
Reimplemented from TH2.
Definition at line 55 of file TProfile2D.h.
Fill a Profile2D histogram (no weights).
Reimplemented from TH2.
Definition at line 585 of file TProfile2D.cxx.
Fill a Profile2D histogram (no weights).
Reimplemented from TH2.
Definition at line 625 of file TProfile2D.cxx.
Fill a Profile2D histogram (no weights).
Reimplemented from TH2.
Definition at line 698 of file TProfile2D.cxx.
Fill a Profile2D histogram (no weights).
Reimplemented from TH2.
Definition at line 662 of file TProfile2D.cxx.
Fill a Profile2D histogram with weights.
Definition at line 735 of file TProfile2D.cxx.
|
inlineprivate |
Definition at line 62 of file TProfile2D.h.
|
inlineprivate |
Definition at line 63 of file TProfile2D.h.
Return bin content of a Profile2D histogram.
Reimplemented from TH2.
Definition at line 777 of file TProfile2D.cxx.
Reimplemented from TH2.
Definition at line 107 of file TProfile2D.h.
Reimplemented from TH2.
Definition at line 108 of file TProfile2D.h.
Return bin effective entries for a weighted filled Profile histogram.
In case of an unweighted profile, it is equivalent to the number of entries per bin The effective entries is defined as the square of the sum of the weights divided by the sum of the weights square. TProfile::Sumw2() must be called before filling the profile with weights. Only by calling this method the sum of the square of the weights per bin is stored.
Definition at line 806 of file TProfile2D.cxx.
Return bin entries of a Profile2D histogram.
Definition at line 790 of file TProfile2D.cxx.
Return bin error of a Profile2D histogram.
The computation of errors for a TProfile2D has evolved with the versions of ROOT. The difficulty is in computing errors for bins with low statistics.
Reimplemented from TH1.
Definition at line 829 of file TProfile2D.cxx.
Reimplemented from TH1.
Definition at line 110 of file TProfile2D.h.
Reimplemented from TH1.
Definition at line 111 of file TProfile2D.h.
Reimplemented from TH1.
Definition at line 59 of file TProfile2D.h.
|
inlinevirtual |
Definition at line 114 of file TProfile2D.h.
|
inlinevirtual |
Definition at line 115 of file TProfile2D.h.
| Option_t * TProfile2D::GetErrorOption | ( | ) | const |
Return option to compute profile2D errors.
Definition at line 837 of file TProfile2D.cxx.
|
inline |
Definition at line 144 of file TProfile2D.h.
Fill the array stats from the contents of this profile.
The array stats must be correctly dimensioned in the calling program.
If no axis-subrange is specified (via TAxis::SetRange), the array stats is simply a copy of the statistics quantities computed at filling time. If a sub-range is specified, the function recomputes these quantities from the bin contents in the current axis range.
Reimplemented from TH2.
Definition at line 864 of file TProfile2D.cxx.
|
inlineprivate |
Definition at line 64 of file TProfile2D.h.
|
inlineprivate |
Definition at line 65 of file TProfile2D.h.
|
inlinevirtual |
Definition at line 119 of file TProfile2D.h.
|
inlinevirtual |
Definition at line 118 of file TProfile2D.h.
Reduce the number of bins for this axis to the number of bins having a label.
Reimplemented from TH1.
Definition at line 924 of file TProfile2D.cxx.
Double the number of bins for axis.
Refill histogram This function is called by TAxis::FindBin(const char *label)
Reimplemented from TH1.
Definition at line 934 of file TProfile2D.cxx.
Set option(s) to draw axis with labels.
option might have the following values:
Reimplemented from TH1.
Definition at line 952 of file TProfile2D.cxx.
|
virtual |
Merge all histograms in the collection in this histogram.
This function computes the min/max for the axes, compute a new number of bins, if necessary, add bin contents, errors and statistics. If overflows are present and limits are different the function will fail. The function returns the total number of entries in the result histogram if the merge is successful, -1 otherwise.
IMPORTANT remark. The 2 axis x and y may have different number of bins and different limits, BUT the largest bin width must be a multiple of the smallest bin width and the upper limit must also be a multiple of the bin width.
Reimplemented from TH1.
Definition at line 1119 of file TProfile2D.cxx.
Performs the operation: this = this*c1*f1.
Reimplemented from TH1.
Definition at line 1127 of file TProfile2D.cxx.
Multiply this profile2D by h1.
this = this*h1
Reimplemented from TH1.
Definition at line 1138 of file TProfile2D.cxx.
|
virtual |
Replace contents of this profile2D by multiplication of h1 by h2.
this = (c1*h1)*(c2*h2)
Reimplemented from TH1.
Definition at line 1149 of file TProfile2D.cxx.
| TProfile * TProfile2D::ProfileX | ( | const char * | name = "_pfx", |
| Int_t | firstybin = 0, |
||
| Int_t | lastybin = -1, |
||
| Option_t * | option = "" |
||
| ) | const |
Project a 2-D histogram into a profile histogram along X.
The projection is made from the channels along the Y axis ranging from firstybin to lastybin included. The result is a 1D profile which contains the combination of all the considered bins along Y By default, bins 1 to ny are included When all bins are included, the number of entries in the projection is set to the number of entries of the 2-D histogram, otherwise the number of entries is incremented by 1 for all non empty cells.
The option can also be used to specify the projected profile error type. Values which can be used are 's', 'i', or 'g'. See TProfile::BuildOptions for details
Definition at line 1260 of file TProfile2D.cxx.
| TProfile * TProfile2D::ProfileY | ( | const char * | name = "_pfy", |
| Int_t | firstxbin = 0, |
||
| Int_t | lastxbin = -1, |
||
| Option_t * | option = "" |
||
| ) | const |
Project a 2-D histogram into a profile histogram along X.
The projection is made from the channels along the X axis ranging from firstybin to lastybin included. The result is a 1D profile which contains the combination of all the considered bins along X By default, bins 1 to ny are included When all bins are included, the number of entries in the projection is set to the number of entries of the 2-D histogram, otherwise the number of entries is incremented by 1 for all non empty cells.
The option can also be used to specify the projected profile error type. Values which can be used are 's', 'i', or 'g'. See TProfile::BuildOptions for details
Definition at line 1279 of file TProfile2D.cxx.
Project this profile2D into a 2-D histogram along X,Y.
The projection is always of the type TH2D.
Definition at line 1179 of file TProfile2D.cxx.
Replace current statistics with the values in array stats.
Reimplemented from TH2.
Definition at line 1364 of file TProfile2D.cxx.
|
virtual |
Rebin this histogram grouping nxgroup/nygroup bins along the xaxis/yaxis together.
if newname is not blank a new profile hnew is created. else the current histogram is modified (default) The parameter nxgroup/nygroup indicate how many bins along the xaxis/yaxis of this have to be merged into one bin of hnew If the original profile has errors stored (via Sumw2), the resulting profile has new errors correctly calculated.
examples: if hpxpy is an existing TProfile2D profile with 40 x 40 bins
NOTE : If nxgroup/nygroup is not an exact divider of the number of bins, along the xaxis/yaxis the top limit(s) of the rebinned profile is changed to the upper edge of the xbin=newxbins*nxgroup resp. ybin=newybins*nygroup and the remaining bins are added to the overflow bin. Statistics will be recomputed from the new bin contents.
Reimplemented from TH2.
Definition at line 1442 of file TProfile2D.cxx.
|
virtual |
Rebin only the X axis.
see Rebin2D
Reimplemented from TH2.
Definition at line 1727 of file TProfile2D.cxx.
|
virtual |
Rebin only the Y axis.
see Rebin2D
Reimplemented from TH2.
Definition at line 1735 of file TProfile2D.cxx.
Reset contents of a Profile2D histogram.
Reimplemented from TH2D.
Definition at line 1380 of file TProfile2D.cxx.
Raw retrieval of bin content on internal data structure see convention for numbering bins in TH1::GetBin.
Reimplemented from TH2D.
Definition at line 57 of file TProfile2D.h.
Save primitive as a C++ statement(s) on output stream out.
Note the following restrictions in the code generated:
Reimplemented from TH1.
Definition at line 1746 of file TProfile2D.cxx.
Multiply this profile2D by a constant c1.
`this = c1*this
This function uses the services of TProfile2D::Add
Reimplemented from TH1.
Definition at line 1800 of file TProfile2D.cxx.
Set the number of entries in bin.
Definition at line 1808 of file TProfile2D.cxx.
Definition at line 48 of file TProfile2D.h.
Redefine x axis parameters.
The X axis parameters are modified. The bins content array is resized if errors (Sumw2) the errors array is resized The previous bin contents are lost To change only the axis limits, see TAxis::SetRange
Reimplemented from TH1.
Definition at line 66 of file TProfile2D.h.
Redefine x axis parameters with variable bin sizes.
The X axis parameters are modified. The bins content array is resized if errors (Sumw2) the errors array is resized The previous bin contents are lost To change only the axis limits, see TAxis::SetRange xBins is supposed to be of length nx+1
Reimplemented from TH1.
Definition at line 68 of file TProfile2D.h.
|
inlineprivatevirtual |
Redefine x, y and z axis parameters.
The X, Y and Z axis parameters are modified. The bins content array is resized if errors (Sumw2) the errors array is resized The previous bin contents are lost To change only the axis limits, see TAxis::SetRange
Reimplemented from TH1.
Definition at line 70 of file TProfile2D.h.
|
inlineprivatevirtual |
Redefine x, y and z axis parameters with variable bin sizes.
The X, Y and Z axis parameters are modified. The bins content array is resized if errors (Sumw2) the errors array is resized The previous bin contents are lost To change only the axis limits, see TAxis::SetRange xBins is supposed to be of length nx+1, yBins is supposed to be of length ny+1, zBins is supposed to be of length nz+1
Reimplemented from TH1.
Definition at line 72 of file TProfile2D.h.
|
virtual |
Redefine x and y axis parameters.
Reimplemented from TH1.
Definition at line 1816 of file TProfile2D.cxx.
|
virtual |
Redefine x and y axis parameters for variable bin sizes.
Reimplemented from TH1.
Definition at line 1826 of file TProfile2D.cxx.
Set total number of bins including under/overflow.
Reallocate bin contents array
Reimplemented from TH2D.
Definition at line 1837 of file TProfile2D.cxx.
Set the buffer size in units of 8 bytes (double).
Reimplemented from TH1.
Definition at line 1846 of file TProfile2D.cxx.
Set option to compute profile2D errors.
The computation of the bin errors is based on the parameter option:
See TProfile::BuildOptions for a detailed explanation of all options
Definition at line 1884 of file TProfile2D.cxx.
Create/Delete structure to store sum of squares of weights per bin.
This is needed to compute the correct statistical quantities of a profile filled with weights
This function is automatically called when the histogram is created if the static function TH1::SetDefaultSumw2 has been called before. If flag is false the structure is deleted
Reimplemented from TH1.
Definition at line 1933 of file TProfile2D.cxx.
|
friend |
Definition at line 30 of file TProfile2D.h.
|
protected |
Definition at line 33 of file TProfile2D.h.
|
protected |
Definition at line 40 of file TProfile2D.h.
|
protected |
Definition at line 34 of file TProfile2D.h.
Definition at line 41 of file TProfile2D.h.
|
protected |
Definition at line 37 of file TProfile2D.h.
|
protected |
True when TProfile2D::Scale is called.
Definition at line 38 of file TProfile2D.h.
|
protected |
Definition at line 39 of file TProfile2D.h.
|
protected |
Definition at line 36 of file TProfile2D.h.
|
protected |
Definition at line 35 of file TProfile2D.h.
ROOT 6.14/05 - Reference Guide Generated on Fri Nov 2 2018 11:00:56 (GVA Time) using Doxygen 1.8.13.