class TGTextEntry: public TGFrame, public TGWidget

 Create a text entry widget. It will adopt the TGTextBuffer object
 (i.e. the text buffer will be deleted by the text entry widget).

 Simple text entry constructor.

 Simple test entry constructor. Notice TString argument comes before the
 parent argument (to make this ctor different from the first one taking a
 const char*).

 Delete a text entry widget.

 Do default initialization.

 This signal is emitted when the return or enter key is pressed.

 This signal is emitted when <SHIFT> and <TAB> keys are pressed.

 This signal is emitted when the <TAB> key is pressed.

 This signal is emitted every time the text has changed.

 This signal is emitted when cursor is going out of left side.

 This signal is emitted when cursor is going out of right side.

 This signal is emitted when cursor is going out of upper side.

 This signal is emitted when cursor is going out of bottom side.

 This signal is emitted when widget is double clicked.

 Returns the text that's currently displayed.  This is normally
 the same as GetText(), but can be e.g.
 "*****" if EEchoMode is kPassword or
 ""      if it is kNoEcho.

 Set state of widget. If kTRUE=enabled, kFALSE=disabled.

 Returns the index of the character to whose left edge xcoord is closest.

 Sets the text entry to draw itself inside a two-pixel frame if
 enable is kTRUE, and to draw itself without any frame if enable is
 kFALSE. The default is kTRUE.

 Sets the alignment of the text entry.
 Possible values are kTextLeft(default), kTextRight, kTextCenterX.
 See also GetAlignment().

 Sets the mode how characters are entered to the text entry.

 Sets text entry to text, clears the selection and moves
 the cursor to the end of the line.
 If necessary the text is truncated to fit MaxLength().
 See also  GetText().

 Set the maximum length of the text in the editor.  If the text is
 currently too long, it is chopped off at the limit. Any marked text will
 be unmarked.  The cursor position is set to 0 and the first part of the
 string is shown.
 See  also GetMaxLength().

 The echo modes available are:

• kNormal - display characters as they are entered. This is the default.
• kNoEcho - do not display anything.
• kPassword - display asterisks instead of the characters actually entered.

 It is always possible to cut and paste any marked text;  only the widget's own
 display is affected.
 See also GetEchoMode(), GetDisplayText().

 Returns the text marked by the user (e.g. by clicking and
 dragging), or zero if no text is marked.
 See also HasMarkedText().

 New character mark at position pos.
 See also SetCursorPosition().

 Set the cursor position to newPos.
 See also NewMark().

 Marks the word nearest to cursor position.
 See also HandleDoubleClick().

 Removes any currently selected text, inserts newText,
 sets it as the new contents of the text entry.

 Moves the cursor rightwards one or more characters.
 See also CursorLeft().

 Moves the cursor leftwards one or more characters.
 See also CursorRight().

 Moves the cursor one word to the right.  If mark is kTRUE, the text
 is marked.
 See also CursorWordBackward().

 Moves the cursor one word to the left.  If mark is kTRUE, the text
 is marked.
 See also CursorWordForward().

 Deletes the character on the left side of the text cursor and moves the
 cursor one position to the left. If a text has been marked by the user
 (e.g. by clicking and dragging) the cursor will be put at the beginning
 of the marked text and the marked text will be removed.
 See also  Del().

 Deletes the character on the right side of the text cursor. If a text
 has been marked by the user (e.g. by clicking and dragging) the cursor
 will be put at the beginning of the marked text and the marked text will
 be removed.
 See also Backspace().

 Deletes all characters on the right side of the cursor.
 See also Del() Backspace().

 Copies the marked text to the clipboard, if there is any and
 GetEchoMode() is kNormal.
 See also  Cut() Paste().

 Inserts text at the cursor position, deleting any
 previous marked text.
 See also CopyText() Cut().

 Copies the marked text to the clipboard and deletes it, if there is any.
 See also CopyText() Paste().

 Clears up the text entry.

 Moves the text cursor to the left end of the line. If mark is kTRUE text
 will be marked towards the first position, if not any marked text will
 be unmarked if the cursor is moved.
 See also End().

 Moves the text cursor to the right end of the line. If mark is kTRUE text
 will be marked towards the last position, if not any marked text will
 be unmarked if the cursor is moved.
 See also Home().

 Selects all text (i.e. marks it) and moves the cursor to the
 end. Useful when a default value has been inserted. If the user
 types before clicking on the widget the selected text will be
 erased.

 Deselects all text (i.e. removes marking) and leaves the cursor at the
 current position.

 Draw the border of the text entry widget.

 Draw the text entry widget.

 The key press event handler converts a key press to some line editor
 action. Here are the default key bindings:

• Left Arrow Move the cursor one character leftwards. Scroll the text when cursor is out of frame.
• Right Arrow Move the cursor one character rightwards Scroll the text when cursor is out of frame.
• Backspace Deletes the character on the left side of the text cursor and moves the cursor one position to the left. If a text has been marked by the user (e.g. by clicking and dragging) the cursor will be put at the beginning of the marked text and the marked text will be removed.
• Home Moves the text cursor to the left end of the line. If mark is TRUE text will be marked towards the first position, if not any marked text will be unmarked if the cursor is moved.
• End Moves the text cursor to the right end of the line. If mark is TRUE text will be marked towards the last position, if not any marked text will be unmarked if the cursor is moved.
• Delete Deletes the character on the right side of the text cursor. If a text has been marked by the user (e.g. by clicking and dragging) the cursor will be put at the beginning of the marked text and the marked text will be removed.
• Insert Switches character insert mode.
• Shift - Left Arrow Mark text one character leftwards
• Shift - Right Arrow Mark text one character rightwards
• Control - Left Arrow Move the cursor one word leftwards
• Control - Right Arrow Move the cursor one word rightwards.
• Control - Shift - Left Arrow Mark text one word leftwards
• Control - Shift - Right Arrow Mark text one word rightwards
• Control-A Move the cursor to the beginning of the line
• Control-B Move the cursor one character leftwards
• Control-C Copy the marked text to the clipboard.
• Control-D Delete the character to the right of the cursor
• Control-E Move the cursor to the end of the line
• Control-F Move the cursor one character rightwards
• Control-H Delete the character to the left of the cursor
• Control-K Delete marked text if any or delete all characters to the right of the cursor
• Control-U Delete all characters on the line
• Control-V Paste the clipboard text into line edit.
• Control-X Cut the marked text, copy to clipboard.
• Control-Y Paste the clipboard text into line edit.

  All other keys with valid ASCII codes insert themselves into the line.

 Handle mouse button event in text entry widget.

 Handle mouse crossing event.

 Handle mouse motion event in the text entry widget.

 Handle mouse double click event in the text entry widget.

 Handles resize events for this widget.

 Handle focus change event in text entry widget.

 Handle text selection event.

 Handle selection clear event.

 Handle request to send current clipboard contents to requestor window.

 Paste text from selection (either primary or cut buffer) into
 text entry widget.

 Handle cursor blink timer.

 Returns kTRUE if cursor is out of frame.

 Shift position of cursor by one character.

 Updates start text offset according GetAlignment() mode,
 if cursor is out of frame => scroll the text.
 See also SetAlignment() and ScrollByChar().

 Set tool tip text associated with this text entry. The delay is in
 milliseconds (minimum 250). To remove tool tip call method with
 text = 0.

 Set focus to this text entry.

 Inserts text at position pos, clears the selection and moves
 the cursor to the end of the line.
 If necessary the text is truncated to fit MaxLength().
 See also GetText(), SetText(), AppendText(), RemoveText().

 Appends text to the end of text entry, clears the selection
 and moves the cursor to the end of the line.
 If necessary the text is truncated to fit MaxLength().
 See also GetText(), InsertText(), SetText(), RemoveText().

 Removes text at the range, clears the selection and moves
 the cursor to the end of the line.
 See also GetText(), InsertText(), SetText(), AppendText().

 Changes text font.
 If local is kTRUE font is changed locally.

 Changes text font specified by name.
 If local is kTRUE font is changed locally.

 Changes text font specified by pointer to TGFont object.
 If local is kTRUE font is changed locally.

 Changes text color.
 If local is true color is changed locally.

 Changes text color.
 If local is true color is changed locally.

 Return default font structure in use.

 Return default graphics context.

 Return selection graphics context.

 Return graphics context for highlighted frame background.

 Save a text entry widget as a C++ statement(s) on output stream out.