TGeoCone.cxx

Go to the documentation of this file.

// @(#)root/geom:$Id$
// Author: Andrei Gheata   31/01/02
// TGeoCone::Contains() and DistFromInside() implemented by Mihaela Gheata
 
/*************************************************************************
 * Copyright (C) 1995-2000, Rene Brun and Fons Rademakers.               *
 * All rights reserved.                                                  *
 *                                                                       *
 * For the licensing terms see $ROOTSYS/LICENSE.                         *
 * For the list of contributors see $ROOTSYS/README/CREDITS.             *
 *************************************************************************/
 
/** \class TGeoCone
\ingroup Cones
 
The cones are defined by 5 parameters:
 
~~~{.cpp}
TGeoCone(Double_t dz,Double_t rmin1,Double_t rmax1,
Double_t rmin2,Double_t rmax2);
~~~
 
  - `rmin1:` internal radius at Z is `-dz`
  - `rmax1:` external radius at Z is `-dz`
  - `rmin2:` internal radius at Z is `+dz`
  - `rmax2:` external radius at Z is `+dz`
  - `dz:` half length in Z (a cone ranges from `-dz` to +`dz`)
 
A cone has Z-axis as its symmetry axis.
 
Begin_Macro
{
   TCanvas *c = new TCanvas("c", "c",0,0,600,600);
   new TGeoManager("cone", "poza4");
   TGeoMaterial *mat = new TGeoMaterial("Al", 26.98,13,2.7);
   TGeoMedium *med = new TGeoMedium("MED",1,mat);
   TGeoVolume *top = gGeoManager->MakeBox("TOP",med,100,100,100);
   gGeoManager->SetTopVolume(top);
   TGeoVolume *vol = gGeoManager->MakeCone("CONE",med, 40,10,20,35,45);
   vol->SetLineWidth(2);
   top->AddNode(vol,1);
   gGeoManager->CloseGeometry();
   gGeoManager->SetNsegments(30);
   top->Draw();
   TView *view = gPad->GetView();
   view->ShowAxis();
}
End_Macro
*/
 
/** \class TGeoConeSeg
\ingroup Cones
 
A cone segment is a cone having a range in `phi`. The cone segment class
derives from **`TGeoCone`**, having two extra parameters: `phi1` and
`phi2`.
 
~~~{.cpp}
TGeoConeSeg(Double_t dz,Double_t rmin1,Double_t rmax1,
Double_t rmin2,Double_t rmax2,Double_t phi1,Double_t phi2);
~~~
 
Parameters `phi1` and `phi2` have the same meaning and convention as for
tube segments.
 
Begin_Macro
{
   TCanvas *c = new TCanvas("c", "c",0,0,600,600);
   new TGeoManager("coneseg", "poza5");
   TGeoMaterial *mat = new TGeoMaterial("Al", 26.98,13,2.7);
   TGeoMedium *med = new TGeoMedium("MED",1,mat);
   TGeoVolume *top = gGeoManager->MakeBox("TOP",med,100,100,100);
   gGeoManager->SetTopVolume(top);
   TGeoVolume *vol = gGeoManager->MakeCons("CONESEG",med, 40,30,40,10,20,-30,250);
   top->AddNode(vol,1);
   gGeoManager->CloseGeometry();
   gGeoManager->SetNsegments(30);
   top->Draw();
   TView *view = gPad->GetView();
   view->ShowAxis();
}
End_Macro
*/
 
#include <iostream>
 
#include "TGeoManager.h"
#include "TGeoVolume.h"
#include "TVirtualGeoPainter.h"
#include "TGeoCone.h"
#include "TBuffer3D.h"
#include "TBuffer3DTypes.h"
#include "TMath.h"
 
ClassImp(TGeoCone);
 
////////////////////////////////////////////////////////////////////////////////
/// Default constructor
 
TGeoCone::TGeoCone()
{
   SetShapeBit(TGeoShape::kGeoCone);
   fDz = 0.0;
   fRmin1 = 0.0;
   fRmax1 = 0.0;
   fRmin2 = 0.0;
   fRmax2 = 0.0;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Default constructor specifying minimum and maximum radius
 
TGeoCone::TGeoCone(Double_t dz, Double_t rmin1, Double_t rmax1, Double_t rmin2, Double_t rmax2) : TGeoBBox(0, 0, 0)
{
   SetShapeBit(TGeoShape::kGeoCone);
   SetConeDimensions(dz, rmin1, rmax1, rmin2, rmax2);
   if ((dz < 0) || (rmin1 < 0) || (rmax1 < 0) || (rmin2 < 0) || (rmax2 < 0)) {
      SetShapeBit(kGeoRunTimeShape);
   } else
      ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// Default constructor specifying minimum and maximum radius
 
TGeoCone::TGeoCone(const char *name, Double_t dz, Double_t rmin1, Double_t rmax1, Double_t rmin2, Double_t rmax2)
   : TGeoBBox(name, 0, 0, 0)
{
   SetShapeBit(TGeoShape::kGeoCone);
   SetConeDimensions(dz, rmin1, rmax1, rmin2, rmax2);
   if ((dz < 0) || (rmin1 < 0) || (rmax1 < 0) || (rmin2 < 0) || (rmax2 < 0)) {
      SetShapeBit(kGeoRunTimeShape);
   } else
      ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// Default constructor specifying minimum and maximum radius
///  - param[0] = dz
///  - param[1] = Rmin1
///  - param[2] = Rmax1
///  - param[3] = Rmin2
///  - param[4] = Rmax2
 
TGeoCone::TGeoCone(Double_t *param) : TGeoBBox(0, 0, 0)
{
   SetShapeBit(TGeoShape::kGeoCone);
   SetDimensions(param);
   if ((fDz < 0) || (fRmin1 < 0) || (fRmax1 < 0) || (fRmin2 < 0) || (fRmax2 < 0))
      SetShapeBit(kGeoRunTimeShape);
   else
      ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// Computes capacity of the shape in [length^3]
 
Double_t TGeoCone::Capacity() const
{
   return TGeoCone::Capacity(fDz, fRmin1, fRmax1, fRmin2, fRmax2);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Computes capacity of the shape in [length^3]
 
Double_t TGeoCone::Capacity(Double_t dz, Double_t rmin1, Double_t rmax1, Double_t rmin2, Double_t rmax2)
{
   Double_t capacity = (2. * dz * TMath::Pi() / 3.) *
                       (rmax1 * rmax1 + rmax2 * rmax2 + rmax1 * rmax2 - rmin1 * rmin1 - rmin2 * rmin2 - rmin1 * rmin2);
   return capacity;
}
 
////////////////////////////////////////////////////////////////////////////////
/// destructor
 
TGeoCone::~TGeoCone() {}
 
////////////////////////////////////////////////////////////////////////////////
/// compute bounding box of the sphere
 
void TGeoCone::ComputeBBox()
{
   TGeoBBox *box = (TGeoBBox *)this;
   box->SetBoxDimensions(TMath::Max(fRmax1, fRmax2), TMath::Max(fRmax1, fRmax2), fDz);
   memset(fOrigin, 0, 3 * sizeof(Double_t));
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute normal to closest surface from POINT.
 
void TGeoCone::ComputeNormal(const Double_t *point, const Double_t *dir, Double_t *norm)
{
   Double_t safr, safe, phi;
   memset(norm, 0, 3 * sizeof(Double_t));
   phi = TMath::ATan2(point[1], point[0]);
   Double_t cphi = TMath::Cos(phi);
   Double_t sphi = TMath::Sin(phi);
   Double_t ro1 = 0.5 * (fRmin1 + fRmin2);
   Double_t tg1 = 0.5 * (fRmin2 - fRmin1) / fDz;
   Double_t cr1 = 1. / TMath::Sqrt(1. + tg1 * tg1);
   Double_t ro2 = 0.5 * (fRmax1 + fRmax2);
   Double_t tg2 = 0.5 * (fRmax2 - fRmax1) / fDz;
   Double_t cr2 = 1. / TMath::Sqrt(1. + tg2 * tg2);
 
   Double_t r = TMath::Sqrt(point[0] * point[0] + point[1] * point[1]);
   Double_t rin = tg1 * point[2] + ro1;
   Double_t rout = tg2 * point[2] + ro2;
   safe = TMath::Abs(fDz - TMath::Abs(point[2]));
   norm[2] = 1;
 
   safr = (ro1 > 0) ? (TMath::Abs((r - rin) * cr1)) : TGeoShape::Big();
   if (safr < safe) {
      safe = safr;
      norm[0] = cr1 * cphi;
      norm[1] = cr1 * sphi;
      norm[2] = -tg1 * cr1;
   }
   safr = TMath::Abs((rout - r) * cr2);
   if (safr < safe) {
      norm[0] = cr2 * cphi;
      norm[1] = cr2 * sphi;
      norm[2] = -tg2 * cr2;
   }
   if (norm[0] * dir[0] + norm[1] * dir[1] + norm[2] * dir[2] < 0) {
      norm[0] = -norm[0];
      norm[1] = -norm[1];
      norm[2] = -norm[2];
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute normal to closest surface from POINT.
 
void TGeoCone::ComputeNormalS(const Double_t *point, const Double_t *dir, Double_t *norm, Double_t dz, Double_t rmin1,
                              Double_t rmax1, Double_t rmin2, Double_t rmax2)
{
   Double_t safe, phi;
   memset(norm, 0, 3 * sizeof(Double_t));
   phi = TMath::ATan2(point[1], point[0]);
   Double_t cphi = TMath::Cos(phi);
   Double_t sphi = TMath::Sin(phi);
   Double_t ro1 = 0.5 * (rmin1 + rmin2);
   Double_t tg1 = 0.5 * (rmin2 - rmin1) / dz;
   Double_t cr1 = 1. / TMath::Sqrt(1. + tg1 * tg1);
   Double_t ro2 = 0.5 * (rmax1 + rmax2);
   Double_t tg2 = 0.5 * (rmax2 - rmax1) / dz;
   Double_t cr2 = 1. / TMath::Sqrt(1. + tg2 * tg2);
 
   Double_t r = TMath::Sqrt(point[0] * point[0] + point[1] * point[1]);
   Double_t rin = tg1 * point[2] + ro1;
   Double_t rout = tg2 * point[2] + ro2;
   safe = (ro1 > 0) ? (TMath::Abs((r - rin) * cr1)) : TGeoShape::Big();
   norm[0] = cr1 * cphi;
   norm[1] = cr1 * sphi;
   norm[2] = -tg1 * cr1;
   if (TMath::Abs((rout - r) * cr2) < safe) {
      norm[0] = cr2 * cphi;
      norm[1] = cr2 * sphi;
      norm[2] = -tg2 * cr2;
   }
   if (norm[0] * dir[0] + norm[1] * dir[1] + norm[2] * dir[2] < 0) {
      norm[0] = -norm[0];
      norm[1] = -norm[1];
      norm[2] = -norm[2];
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// test if point is inside this cone
 
Bool_t TGeoCone::Contains(const Double_t *point) const
{
   if (TMath::Abs(point[2]) > fDz)
      return kFALSE;
   Double_t r2 = point[0] * point[0] + point[1] * point[1];
   Double_t rl = 0.5 * (fRmin2 * (point[2] + fDz) + fRmin1 * (fDz - point[2])) / fDz;
   Double_t rh = 0.5 * (fRmax2 * (point[2] + fDz) + fRmax1 * (fDz - point[2])) / fDz;
   if ((r2 < rl * rl) || (r2 > rh * rh))
      return kFALSE;
   return kTRUE;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from inside point to surface of the cone (static)
/// Boundary safe algorithm.
 
Double_t TGeoCone::DistFromInsideS(const Double_t *point, const Double_t *dir, Double_t dz, Double_t rmin1,
                                   Double_t rmax1, Double_t rmin2, Double_t rmax2)
{
   if (dz <= 0)
      return TGeoShape::Big();
   // compute distance to surface
   // Do Z
   Double_t sz = TGeoShape::Big();
   if (dir[2]) {
      sz = (TMath::Sign(dz, dir[2]) - point[2]) / dir[2];
      if (sz <= 0)
         return 0.0;
   }
   Double_t rsq = point[0] * point[0] + point[1] * point[1];
   Double_t zinv = 1. / dz;
   Double_t rin = 0.5 * (rmin1 + rmin2 + (rmin2 - rmin1) * point[2] * zinv);
   // Do Rmin
   Double_t b, delta, zi;
   if (rin > 0) {
      // Protection in case point is actually outside the cone
      if (rsq < rin * (rin + TGeoShape::Tolerance())) {
         Double_t ddotn =
            point[0] * dir[0] + point[1] * dir[1] + 0.5 * (rmin1 - rmin2) * dir[2] * zinv * TMath::Sqrt(rsq);
         if (ddotn <= 0)
            return 0.0;
      } else {
         TGeoCone::DistToCone(point, dir, dz, rmin1, rmin2, b, delta);
         if (delta > 0) {
            Double_t sr = -b - delta;
            if (sr > 0) {
               zi = point[2] + sr * dir[2];
               if (TMath::Abs(zi) <= dz)
                  return TMath::Min(sz, sr);
            }
            sr = -b + delta;
            if (sr > 0) {
               zi = point[2] + sr * dir[2];
               if (TMath::Abs(zi) <= dz)
                  return TMath::Min(sz, sr);
            }
         }
      }
   }
   // Do Rmax
   Double_t rout = 0.5 * (rmax1 + rmax2 + (rmax2 - rmax1) * point[2] * zinv);
   if (rsq > rout * (rout - TGeoShape::Tolerance())) {
      Double_t ddotn = point[0] * dir[0] + point[1] * dir[1] + 0.5 * (rmax1 - rmax2) * dir[2] * zinv * TMath::Sqrt(rsq);
      if (ddotn >= 0)
         return 0.0;
      TGeoCone::DistToCone(point, dir, dz, rmax1, rmax2, b, delta);
      if (delta < 0)
         return 0.0;
      Double_t sr = -b + delta;
      if (sr < 0)
         return sz;
      if (TMath::Abs(-b - delta) > sr)
         return sz;
      zi = point[2] + sr * dir[2];
      if (TMath::Abs(zi) <= dz)
         return TMath::Min(sz, sr);
      return sz;
   }
   TGeoCone::DistToCone(point, dir, dz, rmax1, rmax2, b, delta);
   if (delta > 0) {
      Double_t sr = -b - delta;
      if (sr > 0) {
         zi = point[2] + sr * dir[2];
         if (TMath::Abs(zi) <= dz)
            return TMath::Min(sz, sr);
      }
      sr = -b + delta;
      if (sr > TGeoShape::Tolerance()) {
         zi = point[2] + sr * dir[2];
         if (TMath::Abs(zi) <= dz)
            return TMath::Min(sz, sr);
      }
   }
   return sz;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from inside point to surface of the cone
/// Boundary safe algorithm.
 
Double_t
TGeoCone::DistFromInside(const Double_t *point, const Double_t *dir, Int_t iact, Double_t step, Double_t *safe) const
{
   if (iact < 3 && safe) {
      *safe = Safety(point, kTRUE);
      if (iact == 0)
         return TGeoShape::Big();
      if ((iact == 1) && (*safe > step))
         return TGeoShape::Big();
   }
   // compute distance to surface
   return TGeoCone::DistFromInsideS(point, dir, fDz, fRmin1, fRmax1, fRmin2, fRmax2);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from outside point to surface of the tube
/// Boundary safe algorithm.
 
Double_t TGeoCone::DistFromOutsideS(const Double_t *point, const Double_t *dir, Double_t dz, Double_t rmin1,
                                    Double_t rmax1, Double_t rmin2, Double_t rmax2)
{
   // compute distance to Z planes
   if (dz <= 0)
      return TGeoShape::Big();
   Double_t snxt;
   Double_t xp, yp, zp;
   Bool_t inz = kTRUE;
 
   if (point[2] <= -dz) {
      if (dir[2] <= 0)
         return TGeoShape::Big();
      snxt = (-dz - point[2]) / dir[2];
      xp = point[0] + snxt * dir[0];
      yp = point[1] + snxt * dir[1];
      Double_t r2 = xp * xp + yp * yp;
      if ((r2 >= rmin1 * rmin1) && (r2 <= rmax1 * rmax1))
         return snxt;
      inz = kFALSE;
   } else {
      if (point[2] >= dz) {
         if (dir[2] >= 0)
            return TGeoShape::Big();
         snxt = (dz - point[2]) / dir[2];
         xp = point[0] + snxt * dir[0];
         yp = point[1] + snxt * dir[1];
         Double_t r2 = xp * xp + yp * yp;
         if ((r2 >= rmin2 * rmin2) && (r2 <= rmax2 * rmax2))
            return snxt;
         inz = kFALSE;
      }
   }
 
   Double_t rsq = point[0] * point[0] + point[1] * point[1];
   Double_t dzinv = 1. / dz;
   Double_t ro1 = 0.5 * (rmin1 + rmin2);
   Bool_t hasrmin = (ro1 > 0) ? kTRUE : kFALSE;
   Double_t tg1 = 0.;
   Double_t rin = 0.;
   Bool_t inrmin = kTRUE; // r>=rmin
   if (hasrmin) {
      tg1 = 0.5 * (rmin2 - rmin1) * dzinv;
      rin = ro1 + tg1 * point[2];
      if (rin > 0 && rsq < rin * (rin - TGeoShape::Tolerance()))
         inrmin = kFALSE;
   }
   Double_t ro2 = 0.5 * (rmax1 + rmax2);
   Double_t tg2 = 0.5 * (rmax2 - rmax1) * dzinv;
   Double_t rout = tg2 * point[2] + ro2;
   Bool_t inrmax = kFALSE;
   if (rout > 0 && rsq < rout * (rout + TGeoShape::Tolerance()))
      inrmax = kTRUE;
   Bool_t in = inz & inrmin & inrmax;
   Double_t b, delta;
   // If inside cone, we are most likely on a boundary within machine precision.
   if (in) {
      Double_t r = TMath::Sqrt(rsq);
      Double_t safz = dz - TMath::Abs(point[2]); // positive
      Double_t safrmin = (hasrmin) ? (r - rin) : TGeoShape::Big();
      Double_t safrmax = rout - r;
      if (safz <= safrmin && safz <= safrmax) {
         // on Z boundary
         if (point[2] * dir[2] < 0)
            return 0.0;
         return TGeoShape::Big();
      }
      if (safrmax < safrmin) {
         // on rmax boundary
         Double_t ddotn = point[0] * dir[0] + point[1] * dir[1] - tg2 * dir[2] * r;
         if (ddotn <= 0)
            return 0.0;
         return TGeoShape::Big();
      }
      // on rmin boundary
      Double_t ddotn = point[0] * dir[0] + point[1] * dir[1] - tg1 * dir[2] * r;
      if (ddotn >= 0)
         return 0.0;
      // we can cross (+) solution of rmin
      TGeoCone::DistToCone(point, dir, dz, rmin1, rmin2, b, delta);
 
      if (delta < 0)
         return 0.0;
      snxt = -b + delta;
      if (snxt < 0)
         return TGeoShape::Big();
      if (TMath::Abs(-b - delta) > snxt)
         return TGeoShape::Big();
      zp = point[2] + snxt * dir[2];
      if (TMath::Abs(zp) <= dz)
         return snxt;
      return TGeoShape::Big();
   }
 
   // compute distance to inner cone
   snxt = TGeoShape::Big();
   if (!inrmin) {
      // ray can cross inner cone (but not only!)
      TGeoCone::DistToCone(point, dir, dz, rmin1, rmin2, b, delta);
      if (delta < 0)
         return TGeoShape::Big();
      snxt = -b + delta;
      if (snxt > 0) {
         zp = point[2] + snxt * dir[2];
         if (TMath::Abs(zp) <= dz)
            return snxt;
      }
      snxt = -b - delta;
      if (snxt > 0) {
         zp = point[2] + snxt * dir[2];
         if (TMath::Abs(zp) <= dz)
            return snxt;
      }
      snxt = TGeoShape::Big();
   } else {
      if (hasrmin) {
         TGeoCone::DistToCone(point, dir, dz, rmin1, rmin2, b, delta);
         if (delta > 0) {
            Double_t din = -b + delta;
            if (din > 0) {
               zp = point[2] + din * dir[2];
               if (TMath::Abs(zp) <= dz)
                  snxt = din;
            }
         }
      }
   }
 
   if (inrmax)
      return snxt;
   // We can cross outer cone, both solutions possible
   // compute distance to outer cone
   TGeoCone::DistToCone(point, dir, dz, rmax1, rmax2, b, delta);
   if (delta < 0)
      return snxt;
   Double_t dout = -b - delta;
   if (dout > 0 && dout < snxt) {
      zp = point[2] + dout * dir[2];
      if (TMath::Abs(zp) <= dz)
         return dout;
   }
   dout = -b + delta;
   if (dout <= 0 || dout > snxt)
      return snxt;
   zp = point[2] + dout * dir[2];
   if (TMath::Abs(zp) <= dz)
      return dout;
   return snxt;
}
 
////////////////////////////////////////////////////////////////////////////////
/// compute distance from outside point to surface of the tube
 
Double_t
TGeoCone::DistFromOutside(const Double_t *point, const Double_t *dir, Int_t iact, Double_t step, Double_t *safe) const
{
   // compute safe radius
   if (iact < 3 && safe) {
      *safe = Safety(point, kFALSE);
      if (iact == 0)
         return TGeoShape::Big();
      if ((iact == 1) && (*safe > step))
         return TGeoShape::Big();
   }
   // Check if the bounding box is crossed within the requested distance
   Double_t sdist = TGeoBBox::DistFromOutside(point, dir, fDX, fDY, fDZ, fOrigin, step);
   if (sdist >= step)
      return TGeoShape::Big();
   // compute distance to Z planes
   return TGeoCone::DistFromOutsideS(point, dir, fDz, fRmin1, fRmax1, fRmin2, fRmax2);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Static method to compute distance to a conical surface with :
/// - r1, z1 - radius and Z position of lower base
/// - r2, z2 - radius and Z position of upper base
 
void TGeoCone::DistToCone(const Double_t *point, const Double_t *dir, Double_t dz, Double_t r1, Double_t r2,
                          Double_t &b, Double_t &delta)
{
   b = 0;
   delta = -1.;
   if (dz < 0)
      return;
   Double_t ro0 = 0.5 * (r1 + r2);
   Double_t tz = 0.5 * (r2 - r1) / dz;
   Double_t rsq = point[0] * point[0] + point[1] * point[1];
   Double_t rc = ro0 + point[2] * tz;
 
   Double_t a = dir[0] * dir[0] + dir[1] * dir[1] - tz * tz * dir[2] * dir[2];
   b = point[0] * dir[0] + point[1] * dir[1] - tz * rc * dir[2];
   Double_t c = rsq - rc * rc;
 
   if (TMath::Abs(a) < TGeoShape::Tolerance()) {
      if (TMath::Abs(b) < TGeoShape::Tolerance())
         return;
      b = 0.5 * c / b;
      delta = 0.;
      return;
   }
   a = 1. / a;
   b *= a;
   c *= a;
   delta = b * b - c;
   if (delta > 0) {
      delta = TMath::Sqrt(delta);
   } else {
      delta = -1.;
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// compute closest distance from point px,py to each corner
 
Int_t TGeoCone::DistancetoPrimitive(Int_t px, Int_t py)
{
   Int_t n = gGeoManager->GetNsegments();
   const Int_t numPoints = 4 * n;
   return ShapeDistancetoPrimitive(numPoints, px, py);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Divide this cone shape belonging to volume "voldiv" into ndiv volumes
/// called divname, from start position with the given step. Returns pointer
/// to created division cell volume in case of Z divisions. For Z division
/// creates all volumes with different shapes and returns pointer to volume that
/// was divided. In case a wrong division axis is supplied, returns pointer to
/// volume that was divided.
 
TGeoVolume *
TGeoCone::Divide(TGeoVolume *voldiv, const char *divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step)
{
   TGeoShape *shape;          //--- shape to be created
   TGeoVolume *vol;           //--- division volume to be created
   TGeoVolumeMulti *vmulti;   //--- generic divided volume
   TGeoPatternFinder *finder; //--- finder to be attached
   TString opt = "";          //--- option to be attached
   Int_t id;
   Double_t end = start + ndiv * step;
   switch (iaxis) {
   case 1: //---              R division
      Error("Divide", "division of a cone on R not implemented");
      return 0;
   case 2: // ---             Phi division
      finder = new TGeoPatternCylPhi(voldiv, ndiv, start, end);
      voldiv->SetFinder(finder);
      finder->SetDivIndex(voldiv->GetNdaughters());
      shape = new TGeoConeSeg(fDz, fRmin1, fRmax1, fRmin2, fRmax2, -step / 2, step / 2);
      vol = new TGeoVolume(divname, shape, voldiv->GetMedium());
      vmulti = gGeoManager->MakeVolumeMulti(divname, voldiv->GetMedium());
      vmulti->AddVolume(vol);
      opt = "Phi";
      for (id = 0; id < ndiv; id++) {
         voldiv->AddNodeOffset(vol, id, start + id * step + step / 2, opt.Data());
         ((TGeoNodeOffset *)voldiv->GetNodes()->At(voldiv->GetNdaughters() - 1))->SetFinder(finder);
      }
      return vmulti;
   case 3: //---               Z division
      vmulti = gGeoManager->MakeVolumeMulti(divname, voldiv->GetMedium());
      finder = new TGeoPatternZ(voldiv, ndiv, start, end);
      voldiv->SetFinder(finder);
      finder->SetDivIndex(voldiv->GetNdaughters());
      for (id = 0; id < ndiv; id++) {
         Double_t z1 = start + id * step;
         Double_t z2 = start + (id + 1) * step;
         Double_t rmin1n = 0.5 * (fRmin1 * (fDz - z1) + fRmin2 * (fDz + z1)) / fDz;
         Double_t rmax1n = 0.5 * (fRmax1 * (fDz - z1) + fRmax2 * (fDz + z1)) / fDz;
         Double_t rmin2n = 0.5 * (fRmin1 * (fDz - z2) + fRmin2 * (fDz + z2)) / fDz;
         Double_t rmax2n = 0.5 * (fRmax1 * (fDz - z2) + fRmax2 * (fDz + z2)) / fDz;
         shape = new TGeoCone(0.5 * step, rmin1n, rmax1n, rmin2n, rmax2n);
         vol = new TGeoVolume(divname, shape, voldiv->GetMedium());
         vmulti->AddVolume(vol);
         opt = "Z";
         voldiv->AddNodeOffset(vol, id, start + id * step + step / 2, opt.Data());
         ((TGeoNodeOffset *)voldiv->GetNodes()->At(voldiv->GetNdaughters() - 1))->SetFinder(finder);
      }
      return vmulti;
   default: Error("Divide", "Wrong axis type for division"); return 0;
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Returns name of axis IAXIS.
 
const char *TGeoCone::GetAxisName(Int_t iaxis) const
{
   switch (iaxis) {
   case 1: return "R";
   case 2: return "PHI";
   case 3: return "Z";
   default: return "undefined";
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Get range of shape for a given axis.
 
Double_t TGeoCone::GetAxisRange(Int_t iaxis, Double_t &xlo, Double_t &xhi) const
{
   xlo = 0;
   xhi = 0;
   Double_t dx = 0;
   switch (iaxis) {
   case 2:
      xlo = 0.;
      xhi = 360.;
      return 360.;
   case 3:
      xlo = -fDz;
      xhi = fDz;
      dx = xhi - xlo;
      return dx;
   }
   return dx;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fill vector param[4] with the bounding cylinder parameters. The order
/// is the following : Rmin, Rmax, Phi1, Phi2, dZ
 
void TGeoCone::GetBoundingCylinder(Double_t *param) const
{
   param[0] = TMath::Min(fRmin1, fRmin2); // Rmin
   param[0] *= param[0];
   param[1] = TMath::Max(fRmax1, fRmax2); // Rmax
   param[1] *= param[1];
   param[2] = 0.;   // Phi1
   param[3] = 360.; // Phi2
}
 
////////////////////////////////////////////////////////////////////////////////
/// in case shape has some negative parameters, these has to be computed
/// in order to fit the mother
 
TGeoShape *TGeoCone::GetMakeRuntimeShape(TGeoShape *mother, TGeoMatrix * /*mat*/) const
{
   if (!TestShapeBit(kGeoRunTimeShape))
      return 0;
   if (!mother->TestShapeBit(kGeoCone)) {
      Error("GetMakeRuntimeShape", "invalid mother");
      return 0;
   }
   Double_t rmin1, rmax1, rmin2, rmax2, dz;
   rmin1 = fRmin1;
   rmax1 = fRmax1;
   rmin2 = fRmin2;
   rmax2 = fRmax2;
   dz = fDz;
   if (fDz < 0)
      dz = ((TGeoCone *)mother)->GetDz();
   if (fRmin1 < 0)
      rmin1 = ((TGeoCone *)mother)->GetRmin1();
   if (fRmax1 < 0)
      rmax1 = ((TGeoCone *)mother)->GetRmax1();
   if (fRmin2 < 0)
      rmin2 = ((TGeoCone *)mother)->GetRmin2();
   if (fRmax2 < 0)
      rmax2 = ((TGeoCone *)mother)->GetRmax2();
 
   return (new TGeoCone(GetName(), dz, rmin1, rmax1, rmin2, rmax2));
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fills array with n random points located on the line segments of the shape mesh.
/// The output array must be provided with a length of minimum 3*npoints. Returns
/// true if operation is implemented.
 
Bool_t TGeoCone::GetPointsOnSegments(Int_t npoints, Double_t *array) const
{
   if (npoints > (npoints / 2) * 2) {
      Error("GetPointsOnSegments", "Npoints must be even number");
      return kFALSE;
   }
   Bool_t hasrmin = (fRmin1 > 0 || fRmin2 > 0) ? kTRUE : kFALSE;
   Int_t nc = 0;
   if (hasrmin)
      nc = (Int_t)TMath::Sqrt(0.5 * npoints);
   else
      nc = (Int_t)TMath::Sqrt(1. * npoints);
   Double_t dphi = TMath::TwoPi() / nc;
   Double_t phi = 0;
   Int_t ntop = 0;
   if (hasrmin)
      ntop = npoints / 2 - nc * (nc - 1);
   else
      ntop = npoints - nc * (nc - 1);
   Double_t dz = 2 * fDz / (nc - 1);
   Double_t z = 0;
   Int_t icrt = 0;
   Int_t nphi = nc;
   Double_t rmin = 0.;
   Double_t rmax = 0.;
   // loop z sections
   for (Int_t i = 0; i < nc; i++) {
      if (i == (nc - 1))
         nphi = ntop;
      z = -fDz + i * dz;
      if (hasrmin)
         rmin = 0.5 * (fRmin1 + fRmin2) + 0.5 * (fRmin2 - fRmin1) * z / fDz;
      rmax = 0.5 * (fRmax1 + fRmax2) + 0.5 * (fRmax2 - fRmax1) * z / fDz;
      // loop points on circle sections
      for (Int_t j = 0; j < nphi; j++) {
         phi = j * dphi;
         if (hasrmin) {
            array[icrt++] = rmin * TMath::Cos(phi);
            array[icrt++] = rmin * TMath::Sin(phi);
            array[icrt++] = z;
         }
         array[icrt++] = rmax * TMath::Cos(phi);
         array[icrt++] = rmax * TMath::Sin(phi);
         array[icrt++] = z;
      }
   }
   return kTRUE;
}
 
////////////////////////////////////////////////////////////////////////////////
/// print shape parameters
 
void TGeoCone::InspectShape() const
{
   printf("*** Shape %s TGeoCone ***\n", GetName());
   printf("    dz    =: %11.5f\n", fDz);
   printf("    Rmin1 = %11.5f\n", fRmin1);
   printf("    Rmax1 = %11.5f\n", fRmax1);
   printf("    Rmin2 = %11.5f\n", fRmin2);
   printf("    Rmax2 = %11.5f\n", fRmax2);
   printf(" Bounding box:\n");
   TGeoBBox::InspectShape();
}
 
////////////////////////////////////////////////////////////////////////////////
/// Creates a TBuffer3D describing *this* shape.
/// Coordinates are in local reference frame.
 
TBuffer3D *TGeoCone::MakeBuffer3D() const
{
   Int_t n = gGeoManager->GetNsegments();
   Int_t nbPnts = 4 * n;
   Int_t nbSegs = 8 * n;
   Int_t nbPols = 4 * n;
   TBuffer3D *buff =
      new TBuffer3D(TBuffer3DTypes::kGeneric, nbPnts, 3 * nbPnts, nbSegs, 3 * nbSegs, nbPols, 6 * nbPols);
 
   if (buff) {
      SetPoints(buff->fPnts);
      SetSegsAndPols(*buff);
   }
   return buff;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fill TBuffer3D structure for segments and polygons.
 
void TGeoCone::SetSegsAndPols(TBuffer3D &buffer) const
{
   Int_t i, j;
   Int_t n = gGeoManager->GetNsegments();
   Int_t c = GetBasicColor();
 
   for (i = 0; i < 4; i++) {
      for (j = 0; j < n; j++) {
         buffer.fSegs[(i * n + j) * 3] = c;
         buffer.fSegs[(i * n + j) * 3 + 1] = i * n + j;
         buffer.fSegs[(i * n + j) * 3 + 2] = i * n + j + 1;
      }
      buffer.fSegs[(i * n + j - 1) * 3 + 2] = i * n;
   }
   for (i = 4; i < 6; i++) {
      for (j = 0; j < n; j++) {
         buffer.fSegs[(i * n + j) * 3] = c + 1;
         buffer.fSegs[(i * n + j) * 3 + 1] = (i - 4) * n + j;
         buffer.fSegs[(i * n + j) * 3 + 2] = (i - 2) * n + j;
      }
   }
   for (i = 6; i < 8; i++) {
      for (j = 0; j < n; j++) {
         buffer.fSegs[(i * n + j) * 3] = c;
         buffer.fSegs[(i * n + j) * 3 + 1] = 2 * (i - 6) * n + j;
         buffer.fSegs[(i * n + j) * 3 + 2] = (2 * (i - 6) + 1) * n + j;
      }
   }
 
   Int_t indx = 0;
   i = 0;
   for (j = 0; j < n; j++) {
      indx = 6 * (i * n + j);
      buffer.fPols[indx] = c;
      buffer.fPols[indx + 1] = 4;
      buffer.fPols[indx + 5] = i * n + j;
      buffer.fPols[indx + 4] = (4 + i) * n + j;
      buffer.fPols[indx + 3] = (2 + i) * n + j;
      buffer.fPols[indx + 2] = (4 + i) * n + j + 1;
   }
   buffer.fPols[indx + 2] = (4 + i) * n;
   i = 1;
   for (j = 0; j < n; j++) {
      indx = 6 * (i * n + j);
      buffer.fPols[indx] = c;
      buffer.fPols[indx + 1] = 4;
      buffer.fPols[indx + 2] = i * n + j;
      buffer.fPols[indx + 3] = (4 + i) * n + j;
      buffer.fPols[indx + 4] = (2 + i) * n + j;
      buffer.fPols[indx + 5] = (4 + i) * n + j + 1;
   }
   buffer.fPols[indx + 5] = (4 + i) * n;
   i = 2;
   for (j = 0; j < n; j++) {
      indx = 6 * (i * n + j);
      buffer.fPols[indx] = c + i;
      buffer.fPols[indx + 1] = 4;
      buffer.fPols[indx + 2] = (i - 2) * 2 * n + j;
      buffer.fPols[indx + 3] = (4 + i) * n + j;
      buffer.fPols[indx + 4] = ((i - 2) * 2 + 1) * n + j;
      buffer.fPols[indx + 5] = (4 + i) * n + j + 1;
   }
   buffer.fPols[indx + 5] = (4 + i) * n;
   i = 3;
   for (j = 0; j < n; j++) {
      indx = 6 * (i * n + j);
      buffer.fPols[indx] = c + i;
      buffer.fPols[indx + 1] = 4;
      buffer.fPols[indx + 5] = (i - 2) * 2 * n + j;
      buffer.fPols[indx + 4] = (4 + i) * n + j;
      buffer.fPols[indx + 3] = ((i - 2) * 2 + 1) * n + j;
      buffer.fPols[indx + 2] = (4 + i) * n + j + 1;
   }
   buffer.fPols[indx + 2] = (4 + i) * n;
}
 
////////////////////////////////////////////////////////////////////////////////
/// computes the closest distance from given point to this shape, according
/// to option. The matching point on the shape is stored in spoint.
 
Double_t TGeoCone::Safety(const Double_t *point, Bool_t in) const
{
   Double_t saf[4];
   Double_t r = TMath::Sqrt(point[0] * point[0] + point[1] * point[1]);
   saf[0] = TGeoShape::SafetySeg(r, point[2], fRmin1, -fDz, fRmax1, -fDz, !in);
   saf[1] = TGeoShape::SafetySeg(r, point[2], fRmax2, fDz, fRmin2, fDz, !in);
   saf[2] = TGeoShape::SafetySeg(r, point[2], fRmin2, fDz, fRmin1, -fDz, !in);
   saf[3] = TGeoShape::SafetySeg(r, point[2], fRmax1, -fDz, fRmax2, fDz, !in);
   Double_t safety = saf[TMath::LocMin(4, saf)];
   if (safety > 1.E20)
      safety = 0.;
   return safety;
}
 
////////////////////////////////////////////////////////////////////////////////
/// computes the closest distance from given point to this shape, according
/// to option. The matching point on the shape is stored in spoint.
 
Double_t TGeoCone::SafetyS(const Double_t *point, Bool_t in, Double_t dz, Double_t rmin1, Double_t rmax1,
                           Double_t rmin2, Double_t rmax2, Int_t skipz)
{
   Double_t saf[4];
   Double_t r = TMath::Sqrt(point[0] * point[0] + point[1] * point[1]);
   //   Double_t rin = tg1*point[2]+ro1;
   //   Double_t rout = tg2*point[2]+ro2;
   switch (skipz) {
   case 1: // skip lower Z plane
      saf[0] = TGeoShape::Big();
      saf[1] = TGeoShape::SafetySeg(r, point[2], rmax2, dz, rmin2, dz, !in);
      break;
   case 2: // skip upper Z plane
      saf[0] = TGeoShape::SafetySeg(r, point[2], rmin1, -dz, rmax1, -dz, !in);
      saf[1] = TGeoShape::Big();
      break;
   case 3: // skip both
      saf[0] = saf[1] = TGeoShape::Big();
      break;
   default:
      saf[0] = TGeoShape::SafetySeg(r, point[2], rmin1, -dz, rmax1, -dz, !in);
      saf[1] = TGeoShape::SafetySeg(r, point[2], rmax2, dz, rmin2, dz, !in);
   }
   // Safety to inner part
   if (rmin1 > 0 || rmin2 > 0)
      saf[2] = TGeoShape::SafetySeg(r, point[2], rmin2, dz, rmin1, -dz, !in);
   else
      saf[2] = TGeoShape::Big();
   saf[3] = TGeoShape::SafetySeg(r, point[2], rmax1, -dz, rmax2, dz, !in);
   return saf[TMath::LocMin(4, saf)];
}
 
////////////////////////////////////////////////////////////////////////////////
/// Save a primitive as a C++ statement(s) on output stream "out".
 
void TGeoCone::SavePrimitive(std::ostream &out, Option_t * /*option*/ /*= ""*/)
{
   if (TObject::TestBit(kGeoSavePrimitive))
      return;
   out << "   // Shape: " << GetName() << " type: " << ClassName() << std::endl;
   out << "   dz    = " << fDz << ";" << std::endl;
   out << "   rmin1 = " << fRmin1 << ";" << std::endl;
   out << "   rmax1 = " << fRmax1 << ";" << std::endl;
   out << "   rmin2 = " << fRmin2 << ";" << std::endl;
   out << "   rmax2 = " << fRmax2 << ";" << std::endl;
   out << "   TGeoShape *" << GetPointerName() << " = new TGeoCone(\"" << GetName()
       << "\", dz,rmin1,rmax1,rmin2,rmax2);" << std::endl;
   TObject::SetBit(TGeoShape::kGeoSavePrimitive);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Set cone dimensions.
 
void TGeoCone::SetConeDimensions(Double_t dz, Double_t rmin1, Double_t rmax1, Double_t rmin2, Double_t rmax2)
{
   if (rmin1 >= 0) {
      if (rmax1 > 0) {
         if (rmin1 <= rmax1) {
            // normal rmin/rmax
            fRmin1 = rmin1;
            fRmax1 = rmax1;
         } else {
            fRmin1 = rmax1;
            fRmax1 = rmin1;
            Warning("SetConeDimensions", "rmin1>rmax1 Switch rmin1<->rmax1");
            SetShapeBit(TGeoShape::kGeoBad);
         }
      } else {
         // run-time
         fRmin1 = rmin1;
         fRmax1 = rmax1;
      }
   } else {
      // run-time
      fRmin1 = rmin1;
      fRmax1 = rmax1;
   }
   if (rmin2 >= 0) {
      if (rmax2 > 0) {
         if (rmin2 <= rmax2) {
            // normal rmin/rmax
            fRmin2 = rmin2;
            fRmax2 = rmax2;
         } else {
            fRmin2 = rmax2;
            fRmax2 = rmin2;
            Warning("SetConeDimensions", "rmin2>rmax2 Switch rmin2<->rmax2");
            SetShapeBit(TGeoShape::kGeoBad);
         }
      } else {
         // run-time
         fRmin2 = rmin2;
         fRmax2 = rmax2;
      }
   } else {
      // run-time
      fRmin2 = rmin2;
      fRmax2 = rmax2;
   }
 
   fDz = dz;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Set cone dimensions from an array.
 
void TGeoCone::SetDimensions(Double_t *param)
{
   Double_t dz = param[0];
   Double_t rmin1 = param[1];
   Double_t rmax1 = param[2];
   Double_t rmin2 = param[3];
   Double_t rmax2 = param[4];
   SetConeDimensions(dz, rmin1, rmax1, rmin2, rmax2);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Create cone mesh points.
 
void TGeoCone::SetPoints(Double_t *points) const
{
   Double_t dz, phi, dphi;
   Int_t j, n;
 
   n = gGeoManager->GetNsegments();
   dphi = 360. / n;
   dz = fDz;
   Int_t indx = 0;
 
   if (points) {
      for (j = 0; j < n; j++) {
         phi = j * dphi * TMath::DegToRad();
         points[indx++] = fRmin1 * TMath::Cos(phi);
         points[indx++] = fRmin1 * TMath::Sin(phi);
         points[indx++] = -dz;
      }
 
      for (j = 0; j < n; j++) {
         phi = j * dphi * TMath::DegToRad();
         points[indx++] = fRmax1 * TMath::Cos(phi);
         points[indx++] = fRmax1 * TMath::Sin(phi);
         points[indx++] = -dz;
      }
 
      for (j = 0; j < n; j++) {
         phi = j * dphi * TMath::DegToRad();
         points[indx++] = fRmin2 * TMath::Cos(phi);
         points[indx++] = fRmin2 * TMath::Sin(phi);
         points[indx++] = dz;
      }
 
      for (j = 0; j < n; j++) {
         phi = j * dphi * TMath::DegToRad();
         points[indx++] = fRmax2 * TMath::Cos(phi);
         points[indx++] = fRmax2 * TMath::Sin(phi);
         points[indx++] = dz;
      }
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Create cone mesh points.
 
void TGeoCone::SetPoints(Float_t *points) const
{
   Double_t dz, phi, dphi;
   Int_t j, n;
 
   n = gGeoManager->GetNsegments();
   dphi = 360. / n;
   dz = fDz;
   Int_t indx = 0;
 
   if (points) {
      for (j = 0; j < n; j++) {
         phi = j * dphi * TMath::DegToRad();
         points[indx++] = fRmin1 * TMath::Cos(phi);
         points[indx++] = fRmin1 * TMath::Sin(phi);
         points[indx++] = -dz;
      }
 
      for (j = 0; j < n; j++) {
         phi = j * dphi * TMath::DegToRad();
         points[indx++] = fRmax1 * TMath::Cos(phi);
         points[indx++] = fRmax1 * TMath::Sin(phi);
         points[indx++] = -dz;
      }
 
      for (j = 0; j < n; j++) {
         phi = j * dphi * TMath::DegToRad();
         points[indx++] = fRmin2 * TMath::Cos(phi);
         points[indx++] = fRmin2 * TMath::Sin(phi);
         points[indx++] = dz;
      }
 
      for (j = 0; j < n; j++) {
         phi = j * dphi * TMath::DegToRad();
         points[indx++] = fRmax2 * TMath::Cos(phi);
         points[indx++] = fRmax2 * TMath::Sin(phi);
         points[indx++] = dz;
      }
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Returns numbers of vertices, segments and polygons composing the shape mesh.
 
void TGeoCone::GetMeshNumbers(Int_t &nvert, Int_t &nsegs, Int_t &npols) const
{
   Int_t n = gGeoManager->GetNsegments();
   nvert = n * 4;
   nsegs = n * 8;
   npols = n * 4;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Return number of vertices of the mesh representation
 
Int_t TGeoCone::GetNmeshVertices() const
{
   Int_t n = gGeoManager->GetNsegments();
   Int_t numPoints = n * 4;
   return numPoints;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fill size of this 3-D object
 
void TGeoCone::Sizeof3D() const {}
 
////////////////////////////////////////////////////////////////////////////////
/// Fills a static 3D buffer and returns a reference.
 
const TBuffer3D &TGeoCone::GetBuffer3D(Int_t reqSections, Bool_t localFrame) const
{
   static TBuffer3D buffer(TBuffer3DTypes::kGeneric);
 
   TGeoBBox::FillBuffer3D(buffer, reqSections, localFrame);
 
   if (reqSections & TBuffer3D::kRawSizes) {
      Int_t n = gGeoManager->GetNsegments();
      Int_t nbPnts = 4 * n;
      Int_t nbSegs = 8 * n;
      Int_t nbPols = 4 * n;
      if (buffer.SetRawSizes(nbPnts, 3 * nbPnts, nbSegs, 3 * nbSegs, nbPols, 6 * nbPols)) {
         buffer.SetSectionsValid(TBuffer3D::kRawSizes);
      }
   }
 
   // TODO: Can we push this as common down to TGeoShape?
   if ((reqSections & TBuffer3D::kRaw) && buffer.SectionsValid(TBuffer3D::kRawSizes)) {
      SetPoints(buffer.fPnts);
      if (!buffer.fLocalFrame) {
         TransformPoints(buffer.fPnts, buffer.NbPnts());
      }
 
      SetSegsAndPols(buffer);
      buffer.SetSectionsValid(TBuffer3D::kRaw);
   }
 
   return buffer;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Check the inside status for each of the points in the array.
/// Input: Array of point coordinates + vector size
/// Output: Array of Booleans for the inside of each point
 
void TGeoCone::Contains_v(const Double_t *points, Bool_t *inside, Int_t vecsize) const
{
   for (Int_t i = 0; i < vecsize; i++)
      inside[i] = Contains(&points[3 * i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute the normal for an array o points so that norm.dot.dir is positive
/// Input: Arrays of point coordinates and directions + vector size
/// Output: Array of normal directions
 
void TGeoCone::ComputeNormal_v(const Double_t *points, const Double_t *dirs, Double_t *norms, Int_t vecsize)
{
   for (Int_t i = 0; i < vecsize; i++)
      ComputeNormal(&points[3 * i], &dirs[3 * i], &norms[3 * i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from array of input points having directions specified by dirs. Store output in dists
 
void TGeoCone::DistFromInside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize,
                                Double_t *step) const
{
   for (Int_t i = 0; i < vecsize; i++)
      dists[i] = DistFromInside(&points[3 * i], &dirs[3 * i], 3, step[i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from array of input points having directions specified by dirs. Store output in dists
 
void TGeoCone::DistFromOutside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize,
                                 Double_t *step) const
{
   for (Int_t i = 0; i < vecsize; i++)
      dists[i] = DistFromOutside(&points[3 * i], &dirs[3 * i], 3, step[i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute safe distance from each of the points in the input array.
/// Input: Array of point coordinates, array of statuses for these points, size of the arrays
/// Output: Safety values
 
void TGeoCone::Safety_v(const Double_t *points, const Bool_t *inside, Double_t *safe, Int_t vecsize) const
{
   for (Int_t i = 0; i < vecsize; i++)
      safe[i] = Safety(&points[3 * i], inside[i]);
}
 
ClassImp(TGeoConeSeg);
 
////////////////////////////////////////////////////////////////////////////////
/// Default constructor
 
TGeoConeSeg::TGeoConeSeg()
   : TGeoCone(), fPhi1(0.), fPhi2(0.), fS1(0.), fC1(0.), fS2(0.), fC2(0.), fSm(0.), fCm(0.), fCdfi(0.)
{
   SetShapeBit(TGeoShape::kGeoConeSeg);
   fPhi1 = fPhi2 = 0.0;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Default constructor specifying minimum and maximum radius
 
TGeoConeSeg::TGeoConeSeg(Double_t dz, Double_t rmin1, Double_t rmax1, Double_t rmin2, Double_t rmax2, Double_t phi1,
                         Double_t phi2)
   : TGeoCone(dz, rmin1, rmax1, rmin2, rmax2),
     fPhi1(0.),
     fPhi2(0.),
     fS1(0.),
     fC1(0.),
     fS2(0.),
     fC2(0.),
     fSm(0.),
     fCm(0.),
     fCdfi(0.)
 
{
   SetShapeBit(TGeoShape::kGeoConeSeg);
   SetConsDimensions(dz, rmin1, rmax1, rmin2, rmax2, phi1, phi2);
   ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// Default constructor specifying minimum and maximum radius
 
TGeoConeSeg::TGeoConeSeg(const char *name, Double_t dz, Double_t rmin1, Double_t rmax1, Double_t rmin2, Double_t rmax2,
                         Double_t phi1, Double_t phi2)
   : TGeoCone(name, dz, rmin1, rmax1, rmin2, rmax2),
     fPhi1(0.),
     fPhi2(0.),
     fS1(0.),
     fC1(0.),
     fS2(0.),
     fC2(0.),
     fSm(0.),
     fCm(0.),
     fCdfi(0.)
{
   SetShapeBit(TGeoShape::kGeoConeSeg);
   SetConsDimensions(dz, rmin1, rmax1, rmin2, rmax2, phi1, phi2);
   ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// Default constructor specifying minimum and maximum radius
///  - param[0] = dz
///  - param[1] = Rmin1
///  - param[2] = Rmax1
///  - param[3] = Rmin2
///  - param[4] = Rmax2
///  - param[5] = phi1
///  - param[6] = phi2
 
TGeoConeSeg::TGeoConeSeg(Double_t *param)
   : TGeoCone(0, 0, 0, 0, 0), fPhi1(0.), fPhi2(0.), fS1(0.), fC1(0.), fS2(0.), fC2(0.), fSm(0.), fCm(0.), fCdfi(0.)
{
   SetShapeBit(TGeoShape::kGeoConeSeg);
   SetDimensions(param);
   ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// destructor
 
TGeoConeSeg::~TGeoConeSeg() {}
 
////////////////////////////////////////////////////////////////////////////////
/// Function called after streaming an object of this class.
 
void TGeoConeSeg::AfterStreamer()
{
   InitTrigonometry();
}
 
////////////////////////////////////////////////////////////////////////////////
/// Init frequently used trigonometric values
 
void TGeoConeSeg::InitTrigonometry()
{
   Double_t phi1 = fPhi1 * TMath::DegToRad();
   Double_t phi2 = fPhi2 * TMath::DegToRad();
   fC1 = TMath::Cos(phi1);
   fS1 = TMath::Sin(phi1);
   fC2 = TMath::Cos(phi2);
   fS2 = TMath::Sin(phi2);
   Double_t fio = 0.5 * (phi1 + phi2);
   fCm = TMath::Cos(fio);
   fSm = TMath::Sin(fio);
   Double_t dfi = 0.5 * (phi2 - phi1);
   fCdfi = TMath::Cos(dfi);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Computes capacity of the shape in [length^3]
 
Double_t TGeoConeSeg::Capacity() const
{
   return TGeoConeSeg::Capacity(fDz, fRmin1, fRmax1, fRmin2, fRmax2, fPhi1, fPhi2);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Computes capacity of the shape in [length^3]
 
Double_t TGeoConeSeg::Capacity(Double_t dz, Double_t rmin1, Double_t rmax1, Double_t rmin2, Double_t rmax2,
                               Double_t phi1, Double_t phi2)
{
   Double_t capacity = (TMath::Abs(phi2 - phi1) * TMath::DegToRad() * dz / 3.) *
                       (rmax1 * rmax1 + rmax2 * rmax2 + rmax1 * rmax2 - rmin1 * rmin1 - rmin2 * rmin2 - rmin1 * rmin2);
   return capacity;
}
 
////////////////////////////////////////////////////////////////////////////////
/// compute bounding box of the tube segment
 
void TGeoConeSeg::ComputeBBox()
{
   Double_t rmin, rmax;
   rmin = TMath::Min(fRmin1, fRmin2);
   rmax = TMath::Max(fRmax1, fRmax2);
 
   Double_t xc[4];
   Double_t yc[4];
   xc[0] = rmax * fC1;
   yc[0] = rmax * fS1;
   xc[1] = rmax * fC2;
   yc[1] = rmax * fS2;
   xc[2] = rmin * fC1;
   yc[2] = rmin * fS1;
   xc[3] = rmin * fC2;
   yc[3] = rmin * fS2;
 
   Double_t xmin = xc[TMath::LocMin(4, &xc[0])];
   Double_t xmax = xc[TMath::LocMax(4, &xc[0])];
   Double_t ymin = yc[TMath::LocMin(4, &yc[0])];
   Double_t ymax = yc[TMath::LocMax(4, &yc[0])];
 
   Double_t dp = fPhi2 - fPhi1;
   Double_t ddp = -fPhi1;
   if (ddp < 0)
      ddp += 360;
   if (ddp <= dp)
      xmax = rmax;
   ddp = 90 - fPhi1;
   if (ddp < 0)
      ddp += 360;
   if (ddp <= dp)
      ymax = rmax;
   ddp = 180 - fPhi1;
   if (ddp < 0)
      ddp += 360;
   if (ddp <= dp)
      xmin = -rmax;
   ddp = 270 - fPhi1;
   if (ddp < 0)
      ddp += 360;
   if (ddp <= dp)
      ymin = -rmax;
   fOrigin[0] = (xmax + xmin) / 2;
   fOrigin[1] = (ymax + ymin) / 2;
   fOrigin[2] = 0;
   fDX = (xmax - xmin) / 2;
   fDY = (ymax - ymin) / 2;
   fDZ = fDz;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute normal to closest surface from POINT.
 
void TGeoConeSeg::ComputeNormal(const Double_t *point, const Double_t *dir, Double_t *norm)
{
   Double_t saf[3];
   Double_t ro1 = 0.5 * (fRmin1 + fRmin2);
   Double_t tg1 = 0.5 * (fRmin2 - fRmin1) / fDz;
   Double_t cr1 = 1. / TMath::Sqrt(1. + tg1 * tg1);
   Double_t ro2 = 0.5 * (fRmax1 + fRmax2);
   Double_t tg2 = 0.5 * (fRmax2 - fRmax1) / fDz;
   Double_t cr2 = 1. / TMath::Sqrt(1. + tg2 * tg2);
 
   Double_t r = TMath::Sqrt(point[0] * point[0] + point[1] * point[1]);
   Double_t rin = tg1 * point[2] + ro1;
   Double_t rout = tg2 * point[2] + ro2;
   saf[0] = TMath::Abs(fDz - TMath::Abs(point[2]));
   saf[1] = (ro1 > 0) ? (TMath::Abs((r - rin) * cr1)) : TGeoShape::Big();
   saf[2] = TMath::Abs((rout - r) * cr2);
   Int_t i = TMath::LocMin(3, saf);
   if (((fPhi2 - fPhi1) < 360.) && TGeoShape::IsCloseToPhi(saf[i], point, fC1, fS1, fC2, fS2)) {
      TGeoShape::NormalPhi(point, dir, norm, fC1, fS1, fC2, fS2);
      return;
   }
   if (i == 0) {
      norm[0] = norm[1] = 0.;
      norm[2] = TMath::Sign(1., dir[2]);
      return;
   }
 
   Double_t phi = TMath::ATan2(point[1], point[0]);
   Double_t cphi = TMath::Cos(phi);
   Double_t sphi = TMath::Sin(phi);
 
   if (i == 1) {
      norm[0] = cr1 * cphi;
      norm[1] = cr1 * sphi;
      norm[2] = -tg1 * cr1;
   } else {
      norm[0] = cr2 * cphi;
      norm[1] = cr2 * sphi;
      norm[2] = -tg2 * cr2;
   }
 
   if (norm[0] * dir[0] + norm[1] * dir[1] + norm[2] * dir[2] < 0) {
      norm[0] = -norm[0];
      norm[1] = -norm[1];
      norm[2] = -norm[2];
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute normal to closest surface from POINT.
 
void TGeoConeSeg::ComputeNormalS(const Double_t *point, const Double_t *dir, Double_t *norm, Double_t dz,
                                 Double_t rmin1, Double_t rmax1, Double_t rmin2, Double_t rmax2, Double_t c1,
                                 Double_t s1, Double_t c2, Double_t s2)
{
   Double_t saf[2];
   Double_t ro1 = 0.5 * (rmin1 + rmin2);
   Double_t tg1 = 0.5 * (rmin2 - rmin1) / dz;
   Double_t cr1 = 1. / TMath::Sqrt(1. + tg1 * tg1);
   Double_t ro2 = 0.5 * (rmax1 + rmax2);
   Double_t tg2 = 0.5 * (rmax2 - rmax1) / dz;
   Double_t cr2 = 1. / TMath::Sqrt(1. + tg2 * tg2);
 
   Double_t r = TMath::Sqrt(point[0] * point[0] + point[1] * point[1]);
   Double_t rin = tg1 * point[2] + ro1;
   Double_t rout = tg2 * point[2] + ro2;
   saf[0] = (ro1 > 0) ? (TMath::Abs((r - rin) * cr1)) : TGeoShape::Big();
   saf[1] = TMath::Abs((rout - r) * cr2);
   Int_t i = TMath::LocMin(2, saf);
   if (TGeoShape::IsCloseToPhi(saf[i], point, c1, s1, c2, s2)) {
      TGeoShape::NormalPhi(point, dir, norm, c1, s1, c2, s2);
      return;
   }
 
   Double_t phi = TMath::ATan2(point[1], point[0]);
   Double_t cphi = TMath::Cos(phi);
   Double_t sphi = TMath::Sin(phi);
 
   if (i == 0) {
      norm[0] = cr1 * cphi;
      norm[1] = cr1 * sphi;
      norm[2] = -tg1 * cr1;
   } else {
      norm[0] = cr2 * cphi;
      norm[1] = cr2 * sphi;
      norm[2] = -tg2 * cr2;
   }
 
   if (norm[0] * dir[0] + norm[1] * dir[1] + norm[2] * dir[2] < 0) {
      norm[0] = -norm[0];
      norm[1] = -norm[1];
      norm[2] = -norm[2];
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// test if point is inside this sphere
 
Bool_t TGeoConeSeg::Contains(const Double_t *point) const
{
   if (!TGeoCone::Contains(point))
      return kFALSE;
   Double_t dphi = fPhi2 - fPhi1;
   if (dphi >= 360.)
      return kTRUE;
   Double_t phi = TMath::ATan2(point[1], point[0]) * TMath::RadToDeg();
   if (phi < 0)
      phi += 360.;
   Double_t ddp = phi - fPhi1;
   if (ddp < 0)
      ddp += 360.;
   //   if (ddp > 360) ddp-=360;
   if (ddp > dphi)
      return kFALSE;
   return kTRUE;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Static method to compute distance to a conical surface with :
/// - r1, z1 - radius and Z position of lower base
/// - r2, z2 - radius and Z position of upper base
/// - phi1, phi2 - phi limits
 
Double_t TGeoConeSeg::DistToCons(const Double_t *point, const Double_t *dir, Double_t r1, Double_t z1, Double_t r2,
                                 Double_t z2, Double_t phi1, Double_t phi2)
{
   Double_t dz = z2 - z1;
   if (dz <= 0) {
      return TGeoShape::Big();
   }
 
   Double_t dphi = phi2 - phi1;
   Bool_t hasphi = kTRUE;
   if (dphi >= 360.)
      hasphi = kFALSE;
   if (dphi < 0)
      dphi += 360.;
   //   printf("phi1=%f phi2=%f dphi=%f\n", phi1, phi2, dphi);
 
   Double_t ro0 = 0.5 * (r1 + r2);
   Double_t fz = (r2 - r1) / dz;
   Double_t r0sq = point[0] * point[0] + point[1] * point[1];
   Double_t rc = ro0 + fz * (point[2] - 0.5 * (z1 + z2));
 
   Double_t a = dir[0] * dir[0] + dir[1] * dir[1] - fz * fz * dir[2] * dir[2];
   Double_t b = point[0] * dir[0] + point[1] * dir[1] - fz * rc * dir[2];
   Double_t c = r0sq - rc * rc;
 
   if (a == 0)
      return TGeoShape::Big();
   a = 1. / a;
   b *= a;
   c *= a;
   Double_t delta = b * b - c;
   if (delta < 0)
      return TGeoShape::Big();
   delta = TMath::Sqrt(delta);
 
   Double_t snxt = -b - delta;
   Double_t ptnew[3];
   Double_t ddp, phi;
   if (snxt > 0) {
      // check Z range
      ptnew[2] = point[2] + snxt * dir[2];
      if (((ptnew[2] - z1) * (ptnew[2] - z2)) < 0) {
         // check phi range
         if (!hasphi)
            return snxt;
         ptnew[0] = point[0] + snxt * dir[0];
         ptnew[1] = point[1] + snxt * dir[1];
         phi = TMath::ATan2(ptnew[1], ptnew[0]) * TMath::RadToDeg();
         if (phi < 0)
            phi += 360.;
         ddp = phi - phi1;
         if (ddp < 0)
            ddp += 360.;
         // printf("snxt1=%f phi=%f ddp=%f\n", snxt, phi, ddp);
         if (ddp <= dphi)
            return snxt;
      }
   }
   snxt = -b + delta;
   if (snxt > 0) {
      // check Z range
      ptnew[2] = point[2] + snxt * dir[2];
      if (((ptnew[2] - z1) * (ptnew[2] - z2)) < 0) {
         // check phi range
         if (!hasphi)
            return snxt;
         ptnew[0] = point[0] + snxt * dir[0];
         ptnew[1] = point[1] + snxt * dir[1];
         phi = TMath::ATan2(ptnew[1], ptnew[0]) * TMath::RadToDeg();
         if (phi < 0)
            phi += 360.;
         ddp = phi - phi1;
         if (ddp < 0)
            ddp += 360.;
         // printf("snxt2=%f phi=%f ddp=%f\n", snxt, phi, ddp);
         if (ddp <= dphi)
            return snxt;
      }
   }
   return TGeoShape::Big();
}
 
////////////////////////////////////////////////////////////////////////////////
/// compute distance from inside point to surface of the tube segment
 
Double_t TGeoConeSeg::DistFromInsideS(const Double_t *point, const Double_t *dir, Double_t dz, Double_t rmin1,
                                      Double_t rmax1, Double_t rmin2, Double_t rmax2, Double_t c1, Double_t s1,
                                      Double_t c2, Double_t s2, Double_t cm, Double_t sm, Double_t cdfi)
{
   if (dz <= 0)
      return TGeoShape::Big();
   // Do Z
   Double_t scone = TGeoCone::DistFromInsideS(point, dir, dz, rmin1, rmax1, rmin2, rmax2);
   if (scone <= 0)
      return 0.0;
   Double_t sfmin = TGeoShape::Big();
   Double_t rsq = point[0] * point[0] + point[1] * point[1];
   Double_t r = TMath::Sqrt(rsq);
   Double_t cpsi = point[0] * cm + point[1] * sm;
   if (cpsi > r * cdfi + TGeoShape::Tolerance()) {
      sfmin = TGeoShape::DistToPhiMin(point, dir, s1, c1, s2, c2, sm, cm);
      return TMath::Min(scone, sfmin);
   }
   // Point on the phi boundary or outside
   // which one: phi1 or phi2
   Double_t ddotn, xi, yi;
   if (TMath::Abs(point[1] - s1 * r) < TMath::Abs(point[1] - s2 * r)) {
      ddotn = s1 * dir[0] - c1 * dir[1];
      if (ddotn >= 0)
         return 0.0;
      ddotn = -s2 * dir[0] + c2 * dir[1];
      if (ddotn <= 0)
         return scone;
      sfmin = s2 * point[0] - c2 * point[1];
      if (sfmin <= 0)
         return scone;
      sfmin /= ddotn;
      if (sfmin >= scone)
         return scone;
      xi = point[0] + sfmin * dir[0];
      yi = point[1] + sfmin * dir[1];
      if (yi * cm - xi * sm < 0)
         return scone;
      return sfmin;
   }
   ddotn = -s2 * dir[0] + c2 * dir[1];
   if (ddotn >= 0)
      return 0.0;
   ddotn = s1 * dir[0] - c1 * dir[1];
   if (ddotn <= 0)
      return scone;
   sfmin = -s1 * point[0] + c1 * point[1];
   if (sfmin <= 0)
      return scone;
   sfmin /= ddotn;
   if (sfmin >= scone)
      return scone;
   xi = point[0] + sfmin * dir[0];
   yi = point[1] + sfmin * dir[1];
   if (yi * cm - xi * sm > 0)
      return scone;
   return sfmin;
}
 
////////////////////////////////////////////////////////////////////////////////
/// compute distance from inside point to surface of the tube segment
 
Double_t
TGeoConeSeg::DistFromInside(const Double_t *point, const Double_t *dir, Int_t iact, Double_t step, Double_t *safe) const
{
   if (iact < 3 && safe) {
      *safe = TGeoConeSeg::SafetyS(point, kTRUE, fDz, fRmin1, fRmax1, fRmin2, fRmax2, fPhi1, fPhi2);
      if (iact == 0)
         return TGeoShape::Big();
      if ((iact == 1) && (*safe > step))
         return TGeoShape::Big();
   }
   if ((fPhi2 - fPhi1) >= 360.)
      return TGeoCone::DistFromInsideS(point, dir, fDz, fRmin1, fRmax1, fRmin2, fRmax2);
 
   // compute distance to surface
   return TGeoConeSeg::DistFromInsideS(point, dir, fDz, fRmin1, fRmax1, fRmin2, fRmax2, fC1, fS1, fC2, fS2, fCm, fSm,
                                       fCdfi);
}
 
////////////////////////////////////////////////////////////////////////////////
/// compute distance from outside point to surface of arbitrary tube
 
Double_t TGeoConeSeg::DistFromOutsideS(const Double_t *point, const Double_t *dir, Double_t dz, Double_t rmin1,
                                       Double_t rmax1, Double_t rmin2, Double_t rmax2, Double_t c1, Double_t s1,
                                       Double_t c2, Double_t s2, Double_t cm, Double_t sm, Double_t cdfi)
{
   if (dz <= 0)
      return TGeoShape::Big();
   Double_t r2, cpsi;
   // check Z planes
   Double_t xi, yi, zi;
   Double_t b, delta;
   zi = dz - TMath::Abs(point[2]);
   Double_t rin, rout;
   Double_t s = TGeoShape::Big();
   Double_t snxt = TGeoShape::Big();
   Bool_t in = kFALSE;
   Bool_t inz = (zi < 0) ? kFALSE : kTRUE;
   if (!inz) {
      if (point[2] * dir[2] >= 0)
         return TGeoShape::Big();
      s = -zi / TMath::Abs(dir[2]);
      xi = point[0] + s * dir[0];
      yi = point[1] + s * dir[1];
      r2 = xi * xi + yi * yi;
      if (dir[2] > 0) {
         rin = rmin1;
         rout = rmax1;
      } else {
         rin = rmin2;
         rout = rmax2;
      }
      if ((rin * rin <= r2) && (r2 <= rout * rout)) {
         cpsi = xi * cm + yi * sm;
         if (cpsi >= (cdfi * TMath::Sqrt(r2)))
            return s;
      }
   }
   Double_t zinv = 1. / dz;
   Double_t rsq = point[0] * point[0] + point[1] * point[1];
   Double_t r = TMath::Sqrt(rsq);
   Double_t ro1 = 0.5 * (rmin1 + rmin2);
   Bool_t hasrmin = (ro1 > 0) ? kTRUE : kFALSE;
   Double_t tg1 = 0.0;
   Bool_t inrmin = kFALSE;
   rin = 0.0;
   if (hasrmin) {
      tg1 = 0.5 * (rmin2 - rmin1) * zinv;
      rin = ro1 + tg1 * point[2];
      if (rsq > rin * (rin - TGeoShape::Tolerance()))
         inrmin = kTRUE;
   } else {
      inrmin = kTRUE;
   }
   Double_t ro2 = 0.5 * (rmax1 + rmax2);
   Double_t tg2 = 0.5 * (rmax2 - rmax1) * zinv;
   rout = ro2 + tg2 * point[2];
   Bool_t inrmax = kFALSE;
   if (r < rout + TGeoShape::Tolerance())
      inrmax = kTRUE;
   Bool_t inphi = kFALSE;
   cpsi = point[0] * cm + point[1] * sm;
   if (cpsi > r * cdfi - TGeoShape::Tolerance())
      inphi = kTRUE;
   in = inz & inrmin & inrmax & inphi;
   // If inside, we are most likely on a boundary within machine precision.
   if (in) {
      Double_t safphi = (cpsi - r * cdfi) * TMath::Sqrt(1. - cdfi * cdfi);
      Double_t safrmin = (hasrmin) ? TMath::Abs(r - rin) : (TGeoShape::Big());
      Double_t safrmax = TMath::Abs(r - rout);
      // check if on Z boundaries
      if (zi < safrmax && zi < safrmin && zi < safphi) {
         if (point[2] * dir[2] < 0)
            return 0.0;
         return TGeoShape::Big();
      }
      // check if on Rmax boundary
      if (safrmax < safrmin && safrmax < safphi) {
         Double_t ddotn = point[0] * dir[0] + point[1] * dir[1] - tg2 * dir[2] * r;
         if (ddotn <= 0)
            return 0.0;
         return TGeoShape::Big();
      }
      // check if on phi boundary
      if (safphi < safrmin) {
         // We may cross again a phi of rmin boundary
         // check first if we are on phi1 or phi2
         Double_t un;
         if (point[0] * c1 + point[1] * s1 > point[0] * c2 + point[1] * s2) {
            un = dir[0] * s1 - dir[1] * c1;
            if (un < 0)
               return 0.0;
            if (cdfi >= 0)
               return TGeoShape::Big();
            un = -dir[0] * s2 + dir[1] * c2;
            if (un < 0) {
               s = -point[0] * s2 + point[1] * c2;
               if (s > 0) {
                  s /= (-un);
                  zi = point[2] + s * dir[2];
                  if (TMath::Abs(zi) <= dz) {
                     xi = point[0] + s * dir[0];
                     yi = point[1] + s * dir[1];
                     if ((yi * cm - xi * sm) > 0) {
                        r2 = xi * xi + yi * yi;
                        rin = ro1 + tg1 * zi;
                        rout = ro2 + tg2 * zi;
                        if ((rin * rin <= r2) && (rout * rout >= r2))
                           return s;
                     }
                  }
               }
            }
         } else {
            un = -dir[0] * s2 + dir[1] * c2;
            if (un < 0)
               return 0.0;
            if (cdfi >= 0)
               return TGeoShape::Big();
            un = dir[0] * s1 - dir[1] * c1;
            if (un < 0) {
               s = point[0] * s1 - point[1] * c1;
               if (s > 0) {
                  s /= (-un);
                  zi = point[2] + s * dir[2];
                  if (TMath::Abs(zi) <= dz) {
                     xi = point[0] + s * dir[0];
                     yi = point[1] + s * dir[1];
                     if ((yi * cm - xi * sm) < 0) {
                        r2 = xi * xi + yi * yi;
                        rin = ro1 + tg1 * zi;
                        rout = ro2 + tg2 * zi;
                        if ((rin * rin <= r2) && (rout * rout >= r2))
                           return s;
                     }
                  }
               }
            }
         }
         // We may also cross rmin, second solution coming from outside
         Double_t ddotn = point[0] * dir[0] + point[1] * dir[1] - tg1 * dir[2] * r;
         if (ddotn >= 0)
            return TGeoShape::Big();
         if (cdfi >= 0)
            return TGeoShape::Big();
         TGeoCone::DistToCone(point, dir, dz, rmin1, rmin2, b, delta);
         if (delta < 0)
            return TGeoShape::Big();
         snxt = -b - delta;
         if (snxt < 0)
            return TGeoShape::Big();
         snxt = -b + delta;
         zi = point[2] + snxt * dir[2];
         if (TMath::Abs(zi) > dz)
            return TGeoShape::Big();
         xi = point[0] + snxt * dir[0];
         yi = point[1] + snxt * dir[1];
         r2 = xi * xi + yi * yi;
         cpsi = xi * cm + yi * sm;
         if (cpsi >= (cdfi * TMath::Sqrt(r2)))
            return snxt;
         return TGeoShape::Big();
      }
      // We are on rmin boundary: we may cross again rmin or a phi facette
      Double_t ddotn = point[0] * dir[0] + point[1] * dir[1] - tg1 * dir[2] * r;
      if (ddotn >= 0)
         return 0.0;
      TGeoCone::DistToCone(point, dir, dz, rmin1, rmin2, b, delta);
      if (delta < 0)
         return 0.0;
      snxt = -b + delta;
      if (snxt < 0)
         return TGeoShape::Big();
      if (TMath::Abs(-b - delta) > snxt)
         return TGeoShape::Big();
      zi = point[2] + snxt * dir[2];
      if (TMath::Abs(zi) > dz)
         return TGeoShape::Big();
      // OK, we cross rmin at snxt - check if within phi range
      xi = point[0] + snxt * dir[0];
      yi = point[1] + snxt * dir[1];
      r2 = xi * xi + yi * yi;
      cpsi = xi * cm + yi * sm;
      if (cpsi >= (cdfi * TMath::Sqrt(r2)))
         return snxt;
      // we cross rmin in the phi gap - we may cross a phi facette
      if (cdfi >= 0)
         return TGeoShape::Big();
      Double_t un = -dir[0] * s1 + dir[1] * c1;
      if (un > 0) {
         s = point[0] * s1 - point[1] * c1;
         if (s >= 0) {
            s /= un;
            zi = point[2] + s * dir[2];
            if (TMath::Abs(zi) <= dz) {
               xi = point[0] + s * dir[0];
               yi = point[1] + s * dir[1];
               if ((yi * cm - xi * sm) <= 0) {
                  r2 = xi * xi + yi * yi;
                  rin = ro1 + tg1 * zi;
                  rout = ro2 + tg2 * zi;
                  if ((rin * rin <= r2) && (rout * rout >= r2))
                     return s;
               }
            }
         }
      }
      un = dir[0] * s2 - dir[1] * c2;
      if (un > 0) {
         s = (point[1] * c2 - point[0] * s2) / un;
         if (s >= 0) {
            zi = point[2] + s * dir[2];
            if (TMath::Abs(zi) <= dz) {
               xi = point[0] + s * dir[0];
               yi = point[1] + s * dir[1];
               if ((yi * cm - xi * sm) >= 0) {
                  r2 = xi * xi + yi * yi;
                  rin = ro1 + tg1 * zi;
                  rout = ro2 + tg2 * zi;
                  if ((rin * rin <= r2) && (rout * rout >= r2))
                     return s;
               }
            }
         }
      }
      return TGeoShape::Big();
   }
 
   // The point is really outside
   Double_t sr1 = TGeoShape::Big();
   if (!inrmax) {
      // check crossing with outer cone
      TGeoCone::DistToCone(point, dir, dz, rmax1, rmax2, b, delta);
      if (delta >= 0) {
         s = -b - delta;
         if (s > 0) {
            zi = point[2] + s * dir[2];
            if (TMath::Abs(zi) <= dz) {
               xi = point[0] + s * dir[0];
               yi = point[1] + s * dir[1];
               r2 = xi * xi + yi * yi;
               cpsi = xi * cm + yi * sm;
               if (cpsi >= (cdfi * TMath::Sqrt(r2)))
                  return s; // rmax crossing
            }
         }
         s = -b + delta;
         if (s > 0) {
            zi = point[2] + s * dir[2];
            if (TMath::Abs(zi) <= dz) {
               xi = point[0] + s * dir[0];
               yi = point[1] + s * dir[1];
               r2 = xi * xi + yi * yi;
               cpsi = xi * cm + yi * sm;
               if (cpsi >= (cdfi * TMath::Sqrt(r2)))
                  sr1 = s;
            }
         }
      }
   }
   // check crossing with inner cone
   Double_t sr2 = TGeoShape::Big();
   TGeoCone::DistToCone(point, dir, dz, rmin1, rmin2, b, delta);
   if (delta >= 0) {
      s = -b - delta;
      if (s > 0) {
         zi = point[2] + s * dir[2];
         if (TMath::Abs(zi) <= dz) {
            xi = point[0] + s * dir[0];
            yi = point[1] + s * dir[1];
            r2 = xi * xi + yi * yi;
            cpsi = xi * cm + yi * sm;
            if (cpsi >= (cdfi * TMath::Sqrt(r2)))
               sr2 = s;
         }
      }
      if (sr2 > 1E10) {
         s = -b + delta;
         if (s > 0) {
            zi = point[2] + s * dir[2];
            if (TMath::Abs(zi) <= dz) {
               xi = point[0] + s * dir[0];
               yi = point[1] + s * dir[1];
               r2 = xi * xi + yi * yi;
               cpsi = xi * cm + yi * sm;
               if (cpsi >= (cdfi * TMath::Sqrt(r2)))
                  sr2 = s;
            }
         }
      }
   }
   snxt = TMath::Min(sr1, sr2);
   // Check phi crossing
   s = TGeoShape::DistToPhiMin(point, dir, s1, c1, s2, c2, sm, cm, kFALSE);
   if (s > snxt)
      return snxt;
   zi = point[2] + s * dir[2];
   if (TMath::Abs(zi) > dz)
      return snxt;
   xi = point[0] + s * dir[0];
   yi = point[1] + s * dir[1];
   r2 = xi * xi + yi * yi;
   rout = ro2 + tg2 * zi;
   if (r2 > rout * rout)
      return snxt;
   rin = ro1 + tg1 * zi;
   if (r2 >= rin * rin)
      return s; // phi crossing
   return snxt;
}
 
////////////////////////////////////////////////////////////////////////////////
/// compute distance from outside point to surface of the tube
 
Double_t TGeoConeSeg::DistFromOutside(const Double_t *point, const Double_t *dir, Int_t iact, Double_t step,
                                      Double_t *safe) const
{
   // compute safe radius
   if (iact < 3 && safe) {
      *safe = Safety(point, kFALSE);
      if (iact == 0)
         return TGeoShape::Big();
      if ((iact == 1) && (*safe > step))
         return TGeoShape::Big();
   }
   // Check if the bounding box is crossed within the requested distance
   Double_t sdist = TGeoBBox::DistFromOutside(point, dir, fDX, fDY, fDZ, fOrigin, step);
   if (sdist >= step)
      return TGeoShape::Big();
   if ((fPhi2 - fPhi1) >= 360.)
      return TGeoCone::DistFromOutsideS(point, dir, fDz, fRmin1, fRmax1, fRmin2, fRmax2);
   return TGeoConeSeg::DistFromOutsideS(point, dir, fDz, fRmin1, fRmax1, fRmin2, fRmax2, fC1, fS1, fC2, fS2, fCm, fSm,
                                        fCdfi);
}
 
////////////////////////////////////////////////////////////////////////////////
/// compute closest distance from point px,py to each corner
 
Int_t TGeoConeSeg::DistancetoPrimitive(Int_t px, Int_t py)
{
   Int_t n = gGeoManager->GetNsegments() + 1;
   const Int_t numPoints = 4 * n;
   return ShapeDistancetoPrimitive(numPoints, px, py);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Divide this cone segment shape belonging to volume "voldiv" into ndiv volumes
/// called divname, from start position with the given step. Returns pointer
/// to created division cell volume in case of Z divisions. For Z division
/// creates all volumes with different shapes and returns pointer to volume that
/// was divided. In case a wrong division axis is supplied, returns pointer to
/// volume that was divided.
 
TGeoVolume *
TGeoConeSeg::Divide(TGeoVolume *voldiv, const char *divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step)
{
   TGeoShape *shape;          //--- shape to be created
   TGeoVolume *vol;           //--- division volume to be created
   TGeoVolumeMulti *vmulti;   //--- generic divided volume
   TGeoPatternFinder *finder; //--- finder to be attached
   TString opt = "";          //--- option to be attached
   Double_t dphi;
   Int_t id;
   Double_t end = start + ndiv * step;
   switch (iaxis) {
   case 1: //---               R division
      Error("Divide", "division of a cone segment on R not implemented");
      return 0;
   case 2: //---               Phi division
      dphi = fPhi2 - fPhi1;
      if (dphi < 0)
         dphi += 360.;
      finder = new TGeoPatternCylPhi(voldiv, ndiv, start, end);
      voldiv->SetFinder(finder);
      finder->SetDivIndex(voldiv->GetNdaughters());
      shape = new TGeoConeSeg(fDz, fRmin1, fRmax1, fRmin2, fRmax2, -step / 2, step / 2);
      vol = new TGeoVolume(divname, shape, voldiv->GetMedium());
      vmulti = gGeoManager->MakeVolumeMulti(divname, voldiv->GetMedium());
      vmulti->AddVolume(vol);
      opt = "Phi";
      for (id = 0; id < ndiv; id++) {
         voldiv->AddNodeOffset(vol, id, start + id * step + step / 2, opt.Data());
         ((TGeoNodeOffset *)voldiv->GetNodes()->At(voldiv->GetNdaughters() - 1))->SetFinder(finder);
      }
      return vmulti;
   case 3: //---                 Z division
      finder = new TGeoPatternZ(voldiv, ndiv, start, end);
      vmulti = gGeoManager->MakeVolumeMulti(divname, voldiv->GetMedium());
      voldiv->SetFinder(finder);
      finder->SetDivIndex(voldiv->GetNdaughters());
      for (id = 0; id < ndiv; id++) {
         Double_t z1 = start + id * step;
         Double_t z2 = start + (id + 1) * step;
         Double_t rmin1n = 0.5 * (fRmin1 * (fDz - z1) + fRmin2 * (fDz + z1)) / fDz;
         Double_t rmax1n = 0.5 * (fRmax1 * (fDz - z1) + fRmax2 * (fDz + z1)) / fDz;
         Double_t rmin2n = 0.5 * (fRmin1 * (fDz - z2) + fRmin2 * (fDz + z2)) / fDz;
         Double_t rmax2n = 0.5 * (fRmax1 * (fDz - z2) + fRmax2 * (fDz + z2)) / fDz;
         shape = new TGeoConeSeg(step / 2, rmin1n, rmax1n, rmin2n, rmax2n, fPhi1, fPhi2);
         vol = new TGeoVolume(divname, shape, voldiv->GetMedium());
         vmulti->AddVolume(vol);
         opt = "Z";
         voldiv->AddNodeOffset(vol, id, start + id * step + step / 2, opt.Data());
         ((TGeoNodeOffset *)voldiv->GetNodes()->At(voldiv->GetNdaughters() - 1))->SetFinder(finder);
      }
      return vmulti;
   default: Error("Divide", "Wrong axis type for division"); return 0;
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Get range of shape for a given axis.
 
Double_t TGeoConeSeg::GetAxisRange(Int_t iaxis, Double_t &xlo, Double_t &xhi) const
{
   xlo = 0;
   xhi = 0;
   Double_t dx = 0;
   switch (iaxis) {
   case 2:
      xlo = fPhi1;
      xhi = fPhi2;
      dx = xhi - xlo;
      return dx;
   case 3:
      xlo = -fDz;
      xhi = fDz;
      dx = xhi - xlo;
      return dx;
   }
   return dx;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fill vector param[4] with the bounding cylinder parameters. The order
/// is the following : Rmin, Rmax, Phi1, Phi2
 
void TGeoConeSeg::GetBoundingCylinder(Double_t *param) const
{
   param[0] = TMath::Min(fRmin1, fRmin2); // Rmin
   param[0] *= param[0];
   param[1] = TMath::Max(fRmax1, fRmax2); // Rmax
   param[1] *= param[1];
   param[2] = (fPhi1 < 0) ? (fPhi1 + 360.) : fPhi1; // Phi1
   param[3] = fPhi2;                                // Phi2
   while (param[3] < param[2])
      param[3] += 360.;
}
 
////////////////////////////////////////////////////////////////////////////////
/// in case shape has some negative parameters, these has to be computed
/// in order to fit the mother
 
TGeoShape *TGeoConeSeg::GetMakeRuntimeShape(TGeoShape *mother, TGeoMatrix * /*mat*/) const
{
   if (!TestShapeBit(kGeoRunTimeShape))
      return 0;
   if (!mother->TestShapeBit(kGeoConeSeg)) {
      Error("GetMakeRuntimeShape", "invalid mother");
      return 0;
   }
   Double_t rmin1, rmax1, rmin2, rmax2, dz;
   rmin1 = fRmin1;
   rmax1 = fRmax1;
   rmin2 = fRmin2;
   rmax2 = fRmax2;
   dz = fDz;
   if (fDz < 0)
      dz = ((TGeoCone *)mother)->GetDz();
   if (fRmin1 < 0)
      rmin1 = ((TGeoCone *)mother)->GetRmin1();
   if ((fRmax1 < 0) || (fRmax1 < fRmin1))
      rmax1 = ((TGeoCone *)mother)->GetRmax1();
   if (fRmin2 < 0)
      rmin2 = ((TGeoCone *)mother)->GetRmin2();
   if ((fRmax2 < 0) || (fRmax2 < fRmin2))
      rmax2 = ((TGeoCone *)mother)->GetRmax2();
 
   return (new TGeoConeSeg(GetName(), dz, rmin1, rmax1, rmin2, rmax2, fPhi1, fPhi2));
}
 
////////////////////////////////////////////////////////////////////////////////
/// print shape parameters
 
void TGeoConeSeg::InspectShape() const
{
   printf("*** Shape %s: TGeoConeSeg ***\n", GetName());
   printf("    dz    = %11.5f\n", fDz);
   printf("    Rmin1 = %11.5f\n", fRmin1);
   printf("    Rmax1 = %11.5f\n", fRmax1);
   printf("    Rmin2 = %11.5f\n", fRmin2);
   printf("    Rmax2 = %11.5f\n", fRmax2);
   printf("    phi1  = %11.5f\n", fPhi1);
   printf("    phi2  = %11.5f\n", fPhi2);
   printf(" Bounding box:\n");
   TGeoBBox::InspectShape();
}
 
///////////////////////////////////////////////////////////////////////////////
/// Creates a TBuffer3D describing *this* shape.
/// Coordinates are in local reference frame.
 
TBuffer3D *TGeoConeSeg::MakeBuffer3D() const
{
   Int_t n = gGeoManager->GetNsegments() + 1;
   Int_t nbPnts = 4 * n;
   Int_t nbSegs = 2 * nbPnts;
   Int_t nbPols = nbPnts - 2;
   TBuffer3D *buff =
      new TBuffer3D(TBuffer3DTypes::kGeneric, nbPnts, 3 * nbPnts, nbSegs, 3 * nbSegs, nbPols, 6 * nbPols);
 
   if (buff) {
      SetPoints(buff->fPnts);
      SetSegsAndPols(*buff);
   }
 
   return buff;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fill TBuffer3D structure for segments and polygons.
 
void TGeoConeSeg::SetSegsAndPols(TBuffer3D &buffer) const
{
   Int_t i, j;
   Int_t n = gGeoManager->GetNsegments() + 1;
   Int_t c = GetBasicColor();
 
   memset(buffer.fSegs, 0, buffer.NbSegs() * 3 * sizeof(Int_t));
   for (i = 0; i < 4; i++) {
      for (j = 1; j < n; j++) {
         buffer.fSegs[(i * n + j - 1) * 3] = c;
         buffer.fSegs[(i * n + j - 1) * 3 + 1] = i * n + j - 1;
         buffer.fSegs[(i * n + j - 1) * 3 + 2] = i * n + j;
      }
   }
   for (i = 4; i < 6; i++) {
      for (j = 0; j < n; j++) {
         buffer.fSegs[(i * n + j) * 3] = c + 1;
         buffer.fSegs[(i * n + j) * 3 + 1] = (i - 4) * n + j;
         buffer.fSegs[(i * n + j) * 3 + 2] = (i - 2) * n + j;
      }
   }
   for (i = 6; i < 8; i++) {
      for (j = 0; j < n; j++) {
         buffer.fSegs[(i * n + j) * 3] = c;
         buffer.fSegs[(i * n + j) * 3 + 1] = 2 * (i - 6) * n + j;
         buffer.fSegs[(i * n + j) * 3 + 2] = (2 * (i - 6) + 1) * n + j;
      }
   }
 
   Int_t indx = 0;
   memset(buffer.fPols, 0, buffer.NbPols() * 6 * sizeof(Int_t));
   i = 0;
   for (j = 0; j < n - 1; j++) {
      buffer.fPols[indx++] = c;
      buffer.fPols[indx++] = 4;
      buffer.fPols[indx++] = (4 + i) * n + j + 1;
      buffer.fPols[indx++] = (2 + i) * n + j;
      buffer.fPols[indx++] = (4 + i) * n + j;
      buffer.fPols[indx++] = i * n + j;
   }
   i = 1;
   for (j = 0; j < n - 1; j++) {
      buffer.fPols[indx++] = c;
      buffer.fPols[indx++] = 4;
      buffer.fPols[indx++] = i * n + j;
      buffer.fPols[indx++] = (4 + i) * n + j;
      buffer.fPols[indx++] = (2 + i) * n + j;
      buffer.fPols[indx++] = (4 + i) * n + j + 1;
   }
   i = 2;
   for (j = 0; j < n - 1; j++) {
      buffer.fPols[indx++] = c + i;
      buffer.fPols[indx++] = 4;
      buffer.fPols[indx++] = (i - 2) * 2 * n + j;
      buffer.fPols[indx++] = (4 + i) * n + j;
      buffer.fPols[indx++] = ((i - 2) * 2 + 1) * n + j;
      buffer.fPols[indx++] = (4 + i) * n + j + 1;
   }
   i = 3;
   for (j = 0; j < n - 1; j++) {
      buffer.fPols[indx++] = c + i;
      buffer.fPols[indx++] = 4;
      buffer.fPols[indx++] = (4 + i) * n + j + 1;
      buffer.fPols[indx++] = ((i - 2) * 2 + 1) * n + j;
      buffer.fPols[indx++] = (4 + i) * n + j;
      buffer.fPols[indx++] = (i - 2) * 2 * n + j;
   }
   buffer.fPols[indx++] = c + 2;
   buffer.fPols[indx++] = 4;
   buffer.fPols[indx++] = 6 * n;
   buffer.fPols[indx++] = 4 * n;
   buffer.fPols[indx++] = 7 * n;
   buffer.fPols[indx++] = 5 * n;
   buffer.fPols[indx++] = c + 2;
   buffer.fPols[indx++] = 4;
   buffer.fPols[indx++] = 6 * n - 1;
   buffer.fPols[indx++] = 8 * n - 1;
   buffer.fPols[indx++] = 5 * n - 1;
   buffer.fPols[indx++] = 7 * n - 1;
}
 
////////////////////////////////////////////////////////////////////////////////
/// computes the closest distance from given point to this shape, according
/// to option. The matching point on the shape is stored in spoint.
 
Double_t TGeoConeSeg::Safety(const Double_t *point, Bool_t in) const
{
   Double_t safe = TGeoCone::Safety(point, in);
   if ((fPhi2 - fPhi1) >= 360.)
      return safe;
   Double_t safphi = TGeoShape::SafetyPhi(point, in, fPhi1, fPhi2);
   if (in)
      return TMath::Min(safe, safphi);
   if (safe > 1.E10)
      return safphi;
   return TMath::Max(safe, safphi);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Static method to compute the closest distance from given point to this shape.
 
Double_t TGeoConeSeg::SafetyS(const Double_t *point, Bool_t in, Double_t dz, Double_t rmin1, Double_t rmax1,
                              Double_t rmin2, Double_t rmax2, Double_t phi1, Double_t phi2, Int_t skipz)
{
   Double_t safe = TGeoCone::SafetyS(point, in, dz, rmin1, rmax1, rmin2, rmax2, skipz);
   if ((phi2 - phi1) >= 360.)
      return safe;
   Double_t safphi = TGeoShape::SafetyPhi(point, in, phi1, phi2);
   if (in)
      return TMath::Min(safe, safphi);
   if (safe > 1.E10)
      return safphi;
   return TMath::Max(safe, safphi);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Save a primitive as a C++ statement(s) on output stream "out".
 
void TGeoConeSeg::SavePrimitive(std::ostream &out, Option_t * /*option*/ /*= ""*/)
{
   if (TObject::TestBit(kGeoSavePrimitive))
      return;
   out << "   // Shape: " << GetName() << " type: " << ClassName() << std::endl;
   out << "   dz    = " << fDz << ";" << std::endl;
   out << "   rmin1 = " << fRmin1 << ";" << std::endl;
   out << "   rmax1 = " << fRmax1 << ";" << std::endl;
   out << "   rmin2 = " << fRmin2 << ";" << std::endl;
   out << "   rmax2 = " << fRmax2 << ";" << std::endl;
   out << "   phi1  = " << fPhi1 << ";" << std::endl;
   out << "   phi2  = " << fPhi2 << ";" << std::endl;
   out << "   TGeoShape *" << GetPointerName() << " = new TGeoConeSeg(\"" << GetName()
       << "\", dz,rmin1,rmax1,rmin2,rmax2,phi1,phi2);" << std::endl;
   TObject::SetBit(TGeoShape::kGeoSavePrimitive);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Set dimensions of the cone segment.
 
void TGeoConeSeg::SetConsDimensions(Double_t dz, Double_t rmin1, Double_t rmax1, Double_t rmin2, Double_t rmax2,
                                    Double_t phi1, Double_t phi2)
{
   fDz = dz;
   fRmin1 = rmin1;
   fRmax1 = rmax1;
   fRmin2 = rmin2;
   fRmax2 = rmax2;
   fPhi1 = phi1;
   while (fPhi1 < 0)
      fPhi1 += 360.;
   fPhi2 = phi2;
   while (fPhi2 <= fPhi1)
      fPhi2 += 360.;
   if (TGeoShape::IsSameWithinTolerance(fPhi1, fPhi2))
      Fatal("SetConsDimensions", "In shape %s invalid phi1=%g, phi2=%g\n", GetName(), fPhi1, fPhi2);
   InitTrigonometry();
}
 
////////////////////////////////////////////////////////////////////////////////
/// Set dimensions of the cone segment from an array.
 
void TGeoConeSeg::SetDimensions(Double_t *param)
{
   Double_t dz = param[0];
   Double_t rmin1 = param[1];
   Double_t rmax1 = param[2];
   Double_t rmin2 = param[3];
   Double_t rmax2 = param[4];
   Double_t phi1 = param[5];
   Double_t phi2 = param[6];
   SetConsDimensions(dz, rmin1, rmax1, rmin2, rmax2, phi1, phi2);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Create cone segment mesh points.
 
void TGeoConeSeg::SetPoints(Double_t *points) const
{
   Int_t j, n;
   Float_t dphi, phi, phi1, phi2, dz;
 
   n = gGeoManager->GetNsegments() + 1;
   dz = fDz;
   phi1 = fPhi1;
   phi2 = fPhi2;
 
   dphi = (phi2 - phi1) / (n - 1);
 
   Int_t indx = 0;
 
   if (points) {
      for (j = 0; j < n; j++) {
         phi = (fPhi1 + j * dphi) * TMath::DegToRad();
         points[indx++] = fRmin1 * TMath::Cos(phi);
         points[indx++] = fRmin1 * TMath::Sin(phi);
         points[indx++] = -dz;
      }
      for (j = 0; j < n; j++) {
         phi = (fPhi1 + j * dphi) * TMath::DegToRad();
         points[indx++] = fRmax1 * TMath::Cos(phi);
         points[indx++] = fRmax1 * TMath::Sin(phi);
         points[indx++] = -dz;
      }
      for (j = 0; j < n; j++) {
         phi = (fPhi1 + j * dphi) * TMath::DegToRad();
         points[indx++] = fRmin2 * TMath::Cos(phi);
         points[indx++] = fRmin2 * TMath::Sin(phi);
         points[indx++] = dz;
      }
      for (j = 0; j < n; j++) {
         phi = (fPhi1 + j * dphi) * TMath::DegToRad();
         points[indx++] = fRmax2 * TMath::Cos(phi);
         points[indx++] = fRmax2 * TMath::Sin(phi);
         points[indx++] = dz;
      }
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Create cone segment mesh points.
 
void TGeoConeSeg::SetPoints(Float_t *points) const
{
   Int_t j, n;
   Float_t dphi, phi, phi1, phi2, dz;
 
   n = gGeoManager->GetNsegments() + 1;
   dz = fDz;
   phi1 = fPhi1;
   phi2 = fPhi2;
 
   dphi = (phi2 - phi1) / (n - 1);
 
   Int_t indx = 0;
 
   if (points) {
      for (j = 0; j < n; j++) {
         phi = (fPhi1 + j * dphi) * TMath::DegToRad();
         points[indx++] = fRmin1 * TMath::Cos(phi);
         points[indx++] = fRmin1 * TMath::Sin(phi);
         points[indx++] = -dz;
      }
      for (j = 0; j < n; j++) {
         phi = (fPhi1 + j * dphi) * TMath::DegToRad();
         points[indx++] = fRmax1 * TMath::Cos(phi);
         points[indx++] = fRmax1 * TMath::Sin(phi);
         points[indx++] = -dz;
      }
      for (j = 0; j < n; j++) {
         phi = (fPhi1 + j * dphi) * TMath::DegToRad();
         points[indx++] = fRmin2 * TMath::Cos(phi);
         points[indx++] = fRmin2 * TMath::Sin(phi);
         points[indx++] = dz;
      }
      for (j = 0; j < n; j++) {
         phi = (fPhi1 + j * dphi) * TMath::DegToRad();
         points[indx++] = fRmax2 * TMath::Cos(phi);
         points[indx++] = fRmax2 * TMath::Sin(phi);
         points[indx++] = dz;
      }
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Returns numbers of vertices, segments and polygons composing the shape mesh.
 
void TGeoConeSeg::GetMeshNumbers(Int_t &nvert, Int_t &nsegs, Int_t &npols) const
{
   Int_t n = gGeoManager->GetNsegments() + 1;
   nvert = n * 4;
   nsegs = n * 8;
   npols = n * 4 - 2;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Return number of vertices of the mesh representation
 
Int_t TGeoConeSeg::GetNmeshVertices() const
{
   Int_t n = gGeoManager->GetNsegments() + 1;
   Int_t numPoints = n * 4;
   return numPoints;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fill size of this 3-D object
 
void TGeoConeSeg::Sizeof3D() const {}
 
////////////////////////////////////////////////////////////////////////////////
/// Fills a static 3D buffer and returns a reference.
 
const TBuffer3D &TGeoConeSeg::GetBuffer3D(Int_t reqSections, Bool_t localFrame) const
{
   static TBuffer3D buffer(TBuffer3DTypes::kGeneric);
 
   TGeoBBox::FillBuffer3D(buffer, reqSections, localFrame);
 
   if (reqSections & TBuffer3D::kRawSizes) {
      Int_t n = gGeoManager->GetNsegments() + 1;
      Int_t nbPnts = 4 * n;
      Int_t nbSegs = 2 * nbPnts;
      Int_t nbPols = nbPnts - 2;
      if (buffer.SetRawSizes(nbPnts, 3 * nbPnts, nbSegs, 3 * nbSegs, nbPols, 6 * nbPols)) {
         buffer.SetSectionsValid(TBuffer3D::kRawSizes);
      }
   }
   if ((reqSections & TBuffer3D::kRaw) && buffer.SectionsValid(TBuffer3D::kRawSizes)) {
      SetPoints(buffer.fPnts);
      if (!buffer.fLocalFrame) {
         TransformPoints(buffer.fPnts, buffer.NbPnts());
      }
 
      SetSegsAndPols(buffer);
      buffer.SetSectionsValid(TBuffer3D::kRaw);
   }
 
   return buffer;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fills array with n random points located on the line segments of the shape mesh.
/// The output array must be provided with a length of minimum 3*npoints. Returns
/// true if operation is implemented.
 
Bool_t TGeoConeSeg::GetPointsOnSegments(Int_t npoints, Double_t *array) const
{
   if (npoints > (npoints / 2) * 2) {
      Error("GetPointsOnSegments", "Npoints must be even number");
      return kFALSE;
   }
   Int_t nc = (Int_t)TMath::Sqrt(0.5 * npoints);
   Double_t dphi = (fPhi2 - fPhi1) * TMath::DegToRad() / (nc - 1);
   Double_t phi = 0;
   Double_t phi1 = fPhi1 * TMath::DegToRad();
   Int_t ntop = npoints / 2 - nc * (nc - 1);
   Double_t dz = 2 * fDz / (nc - 1);
   Double_t z = 0;
   Double_t rmin = 0.;
   Double_t rmax = 0.;
   Int_t icrt = 0;
   Int_t nphi = nc;
   // loop z sections
   for (Int_t i = 0; i < nc; i++) {
      if (i == (nc - 1)) {
         nphi = ntop;
         dphi = (fPhi2 - fPhi1) * TMath::DegToRad() / (nphi - 1);
      }
      z = -fDz + i * dz;
      rmin = 0.5 * (fRmin1 + fRmin2) + 0.5 * (fRmin2 - fRmin1) * z / fDz;
      rmax = 0.5 * (fRmax1 + fRmax2) + 0.5 * (fRmax2 - fRmax1) * z / fDz;
      // loop points on circle sections
      for (Int_t j = 0; j < nphi; j++) {
         phi = phi1 + j * dphi;
         array[icrt++] = rmin * TMath::Cos(phi);
         array[icrt++] = rmin * TMath::Sin(phi);
         array[icrt++] = z;
         array[icrt++] = rmax * TMath::Cos(phi);
         array[icrt++] = rmax * TMath::Sin(phi);
         array[icrt++] = z;
      }
   }
   return kTRUE;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Check the inside status for each of the points in the array.
/// Input: Array of point coordinates + vector size
/// Output: Array of Booleans for the inside of each point
 
void TGeoConeSeg::Contains_v(const Double_t *points, Bool_t *inside, Int_t vecsize) const
{
   for (Int_t i = 0; i < vecsize; i++)
      inside[i] = Contains(&points[3 * i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute the normal for an array o points so that norm.dot.dir is positive
/// Input: Arrays of point coordinates and directions + vector size
/// Output: Array of normal directions
 
void TGeoConeSeg::ComputeNormal_v(const Double_t *points, const Double_t *dirs, Double_t *norms, Int_t vecsize)
{
   for (Int_t i = 0; i < vecsize; i++)
      ComputeNormal(&points[3 * i], &dirs[3 * i], &norms[3 * i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from array of input points having directions specified by dirs. Store output in dists
 
void TGeoConeSeg::DistFromInside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize,
                                   Double_t *step) const
{
   for (Int_t i = 0; i < vecsize; i++)
      dists[i] = DistFromInside(&points[3 * i], &dirs[3 * i], 3, step[i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from array of input points having directions specified by dirs. Store output in dists
 
void TGeoConeSeg::DistFromOutside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize,
                                    Double_t *step) const
{
   for (Int_t i = 0; i < vecsize; i++)
      dists[i] = DistFromOutside(&points[3 * i], &dirs[3 * i], 3, step[i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute safe distance from each of the points in the input array.
/// Input: Array of point coordinates, array of statuses for these points, size of the arrays
/// Output: Safety values
 
void TGeoConeSeg::Safety_v(const Double_t *points, const Bool_t *inside, Double_t *safe, Int_t vecsize) const
{
   for (Int_t i = 0; i < vecsize; i++)
      safe[i] = Safety(&points[3 * i], inside[i]);
}