PDF for the numerical (FFT) convolution of two PDFs.
This class implements a generic one-dimensional numeric convolution of two PDFs, and can convolve any two RooAbsPdfs.
The class exploits the convolution theorem
\[ f(x) * g(x) \rightarrow F(k_i) \cdot G(k_i) \]
to calculate the convolution by calculating a Real->Complex FFT of both input PDFs, multiplying the complex coefficients and performing the reverse Complex->Real FFT to get the result in the input space. This class uses the ROOT FFT interface to the (free) FFTW3 package (www.fftw.org), and requires that your ROOT installation is compiled with the fftw3=ON
(default). Instructions for manually installing fftw below.
Note that the performance in terms of speed and stability of RooFFTConvPdf is vastly superior to that of RooNumConvPdf.
An important feature of FFT convolutions is that the observable is assumed to be cyclical. This is correct for cyclical observables such as angles, but does not hold in general. For non-cyclical variables, wrap-around artifacts may be encountered, e.g. if the PDF is zero at xMin and non-zero at xMax. A rising tail may appear at xMin. This is inevitable when using FFTs. A distribution with 3 bins therefore looks like:
Therefore, if bins 0 and 2 are not equal, the FFT sees a cyclical function with a step at the 2|0 boundary, which causes artifacts in Fourier space.
The spillover or discontinuity can be reduced or eliminated by introducing a buffer zone in the FFT calculation. If this feature is activated (on by default), the sampling array for the FFT calculation is extended in both directions, and padded with the lowest/highest bin. Example:
The buffer bins are stripped away when the FFT output values are transferred back to the p.d.f cache. The default buffer size is 10% of the observable domain size, and can be changed with the setBufferFraction()
member function.
The RooFFTConvPdf uses caching inherited from a RooAbsCachedPdf. If it is evaluated for a particular value of x, the FFT and convolution is calculated for all bins in the observable space for the given choice of parameters, which are also stored in the cache. Subsequent evaluations for different values of the convolution observable and identical parameters will be retrieved from the cache. If one or more of the parameters change, the cache will be updated, i.e., a new FFT runs.
The sampling density of the FFT is controlled by the binning of the the convolution observable, which can be changed using RooRealVar::setBins(N). For good results, N should be large (>=1000). Additional interpolation between the bins may improve the result if coarse binnings are chosen. These can be activated in the constructor or by calling setInterpolationOrder()
. For N >> 1000, interpolation will not substantially improve the accuracy.
Additionial information on caching can be displayed by monitoring the message stream with topic "Caching" at the INFO level, i.e. by calling RooMsgService::instance().addStream(RooMsgService::INFO,Topic("Caching"))
to see these message on stdout.
Multi-dimensional convolutions are not supported at the moment.
You have two options:
builtin_fftw3
at https://root.cern.ch/building-rootfftw3
is on by default (see https://root.cern.ch/building-root)1) Go to www.fftw.org and download the latest stable version (a .tar.gz file)
If you have root access to your machine and want to make a system installation of FFTW
2) Untar fftw-XXX.tar.gz in /tmp, cd into the untarred directory and type './configure' followed by 'make install'. This will install fftw in /usr/local/bin,lib etc...
3) Start from a source installation of ROOT. ROOT should discover it. See https://root.cern.ch/building-root
If you do not have root access and want to make a private installation of FFTW
2) Make a private install area for FFTW, e.g. /home/myself/fftw
3) Untar fftw-XXX.tar.gz in /tmp, cd into the untarred directory and type './configure –prefix=/home/myself/fftw' followed by 'make install'. Substitute /home/myself/fftw with a directory of your choice. This procedure will install FFTW in the location designated by you
4) Start from a source installation of ROOT. Look up and set the proper paths for ROOT to discover FFTW. See https://root.cern.ch/building-root
Definition at line 25 of file RooFFTConvPdf.h.
Classes | |
class | FFTCacheElem |
Public Member Functions | |
RooFFTConvPdf () | |
RooFFTConvPdf (const char *name, const char *title, RooAbsReal &pdfConvVar, RooRealVar &convVar, RooAbsPdf &pdf1, RooAbsPdf &pdf2, Int_t ipOrder=2) | |
Constructor for numerical (FFT) convolution of PDFs. | |
RooFFTConvPdf (const char *name, const char *title, RooRealVar &convVar, RooAbsPdf &pdf1, RooAbsPdf &pdf2, Int_t ipOrder=2) | |
Constructor for numerical (FFT) convolution of PDFs. | |
RooFFTConvPdf (const RooFFTConvPdf &other, const char *name=0) | |
Copy constructor. | |
virtual | ~RooFFTConvPdf () |
Destructor. | |
Double_t | bufferFraction () const |
BufStrat | bufferStrategy () const |
const RooArgSet & | cacheObservables () const |
virtual TObject * | clone (const char *newname) const |
virtual Int_t | getMaxVal (const RooArgSet &vars) const |
Advertise capability to determine maximum value of function for given set of observables. | |
virtual Double_t | maxVal (Int_t code) const |
Return maximum value for set of observables identified by code assigned in getMaxVal. | |
void | printMetaArgs (std::ostream &os) const |
Customized printing of arguments of a RooNumConvPdf to more intuitively reflect the contents of the product operator construction. | |
void | setBufferFraction (Double_t frac) |
Change the size of the buffer on either side of the observable range to frac times the size of the range of the convolution observable. | |
void | setBufferStrategy (BufStrat bs) |
Change strategy to fill the overflow buffer on either side of the convolution observable range. | |
void | setCacheObservables (const RooArgSet &obs) |
void | setShift (Double_t val1, Double_t val2) |
Public Member Functions inherited from RooAbsCachedPdf | |
RooAbsCachedPdf () | |
RooAbsCachedPdf (const char *name, const char *title, Int_t ipOrder=0) | |
Constructor. | |
RooAbsCachedPdf (const RooAbsCachedPdf &other, const char *name=nullptr) | |
Copy constructor. | |
virtual double | analyticalIntegralWN (Int_t code, const RooArgSet *normSet, const char *rangeName=nullptr) const |
Implements internal (analytical) integration capabilities. | |
virtual bool | forceAnalyticalInt (const RooAbsArg &dep) const |
Force RooRealIntegral to offer all our actual observable for internal integration. | |
virtual Int_t | getAnalyticalIntegralWN (RooArgSet &allVars, RooArgSet &analVars, const RooArgSet *normSet, const char *rangeName=nullptr) const |
Advertises internal (analytical) integration capabilities. | |
RooDataHist * | getCacheHist (const RooArgSet &nset) const |
RooDataHist * | getCacheHist (const RooArgSet *nset=0) const |
Return pointer to RooDataHist cache histogram for given choice of observables. | |
RooAbsPdf * | getCachePdf (const RooArgSet &nset) const |
RooAbsPdf * | getCachePdf (const RooArgSet *nset=0) const |
Return pointer to RooHistPdf cache pdf for given choice of observables. | |
Int_t | getInterpolationOrder () const |
virtual double | getValV (const RooArgSet *set=nullptr) const |
Implementation of getVal() overriding default implementation of RooAbsPdf. | |
virtual bool | selfNormalized () const |
Shows if a PDF is self-normalized, which means that no attempt is made to add a normalization term. | |
void | setInterpolationOrder (int order) |
Change the interpolation order that is used in RooHistPdf cache representation smoothing the RooDataHist shapes. | |
Public Member Functions inherited from RooAbsPdf | |
RooAbsPdf () | |
Default constructor. | |
RooAbsPdf (const char *name, const char *title, Double_t minVal, Double_t maxVal) | |
Constructor with name, title, and plot range. | |
RooAbsPdf (const char *name, const char *title=0) | |
Constructor with name and title only. | |
virtual | ~RooAbsPdf () |
Destructor. | |
Double_t | analyticalIntegralWN (Int_t code, const RooArgSet *normSet, const char *rangeName=0) const |
Analytical integral with normalization (see RooAbsReal::analyticalIntegralWN() for further information) | |
virtual RooAbsGenContext * | autoGenContext (const RooArgSet &vars, const RooDataSet *prototype=0, const RooArgSet *auxProto=0, Bool_t verbose=kFALSE, Bool_t autoBinned=kTRUE, const char *binnedTag="") const |
virtual RooAbsGenContext * | binnedGenContext (const RooArgSet &vars, Bool_t verbose=kFALSE) const |
Return a binned generator context. | |
Bool_t | canBeExtended () const |
If true, PDF can provide extended likelihood term. | |
virtual RooFitResult * | chi2FitTo (RooDataHist &data, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Perform a \( \chi^2 \) fit to given histogram. | |
virtual RooFitResult * | chi2FitTo (RooDataHist &data, const RooLinkedList &cmdList) |
Perform a \( \chi^2 \) fit to given histogram. | |
virtual RooFitResult * | chi2FitTo (RooDataHist &data, const RooLinkedList &cmdList) |
Calls RooAbsPdf::createChi2(RooDataSet& data, const RooLinkedList& cmdList) and returns fit result. | |
virtual RooFitResult * | chi2FitTo (RooDataSet &xydata, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Perform a 2-D \( \chi^2 \) fit using a series of x and y values stored in the dataset xydata . | |
virtual RooFitResult * | chi2FitTo (RooDataSet &xydata, const RooLinkedList &cmdList) |
Perform a 2-D \( \chi^2 \) fit using a series of x and y values stored in the dataset xydata . | |
RooAbsReal * | createCdf (const RooArgSet &iset, const RooArgSet &nset=RooArgSet()) |
Create a cumulative distribution function of this p.d.f in terms of the observables listed in iset. | |
RooAbsReal * | createCdf (const RooArgSet &iset, const RooCmdArg &arg1, const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Create an object that represents the integral of the function over one or more observables listed in iset . | |
virtual RooAbsReal * | createChi2 (RooDataHist &data, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Create a \( \chi^2 \) variable from a histogram and this function. | |
virtual RooAbsReal * | createChi2 (RooDataHist &data, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Create a \( \chi^2 \) from a histogram and this function. | |
virtual RooAbsReal * | createChi2 (RooDataHist &data, const RooLinkedList &cmdList) |
Create a \( \chi^2 \) variable from a histogram and this function. | |
virtual RooAbsReal * | createChi2 (RooDataSet &data, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Create a \( \chi^2 \) from a series of x and y values stored in a dataset. | |
virtual RooAbsReal * | createChi2 (RooDataSet &data, const RooLinkedList &cmdList) |
See RooAbsReal::createChi2(RooDataSet&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&) | |
virtual RooAbsReal * | createChi2 (RooDataSet &data, const RooLinkedList &cmdList) |
Argument-list version of RooAbsPdf::createChi2() | |
virtual RooAbsReal * | createNLL (RooAbsData &data, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Construct representation of -log(L) of PDF with given dataset. | |
virtual RooAbsReal * | createNLL (RooAbsData &data, const RooLinkedList &cmdList) |
Construct representation of -log(L) of PDFwith given dataset. | |
virtual RooAbsPdf * | createProjection (const RooArgSet &iset) |
Return a p.d.f that represent a projection of this p.d.f integrated over given observables. | |
RooAbsReal * | createScanCdf (const RooArgSet &iset, const RooArgSet &nset, Int_t numScanBins, Int_t intOrder) |
double | expectedEvents (const RooArgSet &nset) const |
Return expected number of events to be used in calculation of extended likelihood. | |
virtual Double_t | expectedEvents (const RooArgSet *nset) const |
Return expected number of events to be used in calculation of extended likelihood. | |
double | extendedTerm (double sumEntries, double expected, double sumEntriesW2=0.0) const |
double | extendedTerm (double sumEntries, RooArgSet const *nset, double sumEntriesW2=0.0) const |
Return the extended likelihood term ( \( N_\mathrm{expect} - N_\mathrm{observed} \cdot \log(N_\mathrm{expect} \)) of this PDF for the given number of observed events. | |
double | extendedTerm (RooAbsData const &data, bool weightSquared) const |
Return the extended likelihood term ( \( N_\mathrm{expect} - N_\mathrm{observed} \cdot \log(N_\mathrm{expect} \)) of this PDF for the given number of observed events. | |
virtual ExtendMode | extendMode () const |
Returns ability of PDF to provide extended likelihood terms. | |
virtual RooFitResult * | fitTo (RooAbsData &data, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Fit PDF to given dataset. | |
virtual RooFitResult * | fitTo (RooAbsData &data, const RooLinkedList &cmdList) |
Fit PDF to given dataset. | |
RooDataSet * | generate (const RooArgSet &whatVars, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none()) |
Generate a new dataset containing the specified variables with events sampled from our distribution. | |
RooDataSet * | generate (const RooArgSet &whatVars, const RooDataSet &prototype, Int_t nEvents=0, Bool_t verbose=kFALSE, Bool_t randProtoOrder=kFALSE, Bool_t resampleProto=kFALSE) const |
Generate a new dataset using a prototype dataset as a model, with values of the variables in whatVars sampled from our distribution. | |
RooDataSet * | generate (const RooArgSet &whatVars, Double_t nEvents=0, Bool_t verbose=kFALSE, Bool_t autoBinned=kTRUE, const char *binnedTag="", Bool_t expectedData=kFALSE, Bool_t extended=kFALSE) const |
Generate a new dataset containing the specified variables with events sampled from our distribution. | |
RooDataSet * | generate (const RooArgSet &whatVars, Int_t nEvents, const RooCmdArg &arg1, const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none()) |
See RooAbsPdf::generate(const RooArgSet&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&,const RooCmdArg&) | |
RooDataSet * | generate (GenSpec &) const |
Generate according to GenSpec obtained from prepareMultiGen(). | |
virtual RooDataHist * | generateBinned (const RooArgSet &whatVars, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none()) const |
Generate a new dataset containing the specified variables with events sampled from our distribution. | |
virtual RooDataHist * | generateBinned (const RooArgSet &whatVars, Double_t nEvents, Bool_t expectedData=kFALSE, Bool_t extended=kFALSE) const |
Generate a new dataset containing the specified variables with events sampled from our distribution. | |
virtual RooDataHist * | generateBinned (const RooArgSet &whatVars, Double_t nEvents, const RooCmdArg &arg1, const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none()) const |
As RooAbsPdf::generateBinned(const RooArgSet&, const RooCmdArg&,const RooCmdArg&, const RooCmdArg&,const RooCmdArg&, const RooCmdArg&,const RooCmdArg&) | |
virtual void | generateEvent (Int_t code) |
Interface for generation of an event using the algorithm corresponding to the specified code. | |
virtual RooDataSet * | generateSimGlobal (const RooArgSet &whatVars, Int_t nEvents) |
Special generator interface for generation of 'global observables' – for RooStats tools. | |
virtual RooArgSet * | getAllConstraints (const RooArgSet &observables, RooArgSet &constrainedParams, Bool_t stripDisconnected=kTRUE) const |
This helper function finds and collects all constraints terms of all component p.d.f.s and returns a RooArgSet with all those terms. | |
virtual RooArgSet * | getConstraints (const RooArgSet &, RooArgSet &, Bool_t) const |
virtual Int_t | getGenerator (const RooArgSet &directVars, RooArgSet &generateVars, Bool_t staticInitOK=kTRUE) const |
Load generatedVars with the subset of directVars that we can generate events for, and return a code that specifies the generator algorithm we will use. | |
const RooNumGenConfig * | getGeneratorConfig () const |
Return the numeric MC generator configuration used for this object. | |
RooSpan< const double > | getLogProbabilities (RooBatchCompute::RunContext &evalData, const RooArgSet *normSet=nullptr) const |
Compute the log-likelihoods for all events in the requested batch. | |
void | getLogProbabilities (RooSpan< const double > pdfValues, double *output) const |
virtual Double_t | getLogVal (const RooArgSet *set=0) const |
Return the log of the current value with given normalization An error message is printed if the argument of the log is negative. | |
RooSpan< const double > | getLogValBatch (std::size_t begin, std::size_t batchSize, const RooArgSet *normSet=nullptr) const |
Double_t | getNorm (const RooArgSet &nset) const |
Get normalisation term needed to normalise the raw values returned by getVal(). | |
virtual Double_t | getNorm (const RooArgSet *set=0) const |
Get normalisation term needed to normalise the raw values returned by getVal(). | |
const RooAbsReal * | getNormIntegral (const RooArgSet &nset) const |
virtual const RooAbsReal * | getNormObj (const RooArgSet *set, const RooArgSet *iset, const TNamed *rangeName=0) const |
Return pointer to RooAbsReal object that implements calculation of integral over observables iset in range rangeName, optionally taking the integrand normalized over observables nset. | |
std::vector< double > | getValues (RooAbsData const &data, RooFit::BatchModeOption batchMode=RooFit::BatchModeOption::Cpu) const |
RooSpan< const double > | getValues (RooBatchCompute::RunContext &evalData, const RooArgSet *normSet) const |
Compute batch of values for given input data, and normalise by integrating over the observables in normSet . | |
virtual RooSpan< const double > | getValues (RooBatchCompute::RunContext &evalData, const RooArgSet *normSet=nullptr) const |
virtual void | initGenerator (Int_t code) |
Interface for one-time initialization to setup the generator for the specified code. | |
virtual Bool_t | isDirectGenSafe (const RooAbsArg &arg) const |
Check if given observable can be safely generated using the pdfs internal generator mechanism (if that existsP). | |
std::unique_ptr< RooFitResult > | minimizeNLL (RooAbsReal &nll, RooAbsData const &data, MinimizerConfig const &cfg) |
Minimizes a given NLL variable by finding the optimal parameters with the RooMinimzer. | |
Bool_t | mustBeExtended () const |
If true PDF must provide extended likelihood term. | |
const char * | normRange () const |
virtual RooPlot * | paramOn (RooPlot *frame, const RooAbsData *data, const char *label="", Int_t sigDigits=2, Option_t *options="NELU", Double_t xmin=0.65, Double_t xmax=0.9, Double_t ymax=0.9) |
virtual RooPlot * | paramOn (RooPlot *frame, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Add a box with parameter values (and errors) to the specified frame. | |
virtual RooPlot * | plotOn (RooPlot *frame, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none(), const RooCmdArg &arg9=RooCmdArg::none(), const RooCmdArg &arg10=RooCmdArg::none()) const |
Helper calling plotOn(RooPlot*, RooLinkedList&) const. | |
virtual RooPlot * | plotOn (RooPlot *frame, RooLinkedList &cmdList) const |
Plot (project) PDF on specified frame. | |
GenSpec * | prepareMultiGen (const RooArgSet &whatVars, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none()) |
Prepare GenSpec configuration object for efficient generation of multiple datasets from identical specification. | |
virtual void | printMultiline (std::ostream &os, Int_t contents, Bool_t verbose=kFALSE, TString indent="") const |
Print multi line detailed information of this RooAbsPdf. | |
virtual void | printValue (std::ostream &os) const |
Print value of p.d.f, also print normalization integral that was last used, if any. | |
virtual void | resetErrorCounters (Int_t resetValue=10) |
Reset error counter to given value, limiting the number of future error messages for this pdf to 'resetValue'. | |
void | setGeneratorConfig () |
Remove the specialized numeric MC generator configuration associated with this object. | |
void | setGeneratorConfig (const RooNumGenConfig &config) |
Set the given configuration as default numeric MC generator configuration for this object. | |
void | setNormRange (const char *rangeName) |
void | setNormRangeOverride (const char *rangeName) |
void | setTraceCounter (Int_t value, Bool_t allNodes=kFALSE) |
Reset trace counter to given value, limiting the number of future trace messages for this pdf to 'value'. | |
RooNumGenConfig * | specialGeneratorConfig () const |
Returns the specialized integrator configuration for this RooAbsReal. | |
RooNumGenConfig * | specialGeneratorConfig (Bool_t createOnTheFly) |
Returns the specialized integrator configuration for this RooAbsReal. | |
Public Member Functions inherited from RooAbsReal | |
RooAbsReal () | |
coverity[UNINIT_CTOR] Default constructor | |
RooAbsReal (const char *name, const char *title, const char *unit="") | |
Constructor with unit label. | |
RooAbsReal (const char *name, const char *title, Double_t minVal, Double_t maxVal, const char *unit="") | |
Constructor with plot range and unit label. | |
RooAbsReal (const RooAbsReal &other, const char *name=0) | |
Copy constructor. | |
virtual | ~RooAbsReal () |
Destructor. | |
virtual Double_t | analyticalIntegral (Int_t code, const char *rangeName=0) const |
Implements the actual analytical integral(s) advertised by getAnalyticalIntegral. | |
TF1 * | asTF (const RooArgList &obs, const RooArgList &pars=RooArgList(), const RooArgSet &nset=RooArgSet()) const |
Return a ROOT TF1,2,3 object bound to this RooAbsReal with given definition of observables and parameters. | |
virtual std::list< Double_t > * | binBoundaries (RooAbsRealLValue &obs, Double_t xlo, Double_t xhi) const |
Retrieve bin boundaries if this distribution is binned in obs . | |
RooAbsFunc * | bindVars (const RooArgSet &vars, const RooArgSet *nset=0, Bool_t clipInvalid=kFALSE) const |
Create an interface adaptor f(vars) that binds us to the specified variables (in arbitrary order). | |
RooAbsArg * | createFundamental (const char *newname=0) const |
Create a RooRealVar fundamental object with our properties. | |
TH1 * | createHistogram (const char *name, const RooAbsRealLValue &xvar, const RooCmdArg &arg1=RooCmdArg::none(), const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) const |
Create and fill a ROOT histogram TH1, TH2 or TH3 with the values of this function. | |
TH1 * | createHistogram (const char *name, const RooAbsRealLValue &xvar, RooLinkedList &argList) const |
Internal method implementing createHistogram. | |
TH1 * | createHistogram (const char *varNameList, Int_t xbins=0, Int_t ybins=0, Int_t zbins=0) const |
Create and fill a ROOT histogram TH1, TH2 or TH3 with the values of this function for the variables with given names. | |
RooAbsReal * | createIntegral (const RooArgSet &iset, const char *rangeName) const |
Create integral over observables in iset in range named rangeName. | |
RooAbsReal * | createIntegral (const RooArgSet &iset, const RooArgSet &nset, const char *rangeName=0) const |
Create integral over observables in iset in range named rangeName with integrand normalized over observables in nset. | |
RooAbsReal * | createIntegral (const RooArgSet &iset, const RooArgSet &nset, const RooNumIntConfig &cfg, const char *rangeName=0) const |
Create integral over observables in iset in range named rangeName with integrand normalized over observables in nset while using specified configuration for any numeric integration. | |
virtual RooAbsReal * | createIntegral (const RooArgSet &iset, const RooArgSet *nset=0, const RooNumIntConfig *cfg=0, const char *rangeName=0) const |
Create an object that represents the integral of the function over one or more observables listed in iset. | |
RooAbsReal * | createIntegral (const RooArgSet &iset, const RooCmdArg &arg1, const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) const |
Create an object that represents the integral of the function over one or more observables listed in iset . | |
RooAbsReal * | createIntegral (const RooArgSet &iset, const RooNumIntConfig &cfg, const char *rangeName=0) const |
Create integral over observables in iset in range named rangeName using specified configuration for any numeric integration. | |
RooAbsReal * | createIntRI (const RooArgSet &iset, const RooArgSet &nset=RooArgSet()) |
Utility function for createRunningIntegral. | |
const RooAbsReal * | createPlotProjection (const RooArgSet &dependentVars, const RooArgSet *projectedVars, RooArgSet *&cloneSet, const char *rangeName=0, const RooArgSet *condObs=0) const |
Utility function for plotOn() that creates a projection of a function or p.d.f to be plotted on a RooPlot. | |
const RooAbsReal * | createPlotProjection (const RooArgSet &depVars, const RooArgSet &projVars, RooArgSet *&cloneSet) const |
Utility function for plotOn() that creates a projection of a function or p.d.f to be plotted on a RooPlot. | |
virtual RooAbsReal * | createProfile (const RooArgSet ¶msOfInterest) |
Create a RooProfileLL object that eliminates all nuisance parameters in the present function. | |
RooAbsReal * | createRunningIntegral (const RooArgSet &iset, const RooArgSet &nset=RooArgSet()) |
Calls createRunningIntegral(const RooArgSet&, const RooCmdArg&, const RooCmdArg&, const RooCmdArg&, const RooCmdArg&, const RooCmdArg&, const RooCmdArg&, const RooCmdArg&, const RooCmdArg&) | |
RooAbsReal * | createRunningIntegral (const RooArgSet &iset, const RooCmdArg &arg1, const RooCmdArg &arg2=RooCmdArg::none(), const RooCmdArg &arg3=RooCmdArg::none(), const RooCmdArg &arg4=RooCmdArg::none(), const RooCmdArg &arg5=RooCmdArg::none(), const RooCmdArg &arg6=RooCmdArg::none(), const RooCmdArg &arg7=RooCmdArg::none(), const RooCmdArg &arg8=RooCmdArg::none()) |
Create an object that represents the running integral of the function over one or more observables listed in iset, i.e. | |
RooAbsReal * | createScanRI (const RooArgSet &iset, const RooArgSet &nset, Int_t numScanBins, Int_t intOrder) |
Utility function for createRunningIntegral that construct an object implementing the numeric scanning technique for calculating the running integral. | |
virtual Double_t | defaultErrorLevel () const |
RooDerivative * | derivative (RooRealVar &obs, const RooArgSet &normSet, Int_t order, Double_t eps=0.001) |
Return function representing first, second or third order derivative of this function. | |
RooDerivative * | derivative (RooRealVar &obs, Int_t order=1, Double_t eps=0.001) |
Return function representing first, second or third order derivative of this function. | |
virtual void | enableOffsetting (Bool_t) |
RooDataHist * | fillDataHist (RooDataHist *hist, const RooArgSet *nset, Double_t scaleFactor, Bool_t correctForBinVolume=kFALSE, Bool_t showProgress=kFALSE) const |
Fill a RooDataHist with values sampled from this function at the bin centers. | |
TH1 * | fillHistogram (TH1 *hist, const RooArgList &plotVars, Double_t scaleFactor=1, const RooArgSet *projectedVars=0, Bool_t scaling=kTRUE, const RooArgSet *condObs=0, Bool_t setError=kTRUE) const |
Fill the ROOT histogram 'hist' with values sampled from this function at the bin centers. | |
Double_t | findRoot (RooRealVar &x, Double_t xmin, Double_t xmax, Double_t yval) |
Return value of x (in range xmin,xmax) at which function equals yval. | |
virtual void | fixAddCoefNormalization (const RooArgSet &addNormSet=RooArgSet(), Bool_t force=kTRUE) |
Fix the interpretation of the coefficient of any RooAddPdf component in the expression tree headed by this object to the given set of observables. | |
virtual void | fixAddCoefRange (const char *rangeName=0, Bool_t force=kTRUE) |
Fix the interpretation of the coefficient of any RooAddPdf component in the expression tree headed by this object to the given set of observables. | |
virtual void | forceNumInt (Bool_t flag=kTRUE) |
RooFunctor * | functor (const RooArgList &obs, const RooArgList &pars=RooArgList(), const RooArgSet &nset=RooArgSet()) const |
Return a RooFunctor object bound to this RooAbsReal with given definition of observables and parameters. | |
virtual Int_t | getAnalyticalIntegral (RooArgSet &allVars, RooArgSet &analVars, const char *rangeName=0) const |
Interface function getAnalyticalIntergral advertises the analytical integrals that are supported. | |
Bool_t | getForceNumInt () const |
RooNumIntConfig * | getIntegratorConfig () |
Return the numeric integration configuration used for this object. | |
const RooNumIntConfig * | getIntegratorConfig () const |
Return the numeric integration configuration used for this object. | |
const char * | getPlotLabel () const |
Get the label associated with the variable. | |
Double_t | getPropagatedError (const RooFitResult &fr, const RooArgSet &nset=RooArgSet()) const |
Calculate error on self by linearly propagating errors on parameters using the covariance matrix from a fit result. | |
TString | getTitle (Bool_t appendUnit=kFALSE) const |
Return this variable's title string. | |
const Text_t * | getUnit () const |
Double_t | getVal (const RooArgSet &normalisationSet) const |
Like getVal(const RooArgSet*), but always requires an argument for normalisation. | |
Double_t | getVal (const RooArgSet *normalisationSet=nullptr) const |
Evaluate object. | |
virtual RooSpan< const double > | getValBatch (std::size_t, std::size_t, const RooArgSet *=nullptr)=delete |
std::vector< double > | getValues (RooAbsData const &data, RooFit::BatchModeOption batchMode=RooFit::BatchModeOption::Cpu) const |
RooMultiGenFunction * | iGenFunction (const RooArgSet &observables, const RooArgSet &nset=RooArgSet()) |
RooGenFunction * | iGenFunction (RooRealVar &x, const RooArgSet &nset=RooArgSet()) |
virtual Bool_t | isBinnedDistribution (const RooArgSet &) const |
Tests if the distribution is binned. Unless overridden by derived classes, this always returns false. | |
virtual Bool_t | isIdentical (const RooAbsArg &other, Bool_t assumeSameType=kFALSE) const |
virtual Bool_t | isOffsetting () const |
void | logEvalError (const char *message, const char *serverValueString=0) const |
Log evaluation error message. | |
RooAbsMoment * | mean (RooRealVar &obs) |
RooAbsMoment * | mean (RooRealVar &obs, const RooArgSet &nset) |
virtual Int_t | minTrialSamples (const RooArgSet &) const |
RooAbsMoment * | moment (RooRealVar &obs, const RooArgSet &normObs, Int_t order, Bool_t central, Bool_t takeRoot, Bool_t intNormObs) |
Return function representing moment of p.d.f (normalized w.r.t given observables) of given order. | |
RooAbsMoment * | moment (RooRealVar &obs, Int_t order, Bool_t central, Bool_t takeRoot) |
Return function representing moment of function of given order. | |
virtual Double_t | offset () const |
RooAbsReal & | operator= (const RooAbsReal &other) |
Assign values, name and configs from another RooAbsReal. | |
virtual Bool_t | operator== (const RooAbsArg &other) const |
Equality operator when comparing to another RooAbsArg. | |
Bool_t | operator== (Double_t value) const |
Equality operator comparing to a Double_t. | |
virtual std::list< Double_t > * | plotSamplingHint (RooAbsRealLValue &obs, Double_t xlo, Double_t xhi) const |
Interface for returning an optional hint for initial sampling points when constructing a curve projected on observable obs . | |
virtual RooPlot * | plotSliceOn (RooPlot *frame, const RooArgSet &sliceSet, Option_t *drawOptions="L", Double_t scaleFactor=1.0, ScaleType stype=Relative, const RooAbsData *projData=0) const |
virtual void | preferredObservableScanOrder (const RooArgSet &obs, RooArgSet &orderedObs) const |
Interface method for function objects to indicate their preferred order of observables for scanning their values into a (multi-dimensional) histogram or RooDataSet. | |
virtual Bool_t | readFromStream (std::istream &is, Bool_t compact, Bool_t verbose=kFALSE) |
Read object contents from stream (dummy for now) | |
void | setCachedValue (double value, bool notifyClients=true) final |
Overwrite the value stored in this object's cache. | |
virtual Bool_t | setData (RooAbsData &, Bool_t=kTRUE) |
void | setIntegratorConfig () |
Remove the specialized numeric integration configuration associated with this object. | |
void | setIntegratorConfig (const RooNumIntConfig &config) |
Set the given integrator configuration as default numeric integration configuration for this object. | |
void | setParameterizeIntegral (const RooArgSet ¶mVars) |
void | setPlotLabel (const char *label) |
Set the label associated with this variable. | |
void | setUnit (const char *unit) |
RooAbsMoment * | sigma (RooRealVar &obs) |
RooAbsMoment * | sigma (RooRealVar &obs, const RooArgSet &nset) |
RooNumIntConfig * | specialIntegratorConfig () const |
Returns the specialized integrator configuration for this RooAbsReal. | |
RooNumIntConfig * | specialIntegratorConfig (Bool_t createOnTheFly) |
Returns the specialized integrator configuration for this RooAbsReal. | |
virtual void | writeToStream (std::ostream &os, Bool_t compact) const |
Write object contents to stream (dummy for now) | |
Public Member Functions inherited from RooAbsArg | |
RooAbsArg () | |
Default constructor. | |
RooAbsArg (const char *name, const char *title) | |
Create an object with the specified name and descriptive title. | |
RooAbsArg (const RooAbsArg &other, const char *name=0) | |
Copy constructor transfers all boolean and string properties of the original object. | |
virtual | ~RooAbsArg () |
Destructor. | |
bool | addOwnedComponents (const RooAbsCollection &comps) |
Take ownership of the contents of 'comps'. | |
bool | addOwnedComponents (RooAbsCollection &&comps) |
Take ownership of the contents of 'comps'. | |
bool | addOwnedComponents (RooArgList &&comps) |
Take ownership of the contents of 'comps'. | |
template<typename... Args_t> | |
bool | addOwnedComponents (std::unique_ptr< Args_t >... comps) |
virtual void | applyWeightSquared (bool flag) |
Disables or enables the usage of squared weights. | |
void | attachArgs (const RooAbsCollection &set) |
Bind this node to objects in set . | |
void | attachDataSet (const RooAbsData &set) |
Replace server nodes with names matching the dataset variable names with those data set variables, making this PDF directly dependent on the dataset. | |
void | attachDataStore (const RooAbsDataStore &set) |
Replace server nodes with names matching the dataset variable names with those data set variables, making this PDF directly dependent on the dataset. | |
const std::set< std::string > & | attributes () const |
virtual bool | canComputeBatchWithCuda () const |
virtual Bool_t | checkObservables (const RooArgSet *nset) const |
Overloadable function in which derived classes can implement consistency checks of the variables. | |
virtual TObject * | Clone (const char *newname=0) const |
Make a clone of an object using the Streamer facility. | |
virtual RooAbsArg * | cloneTree (const char *newname=0) const |
Clone tree expression of objects. | |
Int_t | Compare (const TObject *other) const |
Utility function used by TCollection::Sort to compare contained TObjects We implement comparison by name, resulting in alphabetical sorting by object name. | |
std::size_t | dataToken () const |
Returns the token for retrieving results in the BatchMode. For internal use only. | |
virtual Int_t | defaultPrintContents (Option_t *opt) const |
Define default contents to print. | |
Bool_t | dependsOn (const RooAbsArg &server, const RooAbsArg *ignoreArg=0, Bool_t valueOnly=kFALSE) const |
Test whether we depend on (ie, are served by) the specified object. | |
Bool_t | dependsOn (const RooAbsCollection &serverList, const RooAbsArg *ignoreArg=0, Bool_t valueOnly=kFALSE) const |
Test whether we depend on (ie, are served by) any object in the specified collection. | |
Bool_t | dependsOnValue (const RooAbsArg &server, const RooAbsArg *ignoreArg=0) const |
Check whether this object depends on values served from the object passed as server . | |
Bool_t | dependsOnValue (const RooAbsCollection &serverList, const RooAbsArg *ignoreArg=0) const |
Check whether this object depends on values from an element in the serverList . | |
virtual std::unique_ptr< RooArgSet > | fillNormSetForServer (RooArgSet const &normSet, RooAbsArg const &server) const |
Fills a RooArgSet to be used as the normalization set for a server, given a normalization set for this RooAbsArg. | |
Bool_t | getAttribute (const Text_t *name) const |
Check if a named attribute is set. By default, all attributes are unset. | |
RooLinkedList | getCloningAncestors () const |
Return ancestors in cloning chain of this RooAbsArg. | |
RooArgSet * | getComponents () const |
Create a RooArgSet with all components (branch nodes) of the expression tree headed by this object. | |
bool | getObservables (const RooAbsCollection *depList, RooArgSet &outputSet, bool valueOnly=true) const |
Create a list of leaf nodes in the arg tree starting with ourself as top node that match any of the names the args in the supplied argset. | |
RooArgSet * | getObservables (const RooAbsData &data) const |
Return the observables of this pdf given the observables defined by data . | |
RooArgSet * | getObservables (const RooAbsData *data) const |
Create a list of leaf nodes in the arg tree starting with ourself as top node that match any of the names of the variable list of the supplied data set (the dependents). | |
RooArgSet * | getObservables (const RooArgSet &set, Bool_t valueOnly=kTRUE) const |
Given a set of possible observables, return the observables that this PDF depends on. | |
RooArgSet * | getObservables (const RooArgSet *depList, bool valueOnly=true) const |
Create a list of leaf nodes in the arg tree starting with ourself as top node that match any of the names the args in the supplied argset. | |
RooArgSet * | getParameters (const RooAbsData &data, bool stripDisconnected=true) const |
Return the parameters of this p.d.f when used in conjuction with dataset 'data'. | |
RooArgSet * | getParameters (const RooAbsData *data, bool stripDisconnected=true) const |
Create a list of leaf nodes in the arg tree starting with ourself as top node that don't match any of the names of the variable list of the supplied data set (the dependents). | |
RooArgSet * | getParameters (const RooArgSet &observables, bool stripDisconnected=true) const |
Return the parameters of the p.d.f given the provided set of observables. | |
RooArgSet * | getParameters (const RooArgSet *observables, bool stripDisconnected=true) const |
Create a list of leaf nodes in the arg tree starting with ourself as top node that don't match any of the names the args in the supplied argset. | |
virtual bool | getParameters (const RooArgSet *observables, RooArgSet &outputSet, bool stripDisconnected=true) const |
Fills a list with leaf nodes in the arg tree starting with ourself as top node that don't match any of the names the args in the supplied argset. | |
RooAbsProxy * | getProxy (Int_t index) const |
Return the nth proxy from the proxy list. | |
const Text_t * | getStringAttribute (const Text_t *key) const |
Get string attribute mapped under key 'key'. | |
Bool_t | getTransientAttribute (const Text_t *name) const |
Check if a named attribute is set. | |
RooArgSet * | getVariables (Bool_t stripDisconnected=kTRUE) const |
Return RooArgSet with all variables (tree leaf nodes of expresssion tree) | |
void | graphVizTree (const char *fileName, const char *delimiter="\n", bool useTitle=false, bool useLatex=false) |
Create a GraphViz .dot file visualizing the expression tree headed by this RooAbsArg object. | |
void | graphVizTree (std::ostream &os, const char *delimiter="\n", bool useTitle=false, bool useLatex=false) |
Write the GraphViz representation of the expression tree headed by this RooAbsArg object to the given ostream. | |
Bool_t | hasClients () const |
virtual Bool_t | hasRange (const char *) const |
virtual Bool_t | importWorkspaceHook (RooWorkspace &ws) |
virtual Bool_t | inRange (const char *) const |
virtual bool | isCategory () const |
Bool_t | isCloneOf (const RooAbsArg &other) const |
Check if this object was created as a clone of 'other'. | |
Bool_t | isConstant () const |
Check if the "Constant" attribute is set. | |
virtual Bool_t | isDerived () const |
Does value or shape of this arg depend on any other arg? | |
virtual bool | isReducerNode () const |
virtual Bool_t | IsSortable () const |
Bool_t | localNoDirtyInhibit () const |
const TNamed * | namePtr () const |
De-duplicated pointer to this object's name. | |
Int_t | numProxies () const |
Return the number of registered proxies. | |
Bool_t | observableOverlaps (const RooAbsData *dset, const RooAbsArg &testArg) const |
Test if any of the dependents of the arg tree (as determined by getObservables) overlaps with those of the testArg. | |
Bool_t | observableOverlaps (const RooArgSet *depList, const RooAbsArg &testArg) const |
Test if any of the dependents of the arg tree (as determined by getObservables) overlaps with those of the testArg. | |
RooAbsArg & | operator= (const RooAbsArg &other) |
Assign all boolean and string properties of the original object. | |
Bool_t | overlaps (const RooAbsArg &testArg, Bool_t valueOnly=kFALSE) const |
Test if any of the nodes of tree are shared with that of the given tree. | |
const RooArgSet * | ownedComponents () const |
virtual void | Print (Option_t *options=0) const |
Print the object to the defaultPrintStream(). | |
virtual void | printAddress (std::ostream &os) const |
Print class name of object. | |
virtual void | printArgs (std::ostream &os) const |
Print object arguments, ie its proxies. | |
virtual void | printClassName (std::ostream &os) const |
Print object class name. | |
void | printCompactTree (const char *indent="", const char *fileName=0, const char *namePat=0, RooAbsArg *client=0) |
Print tree structure of expression tree on stdout, or to file if filename is specified. | |
void | printCompactTree (std::ostream &os, const char *indent="", const char *namePat=0, RooAbsArg *client=0) |
Print tree structure of expression tree on given ostream. | |
virtual void | printCompactTreeHook (std::ostream &os, const char *ind="") |
Hook function interface for object to insert additional information when printed in the context of a tree structure. | |
void | printComponentTree (const char *indent="", const char *namePat=0, Int_t nLevel=999) |
Print tree structure of expression tree on given ostream, only branch nodes are printed. | |
void | printDirty (Bool_t depth=kTRUE) const |
Print information about current value dirty state information. | |
virtual void | printName (std::ostream &os) const |
Print object name. | |
virtual void | printTitle (std::ostream &os) const |
Print object title. | |
virtual void | printTree (std::ostream &os, TString indent="") const |
Print object tree structure. | |
Bool_t | recursiveCheckObservables (const RooArgSet *nset) const |
Recursively call checkObservables on all nodes in the expression tree. | |
void | setAttribute (const Text_t *name, Bool_t value=kTRUE) |
Set (default) or clear a named boolean attribute of this object. | |
void | setDataToken (std::size_t index) |
Sets the token for retrieving results in the BatchMode. For internal use only. | |
void | setLocalNoDirtyInhibit (Bool_t flag) const |
void | SetName (const char *name) |
Set the name of the TNamed. | |
void | SetNameTitle (const char *name, const char *title) |
Set all the TNamed parameters (name and title). | |
void | setProhibitServerRedirect (Bool_t flag) |
void | setStringAttribute (const Text_t *key, const Text_t *value) |
Associate string 'value' to this object under key 'key'. | |
void | setTransientAttribute (const Text_t *name, Bool_t value=kTRUE) |
Set (default) or clear a named boolean attribute of this object. | |
void | setWorkspace (RooWorkspace &ws) |
const std::map< std::string, std::string > & | stringAttributes () const |
const std::set< std::string > & | transientAttributes () const |
TIterator * | clientIterator () const |
Retrieve a client iterator. | |
TIterator * | valueClientIterator () const |
TIterator * | shapeClientIterator () const |
TIterator * | serverIterator () const |
RooFIter | valueClientMIterator () const |
RooFIter | shapeClientMIterator () const |
RooFIter | serverMIterator () const |
RooArgSet * | getDependents (const RooArgSet &set) const |
RooArgSet * | getDependents (const RooAbsData *set) const |
RooArgSet * | getDependents (const RooArgSet *depList) const |
Bool_t | dependentOverlaps (const RooAbsData *dset, const RooAbsArg &testArg) const |
Bool_t | dependentOverlaps (const RooArgSet *depList, const RooAbsArg &testArg) const |
Bool_t | checkDependents (const RooArgSet *nset) const |
Bool_t | recursiveCheckDependents (const RooArgSet *nset) const |
const RefCountList_t & | clients () const |
List of all clients of this object. | |
const RefCountList_t & | valueClients () const |
List of all value clients of this object. Value clients receive value updates. | |
const RefCountList_t & | shapeClients () const |
List of all shape clients of this object. | |
const RefCountList_t & | servers () const |
List of all servers of this object. | |
RooAbsArg * | findServer (const char *name) const |
Return server of this with name name . Returns nullptr if not found. | |
RooAbsArg * | findServer (const RooAbsArg &arg) const |
Return server of this that has the same name as arg . Returns nullptr if not found. | |
RooAbsArg * | findServer (Int_t index) const |
Return i-th server from server list. | |
Bool_t | isValueServer (const RooAbsArg &arg) const |
Check if this is serving values to arg . | |
Bool_t | isValueServer (const char *name) const |
Check if this is serving values to an object with name name . | |
Bool_t | isShapeServer (const RooAbsArg &arg) const |
Check if this is serving shape to arg . | |
Bool_t | isShapeServer (const char *name) const |
Check if this is serving shape to an object with name name . | |
void | leafNodeServerList (RooAbsCollection *list, const RooAbsArg *arg=0, Bool_t recurseNonDerived=kFALSE) const |
Fill supplied list with all leaf nodes of the arg tree, starting with ourself as top node. | |
void | branchNodeServerList (RooAbsCollection *list, const RooAbsArg *arg=0, Bool_t recurseNonDerived=kFALSE) const |
Fill supplied list with all branch nodes of the arg tree starting with ourself as top node. | |
void | treeNodeServerList (RooAbsCollection *list, const RooAbsArg *arg=0, Bool_t doBranch=kTRUE, Bool_t doLeaf=kTRUE, Bool_t valueOnly=kFALSE, Bool_t recurseNonDerived=kFALSE) const |
Fill supplied list with nodes of the arg tree, following all server links, starting with ourself as top node. | |
virtual Bool_t | isFundamental () const |
Is this object a fundamental type that can be added to a dataset? Fundamental-type subclasses override this method to return kTRUE. | |
virtual Bool_t | isLValue () const |
Is this argument an l-value, i.e., can it appear on the left-hand side of an assignment expression? LValues are also special since they can potentially be analytically integrated and generated. | |
Bool_t | redirectServers (const RooAbsCollection &newServerList, Bool_t mustReplaceAll=kFALSE, Bool_t nameChange=kFALSE, Bool_t isRecursionStep=kFALSE) |
Replace all direct servers of this object with the new servers in newServerList . | |
Bool_t | recursiveRedirectServers (const RooAbsCollection &newServerList, Bool_t mustReplaceAll=kFALSE, Bool_t nameChange=kFALSE, Bool_t recurseInNewSet=kTRUE) |
Recursively replace all servers with the new servers in newSet . | |
virtual void | serverNameChangeHook (const RooAbsArg *, const RooAbsArg *) |
void | addServer (RooAbsArg &server, Bool_t valueProp=kTRUE, Bool_t shapeProp=kFALSE, std::size_t refCount=1) |
Register another RooAbsArg as a server to us, ie, declare that we depend on it. | |
void | addServerList (RooAbsCollection &serverList, Bool_t valueProp=kTRUE, Bool_t shapeProp=kFALSE) |
Register a list of RooAbsArg as servers to us by calling addServer() for each arg in the list. | |
void | replaceServer (RooAbsArg &oldServer, RooAbsArg &newServer, Bool_t valueProp, Bool_t shapeProp) |
Replace 'oldServer' with 'newServer'. | |
void | changeServer (RooAbsArg &server, Bool_t valueProp, Bool_t shapeProp) |
Change dirty flag propagation mask for specified server. | |
void | removeServer (RooAbsArg &server, Bool_t force=kFALSE) |
Unregister another RooAbsArg as a server to us, ie, declare that we no longer depend on its value and shape. | |
RooAbsArg * | findNewServer (const RooAbsCollection &newSet, Bool_t nameChange) const |
Find the new server in the specified set that matches the old server. | |
virtual void | optimizeCacheMode (const RooArgSet &observables) |
Activate cache mode optimization with given definition of observables. | |
virtual void | optimizeCacheMode (const RooArgSet &observables, RooArgSet &optNodes, RooLinkedList &processedNodes) |
Activate cache mode optimization with given definition of observables. | |
Bool_t | findConstantNodes (const RooArgSet &observables, RooArgSet &cacheList) |
Find branch nodes with all-constant parameters, and add them to the list of nodes that can be cached with a dataset in a test statistic calculation. | |
Bool_t | findConstantNodes (const RooArgSet &observables, RooArgSet &cacheList, RooLinkedList &processedNodes) |
Find branch nodes with all-constant parameters, and add them to the list of nodes that can be cached with a dataset in a test statistic calculation. | |
virtual void | constOptimizeTestStatistic (ConstOpCode opcode, Bool_t doAlsoTrackingOpt=kTRUE) |
Interface function signaling a request to perform constant term optimization. | |
virtual CacheMode | canNodeBeCached () const |
virtual void | setCacheAndTrackHints (RooArgSet &) |
Bool_t | isShapeDirty () const |
Bool_t | isValueDirty () const |
Bool_t | isValueDirtyAndClear () const |
Bool_t | isValueOrShapeDirtyAndClear () const |
void | registerCache (RooAbsCache &cache) |
Register RooAbsCache with this object. | |
void | unRegisterCache (RooAbsCache &cache) |
Unregister a RooAbsCache. Called from the RooAbsCache destructor. | |
Int_t | numCaches () const |
Return number of registered caches. | |
RooAbsCache * | getCache (Int_t index) const |
Return registered cache object by index. | |
OperMode | operMode () const |
Query the operation mode of this node. | |
void | setOperMode (OperMode mode, Bool_t recurseADirty=kTRUE) |
Set the operation mode of this node. | |
void | setValueDirty () |
Mark the element dirty. This forces a re-evaluation when a value is requested. | |
void | setShapeDirty () |
Notify that a shape-like property (e.g. binning) has changed. | |
const char * | aggregateCacheUniqueSuffix () const |
virtual const char * | cacheUniqueSuffix () const |
void | wireAllCaches () |
RooExpensiveObjectCache & | expensiveObjectCache () const |
virtual void | setExpensiveObjectCache (RooExpensiveObjectCache &cache) |
Public Member Functions inherited from TNamed | |
TNamed () | |
TNamed (const char *name, const char *title) | |
TNamed (const TNamed &named) | |
TNamed copy ctor. | |
TNamed (const TString &name, const TString &title) | |
virtual | ~TNamed () |
TNamed destructor. | |
virtual void | Clear (Option_t *option="") |
Set name and title to empty strings (""). | |
virtual void | Copy (TObject &named) const |
Copy this to obj. | |
virtual void | FillBuffer (char *&buffer) |
Encode TNamed into output buffer. | |
virtual const char * | GetName () const |
Returns name of object. | |
virtual const char * | GetTitle () const |
Returns title of object. | |
virtual ULong_t | Hash () const |
Return hash value for this object. | |
virtual void | ls (Option_t *option="") const |
List TNamed name and title. | |
TNamed & | operator= (const TNamed &rhs) |
TNamed assignment operator. | |
virtual void | SetTitle (const char *title="") |
Set the title of the TNamed. | |
virtual Int_t | Sizeof () const |
Return size of the TNamed part of the TObject. | |
Public Member Functions inherited from TObject | |
TObject () | |
TObject constructor. | |
TObject (const TObject &object) | |
TObject copy ctor. | |
virtual | ~TObject () |
TObject destructor. | |
void | AbstractMethod (const char *method) const |
Use this method to implement an "abstract" method that you don't want to leave purely abstract. | |
virtual void | AppendPad (Option_t *option="") |
Append graphics object to current pad. | |
virtual void | Browse (TBrowser *b) |
Browse object. May be overridden for another default action. | |
ULong_t | CheckedHash () |
Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object. | |
virtual const char * | ClassName () const |
Returns name of class to which the object belongs. | |
virtual void | Delete (Option_t *option="") |
Delete this object. | |
virtual Int_t | DistancetoPrimitive (Int_t px, Int_t py) |
Computes distance from point (px,py) to the object. | |
virtual void | Draw (Option_t *option="") |
Default Draw method for all objects. | |
virtual void | DrawClass () const |
Draw class inheritance tree of the class to which this object belongs. | |
virtual TObject * | DrawClone (Option_t *option="") const |
Draw a clone of this object in the current selected pad for instance with: gROOT->SetSelectedPad(gPad) . | |
virtual void | Dump () const |
Dump contents of object on stdout. | |
virtual void | Error (const char *method, const char *msgfmt,...) const |
Issue error message. | |
virtual void | Execute (const char *method, const char *params, Int_t *error=0) |
Execute method on this object with the given parameter string, e.g. | |
virtual void | Execute (TMethod *method, TObjArray *params, Int_t *error=0) |
Execute method on this object with parameters stored in the TObjArray. | |
virtual void | ExecuteEvent (Int_t event, Int_t px, Int_t py) |
Execute action corresponding to an event at (px,py). | |
virtual void | Fatal (const char *method, const char *msgfmt,...) const |
Issue fatal error message. | |
virtual TObject * | FindObject (const char *name) const |
Must be redefined in derived classes. | |
virtual TObject * | FindObject (const TObject *obj) const |
Must be redefined in derived classes. | |
virtual Option_t * | GetDrawOption () const |
Get option used by the graphics system to draw this object. | |
virtual const char * | GetIconName () const |
Returns mime type name of object. | |
virtual char * | GetObjectInfo (Int_t px, Int_t py) const |
Returns string containing info about the object at position (px,py). | |
virtual Option_t * | GetOption () const |
virtual UInt_t | GetUniqueID () const |
Return the unique object id. | |
virtual Bool_t | HandleTimer (TTimer *timer) |
Execute action in response of a timer timing out. | |
Bool_t | HasInconsistentHash () const |
Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e. | |
virtual void | Info (const char *method, const char *msgfmt,...) const |
Issue info message. | |
virtual Bool_t | InheritsFrom (const char *classname) const |
Returns kTRUE if object inherits from class "classname". | |
virtual Bool_t | InheritsFrom (const TClass *cl) const |
Returns kTRUE if object inherits from TClass cl. | |
virtual void | Inspect () const |
Dump contents of this object in a graphics canvas. | |
void | InvertBit (UInt_t f) |
Bool_t | IsDestructed () const |
IsDestructed. | |
virtual Bool_t | IsEqual (const TObject *obj) const |
Default equal comparison (objects are equal if they have the same address in memory). | |
virtual Bool_t | IsFolder () const |
Returns kTRUE in case object contains browsable objects (like containers or lists of other objects). | |
R__ALWAYS_INLINE Bool_t | IsOnHeap () const |
R__ALWAYS_INLINE Bool_t | IsZombie () const |
void | MayNotUse (const char *method) const |
Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary). | |
virtual Bool_t | Notify () |
This method must be overridden to handle object notification. | |
void | Obsolete (const char *method, const char *asOfVers, const char *removedFromVers) const |
Use this method to declare a method obsolete. | |
void | operator delete (void *ptr) |
Operator delete. | |
void | operator delete[] (void *ptr) |
Operator delete []. | |
void * | operator new (size_t sz) |
void * | operator new (size_t sz, void *vp) |
void * | operator new[] (size_t sz) |
void * | operator new[] (size_t sz, void *vp) |
TObject & | operator= (const TObject &rhs) |
TObject assignment operator. | |
virtual void | Paint (Option_t *option="") |
This method must be overridden if a class wants to paint itself. | |
virtual void | Pop () |
Pop on object drawn in a pad to the top of the display list. | |
virtual Int_t | Read (const char *name) |
Read contents of object with specified name from the current directory. | |
virtual void | RecursiveRemove (TObject *obj) |
Recursively remove this object from a list. | |
void | ResetBit (UInt_t f) |
virtual void | SaveAs (const char *filename="", Option_t *option="") const |
Save this object in the file specified by filename. | |
virtual void | SavePrimitive (std::ostream &out, Option_t *option="") |
Save a primitive as a C++ statement(s) on output stream "out". | |
void | SetBit (UInt_t f) |
void | SetBit (UInt_t f, Bool_t set) |
Set or unset the user status bits as specified in f. | |
virtual void | SetDrawOption (Option_t *option="") |
Set drawing option for object. | |
virtual void | SetUniqueID (UInt_t uid) |
Set the unique object id. | |
virtual void | SysError (const char *method, const char *msgfmt,...) const |
Issue system error message. | |
R__ALWAYS_INLINE Bool_t | TestBit (UInt_t f) const |
Int_t | TestBits (UInt_t f) const |
virtual void | UseCurrentStyle () |
Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked. | |
virtual void | Warning (const char *method, const char *msgfmt,...) const |
Issue warning message. | |
virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) |
Write this object to the current directory. | |
virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) const |
Write this object to the current directory. | |
Public Member Functions inherited from RooPrintable | |
RooPrintable () | |
virtual | ~RooPrintable () |
virtual StyleOption | defaultPrintStyle (Option_t *opt) const |
virtual void | printExtras (std::ostream &os) const |
Interface to print extras of object. | |
virtual void | printStream (std::ostream &os, Int_t contents, StyleOption style, TString indent="") const |
Print description of object on ostream, printing contents set by contents integer, which is interpreted as an OR of 'enum ContentsOptions' values and in the style given by 'enum StyleOption'. | |
Protected Member Functions | |
virtual RooArgSet * | actualObservables (const RooArgSet &nset) const |
Return the observables to be cached given the normalization set nset. | |
virtual RooArgSet * | actualParameters (const RooArgSet &nset) const |
Return the parameters on which the cache depends given normalization set nset. | |
void | calcParams () |
(Re)calculate effective parameters of this p.d.f. | |
virtual PdfCacheElem * | createCache (const RooArgSet *nset) const |
Return specialized cache subclass for FFT calculations. | |
virtual Double_t | evaluate () const |
Evaluate this PDF / function / constant. Needs to be overridden by all derived classes. | |
virtual void | fillCacheObject (PdfCacheElem &cache) const |
Fill the contents of the cache the FFT convolution output. | |
void | fillCacheSlice (FFTCacheElem &cache, const RooArgSet &slicePosition) const |
Fill a slice of cachePdf with the output of the FFT convolution calculation. | |
virtual RooAbsGenContext * | genContext (const RooArgSet &vars, const RooDataSet *prototype=0, const RooArgSet *auxProto=0, Bool_t verbose=kFALSE) const |
Create appropriate generator context for this convolution. | |
virtual TString | histNameSuffix () const |
Suffix for cache histogram (added in addition to suffix for cache name) | |
virtual const char * | inputBaseName () const |
Return base name component for cache components in this case 'PDF1_CONV_PDF2'. | |
virtual RooAbsArg & | pdfObservable (RooAbsArg &histObservable) const |
Return p.d.f. | |
Bool_t | redirectServersHook (const RooAbsCollection &newServerList, Bool_t mustReplaceAll, Bool_t nameChange, Bool_t isRecursive) |
calcParams() ; | |
std::vector< double > | scanPdf (RooRealVar &obs, RooAbsPdf &pdf, const RooDataHist &hist, const RooArgSet &slicePos, Int_t &N, Int_t &N2, Int_t &zeroBin, Double_t shift) const |
Scan the values of 'pdf' in observable 'obs' using the bin values stored in 'hist' at slice position 'slicePos' N is filled with the number of bins defined in hist, N2 is filled with N plus the number of buffer bins The return value is an array of doubles of length N2 with the sampled values. | |
Protected Member Functions inherited from RooAbsCachedPdf | |
virtual const char * | binningName () const |
std::string | cacheNameSuffix (const RooArgSet &nset) const |
Construct string with unique suffix for cache objects based on observable names that define cache configuration. | |
void | clearCacheObject (PdfCacheElem &cache) const |
Mark all bins of given cache as unitialized (value -1) | |
void | computeBatch (cudaStream_t *, double *output, size_t size, RooFit::Detail::DataMap const &) const |
Base function for computing multiple values of a RooAbsReal. | |
void | disableCache (bool flag) |
PdfCacheElem * | getCache (const RooArgSet *nset, bool recalculate=true) const |
Retrieve cache object associated with given choice of observables. | |
virtual const char * | payloadUniqueSuffix () const |
Protected Member Functions inherited from RooAbsPdf | |
RooAbsPdf (const RooAbsPdf &other, const char *name=0) | |
Copy constructor. | |
double | normalizeWithNaNPacking (double rawVal, double normVal) const |
virtual RooPlot * | plotOn (RooPlot *frame, PlotOpt o) const |
Plot oneself on 'frame'. | |
Int_t * | randomizeProtoOrder (Int_t nProto, Int_t nGen, Bool_t resample=kFALSE) const |
Return lookup table with randomized order for nProto prototype events. | |
virtual Bool_t | syncNormalization (const RooArgSet *dset, Bool_t adjustProxies=kTRUE) const |
Verify that the normalization integral cached with this PDF is valid for given set of normalization observables. | |
Protected Member Functions inherited from RooAbsReal | |
virtual void | attachToTree (TTree &t, Int_t bufSize=32000) |
Attach object to a branch of given TTree. | |
virtual void | attachToVStore (RooVectorDataStore &vstore) |
RooFitResult * | chi2FitDriver (RooAbsReal &fcn, RooLinkedList &cmdList) |
Internal driver function for chi2 fits. | |
virtual void | copyCache (const RooAbsArg *source, Bool_t valueOnly=kFALSE, Bool_t setValDirty=kTRUE) |
Copy the cached value of another RooAbsArg to our cache. | |
RooAbsReal * | createIntObj (const RooArgSet &iset, const RooArgSet *nset, const RooNumIntConfig *cfg, const char *rangeName) const |
Internal utility function for createIntegral() that creates the actual integral object. | |
virtual RooSpan< double > | evaluateBatch (std::size_t, std::size_t)=delete |
virtual RooSpan< double > | evaluateSpan (RooBatchCompute::RunContext &evalData, const RooArgSet *normSet) const |
Evaluate this object for a batch/span of data points. | |
virtual void | fillTreeBranch (TTree &t) |
Fill the tree branch that associated with this object with its current value. | |
void | findInnerMostIntegration (const RooArgSet &allObs, RooArgSet &innerObs, const char *rangeName) const |
Utility function for createIntObj() that aids in the construct of recursive integrals over functions with multiple observables with parameterized ranges. | |
TString | integralNameSuffix (const RooArgSet &iset, const RooArgSet *nset=0, const char *rangeName=0, Bool_t omitEmpty=kFALSE) const |
Construct string with unique suffix name to give to integral object that encodes integrated observables, normalization observables and the integration range name. | |
Bool_t | isSelectedComp () const |
If true, the current pdf is a selected component (for use in plotting) | |
virtual bool | isValid () const |
Check if current value is valid. | |
virtual bool | isValidReal (double, bool printError=false) const |
Interface function to check if given value is a valid value for this object. Returns true unless overridden. | |
void | makeProjectionSet (const RooAbsArg *plotVar, const RooArgSet *allVars, RooArgSet &projectedVars, Bool_t silent) const |
Utility function for plotOn() that constructs the set of observables to project when plotting ourselves as function of 'plotVar'. | |
Bool_t | matchArgs (const RooArgSet &allDeps, RooArgSet &numDeps, const RooArgProxy &a) const |
Utility function for use in getAnalyticalIntegral(). | |
Bool_t | matchArgs (const RooArgSet &allDeps, RooArgSet &numDeps, const RooArgProxy &a, const RooArgProxy &b) const |
Utility function for use in getAnalyticalIntegral(). | |
Bool_t | matchArgs (const RooArgSet &allDeps, RooArgSet &numDeps, const RooArgProxy &a, const RooArgProxy &b, const RooArgProxy &c) const |
Utility function for use in getAnalyticalIntegral(). | |
Bool_t | matchArgs (const RooArgSet &allDeps, RooArgSet &numDeps, const RooArgProxy &a, const RooArgProxy &b, const RooArgProxy &c, const RooArgProxy &d) const |
Utility function for use in getAnalyticalIntegral(). | |
Bool_t | matchArgs (const RooArgSet &allDeps, RooArgSet &numDeps, const RooArgSet &set) const |
Utility function for use in getAnalyticalIntegral(). | |
virtual RooPlot * | plotAsymOn (RooPlot *frame, const RooAbsCategoryLValue &asymCat, PlotOpt o) const |
void | plotOnCompSelect (RooArgSet *selNodes) const |
Helper function for plotting of composite p.d.fs. | |
RooPlot * | plotOnWithErrorBand (RooPlot *frame, const RooFitResult &fr, Double_t Z, const RooArgSet *params, const RooLinkedList &argList, Bool_t method1) const |
Plot function or PDF on frame with support for visualization of the uncertainty encoded in the given fit result fr. | |
Bool_t | plotSanityChecks (RooPlot *frame) const |
Utility function for plotOn(), perform general sanity check on frame to ensure safe plotting operations. | |
void | selectComp (Bool_t flag) |
virtual void | selectNormalization (const RooArgSet *depSet=0, Bool_t force=kFALSE) |
Interface function to force use of a given set of observables to interpret function value. | |
virtual void | selectNormalizationRange (const char *rangeName=0, Bool_t force=kFALSE) |
Interface function to force use of a given normalization range to interpret function value. | |
virtual void | setTreeBranchStatus (TTree &t, Bool_t active) |
(De)Activate associated tree branch | |
virtual void | syncCache (const RooArgSet *set=0) |
Double_t | traceEval (const RooArgSet *set) const |
Calculate current value of object, with error tracing wrapper. | |
Protected Member Functions inherited from RooAbsArg | |
void | attachToStore (RooAbsDataStore &store) |
Attach this argument to the data store such that it reads data from there. | |
TString | cleanBranchName () const |
Construct a mangled name from the actual name that is free of any math symbols that might be interpreted by TTree. | |
void | clearShapeDirty () const |
void | clearValueAndShapeDirty () const |
void | clearValueDirty () const |
virtual void | getObservablesHook (const RooArgSet *, RooArgSet *) const |
virtual void | getParametersHook (const RooArgSet *, RooArgSet *, Bool_t) const |
void | graphVizAddConnections (std::set< std::pair< RooAbsArg *, RooAbsArg * > > &) |
Utility function that inserts all point-to-point client-server connections between any two RooAbsArgs in the expression tree headed by this object in the linkSet argument. | |
Bool_t | inhibitDirty () const |
Delete watch flag. | |
virtual void | ioStreamerPass2 () |
Method called by workspace container to finalize schema evolution issues that cannot be handled in a single ioStreamer pass. | |
virtual void | operModeHook () |
virtual void | optimizeDirtyHook (const RooArgSet *) |
void | printAttribList (std::ostream &os) const |
Transient boolean attributes (not copied in ctor) | |
void | registerProxy (RooArgProxy &proxy) |
Register an RooArgProxy in the proxy list. | |
void | registerProxy (RooListProxy &proxy) |
Register an RooListProxy in the proxy list. | |
void | registerProxy (RooSetProxy &proxy) |
Register an RooSetProxy in the proxy list. | |
void | setProxyNormSet (const RooArgSet *nset) |
Forward a change in the cached normalization argset to all the registered proxies. | |
void | setShapeDirty (const RooAbsArg *source) |
Notify that a shape-like property (e.g. binning) has changed. | |
void | setValueDirty (const RooAbsArg *source) |
Force element to re-evaluate itself when a value is requested. | |
void | unRegisterProxy (RooArgProxy &proxy) |
Remove proxy from proxy list. | |
void | unRegisterProxy (RooListProxy &proxy) |
Remove proxy from proxy list. | |
void | unRegisterProxy (RooSetProxy &proxy) |
Remove proxy from proxy list. | |
Protected Member Functions inherited from TObject | |
virtual void | DoError (int level, const char *location, const char *fmt, va_list va) const |
Interface to ErrorHandler (protected). | |
void | MakeZombie () |
Private Member Functions | |
void | prepareFFTBinning (RooRealVar &convVar) const |
Try to improve the binning and inform user if possible. | |
Friends | |
class | FFTCacheElem |
class | RooConvGenContext |
Additional Inherited Members | |
Static Public Member Functions inherited from RooAbsPdf | |
static RooNumGenConfig * | defaultGeneratorConfig () |
Returns the default numeric MC generator configuration for all RooAbsReals. | |
static int | verboseEval () |
Return global level of verbosity for p.d.f. evaluations. | |
static void | verboseEval (Int_t stat) |
Change global level of verbosity for p.d.f. evaluations. | |
Static Public Member Functions inherited from RooAbsReal | |
static void | clearEvalErrorLog () |
Clear the stack of evaluation error messages. | |
static RooNumIntConfig * | defaultIntegratorConfig () |
Returns the default numeric integration configuration for all RooAbsReals. | |
static EvalErrorIter | evalErrorIter () |
static ErrorLoggingMode | evalErrorLoggingMode () |
Return current evaluation error logging mode. | |
static Bool_t | hideOffset () |
static void | logEvalError (const RooAbsReal *originator, const char *origName, const char *message, const char *serverValueString=0) |
Interface to insert remote error logging messages received by RooRealMPFE into current error loggin stream. | |
static Int_t | numEvalErrorItems () |
static Int_t | numEvalErrors () |
Return the number of logged evaluation errors since the last clearing. | |
static void | printEvalErrors (std::ostream &os=std::cout, Int_t maxPerNode=10000000) |
Print all outstanding logged evaluation error on the given ostream. | |
static void | setEvalErrorLoggingMode (ErrorLoggingMode m) |
Set evaluation error logging mode. | |
static void | setHideOffset (Bool_t flag) |
Static Public Member Functions inherited from RooAbsArg | |
static void | setDirtyInhibit (Bool_t flag) |
Control global dirty inhibit mode. | |
static void | verboseDirty (Bool_t flag) |
Activate verbose messaging related to dirty flag propagation. | |
Static Public Member Functions inherited from TObject | |
static Longptr_t | GetDtorOnly () |
Return destructor only flag. | |
static Bool_t | GetObjectStat () |
Get status of object stat flag. | |
static void | SetDtorOnly (void *obj) |
Set destructor only flag. | |
static void | SetObjectStat (Bool_t stat) |
Turn on/off tracking of objects in the TObjectTable. | |
Static Public Member Functions inherited from RooPrintable | |
static std::ostream & | defaultPrintStream (std::ostream *os=0) |
Return a reference to the current default stream to use in Print(). | |
static void | nameFieldLength (Int_t newLen) |
Set length of field reserved from printing name of RooAbsArgs in multi-line collection printing to given amount. | |
Protected Types inherited from TObject | |
enum | { kOnlyPrepStep = BIT(3) } |
Static Protected Member Functions inherited from RooAbsReal | |
static void | globalSelectComp (Bool_t flag) |
Global switch controlling the activation of the selectComp() functionality. | |
Static Protected Member Functions inherited from RooAbsArg | |
static void | ioStreamerPass2Finalize () |
Method called by workspace container to finalize schema evolution issues that cannot be handled in a single ioStreamer pass. | |
Static Protected Attributes inherited from RooAbsPdf | |
static TString | _normRangeOverride |
static Int_t | _verboseEval = 0 |
Static Protected Attributes inherited from RooAbsReal | |
static Bool_t | _globalSelectComp = false |
Component selection flag for RooAbsPdf::plotCompOn. | |
static Bool_t | _hideOffset = kTRUE |
Static Protected Attributes inherited from RooAbsArg | |
static Bool_t | _inhibitDirty |
static Bool_t | _verboseDirty |
cache of the list of proxies. Avoids type casting. | |
Static Protected Attributes inherited from RooPrintable | |
static Int_t | _nameLength |
#include <RooFFTConvPdf.h>
Enumerator | |
---|---|
Extend | |
Mirror | |
Flat |
Definition at line 47 of file RooFFTConvPdf.h.
|
inline |
Definition at line 28 of file RooFFTConvPdf.h.
RooFFTConvPdf::RooFFTConvPdf | ( | const char * | name, |
const char * | title, | ||
RooRealVar & | convVar, | ||
RooAbsPdf & | pdf1, | ||
RooAbsPdf & | pdf2, | ||
Int_t | ipOrder = 2 |
||
) |
Constructor for numerical (FFT) convolution of PDFs.
[in] | name | Name of this PDF |
[in] | title | Title for plotting this PDF |
[in] | convVar | Observable to convolve the PDFs in |
[in] | pdf1 | First PDF to be convolved |
[in] | pdf2 | Second PDF to be convolved |
[in] | ipOrder | Order for interpolation between bins (since FFT is discrete) The binning used for the FFT sampling is controlled by the binning named "cache" in the convolution observable convVar . If such a binning is not set, the same number of bins as for convVar will be used. |
Definition at line 150 of file RooFFTConvPdf.cxx.
RooFFTConvPdf::RooFFTConvPdf | ( | const char * | name, |
const char * | title, | ||
RooAbsReal & | pdfConvVar, | ||
RooRealVar & | convVar, | ||
RooAbsPdf & | pdf1, | ||
RooAbsPdf & | pdf2, | ||
Int_t | ipOrder = 2 |
||
) |
Constructor for numerical (FFT) convolution of PDFs.
[in] | name | Name of this PDF |
[in] | title | Title for plotting this PDF |
[in] | convVar | Observable to convolve the PDFs in |
[in] | pdf1 | First PDF to be convolved |
[in] | pdf2 | Second PDF to be convolved |
[in] | ipOrder | Order for interpolation between bins (since FFT is discrete) The binning used for the FFT sampling is controlled by the binning named "cache" in the convolution observable convVar . If such a binning is not set, the same number of bins as for convVar will be used. |
[in] | pdfConvVar | If the variable used for convolution is a PDF, itself, pass the PDF here, and pass the convolution variable to convVar . See also rf210_angularconv.C in the roofit tutorials |
Definition at line 176 of file RooFFTConvPdf.cxx.
RooFFTConvPdf::RooFFTConvPdf | ( | const RooFFTConvPdf & | other, |
const char * | name = 0 |
||
) |
Copy constructor.
Definition at line 201 of file RooFFTConvPdf.cxx.
|
virtual |
Destructor.
Definition at line 221 of file RooFFTConvPdf.cxx.
Return the observables to be cached given the normalization set nset.
If the cache observable is in nset then this is
In case the cache observable is not in nset, then it is
Implements RooAbsCachedPdf.
Definition at line 689 of file RooFFTConvPdf.cxx.
Return the parameters on which the cache depends given normalization set nset.
For this p.d.f these are the parameters of the input p.d.f. but never the convolution variable, in case it is not part of nset.
Implements RooAbsCachedPdf.
Definition at line 744 of file RooFFTConvPdf.cxx.
|
inline |
Definition at line 41 of file RooFFTConvPdf.h.
|
inline |
Definition at line 48 of file RooFFTConvPdf.h.
|
inline |
Definition at line 39 of file RooFFTConvPdf.h.
|
protected |
(Re)calculate effective parameters of this p.d.f.
Definition at line 868 of file RooFFTConvPdf.cxx.
|
inlinevirtual |
Implements RooAbsArg.
Definition at line 34 of file RooFFTConvPdf.h.
|
protectedvirtual |
Return specialized cache subclass for FFT calculations.
Reimplemented from RooAbsCachedPdf.
Definition at line 271 of file RooFFTConvPdf.cxx.
|
inlineprotectedvirtual |
Evaluate this PDF / function / constant. Needs to be overridden by all derived classes.
Implements RooAbsReal.
Definition at line 97 of file RooFFTConvPdf.h.
|
protectedvirtual |
Fill the contents of the cache the FFT convolution output.
Implements RooAbsCachedPdf.
Definition at line 408 of file RooFFTConvPdf.cxx.
|
protected |
Fill a slice of cachePdf with the output of the FFT convolution calculation.
Definition at line 488 of file RooFFTConvPdf.cxx.
|
protectedvirtual |
Create appropriate generator context for this convolution.
If both input p.d.f.s support internal generation, if it is safe to use them and if no observables other than the convolution observable are requested for generation, use the specialized convolution generator context which implements a smearing strategy in the convolution observable. If not return the regular accept/reject generator context
Reimplemented from RooAbsPdf.
Definition at line 775 of file RooFFTConvPdf.cxx.
Advertise capability to determine maximum value of function for given set of observables.
If no direct generator method is provided, this information will assist the accept/reject generator to operate more efficiently as it can skip the initial trial sampling phase to empirically find the function maximum
Reimplemented from RooAbsReal.
Definition at line 61 of file RooFFTConvPdf.h.
|
protectedvirtual |
Suffix for cache histogram (added in addition to suffix for cache name)
Reimplemented from RooAbsCachedPdf.
Definition at line 377 of file RooFFTConvPdf.cxx.
|
protectedvirtual |
Return base name component for cache components in this case 'PDF1_CONV_PDF2'.
Implements RooAbsCachedPdf.
Definition at line 256 of file RooFFTConvPdf.cxx.
Return maximum value for set of observables identified by code assigned in getMaxVal.
Reimplemented from RooAbsReal.
Definition at line 62 of file RooFFTConvPdf.h.
Return p.d.f.
observable (which can be a function) to substitute given p.d.f. observable. Substitutes x by xprime if xprime is set.
Reimplemented from RooAbsCachedPdf.
Definition at line 758 of file RooFFTConvPdf.cxx.
|
private |
Try to improve the binning and inform user if possible.
With a 10% buffer fraction, 930 raw bins yield 1024 FFT bins, a sweet spot for the speed of FFTW.
Definition at line 231 of file RooFFTConvPdf.cxx.
|
virtual |
Customized printing of arguments of a RooNumConvPdf to more intuitively reflect the contents of the product operator construction.
Reimplemented from RooAbsArg.
Definition at line 858 of file RooFFTConvPdf.cxx.
|
protectedvirtual |
|
protected |
Scan the values of 'pdf' in observable 'obs' using the bin values stored in 'hist' at slice position 'slicePos' N is filled with the number of bins defined in hist, N2 is filled with N plus the number of buffer bins The return value is an array of doubles of length N2 with the sampled values.
The caller takes ownership of the array
Definition at line 576 of file RooFFTConvPdf.cxx.
Change the size of the buffer on either side of the observable range to frac
times the size of the range of the convolution observable.
Definition at line 823 of file RooFFTConvPdf.cxx.
Change strategy to fill the overflow buffer on either side of the convolution observable range.
Extend
means is that the input p.d.f convolution observable range is widened to include the buffer rangeFlat
means that the buffer is filled with the p.d.f. value at the boundary of the observable rangeMirror
means that the buffer is filled with a mirror image of the p.d.f. around the convolution observable boundaryThe default strategy is extend. If one of the input p.d.f.s is a RooAddPdf, it is configured so that the interpretation range of the fraction coefficients is kept at the nominal convolutions observable range (instead of interpreting coefficients in the widened range including the buffer).
Definition at line 847 of file RooFFTConvPdf.cxx.
Definition at line 38 of file RooFFTConvPdf.h.
Definition at line 37 of file RooFFTConvPdf.h.
|
friend |
Definition at line 95 of file RooFFTConvPdf.h.
|
friend |
Definition at line 118 of file RooFFTConvPdf.h.
|
protected |
Definition at line 109 of file RooFFTConvPdf.h.
|
protected |
Definition at line 110 of file RooFFTConvPdf.h.
|
protected |
Definition at line 119 of file RooFFTConvPdf.h.
|
protected |
Definition at line 71 of file RooFFTConvPdf.h.
|
protected |
Definition at line 69 of file RooFFTConvPdf.h.
|
protected |
Definition at line 70 of file RooFFTConvPdf.h.
|
protected |
Definition at line 112 of file RooFFTConvPdf.h.
|
protected |
Definition at line 113 of file RooFFTConvPdf.h.
|
protected |
Definition at line 67 of file RooFFTConvPdf.h.
|
protected |
Definition at line 68 of file RooFFTConvPdf.h.