ROOT 6.14/05 Reference Guide |
Profile Histogram.
Profile histograms are used to display the mean value of Y and its error for each bin in X. The displayed error is by default the standard error on the mean (i.e. the standard deviation divided by the sqrt(n) ) Profile histograms are in many cases an elegant replacement of two-dimensional histograms : the inter-relation of two measured quantities X and Y can always be visualized by a two-dimensional histogram or scatter-plot; its representation on the line-printer is not particularly satisfactory, except for sparse data. If Y is an unknown (but single-valued) approximate function of X, this function is displayed by a profile histogram with much better precision than by a scatter-plot.
The following formulae show the cumulated contents (capital letters) and the values displayed by the printing or plotting routines (small letters) of the elements for bin J.
2 H(J) = sum Y E(J) = sum Y l(J) = sum l L(J) = sum l h(J) = H(J)/L(J) mean of Y, s(J) = sqrt(E(J)/L(J)- h(J)**2) standard deviation of Y (e.g. RMS) e(J) = s(J)/sqrt(L(J)) standard error on the mean
The displayed bin content for bin J of a TProfile is always h(J). The corresponding bin error is by default e(J). In case the option "s" is used (in the constructor or by calling TProfile::BuildOptions) the displayed error is s(J)
In the special case where s(J) is zero (eg, case of 1 entry only in one bin) the bin error e(J) is computed from the average of the s(J) for all bins if the static function TProfile::Approximate has been called. This simple/crude approximation was suggested in order to keep the bin during a fit operation. But note that this approximation is not the default behaviour. See also TProfile::BuildOptions for other error options and more detailed explanations
Example of a profile histogram with its graphics output
Definition at line 32 of file TProfile.h.
Public Member Functions | |
TProfile () | |
Default constructor for Profile histograms. More... | |
TProfile (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Option_t *option="") | |
Normal Constructor for Profile histograms. More... | |
TProfile (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Double_t ylow, Double_t yup, Option_t *option="") | |
Constructor for Profile histograms with range in y. More... | |
TProfile (const char *name, const char *title, Int_t nbinsx, const Float_t *xbins, Option_t *option="") | |
Constructor for Profile histograms with variable bin size. More... | |
TProfile (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Option_t *option="") | |
Constructor for Profile histograms with variable bin size. More... | |
TProfile (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Double_t ylow, Double_t yup, Option_t *option="") | |
Constructor for Profile histograms with variable bin size. More... | |
TProfile (const TProfile &profile) | |
Copy constructor. More... | |
virtual | ~TProfile () |
Default destructor for Profile histograms. More... | |
virtual Bool_t | Add (TF1 *h1, Double_t c1=1, Option_t *option="") |
Performs the operation: this = this + c1*f1. More... | |
virtual Bool_t | Add (const TH1 *h1, Double_t c1=1) |
Performs the operation: this = this + c1*h1. More... | |
virtual Bool_t | Add (const TH1 *h1, const TH1 *h2, Double_t c1=1, Double_t c2=1) |
Replace contents of this profile by the addition of h1 and h2. More... | |
virtual Int_t | BufferEmpty (Int_t action=0) |
Fill histogram with all entries in the buffer. More... | |
void | BuildOptions (Double_t ymin, Double_t ymax, Option_t *option) |
Set Profile histogram structure and options. More... | |
virtual void | Copy (TObject &hnew) const |
Copy a Profile histogram to a new profile histogram. More... | |
virtual Bool_t | Divide (TF1 *h1, Double_t c1=1) |
Performs the operation: this = this/(c1*f1) . More... | |
virtual Bool_t | Divide (const TH1 *h1) |
Divide this profile by h1. More... | |
virtual Bool_t | Divide (const TH1 *h1, const TH1 *h2, Double_t c1=1, Double_t c2=1, Option_t *option="") |
Replace contents of this profile by the division of h1 by h2. More... | |
virtual void | ExtendAxis (Double_t x, TAxis *axis) |
Profile histogram is resized along x axis such that x is in the axis range. More... | |
virtual Int_t | Fill (Double_t x, Double_t y) |
Fill a Profile histogram (no weights). More... | |
virtual Int_t | Fill (const char *namex, Double_t y) |
Fill a Profile histogram (no weights). More... | |
virtual Int_t | Fill (Double_t x, Double_t y, Double_t w) |
Fill a Profile histogram with weights. More... | |
virtual Int_t | Fill (const char *namex, Double_t y, Double_t w) |
Fill a Profile histogram with weights. More... | |
virtual void | FillN (Int_t ntimes, const Double_t *x, const Double_t *y, const Double_t *w, Int_t stride=1) |
Fill a Profile histogram with weights. More... | |
virtual Double_t | GetBinContent (Int_t bin) const |
Return bin content of a Profile histogram. More... | |
virtual Double_t | GetBinContent (Int_t bin, Int_t) const |
virtual Double_t | GetBinContent (Int_t bin, Int_t, Int_t) const |
virtual Double_t | GetBinEffectiveEntries (Int_t bin) const |
Return bin effective entries for a weighted filled Profile histogram. More... | |
virtual Double_t | GetBinEntries (Int_t bin) const |
Return bin entries of a Profile histogram. More... | |
virtual Double_t | GetBinError (Int_t bin) const |
Return bin error of a Profile histogram. More... | |
virtual Double_t | GetBinError (Int_t bin, Int_t) const |
virtual Double_t | GetBinError (Int_t bin, Int_t, Int_t) const |
virtual TArrayD * | GetBinSumw2 () |
virtual const TArrayD * | GetBinSumw2 () const |
Option_t * | GetErrorOption () const |
Return option to compute profile errors. More... | |
virtual void | GetStats (Double_t *stats) const |
fill the array stats from the contents of this profile. More... | |
virtual Double_t | GetYmax () const |
virtual Double_t | GetYmin () const |
virtual void | LabelsDeflate (Option_t *axis="X") |
Reduce the number of bins for this axis to the number of bins having a label. More... | |
virtual void | LabelsInflate (Option_t *axis="X") |
Double the number of bins for axis. More... | |
virtual void | LabelsOption (Option_t *option="h", Option_t *axis="X") |
Set option(s) to draw axis with labels. More... | |
virtual Long64_t | Merge (TCollection *list) |
Merge all histograms in the collection in this histogram. More... | |
virtual Bool_t | Multiply (TF1 *h1, Double_t c1=1) |
Performs the operation: this = this*c1*f1. More... | |
virtual Bool_t | Multiply (const TH1 *h1) |
Multiply this profile by h1. More... | |
virtual Bool_t | Multiply (const TH1 *h1, const TH1 *h2, Double_t c1=1, Double_t c2=1, Option_t *option="") |
Replace contents of this profile by multiplication of h1 by h2. More... | |
TH1D * | ProjectionX (const char *name="_px", Option_t *option="e") const |
Project this profile into a 1-D histogram along X. More... | |
virtual void | PutStats (Double_t *stats) |
Replace current statistics with the values in array stats. More... | |
TH1 * | Rebin (Int_t ngroup=2, const char *newname="", const Double_t *xbins=0) |
Rebin this profile grouping ngroup bins together. More... | |
virtual void | Reset (Option_t *option="") |
Reset contents of a Profile histogram. More... | |
virtual void | SavePrimitive (std::ostream &out, Option_t *option="") |
Save primitive as a C++ statement(s) on output stream out. More... | |
virtual void | Scale (Double_t c1=1, Option_t *option="") |
Multiply this profile by a constant c1. More... | |
virtual void | SetBinEntries (Int_t bin, Double_t w) |
Set the number of entries in bin. More... | |
virtual void | SetBins (Int_t nbins, Double_t xmin, Double_t xmax) |
Redefine x axis parameters. More... | |
virtual void | SetBins (Int_t nx, const Double_t *xbins) |
Redefine x axis parameters. More... | |
virtual void | SetBinsLength (Int_t n=-1) |
Set total number of bins including under/overflow. More... | |
virtual void | SetBuffer (Int_t buffersize, Option_t *option="") |
Set the buffer size in units of 8 bytes (double). More... | |
virtual void | SetErrorOption (Option_t *option="") |
Set option to compute profile errors. More... | |
virtual void | Sumw2 (Bool_t flag=kTRUE) |
Create/delete structure to store sum of squares of weights per bin. More... | |
Public Member Functions inherited from TH1D | |
TH1D () | |
Constructor. More... | |
TH1D (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup) | |
Create a 1-Dim histogram with fix bins of type double (see TH1::TH1 for explanation of parameters) More... | |
TH1D (const char *name, const char *title, Int_t nbinsx, const Float_t *xbins) | |
Create a 1-Dim histogram with variable bins of type double (see TH1::TH1 for explanation of parameters) More... | |
TH1D (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins) | |
Create a 1-Dim histogram with variable bins of type double (see TH1::TH1 for explanation of parameters) More... | |
TH1D (const TVectorD &v) | |
Create a histogram from a TVectorD by default the histogram name is "TVectorD" and title = "". More... | |
TH1D (const TH1D &h1d) | |
Constructor. More... | |
virtual | ~TH1D () |
Destructor. More... | |
virtual void | AddBinContent (Int_t bin) |
Increment bin content by 1. More... | |
virtual void | AddBinContent (Int_t bin, Double_t w) |
Increment bin content by a weight w. More... | |
TH1D & | operator= (const TH1D &h1) |
Operator =. More... | |
Public Member Functions inherited from TH1 | |
virtual | ~TH1 () |
Histogram default destructor. More... | |
virtual Double_t | AndersonDarlingTest (const TH1 *h2, Option_t *option="") const |
Statistical test of compatibility in shape between this histogram and h2, using the Anderson-Darling 2 sample test. More... | |
virtual Double_t | AndersonDarlingTest (const TH1 *h2, Double_t &advalue) const |
Same function as above but returning also the test statistic value. More... | |
virtual void | Browse (TBrowser *b) |
Browse the Histogram object. More... | |
virtual Bool_t | CanExtendAllAxes () const |
Returns true if all axes are extendable. More... | |
virtual Double_t | Chi2Test (const TH1 *h2, Option_t *option="UU", Double_t *res=0) const |
\( \chi^{2} \) test for comparing weighted and unweighted histograms More... | |
virtual Double_t | Chi2TestX (const TH1 *h2, Double_t &chi2, Int_t &ndf, Int_t &igood, Option_t *option="UU", Double_t *res=0) const |
The computation routine of the Chisquare test. More... | |
virtual Double_t | Chisquare (TF1 *f1, Option_t *option="") const |
Compute and return the chisquare of this histogram with respect to a function The chisquare is computed by weighting each histogram point by the bin error By default the full range of the histogram is used. More... | |
virtual void | ClearUnderflowAndOverflow () |
Remove all the content from the underflow and overflow bins, without changing the number of entries After calling this method, every undeflow and overflow bins will have content 0.0 The Sumw2 is also cleared, since there is no more content in the bins. More... | |
TObject * | Clone (const char *newname=0) const |
Make a complete copy of the underlying object. More... | |
virtual Double_t | ComputeIntegral (Bool_t onlyPositive=false) |
Compute integral (cumulative sum of bins) The result stored in fIntegral is used by the GetRandom functions. More... | |
virtual void | DirectoryAutoAdd (TDirectory *) |
Perform the automatic addition of the histogram to the given directory. More... | |
virtual Int_t | DistancetoPrimitive (Int_t px, Int_t py) |
Compute distance from point px,py to a line. More... | |
virtual void | Draw (Option_t *option="") |
Draw this histogram with options. More... | |
virtual TH1 * | DrawCopy (Option_t *option="", const char *name_postfix="_copy") const |
Copy this histogram and Draw in the current pad. More... | |
virtual TH1 * | DrawNormalized (Option_t *option="", Double_t norm=1) const |
Draw a normalized copy of this histogram. More... | |
virtual void | DrawPanel () |
Display a panel with all histogram drawing options. More... | |
virtual void | Eval (TF1 *f1, Option_t *option="") |
Evaluate function f1 at the center of bins of this histogram. More... | |
virtual void | ExecuteEvent (Int_t event, Int_t px, Int_t py) |
Execute action corresponding to one event. More... | |
virtual TH1 * | FFT (TH1 *h_output, Option_t *option) |
This function allows to do discrete Fourier transforms of TH1 and TH2. More... | |
virtual void | FillRandom (const char *fname, Int_t ntimes=5000) |
Fill histogram following distribution in function fname. More... | |
virtual void | FillRandom (TH1 *h, Int_t ntimes=5000) |
Fill histogram following distribution in histogram h. More... | |
virtual Int_t | FindBin (Double_t x, Double_t y=0, Double_t z=0) |
Return Global bin number corresponding to x,y,z. More... | |
virtual Int_t | FindFirstBinAbove (Double_t threshold=0, Int_t axis=1) const |
Find first bin with content > threshold for axis (1=x, 2=y, 3=z) if no bins with content > threshold is found the function returns -1. More... | |
virtual Int_t | FindFixBin (Double_t x, Double_t y=0, Double_t z=0) const |
Return Global bin number corresponding to x,y,z. More... | |
virtual Int_t | FindLastBinAbove (Double_t threshold=0, Int_t axis=1) const |
Find last bin with content > threshold for axis (1=x, 2=y, 3=z) if no bins with content > threshold is found the function returns -1. More... | |
virtual TObject * | FindObject (const char *name) const |
Search object named name in the list of functions. More... | |
virtual TObject * | FindObject (const TObject *obj) const |
Search object obj in the list of functions. More... | |
virtual TFitResultPtr | Fit (const char *formula, Option_t *option="", Option_t *goption="", Double_t xmin=0, Double_t xmax=0) |
Fit histogram with function fname. More... | |
virtual TFitResultPtr | Fit (TF1 *f1, Option_t *option="", Option_t *goption="", Double_t xmin=0, Double_t xmax=0) |
Fit histogram with function f1. More... | |
virtual void | FitPanel () |
Display a panel with all histogram fit options. More... | |
TH1 * | GetAsymmetry (TH1 *h2, Double_t c2=1, Double_t dc2=0) |
Return an histogram containing the asymmetry of this histogram with h2, where the asymmetry is defined as: More... | |
virtual Color_t | GetAxisColor (Option_t *axis="X") const |
Return the number of divisions for "axis". More... | |
virtual Float_t | GetBarOffset () const |
virtual Float_t | GetBarWidth () const |
virtual Int_t | GetBin (Int_t binx, Int_t biny=0, Int_t binz=0) const |
Return Global bin number corresponding to binx,y,z. More... | |
virtual Double_t | GetBinCenter (Int_t bin) const |
Return bin center for 1D histogram. More... | |
virtual Double_t | GetBinErrorLow (Int_t bin) const |
Return lower error associated to bin number bin. More... | |
virtual EBinErrorOpt | GetBinErrorOption () const |
virtual Double_t | GetBinErrorUp (Int_t bin) const |
Return upper error associated to bin number bin. More... | |
virtual Double_t | GetBinLowEdge (Int_t bin) const |
Return bin lower edge for 1D histogram. More... | |
virtual Double_t | GetBinWidth (Int_t bin) const |
Return bin width for 1D histogram. More... | |
virtual Double_t | GetBinWithContent (Double_t c, Int_t &binx, Int_t firstx=0, Int_t lastx=0, Double_t maxdiff=0) const |
Compute first binx in the range [firstx,lastx] for which diff = abs(bin_content-c) <= maxdiff. More... | |
virtual void | GetBinXYZ (Int_t binglobal, Int_t &binx, Int_t &biny, Int_t &binz) const |
Return binx, biny, binz corresponding to the global bin number globalbin see TH1::GetBin function above. More... | |
const Double_t * | GetBuffer () const |
Int_t | GetBufferLength () const |
Int_t | GetBufferSize () const |
virtual Double_t | GetCellContent (Int_t binx, Int_t biny) const |
virtual Double_t | GetCellError (Int_t binx, Int_t biny) const |
virtual void | GetCenter (Double_t *center) const |
Fill array with center of bins for 1D histogram Better to use h1.GetXaxis().GetCenter(center) More... | |
virtual Int_t | GetContour (Double_t *levels=0) |
Return contour values into array levels if pointer levels is non zero. More... | |
virtual Double_t | GetContourLevel (Int_t level) const |
Return value of contour number level. More... | |
virtual Double_t | GetContourLevelPad (Int_t level) const |
Return the value of contour number "level" in Pad coordinates. More... | |
TH1 * | GetCumulative (Bool_t forward=kTRUE, const char *suffix="_cumulative") const |
Return a pointer to an histogram containing the cumulative The cumulative can be computed both in the forward (default) or backward direction; the name of the new histogram is constructed from the name of this histogram with the suffix suffix appended. More... | |
virtual Int_t | GetDimension () const |
TDirectory * | GetDirectory () const |
virtual Double_t | GetEffectiveEntries () const |
Number of effective entries of the histogram. More... | |
virtual Double_t | GetEntries () const |
Return the current number of entries. More... | |
virtual TF1 * | GetFunction (const char *name) const |
Return pointer to function with name. More... | |
virtual Double_t * | GetIntegral () |
Return a pointer to the array of bins integral. More... | |
virtual Double_t | GetKurtosis (Int_t axis=1) const |
virtual Color_t | GetLabelColor (Option_t *axis="X") const |
Return the "axis" label color. More... | |
virtual Style_t | GetLabelFont (Option_t *axis="X") const |
Return the "axis" label font. More... | |
virtual Float_t | GetLabelOffset (Option_t *axis="X") const |
Return the "axis" label offset. More... | |
virtual Float_t | GetLabelSize (Option_t *axis="X") const |
Return the "axis" label size. More... | |
TList * | GetListOfFunctions () const |
virtual void | GetLowEdge (Double_t *edge) const |
Fill array with low edge of bins for 1D histogram Better to use h1.GetXaxis().GetLowEdge(edge) More... | |
virtual Double_t | GetMaximum (Double_t maxval=FLT_MAX) const |
Return maximum value smaller than maxval of bins in the range, unless the value has been overridden by TH1::SetMaximum, in which case it returns that value. More... | |
virtual Int_t | GetMaximumBin () const |
Return location of bin with maximum value in the range. More... | |
virtual Int_t | GetMaximumBin (Int_t &locmax, Int_t &locmay, Int_t &locmaz) const |
Return location of bin with maximum value in the range. More... | |
virtual Double_t | GetMaximumStored () const |
virtual Double_t | GetMean (Int_t axis=1) const |
For axis = 1,2 or 3 returns the mean value of the histogram along X,Y or Z axis. More... | |
virtual Double_t | GetMeanError (Int_t axis=1) const |
Return standard error of mean of this histogram along the X axis. More... | |
virtual Double_t | GetMinimum (Double_t minval=-FLT_MAX) const |
Return minimum value larger than minval of bins in the range, unless the value has been overridden by TH1::SetMinimum, in which case it returns that value. More... | |
virtual void | GetMinimumAndMaximum (Double_t &min, Double_t &max) const |
Retrieve the minimum and maximum values in the histogram. More... | |
virtual Int_t | GetMinimumBin () const |
Return location of bin with minimum value in the range. More... | |
virtual Int_t | GetMinimumBin (Int_t &locmix, Int_t &locmiy, Int_t &locmiz) const |
Return location of bin with minimum value in the range. More... | |
virtual Double_t | GetMinimumStored () const |
virtual Int_t | GetNbinsX () const |
virtual Int_t | GetNbinsY () const |
virtual Int_t | GetNbinsZ () const |
virtual Int_t | GetNcells () const |
virtual Int_t | GetNdivisions (Option_t *axis="X") const |
Return the number of divisions for "axis". More... | |
virtual Double_t | GetNormFactor () const |
virtual char * | GetObjectInfo (Int_t px, Int_t py) const |
Redefines TObject::GetObjectInfo. More... | |
Option_t * | GetOption () const |
TVirtualHistPainter * | GetPainter (Option_t *option="") |
Return pointer to painter. More... | |
virtual Int_t | GetQuantiles (Int_t nprobSum, Double_t *q, const Double_t *probSum=0) |
Compute Quantiles for this histogram Quantile x_q of a probability distribution Function F is defined as. More... | |
virtual Double_t | GetRandom () const |
Return a random number distributed according the histogram bin contents. More... | |
Double_t | GetRMS (Int_t axis=1) const |
Double_t | GetRMSError (Int_t axis=1) const |
virtual Double_t | GetSkewness (Int_t axis=1) const |
EStatOverflows | GetStatOverflows () const |
virtual Double_t | GetStdDev (Int_t axis=1) const |
Returns the Standard Deviation (Sigma). More... | |
virtual Double_t | GetStdDevError (Int_t axis=1) const |
Return error of standard deviation estimation for Normal distribution. More... | |
virtual Double_t | GetSumOfWeights () const |
Return the sum of weights excluding under/overflows. More... | |
virtual TArrayD * | GetSumw2 () |
virtual const TArrayD * | GetSumw2 () const |
virtual Int_t | GetSumw2N () const |
virtual Float_t | GetTickLength (Option_t *axis="X") const |
Return the "axis" tick length. More... | |
virtual Style_t | GetTitleFont (Option_t *axis="X") const |
Return the "axis" title font. More... | |
virtual Float_t | GetTitleOffset (Option_t *axis="X") const |
Return the "axis" title offset. More... | |
virtual Float_t | GetTitleSize (Option_t *axis="X") const |
Return the "axis" title size. More... | |
TAxis * | GetXaxis () |
Get the behaviour adopted by the object about the statoverflows. See EStatOverflows for more information. More... | |
const TAxis * | GetXaxis () const |
TAxis * | GetYaxis () |
const TAxis * | GetYaxis () const |
TAxis * | GetZaxis () |
const TAxis * | GetZaxis () const |
virtual Double_t | Integral (Option_t *option="") const |
Return integral of bin contents. More... | |
virtual Double_t | Integral (Int_t binx1, Int_t binx2, Option_t *option="") const |
Return integral of bin contents in range [binx1,binx2]. More... | |
virtual Double_t | IntegralAndError (Int_t binx1, Int_t binx2, Double_t &err, Option_t *option="") const |
Return integral of bin contents in range [binx1,binx2] and its error. More... | |
virtual Double_t | Interpolate (Double_t x) |
Given a point x, approximates the value via linear interpolation based on the two nearest bin centers. More... | |
virtual Double_t | Interpolate (Double_t x, Double_t y) |
Interpolate. Not yet implemented. More... | |
virtual Double_t | Interpolate (Double_t x, Double_t y, Double_t z) |
Interpolate. Not yet implemented. More... | |
Bool_t | IsBinOverflow (Int_t bin, Int_t axis=0) const |
Return true if the bin is overflow. More... | |
Bool_t | IsBinUnderflow (Int_t bin, Int_t axis=0) const |
Return true if the bin is underflow. More... | |
virtual Double_t | KolmogorovTest (const TH1 *h2, Option_t *option="") const |
Statistical test of compatibility in shape between this histogram and h2, using Kolmogorov test. More... | |
virtual void | Paint (Option_t *option="") |
Control routine to paint any kind of histograms. More... | |
virtual void | Print (Option_t *option="") const |
Print some global quantities for this histogram. More... | |
virtual void | RebinAxis (Double_t x, TAxis *axis) |
virtual TH1 * | RebinX (Int_t ngroup=2, const char *newname="") |
virtual void | Rebuild (Option_t *option="") |
Using the current bin info, recompute the arrays for contents and errors. More... | |
virtual void | RecursiveRemove (TObject *obj) |
Recursively remove object from the list of functions. More... | |
virtual void | ResetStats () |
Reset the statistics including the number of entries and replace with values calculates from bin content. More... | |
virtual void | SetAxisColor (Color_t color=1, Option_t *axis="X") |
Set color to draw the axis line and tick marks. More... | |
virtual void | SetAxisRange (Double_t xmin, Double_t xmax, Option_t *axis="X") |
Set the "axis" range. More... | |
virtual void | SetBarOffset (Float_t offset=0.25) |
virtual void | SetBarWidth (Float_t width=0.5) |
virtual void | SetBinContent (Int_t bin, Double_t content) |
Set bin content see convention for numbering bins in TH1::GetBin In case the bin number is greater than the number of bins and the timedisplay option is set or CanExtendAllAxes(), the number of bins is automatically doubled to accommodate the new bin. More... | |
virtual void | SetBinContent (Int_t bin, Int_t, Double_t content) |
virtual void | SetBinContent (Int_t bin, Int_t, Int_t, Double_t content) |
virtual void | SetBinError (Int_t bin, Double_t error) |
Set the bin Error Note that this resets the bin eror option to be of Normal Type and for the non-empty bin the bin error is set by default to the square root of their content, but in case the user sets explicitly a new bin content (using SetBinContent) he needs to provide also the error, otherwise a default error = 0 is used. More... | |
virtual void | SetBinError (Int_t binx, Int_t biny, Double_t error) |
See convention for numbering bins in TH1::GetBin. More... | |
virtual void | SetBinError (Int_t binx, Int_t biny, Int_t binz, Double_t error) |
See convention for numbering bins in TH1::GetBin. More... | |
virtual void | SetBinErrorOption (EBinErrorOpt type) |
virtual UInt_t | SetCanExtend (UInt_t extendBitMask) |
Make the histogram axes extendable / not extendable according to the bit mask returns the previous bit mask specifying which axes are extendable. More... | |
virtual void | SetCellContent (Int_t binx, Int_t biny, Double_t content) |
virtual void | SetCellError (Int_t binx, Int_t biny, Double_t content) |
virtual void | SetContent (const Double_t *content) |
Replace bin contents by the contents of array content. More... | |
virtual void | SetContour (Int_t nlevels, const Double_t *levels=0) |
Set the number and values of contour levels. More... | |
virtual void | SetContourLevel (Int_t level, Double_t value) |
Set value for one contour level. More... | |
virtual void | SetDirectory (TDirectory *dir) |
By default when an histogram is created, it is added to the list of histogram objects in the current directory in memory. More... | |
virtual void | SetEntries (Double_t n) |
virtual void | SetError (const Double_t *error) |
Replace bin errors by values in array error. More... | |
virtual void | SetLabelColor (Color_t color=1, Option_t *axis="X") |
Set axis labels color. More... | |
virtual void | SetLabelFont (Style_t font=62, Option_t *axis="X") |
Set font number used to draw axis labels. More... | |
virtual void | SetLabelOffset (Float_t offset=0.005, Option_t *axis="X") |
Set offset between axis and axis' labels. More... | |
virtual void | SetLabelSize (Float_t size=0.02, Option_t *axis="X") |
Set size of axis' labels. More... | |
virtual void | SetMaximum (Double_t maximum=-1111) |
virtual void | SetMinimum (Double_t minimum=-1111) |
virtual void | SetName (const char *name) |
Change the name of this histogram. More... | |
virtual void | SetNameTitle (const char *name, const char *title) |
Change the name and title of this histogram. More... | |
virtual void | SetNdivisions (Int_t n=510, Option_t *axis="X") |
Set the number of divisions to draw an axis. More... | |
virtual void | SetNormFactor (Double_t factor=1) |
virtual void | SetOption (Option_t *option=" ") |
void | SetStatOverflows (EStatOverflows statOverflows) |
virtual void | SetStats (Bool_t stats=kTRUE) |
Set statistics option on/off. More... | |
virtual void | SetTickLength (Float_t length=0.02, Option_t *axis="X") |
Set the axis' tick marks length. More... | |
virtual void | SetTitle (const char *title) |
See GetStatOverflows for more information. More... | |
virtual void | SetTitleFont (Style_t font=62, Option_t *axis="X") |
Set the axis' title font. More... | |
virtual void | SetTitleOffset (Float_t offset=1, Option_t *axis="X") |
Specify a parameter offset to control the distance between the axis and the axis' title. More... | |
virtual void | SetTitleSize (Float_t size=0.02, Option_t *axis="X") |
Set the axis' title size. More... | |
virtual void | SetXTitle (const char *title) |
virtual void | SetYTitle (const char *title) |
virtual void | SetZTitle (const char *title) |
virtual TH1 * | ShowBackground (Int_t niter=20, Option_t *option="same") |
This function calculates the background spectrum in this histogram. More... | |
virtual Int_t | ShowPeaks (Double_t sigma=2, Option_t *option="", Double_t threshold=0.05) |
Interface to TSpectrum::Search. More... | |
virtual void | Smooth (Int_t ntimes=1, Option_t *option="") |
Smooth bin contents of this histogram. More... | |
void | UseCurrentStyle () |
Copy current attributes from/to current style. More... | |
Public Member Functions inherited from TNamed | |
TNamed () | |
TNamed (const char *name, const char *title) | |
TNamed (const TString &name, const TString &title) | |
TNamed (const TNamed &named) | |
TNamed copy ctor. More... | |
virtual | ~TNamed () |
TNamed destructor. More... | |
virtual void | Clear (Option_t *option="") |
Set name and title to empty strings (""). More... | |
virtual Int_t | Compare (const TObject *obj) const |
Compare two TNamed objects. More... | |
virtual void | FillBuffer (char *&buffer) |
Encode TNamed into output buffer. More... | |
virtual const char * | GetName () const |
Returns name of object. More... | |
virtual const char * | GetTitle () const |
Returns title of object. More... | |
virtual ULong_t | Hash () const |
Return hash value for this object. More... | |
virtual Bool_t | IsSortable () const |
virtual void | ls (Option_t *option="") const |
List TNamed name and title. More... | |
TNamed & | operator= (const TNamed &rhs) |
TNamed assignment operator. More... | |
virtual Int_t | Sizeof () const |
Return size of the TNamed part of the TObject. More... | |
Public Member Functions inherited from TObject | |
TObject () | |
TObject constructor. More... | |
TObject (const TObject &object) | |
TObject copy ctor. More... | |
virtual | ~TObject () |
TObject destructor. More... | |
void | AbstractMethod (const char *method) const |
Use this method to implement an "abstract" method that you don't want to leave purely abstract. More... | |
virtual void | AppendPad (Option_t *option="") |
Append graphics object to current pad. More... | |
ULong_t | CheckedHash () |
Checked and record whether for this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object. More... | |
virtual const char * | ClassName () const |
Returns name of class to which the object belongs. More... | |
virtual void | Delete (Option_t *option="") |
Delete this object. More... | |
virtual void | DrawClass () const |
Draw class inheritance tree of the class to which this object belongs. More... | |
virtual TObject * | DrawClone (Option_t *option="") const |
Draw a clone of this object in the current selected pad for instance with: gROOT->SetSelectedPad(gPad) . More... | |
virtual void | Dump () const |
Dump contents of object on stdout. More... | |
virtual void | Error (const char *method, const char *msgfmt,...) const |
Issue error message. More... | |
virtual void | Execute (const char *method, const char *params, Int_t *error=0) |
Execute method on this object with the given parameter string, e.g. More... | |
virtual void | Execute (TMethod *method, TObjArray *params, Int_t *error=0) |
Execute method on this object with parameters stored in the TObjArray. More... | |
virtual void | Fatal (const char *method, const char *msgfmt,...) const |
Issue fatal error message. More... | |
virtual Option_t * | GetDrawOption () const |
Get option used by the graphics system to draw this object. More... | |
virtual const char * | GetIconName () const |
Returns mime type name of object. More... | |
virtual UInt_t | GetUniqueID () const |
Return the unique object id. More... | |
virtual Bool_t | HandleTimer (TTimer *timer) |
Execute action in response of a timer timing out. More... | |
Bool_t | HasInconsistentHash () const |
Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e. More... | |
virtual void | Info (const char *method, const char *msgfmt,...) const |
Issue info message. More... | |
virtual Bool_t | InheritsFrom (const char *classname) const |
Returns kTRUE if object inherits from class "classname". More... | |
virtual Bool_t | InheritsFrom (const TClass *cl) const |
Returns kTRUE if object inherits from TClass cl. More... | |
virtual void | Inspect () const |
Dump contents of this object in a graphics canvas. More... | |
void | InvertBit (UInt_t f) |
virtual Bool_t | IsEqual (const TObject *obj) const |
Default equal comparison (objects are equal if they have the same address in memory). More... | |
virtual Bool_t | IsFolder () const |
Returns kTRUE in case object contains browsable objects (like containers or lists of other objects). More... | |
R__ALWAYS_INLINE Bool_t | IsOnHeap () const |
R__ALWAYS_INLINE Bool_t | IsZombie () const |
void | MayNotUse (const char *method) const |
Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary). More... | |
virtual Bool_t | Notify () |
This method must be overridden to handle object notification. More... | |
void | Obsolete (const char *method, const char *asOfVers, const char *removedFromVers) const |
Use this method to declare a method obsolete. More... | |
void | operator delete (void *ptr) |
Operator delete. More... | |
void | operator delete[] (void *ptr) |
Operator delete []. More... | |
void * | operator new (size_t sz) |
void * | operator new (size_t sz, void *vp) |
void * | operator new[] (size_t sz) |
void * | operator new[] (size_t sz, void *vp) |
TObject & | operator= (const TObject &rhs) |
TObject assignment operator. More... | |
virtual void | Pop () |
Pop on object drawn in a pad to the top of the display list. More... | |
virtual Int_t | Read (const char *name) |
Read contents of object with specified name from the current directory. More... | |
void | ResetBit (UInt_t f) |
virtual void | SaveAs (const char *filename="", Option_t *option="") const |
Save this object in the file specified by filename. More... | |
void | SetBit (UInt_t f, Bool_t set) |
Set or unset the user status bits as specified in f. More... | |
void | SetBit (UInt_t f) |
virtual void | SetDrawOption (Option_t *option="") |
Set drawing option for object. More... | |
virtual void | SetUniqueID (UInt_t uid) |
Set the unique object id. More... | |
virtual void | SysError (const char *method, const char *msgfmt,...) const |
Issue system error message. More... | |
R__ALWAYS_INLINE Bool_t | TestBit (UInt_t f) const |
Int_t | TestBits (UInt_t f) const |
virtual void | Warning (const char *method, const char *msgfmt,...) const |
Issue warning message. More... | |
virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) |
Write this object to the current directory. More... | |
virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) const |
Write this object to the current directory. More... | |
Public Member Functions inherited from TAttLine | |
TAttLine () | |
AttLine default constructor. More... | |
TAttLine (Color_t lcolor, Style_t lstyle, Width_t lwidth) | |
AttLine normal constructor. More... | |
virtual | ~TAttLine () |
AttLine destructor. More... | |
void | Copy (TAttLine &attline) const |
Copy this line attributes to a new TAttLine. More... | |
Int_t | DistancetoLine (Int_t px, Int_t py, Double_t xp1, Double_t yp1, Double_t xp2, Double_t yp2) |
Compute distance from point px,py to a line. More... | |
virtual Color_t | GetLineColor () const |
Return the line color. More... | |
virtual Style_t | GetLineStyle () const |
Return the line style. More... | |
virtual Width_t | GetLineWidth () const |
Return the line width. More... | |
virtual void | Modify () |
Change current line attributes if necessary. More... | |
virtual void | ResetAttLine (Option_t *option="") |
Reset this line attributes to default values. More... | |
virtual void | SaveLineAttributes (std::ostream &out, const char *name, Int_t coldef=1, Int_t stydef=1, Int_t widdef=1) |
Save line attributes as C++ statement(s) on output stream out. More... | |
virtual void | SetLineAttributes () |
Invoke the DialogCanvas Line attributes. More... | |
virtual void | SetLineColor (Color_t lcolor) |
Set the line color. More... | |
virtual void | SetLineColorAlpha (Color_t lcolor, Float_t lalpha) |
Set a transparent line color. More... | |
virtual void | SetLineStyle (Style_t lstyle) |
Set the line style. More... | |
virtual void | SetLineWidth (Width_t lwidth) |
Set the line width. More... | |
Public Member Functions inherited from TAttFill | |
TAttFill () | |
AttFill default constructor. More... | |
TAttFill (Color_t fcolor, Style_t fstyle) | |
AttFill normal constructor. More... | |
virtual | ~TAttFill () |
AttFill destructor. More... | |
void | Copy (TAttFill &attfill) const |
Copy this fill attributes to a new TAttFill. More... | |
virtual Color_t | GetFillColor () const |
Return the fill area color. More... | |
virtual Style_t | GetFillStyle () const |
Return the fill area style. More... | |
virtual Bool_t | IsTransparent () const |
virtual void | Modify () |
Change current fill area attributes if necessary. More... | |
virtual void | ResetAttFill (Option_t *option="") |
Reset this fill attributes to default values. More... | |
virtual void | SaveFillAttributes (std::ostream &out, const char *name, Int_t coldef=1, Int_t stydef=1001) |
Save fill attributes as C++ statement(s) on output stream out. More... | |
virtual void | SetFillAttributes () |
Invoke the DialogCanvas Fill attributes. More... | |
virtual void | SetFillColor (Color_t fcolor) |
Set the fill area color. More... | |
virtual void | SetFillColorAlpha (Color_t fcolor, Float_t falpha) |
Set a transparent fill color. More... | |
virtual void | SetFillStyle (Style_t fstyle) |
Set the fill area style. More... | |
Public Member Functions inherited from TAttMarker | |
TAttMarker () | |
TAttMarker default constructor. More... | |
TAttMarker (Color_t color, Style_t style, Size_t msize) | |
TAttMarker normal constructor. More... | |
virtual | ~TAttMarker () |
TAttMarker destructor. More... | |
void | Copy (TAttMarker &attmarker) const |
Copy this marker attributes to a new TAttMarker. More... | |
virtual Color_t | GetMarkerColor () const |
Return the marker color. More... | |
virtual Size_t | GetMarkerSize () const |
Return the marker size. More... | |
virtual Style_t | GetMarkerStyle () const |
Return the marker style. More... | |
virtual void | Modify () |
Change current marker attributes if necessary. More... | |
virtual void | ResetAttMarker (Option_t *toption="") |
Reset this marker attributes to the default values. More... | |
virtual void | SaveMarkerAttributes (std::ostream &out, const char *name, Int_t coldef=1, Int_t stydef=1, Int_t sizdef=1) |
Save line attributes as C++ statement(s) on output stream out. More... | |
virtual void | SetMarkerAttributes () |
Invoke the DialogCanvas Marker attributes. More... | |
virtual void | SetMarkerColor (Color_t mcolor=1) |
Set the marker color. More... | |
virtual void | SetMarkerColorAlpha (Color_t mcolor, Float_t malpha) |
Set a transparent marker color. More... | |
virtual void | SetMarkerSize (Size_t msize=1) |
Set the marker size. More... | |
virtual void | SetMarkerStyle (Style_t mstyle=1) |
Set the marker style. More... | |
Public Member Functions inherited from TArrayD | |
TArrayD () | |
Default TArrayD ctor. More... | |
TArrayD (Int_t n) | |
Create TArrayD object and set array size to n doubles. More... | |
TArrayD (Int_t n, const Double_t *array) | |
Create TArrayD object and initialize it with values of array. More... | |
TArrayD (const TArrayD &array) | |
Copy constructor. More... | |
virtual | ~TArrayD () |
Delete TArrayD object. More... | |
void | AddAt (Double_t c, Int_t i) |
Set the double c value at position i in the array. More... | |
void | Adopt (Int_t n, Double_t *array) |
Adopt array arr into TArrayD, i.e. More... | |
Double_t | At (Int_t i) const |
void | Copy (TArrayD &array) const |
const Double_t * | GetArray () const |
Double_t * | GetArray () |
Double_t | GetAt (Int_t i) const |
Stat_t | GetSum () const |
TArrayD & | operator= (const TArrayD &rhs) |
TArrayD assignment operator. More... | |
Double_t & | operator[] (Int_t i) |
Double_t | operator[] (Int_t i) const |
void | Reset () |
void | Reset (Double_t val) |
void | Set (Int_t n) |
Set size of this array to n doubles. More... | |
void | Set (Int_t n, const Double_t *array) |
Set size of this array to n doubles and set the contents This function should not be called if the array was declared via Adopt. More... | |
void | SetAt (Double_t v, Int_t i) |
Public Member Functions inherited from TArray | |
TArray () | |
TArray (Int_t n) | |
TArray (const TArray &a) | |
virtual | ~TArray () |
Int_t | GetSize () const |
TArray & | operator= (const TArray &rhs) |
Static Public Member Functions | |
static void | Approximate (Bool_t approx=kTRUE) |
Static function to set the fgApproximate flag. More... | |
Static Public Member Functions inherited from TH1 | |
static void | AddDirectory (Bool_t add=kTRUE) |
Sets the flag controlling the automatic add of histograms in memory. More... | |
static Bool_t | AddDirectoryStatus () |
Static function: cannot be inlined on Windows/NT. More... | |
static Int_t | FitOptionsMake (Option_t *option, Foption_t &Foption) |
Decode string choptin and fill fitOption structure. More... | |
static Int_t | GetDefaultBufferSize () |
Static function return the default buffer size for automatic histograms the parameter fgBufferSize may be changed via SetDefaultBufferSize. More... | |
static Bool_t | GetDefaultSumw2 () |
Return kTRUE if TH1::Sumw2 must be called when creating new histograms. More... | |
static void | SetDefaultBufferSize (Int_t buffersize=1000) |
Static function to set the default buffer size for automatic histograms. More... | |
static void | SetDefaultSumw2 (Bool_t sumw2=kTRUE) |
When this static function is called with sumw2=kTRUE , all new histograms will automatically activate the storage of the sum of squares of errors, ie TH1::Sumw2 is automatically called. More... | |
static void | SmoothArray (Int_t NN, Double_t *XX, Int_t ntimes=1) |
Smooth array xx, translation of Hbook routine hsmoof.F based on algorithm 353QH twice presented by J. More... | |
static void | StatOverflows (Bool_t flag=kTRUE) |
if flag=kTRUE, underflows and overflows are used by the Fill functions in the computation of statistics (mean value, StdDev). More... | |
static TH1 * | TransformHisto (TVirtualFFT *fft, TH1 *h_output, Option_t *option) |
For a given transform (first parameter), fills the histogram (second parameter) with the transform output data, specified in the third parameter If the 2nd parameter h_output is empty, a new histogram (TH1D or TH2D) is created and the user is responsible for deleting it. More... | |
Static Public Member Functions inherited from TObject | |
static Long_t | GetDtorOnly () |
Return destructor only flag. More... | |
static Bool_t | GetObjectStat () |
Get status of object stat flag. More... | |
static void | SetDtorOnly (void *obj) |
Set destructor only flag. More... | |
static void | SetObjectStat (Bool_t stat) |
Turn on/off tracking of objects in the TObjectTable. More... | |
Static Public Member Functions inherited from TArray | |
static TArray * | ReadArray (TBuffer &b, const TClass *clReq) |
Read TArray object from buffer. More... | |
static void | WriteArray (TBuffer &b, const TArray *a) |
Write TArray object to buffer. More... | |
Protected Member Functions | |
virtual Int_t | BufferFill (Double_t, Double_t) |
accumulate arguments in buffer. More... | |
virtual Int_t | BufferFill (Double_t x, Double_t y, Double_t w) |
accumulate arguments in buffer. More... | |
Int_t | Fill (const Double_t *v) |
virtual Double_t | GetBinErrorSqUnchecked (Int_t bin) const |
virtual Double_t | RetrieveBinContent (Int_t bin) const |
Raw retrieval of bin content on internal data structure see convention for numbering bins in TH1::GetBin. More... | |
void | SetBins (const Int_t *nbins, const Double_t *range) |
Protected Member Functions inherited from TH1D | |
virtual void | UpdateBinContent (Int_t bin, Double_t content) |
Raw update of bin content on internal data structure see convention for numbering bins in TH1::GetBin. More... | |
Protected Member Functions inherited from TH1 | |
TH1 () | |
Histogram default constructor. More... | |
TH1 (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup) | |
Normal constructor for fix bin size histograms. More... | |
TH1 (const char *name, const char *title, Int_t nbinsx, const Float_t *xbins) | |
Normal constructor for variable bin size histograms. More... | |
TH1 (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins) | |
Normal constructor for variable bin size histograms. More... | |
virtual Int_t | AutoP2FindLimits (Double_t min, Double_t max) |
Buffer-based estimate of the histogram range using the power of 2 algorithm. More... | |
virtual void | DoFillN (Int_t ntimes, const Double_t *x, const Double_t *w, Int_t stride=1) |
Internal method to fill histogram content from a vector called directly by TH1::BufferEmpty. More... | |
virtual Double_t | DoIntegral (Int_t ix1, Int_t ix2, Int_t iy1, Int_t iy2, Int_t iz1, Int_t iz2, Double_t &err, Option_t *opt, Bool_t doerr=kFALSE) const |
Internal function compute integral and optionally the error between the limits specified by the bin number values working for all histograms (1D, 2D and 3D) More... | |
virtual Bool_t | FindNewAxisLimits (const TAxis *axis, const Double_t point, Double_t &newMin, Double_t &newMax) |
finds new limits for the axis so that point is within the range and the limits are compatible with the previous ones (see TH1::Merge). More... | |
Bool_t | GetStatOverflowsBehaviour () const |
Bool_t | IsEmpty () const |
Check if an histogram is empty (this a protected method used mainly by TH1Merger ) More... | |
virtual void | SavePrimitiveHelp (std::ostream &out, const char *hname, Option_t *option="") |
Helper function for the SavePrimitive functions from TH1 or classes derived from TH1, eg TProfile, TProfile2D. More... | |
Protected Member Functions inherited from TObject | |
virtual void | DoError (int level, const char *location, const char *fmt, va_list va) const |
Interface to ErrorHandler (protected). More... | |
void | MakeZombie () |
Protected Member Functions inherited from TArray | |
Bool_t | BoundsOk (const char *where, Int_t at) const |
Bool_t | OutOfBoundsError (const char *where, Int_t i) const |
Generate an out-of-bounds error. Always returns false. More... | |
Protected Attributes | |
TArrayD | fBinEntries |
TArrayD | fBinSumw2 |
EErrorType | fErrorMode |
Bool_t | fScaling |
Double_t | fTsumwy |
True when TProfile::Scale is called. More... | |
Double_t | fTsumwy2 |
Double_t | fYmax |
Double_t | fYmin |
Protected Attributes inherited from TH1 | |
Short_t | fBarOffset |
(1000*offset) for bar charts or legos More... | |
Short_t | fBarWidth |
(1000*width) for bar charts or legos More... | |
EBinErrorOpt | fBinStatErrOpt |
option for bin statistical errors More... | |
Double_t * | fBuffer |
[fBufferSize] entry buffer More... | |
Int_t | fBufferSize |
fBuffer size More... | |
TArrayD | fContour |
Array to display contour levels. More... | |
Int_t | fDimension |
!Histogram dimension (1, 2 or 3 dim) More... | |
TDirectory * | fDirectory |
!Pointer to directory holding this histogram More... | |
Double_t | fEntries |
Number of entries. More... | |
TList * | fFunctions |
->Pointer to list of functions (fits and user) More... | |
Double_t * | fIntegral |
!Integral of bins used by GetRandom More... | |
Double_t | fMaximum |
Maximum value for plotting. More... | |
Double_t | fMinimum |
Minimum value for plotting. More... | |
Int_t | fNcells |
number of bins(1D), cells (2D) +U/Overflows More... | |
Double_t | fNormFactor |
Normalization factor. More... | |
TString | fOption |
histogram options More... | |
TVirtualHistPainter * | fPainter |
!pointer to histogram painter More... | |
EStatOverflows | fStatOverflows |
per object flag to use under/overflows in statistics More... | |
TArrayD | fSumw2 |
Array of sum of squares of weights. More... | |
Double_t | fTsumw |
Total Sum of weights. More... | |
Double_t | fTsumw2 |
Total Sum of squares of weights. More... | |
Double_t | fTsumwx |
Total Sum of weight*X. More... | |
Double_t | fTsumwx2 |
Total Sum of weight*X*X. More... | |
TAxis | fXaxis |
X axis descriptor. More... | |
TAxis | fYaxis |
Y axis descriptor. More... | |
TAxis | fZaxis |
Z axis descriptor. More... | |
Protected Attributes inherited from TNamed | |
TString | fName |
TString | fTitle |
Protected Attributes inherited from TAttLine | |
Color_t | fLineColor |
Line color. More... | |
Style_t | fLineStyle |
Line style. More... | |
Width_t | fLineWidth |
Line width. More... | |
Protected Attributes inherited from TAttFill | |
Color_t | fFillColor |
Fill area color. More... | |
Style_t | fFillStyle |
Fill area style. More... | |
Protected Attributes inherited from TAttMarker | |
Color_t | fMarkerColor |
Marker color. More... | |
Size_t | fMarkerSize |
Marker size. More... | |
Style_t | fMarkerStyle |
Marker style. More... | |
Static Protected Attributes | |
static Bool_t | fgApproximate = kFALSE |
Static Protected Attributes inherited from TH1 | |
static Bool_t | fgAddDirectory = kTRUE |
!flag to add histograms to the directory More... | |
static Int_t | fgBufferSize = 1000 |
!default buffer size for automatic histograms More... | |
static Bool_t | fgDefaultSumw2 = kFALSE |
!flag to call TH1::Sumw2 automatically at histogram creation time More... | |
static Bool_t | fgStatOverflows = kFALSE |
!flag to use under/overflows in statistics More... | |
Private Member Functions | |
Int_t | Fill (Double_t) |
Increment bin with abscissa X by 1. More... | |
void | FillN (Int_t, const Double_t *, const Double_t *, Int_t) |
Fill this histogram with an array x and weights w. More... | |
Double_t * | GetB () |
Double_t * | GetB2 () |
Double_t * | GetW () |
Double_t * | GetW2 () |
void | SetBins (Int_t, Double_t, Double_t, Int_t, Double_t, Double_t) |
Redefine x and y axis parameters. More... | |
void | SetBins (Int_t, const Double_t *, Int_t, const Double_t *) |
Redefine x and y axis parameters with variable bin sizes. More... | |
void | SetBins (Int_t, Double_t, Double_t, Int_t, Double_t, Double_t, Int_t, Double_t, Double_t) |
Redefine x, y and z axis parameters. More... | |
void | SetBins (Int_t, const Double_t *, Int_t, const Double_t *, Int_t, const Double_t *) |
Redefine x, y and z axis parameters with variable bin sizes. More... | |
Friends | |
class | TProfileHelper |
Additional Inherited Members | |
Public Types inherited from TH1 | |
enum | { kNoAxis = 0, kXaxis = BIT(0), kYaxis = BIT(1), kZaxis = BIT(2), kAllAxes = kXaxis | kYaxis | kZaxis } |
enum | { kNstat = 13 } |
enum | EBinErrorOpt { kNormal = 0, kPoisson = 1, kPoisson2 = 2 } |
enum | EStatOverflows { kIgnore = 0, kConsider = 1, kNeutral = 2 } |
Enumeration specifying the way to treat statoverflow. More... | |
enum | EStatusBits { kNoStats = BIT(9), kUserContour = BIT(10), kLogX = BIT(15), kIsZoomed = BIT(16), kNoTitle = BIT(17), kIsAverage = BIT(18), kIsNotW = BIT(19), kAutoBinPTwo = BIT(20) } |
Public Types inherited from TObject | |
enum | { kIsOnHeap = 0x01000000, kNotDeleted = 0x02000000, kZombie = 0x04000000, kInconsistent = 0x08000000, kBitMask = 0x00ffffff } |
enum | { kSingleKey = BIT(0), kOverwrite = BIT(1), kWriteDelete = BIT(2) } |
enum | EDeprecatedStatusBits { kObjInCanvas = BIT(3) } |
enum | EStatusBits { kCanDelete = BIT(0), kMustCleanup = BIT(3), kIsReferenced = BIT(4), kHasUUID = BIT(5), kCannotPick = BIT(6), kNoContextMenu = BIT(8), kInvalidObject = BIT(13) } |
Public Attributes inherited from TArrayD | |
Double_t * | fArray |
Public Attributes inherited from TArray | |
Int_t | fN |
Static Protected Member Functions inherited from TH1 | |
static Int_t | AutoP2GetBins (Int_t n) |
Auxilliary function to get the next power of 2 integer value larger then n. More... | |
static Double_t | AutoP2GetPower2 (Double_t x, Bool_t next=kTRUE) |
Auxilliary function to get the power of 2 next (larger) or previous (smaller) a given x. More... | |
static bool | CheckAxisLimits (const TAxis *a1, const TAxis *a2) |
Check that the axis limits of the histograms are the same. More... | |
static bool | CheckBinLabels (const TAxis *a1, const TAxis *a2) |
Check that axis have same labels. More... | |
static bool | CheckBinLimits (const TAxis *a1, const TAxis *a2) |
Check bin limits. More... | |
static bool | CheckConsistency (const TH1 *h1, const TH1 *h2) |
Check histogram compatibility. More... | |
static bool | CheckConsistentSubAxes (const TAxis *a1, Int_t firstBin1, Int_t lastBin1, const TAxis *a2, Int_t firstBin2=0, Int_t lastBin2=0) |
Check that two sub axis are the same. More... | |
static bool | CheckEqualAxes (const TAxis *a1, const TAxis *a2) |
Check that the axis are the same. More... | |
static Bool_t | RecomputeAxisLimits (TAxis &destAxis, const TAxis &anAxis) |
Finds new limits for the axis for the Merge function. More... | |
static Bool_t | SameLimitsAndNBins (const TAxis &axis1, const TAxis &axis2) |
Same limits and bins. More... | |
#include <TProfile.h>
TProfile::TProfile | ( | ) |
Default constructor for Profile histograms.
Definition at line 82 of file TProfile.cxx.
TProfile::TProfile | ( | const char * | name, |
const char * | title, | ||
Int_t | nbins, | ||
Double_t | xlow, | ||
Double_t | xup, | ||
Option_t * | option = "" |
||
) |
Normal Constructor for Profile histograms.
The first five parameters are similar to TH1D::TH1D. All values of y are accepted at filling time. To fill a profile histogram, one must use TProfile::Fill function.
Note that when filling the profile histogram the function Fill checks if the variable y is between fYmin and fYmax. If a minimum or maximum value is set for the Y scale before filling, then all values below ymin or above ymax will be discarded. Setting the minimum or maximum value for the Y scale before filling has the same effect as calling the special TProfile constructor below where ymin and ymax are specified.
H(J) is printed as the channel contents. The errors displayed are s(J) if CHOPT='S' (spread option), or e(J) if CHOPT=' ' (error on mean).
See TProfile::BuildOptions for explanation of parameters
see also comments in the TH1 base class constructors
Definition at line 116 of file TProfile.cxx.
TProfile::TProfile | ( | const char * | name, |
const char * | title, | ||
Int_t | nbins, | ||
Double_t | xlow, | ||
Double_t | xup, | ||
Double_t | ylow, | ||
Double_t | yup, | ||
Option_t * | option = "" |
||
) |
Constructor for Profile histograms with range in y.
The first five parameters are similar to TH1D::TH1D. Only the values of Y between ylow and yup will be considered at filling time. ylow and yup will also be the maximum and minimum values on the y scale when drawing the profile.
See TProfile::BuildOptions for more explanations on errors
see also comments in the TH1 base class constructors
Definition at line 170 of file TProfile.cxx.
TProfile::TProfile | ( | const char * | name, |
const char * | title, | ||
Int_t | nbins, | ||
const Float_t * | xbins, | ||
Option_t * | option = "" |
||
) |
Constructor for Profile histograms with variable bin size.
See TProfile::BuildOptions for more explanations on errors see also comments in the TH1 base class constructors
Definition at line 128 of file TProfile.cxx.
TProfile::TProfile | ( | const char * | name, |
const char * | title, | ||
Int_t | nbins, | ||
const Double_t * | xbins, | ||
Option_t * | option = "" |
||
) |
Constructor for Profile histograms with variable bin size.
See TProfile::BuildOptions for more explanations on errors see also comments in the TH1 base class constructors
Definition at line 140 of file TProfile.cxx.
TProfile::TProfile | ( | const char * | name, |
const char * | title, | ||
Int_t | nbins, | ||
const Double_t * | xbins, | ||
Double_t | ylow, | ||
Double_t | yup, | ||
Option_t * | option = "" |
||
) |
Constructor for Profile histograms with variable bin size.
See TProfile::BuildOptions for more explanations on errors
see also comments in the TH1 base class constructors
Definition at line 152 of file TProfile.cxx.
TProfile::TProfile | ( | const TProfile & | profile | ) |
Copy constructor.
Definition at line 234 of file TProfile.cxx.
|
virtual |
Default destructor for Profile histograms.
Definition at line 90 of file TProfile.cxx.
Performs the operation: this = this + c1*f1.
Reimplemented from TH1.
Definition at line 242 of file TProfile.cxx.
Performs the operation: this = this + c1*h1.
Reimplemented from TH1.
Definition at line 252 of file TProfile.cxx.
Replace contents of this profile by the addition of h1 and h2.
this = c1*h1 + c2*h2
c1 and c2 are considered as weights applied to the two summed profiles. The operation acts therefore like merging the two profiles with a weight c1 and c2
Reimplemented from TH1.
Definition at line 274 of file TProfile.cxx.
Static function to set the fgApproximate flag.
When the flag is true, the function GetBinError will approximate the bin error with the average profile error on all bins in the following situation only
Definition at line 304 of file TProfile.cxx.
Fill histogram with all entries in the buffer.
Reimplemented from TH1.
Definition at line 318 of file TProfile.cxx.
accumulate arguments in buffer.
When buffer is full, empty the buffer
fBuffer[0]
= number of entries in bufferfBuffer[1]
= w of first entryfBuffer[2]
= x of first entry Reimplemented from TH1.
Definition at line 49 of file TProfile.h.
accumulate arguments in buffer.
When buffer is full, empty the buffer.
Definition at line 376 of file TProfile.cxx.
Set Profile histogram structure and options.
[in] | ymin | minimum value allowed for y |
[in] | ymax | maximum value allowed for y if (ymin = ymax = 0) there are no limits on the allowed y values (ymin = -inf, ymax = +inf) |
[in] | option | this is the option for the computation of the y error of the profile ( TProfile::GetBinError ) possible values for the options are:
|
In the case of Profile filled weights and with TProfile::Sumw2() called, STD(Y) is the standard deviation of the weighted sample Y and N is in this case the number of effective entries (TProfile::GetBinEffectiveEntries(ibin) )
If a bin has N data points all with the same value Y (especially possible when dealing with integers), the spread in Y for that bin is zero, and the uncertainty assigned is also zero, and the bin is ignored in making subsequent fits. To avoid this problem one can use an approximation for the standard deviation S(Y), by using the average of all the S(Y) of the other Profile bins. To use this approximation one must call before TProfile::Approximate This approximation applies only for the default and the 's' options
Definition at line 217 of file TProfile.cxx.
Copy a Profile histogram to a new profile histogram.
Reimplemented from TH1D.
Definition at line 403 of file TProfile.cxx.
Performs the operation: this = this/(c1*f1)
.
This function is not implemented for the TProfile
Reimplemented from TH1.
Definition at line 433 of file TProfile.cxx.
Divide this profile by h1.
this = this/h1
This function accepts to divide a TProfile by a histogram
The function return kFALSE if the divide operation failed
Reimplemented from TH1.
Definition at line 448 of file TProfile.cxx.
|
virtual |
Replace contents of this profile by the division of h1 by h2.
this = c1*h1/(c2*h2)
The function return kFALSE if the divide operation failed
Reimplemented from TH1.
Definition at line 527 of file TProfile.cxx.
Profile histogram is resized along x axis such that x is in the axis range.
The new axis limits are recomputed by doubling iteratively the current axis range until the specified value x is within the limits. The algorithm makes a copy of the histogram, then loops on all bins of the old histogram to fill the extended histogram. Takes into account errors (Sumw2) if any. The axis must be extendable before invoking this function.
Ex: h->GetXaxis()->SetCanExtend(kTRUE)
Reimplemented from TH1.
Definition at line 1503 of file TProfile.cxx.
Definition at line 54 of file TProfile.h.
Increment bin with abscissa X by 1.
if x is less than the low-edge of the first bin, the Underflow bin is incremented if x is greater than the upper edge of last bin, the Overflow bin is incremented
If the storage of the sum of squares of weights has been triggered, via the function Sumw2, then the sum of the squares of weights is incremented by 1 in the bin corresponding to x.
The function returns the corresponding bin number which has its content incremented by 1
Reimplemented from TH1.
Definition at line 61 of file TProfile.h.
Fill a Profile histogram (no weights).
Reimplemented from TH1.
Definition at line 630 of file TProfile.cxx.
Fill a Profile histogram (no weights).
Reimplemented from TH1.
Definition at line 660 of file TProfile.cxx.
Fill a Profile histogram with weights.
Definition at line 689 of file TProfile.cxx.
Fill a Profile histogram with weights.
Definition at line 721 of file TProfile.cxx.
|
inlineprivatevirtual |
Fill this histogram with an array x and weights w.
[in] | ntimes | number of entries in arrays x and w (array size must be ntimes*stride) |
[in] | x | array of values to be histogrammed |
[in] | w | array of weighs |
[in] | stride | step size through arrays x and w |
If the weight is not equal to 1, the storage of the sum of squares of weights is automatically triggered and the sum of the squares of weights is incremented by \( w^2 \) in the bin corresponding to x. if w is NULL each entry is assumed a weight=1
Reimplemented from TH1.
Definition at line 62 of file TProfile.h.
|
virtual |
Fill a Profile histogram with weights.
Reimplemented from TH1.
Definition at line 753 of file TProfile.cxx.
|
inlineprivate |
Definition at line 63 of file TProfile.h.
|
inlineprivate |
Definition at line 64 of file TProfile.h.
Return bin content of a Profile histogram.
Reimplemented from TH1.
Definition at line 801 of file TProfile.cxx.
Reimplemented from TH1.
Definition at line 102 of file TProfile.h.
Reimplemented from TH1.
Definition at line 103 of file TProfile.h.
Return bin effective entries for a weighted filled Profile histogram.
In case of an unweighted profile, it is equivalent to the number of entries per bin The effective entries is defined as the square of the sum of the weights divided by the sum of the weights square. TProfile::Sumw2() must be called before filling the profile with weights. Only by calling this method the sum of the square of the weights per bin is stored.
Definition at line 830 of file TProfile.cxx.
Return bin entries of a Profile histogram.
Definition at line 814 of file TProfile.cxx.
Return bin error of a Profile histogram.
Computing errors: A moving field
The computation of errors for a TProfile has evolved with the versions of ROOT. The difficulty is in computing errors for bins with low statistics.
Ideas for improvements of this algorithm are welcome. No suggestions received since our call for advice to roottalk in Jul 2002. see for instance: http://root.cern.ch/root/roottalk/roottalk02/2916.html
Reimplemented from TH1.
Definition at line 865 of file TProfile.cxx.
Reimplemented from TH1.
Definition at line 105 of file TProfile.h.
Reimplemented from TH1.
Definition at line 106 of file TProfile.h.
Reimplemented from TH1.
Definition at line 58 of file TProfile.h.
|
inlinevirtual |
Definition at line 109 of file TProfile.h.
|
inlinevirtual |
Definition at line 110 of file TProfile.h.
Option_t * TProfile::GetErrorOption | ( | ) | const |
Return option to compute profile errors.
Definition at line 873 of file TProfile.cxx.
fill the array stats from the contents of this profile.
The array stats must be correctly dimensioned in the calling program.
If no axis-subrange is specified (via TAxis::SetRange), the array stats is simply a copy of the statistics quantities computed at filling time. If a sub-range is specified, the function recomputes these quantities from the bin contents in the current axis range.
Reimplemented from TH1.
Definition at line 898 of file TProfile.cxx.
|
inlineprivate |
Definition at line 65 of file TProfile.h.
|
inlineprivate |
Definition at line 66 of file TProfile.h.
|
inlinevirtual |
Definition at line 114 of file TProfile.h.
|
inlinevirtual |
Definition at line 113 of file TProfile.h.
Reduce the number of bins for this axis to the number of bins having a label.
Reimplemented from TH1.
Definition at line 946 of file TProfile.cxx.
Double the number of bins for axis.
Refill histogram This function is called by TAxis::FindBin(const char *label)
Reimplemented from TH1.
Definition at line 956 of file TProfile.cxx.
Set option(s) to draw axis with labels.
option might have the following values:
Reimplemented from TH1.
Definition at line 974 of file TProfile.cxx.
|
virtual |
Merge all histograms in the collection in this histogram.
This function computes the min/max for the x axis, compute a new number of bins, if necessary, add bin contents, errors and statistics. If overflows are present and limits are different the function will fail. The function returns the total number of entries in the result histogram if the merge is successfull, -1 otherwise.
IMPORTANT remark. The axis x may have different number of bins and different limits, BUT the largest bin width must be a multiple of the smallest bin width and the upper limit must also be a multiple of the bin width.
Reimplemented from TH1.
Definition at line 1112 of file TProfile.cxx.
Performs the operation: this = this*c1*f1.
The function return kFALSE if the Multiply operation failed
Reimplemented from TH1.
Definition at line 1122 of file TProfile.cxx.
Multiply this profile by h1.
this = this*h1
Reimplemented from TH1.
Definition at line 1164 of file TProfile.cxx.
|
virtual |
Replace contents of this profile by multiplication of h1 by h2.
this = (c1*h1)*(c2*h2)
Reimplemented from TH1.
Definition at line 1176 of file TProfile.cxx.
Project this profile into a 1-D histogram along X.
The projection is always of the type TH1D.
Definition at line 1203 of file TProfile.cxx.
Replace current statistics with the values in array stats.
Reimplemented from TH1.
Definition at line 1278 of file TProfile.cxx.
|
virtual |
Rebin this profile grouping ngroup bins together.
if newname is not blank a new temporary profile hnew is created. else the current profile is modified (default) The parameter ngroup indicates how many bins of this have to me merged into one bin of hnew If the original profile has errors stored (via Sumw2), the resulting profile has new errors correctly calculated.
examples: if hp is an existing TProfile histogram with 100 bins
NOTE: If ngroup is not an exact divider of the number of bins, the top limit of the rebinned profile is changed to the upper edge of the bin=newbins*ngroup and the corresponding bins are added to the overflow bin. Statistics will be recomputed from the new bin contents.
a new profile is created (you should specify newname). The parameter ngroup is the number of variable size bins in the created profile The array xbins must contain ngroup+1 elements that represent the low-edge of the bins. The data of the old bins are added to the new bin which contains the bin center of the old bins. It is possible that information from the old binning are attached to the under-/overflow bins of the new binning.
examples: if hp is an existing TProfile with 100 bins
Reimplemented from TH1.
Definition at line 1330 of file TProfile.cxx.
Reset contents of a Profile histogram.
Reimplemented from TH1D.
Definition at line 1517 of file TProfile.cxx.
Raw retrieval of bin content on internal data structure see convention for numbering bins in TH1::GetBin.
Reimplemented from TH1D.
Definition at line 56 of file TProfile.h.
Save primitive as a C++ statement(s) on output stream out.
Reimplemented from TH1.
Definition at line 1532 of file TProfile.cxx.
Multiply this profile by a constant c1.
this = c1*this
This function uses the services of TProfile::Add
Reimplemented from TH1.
Definition at line 1612 of file TProfile.cxx.
Set the number of entries in bin.
Definition at line 1620 of file TProfile.cxx.
Definition at line 53 of file TProfile.h.
|
inlineprivatevirtual |
Redefine x and y axis parameters.
The X and Y axis parameters are modified. The bins content array is resized if errors (Sumw2) the errors array is resized The previous bin contents are lost To change only the axis limits, see TAxis::SetRange
Reimplemented from TH1.
Definition at line 67 of file TProfile.h.
|
inlineprivatevirtual |
Redefine x and y axis parameters with variable bin sizes.
The X and Y axis parameters are modified. The bins content array is resized if errors (Sumw2) the errors array is resized The previous bin contents are lost To change only the axis limits, see TAxis::SetRange xBins is supposed to be of length nx+1, yBins is supposed to be of length ny+1
Reimplemented from TH1.
Definition at line 69 of file TProfile.h.
|
inlineprivatevirtual |
Redefine x, y and z axis parameters.
The X, Y and Z axis parameters are modified. The bins content array is resized if errors (Sumw2) the errors array is resized The previous bin contents are lost To change only the axis limits, see TAxis::SetRange
Reimplemented from TH1.
Definition at line 71 of file TProfile.h.
|
inlineprivatevirtual |
Redefine x, y and z axis parameters with variable bin sizes.
The X, Y and Z axis parameters are modified. The bins content array is resized if errors (Sumw2) the errors array is resized The previous bin contents are lost To change only the axis limits, see TAxis::SetRange xBins is supposed to be of length nx+1, yBins is supposed to be of length ny+1, zBins is supposed to be of length nz+1
Reimplemented from TH1.
Definition at line 73 of file TProfile.h.
Set total number of bins including under/overflow.
Reallocate bin contents array
Reimplemented from TH1D.
Definition at line 1649 of file TProfile.cxx.
Set the buffer size in units of 8 bytes (double).
Reimplemented from TH1.
Definition at line 1658 of file TProfile.cxx.
Set option to compute profile errors.
The computation of the bin errors is based on the parameter option:
-' ' (Default) The bin errors are the standard error on the mean of the bin profiled values (Y), i.e. the standard error of the bin contents. Note that if TProfile::Approximate() is called, an approximation is used when the spread in Y is 0 and the number of bin entries is > 0 -'s' The bin errors are the standard deviations of the Y bin values Note that if TProfile::Approximate() is called, an approximation is used when the spread in Y is 0 and the number of bin entries is > 0 -'i' Errors are as in default case (standard errors of the bin contents) The only difference is for the case when the spread in Y is zero. In this case for N > 0 the error is 1./SQRT(12.*N) -'g' Errors are 1./SQRT(W) for W not equal to 0 and 0 for W = 0. W is the sum in the bin of the weights of the profile. This option is for combining measurements y +/- dy, and the profile is filled with values y and weights w = 1/dy**2
See TProfile::BuildOptions for a detailed explanation of all options
Definition at line 1697 of file TProfile.cxx.
Create/delete structure to store sum of squares of weights per bin.
This is needed to compute the correct statistical quantities of a profile filled with weights
This function is automatically called when the histogram is created if the static function TH1::SetDefaultSumw2 has been called before. If flag is false the structure is deleted
Reimplemented from TH1.
Definition at line 1745 of file TProfile.cxx.
|
friend |
Definition at line 35 of file TProfile.h.
|
protected |
Definition at line 38 of file TProfile.h.
|
protected |
Definition at line 45 of file TProfile.h.
|
protected |
Definition at line 39 of file TProfile.h.
Definition at line 47 of file TProfile.h.
|
protected |
Definition at line 42 of file TProfile.h.
|
protected |
True when TProfile::Scale is called.
Definition at line 43 of file TProfile.h.
|
protected |
Definition at line 44 of file TProfile.h.
|
protected |
Definition at line 41 of file TProfile.h.
|
protected |
Definition at line 40 of file TProfile.h.