rf901_numintconfig.C File Reference

Detailed Description

Numeric algorithm tuning: configuration and customization of how numeric (partial) integrals are executed

 
#include "RooRealVar.h"
#include "RooDataSet.h"
#include "RooGaussian.h"
#include "TCanvas.h"
#include "TAxis.h"
#include "RooPlot.h"
#include "RooNumIntConfig.h"
#include "RooLandau.h"
#include "RooArgSet.h"
#include <iomanip>
using namespace RooFit;
 
void rf901_numintconfig()
{
 
   // A d j u s t   g l o b a l   1 D   i n t e g r a t i o n   p r e c i s i o n
   // ----------------------------------------------------------------------------
 
   // Print current global default configuration for numeric integration strategies
   RooAbsReal::defaultIntegratorConfig()->Print("v");
 
   // Example: Change global precision for 1D integrals from 1e-7 to 1e-6
   //
   // The relative epsilon (change as fraction of current best integral estimate) and
   // absolute epsilon (absolute change w.r.t last best integral estimate) can be specified
   // separately. For most pdf integrals the relative change criterium is the most important,
   // however for certain non-pdf functions that integrate out to zero a separate absolute
   // change criterium is necessary to declare convergence of the integral
   //
   // NB: This change is for illustration only. In general the precision should be at least 1e-7
   // for normalization integrals for MINUIT to succeed.
   //
   RooAbsReal::defaultIntegratorConfig()->setEpsAbs(1e-6);
   RooAbsReal::defaultIntegratorConfig()->setEpsRel(1e-6);
 
   // N u m e r i c   i n t e g r a t i o n   o f   l a n d a u   p d f
   // ------------------------------------------------------------------
 
   RooRealVar x("x", "x", -10, 10);
   RooLandau landau("landau", "landau", x, 0.0, 0.1);
 
   // Disable analytic integration from demonstration purposes
   landau.forceNumInt(true);
 
   // Activate debug-level messages for topic integration to be able to follow actions below
   RooMsgService::instance().addStream(DEBUG, Topic(Integration));
 
   // Calculate integral over landau with default choice of numeric integrator
   std::unique_ptr<RooAbsReal> intLandau{landau.createIntegral(x)};
   double val = intLandau->getVal();
   cout << " [1] int_dx landau(x) = " << setprecision(15) << val << endl;
 
   // S a m e   w i t h   c u s t o m   c o n f i g u r a t i o n
   // -----------------------------------------------------------
 
   // Construct a custom configuration which uses the adaptive Gauss-Kronrod technique
   // for closed 1D integrals
   RooNumIntConfig customConfig(*RooAbsReal::defaultIntegratorConfig());
#ifdef R__HAS_MATHMORE
   customConfig.method1D().setLabel("RooAdaptiveGaussKronrodIntegrator1D");
#else
   Warning("rf901_numintconfig","ROOT is built without Mathmore (GSL) support. Cannot use RooAdaptiveGaussKronrodIntegrator1D");
#endif
 
   // Calculate integral over landau with custom integral specification
   std::unique_ptr<RooAbsReal> intLandau2{landau.createIntegral(x, NumIntConfig(customConfig))};
   double val2 = intLandau2->getVal();
   cout << " [2] int_dx landau(x) = " << val2 << endl;
 
   // A d j u s t i n g   d e f a u l t   c o n f i g   f o r   a   s p e c i f i c   p d f
   // -------------------------------------------------------------------------------------
 
   // Another possibility: associate custom numeric integration configuration as default for object 'landau'
   landau.setIntegratorConfig(customConfig);
 
   // Calculate integral over landau custom numeric integrator specified as object default
   std::unique_ptr<RooAbsReal> intLandau3{landau.createIntegral(x)};
   double val3 = intLandau3->getVal();
   cout << " [3] int_dx landau(x) = " << val3 << endl;
 
   // Another possibility: Change global default for 1D numeric integration strategy on finite domains
#ifdef R__HAS_MATHMORE
   RooAbsReal::defaultIntegratorConfig()->method1D().setLabel("RooAdaptiveGaussKronrodIntegrator1D");
 
   // A d j u s t i n g   p a r a m e t e r s   o f   a   s p e c i f i c   t e c h n i q u e
   // ---------------------------------------------------------------------------------------
 
   // Adjust maximum number of steps of RooIntegrator1D in the global default configuration
   RooAbsReal::defaultIntegratorConfig()->getConfigSection("RooIntegrator1D").setRealValue("maxSteps", 30);
 
   // Example of how to change the parameters of a numeric integrator
   // (Each config section is a RooArgSet with RooRealVars holding real-valued parameters
   //  and RooCategories holding parameters with a finite set of options)
   customConfig.getConfigSection("RooAdaptiveGaussKronrodIntegrator1D").setRealValue("maxSeg", 50);
   customConfig.getConfigSection("RooAdaptiveGaussKronrodIntegrator1D").setCatLabel("method", "15Points");
 
   // Example of how to print set of possible values for "method" category
   customConfig.getConfigSection("RooAdaptiveGaussKronrodIntegrator1D").find("method")->Print("v");
#endif
 
}

 
Requested precision: 1e-07 absolute, 1e-07 relative
 
1-D integration method: RooIntegrator1D (RooImproperIntegrator1D if open-ended)
2-D integration method: RooAdaptiveIntegratorND (N/A if open-ended)
N-D integration method: RooAdaptiveIntegratorND (N/A if open-ended)
 
Available integration methods:
 
*** RooBinIntegrator ***
Capabilities: [1-D] [2-D] [N-D] 
Configuration: 
  1)  numBins = 100
 
*** RooIntegrator1D ***
Capabilities: [1-D] 
Configuration: 
  1)        sumRule = Trapezoid(idx = 0)
 
  2)  extrapolation = Wynn-Epsilon(idx = 1)
 
  3)       maxSteps = 20
  4)       minSteps = 999
  5)       fixSteps = 0
 
*** RooIntegrator2D ***
Capabilities: [2-D] 
Configuration: 
(Depends on 'RooIntegrator1D')
 
*** RooSegmentedIntegrator1D ***
Capabilities: [1-D] 
Configuration: 
  1)  numSeg = 3
(Depends on 'RooIntegrator1D')
 
*** RooSegmentedIntegrator2D ***
Capabilities: [2-D] 
Configuration: 
(Depends on 'RooSegmentedIntegrator1D')
 
*** RooImproperIntegrator1D ***
Capabilities: [1-D] [OpenEnded] 
Configuration: 
(Depends on 'RooIntegrator1D')
 
*** RooMCIntegrator ***
Capabilities: [1-D] [2-D] [N-D] 
Configuration: 
  1)   samplingMode = Importance(idx = 0)
 
  2)        genType = QuasiRandom(idx = 0)
 
  3)        verbose = false(idx = 0)
 
  4)          alpha = 1.5
  5)    nRefineIter = 5
  6)  nRefinePerDim = 1000
  7)     nIntPerDim = 5000
 
*** RooAdaptiveIntegratorND ***
Capabilities: [2-D] [N-D] 
Configuration: 
  1)  maxEval2D = 100000
  2)  maxEval3D = 1e+06
  3)  maxEvalND = 1e+07
  4)    maxWarn = 5
 
*** RooAdaptiveGaussKronrodIntegrator1D ***
Capabilities: [1-D] [OpenEnded] 
Configuration: 
  1)  maxSeg = 100
  2)  method = 21Points(idx = 2)
 
 
*** RooGaussKronrodIntegrator1D ***
Capabilities: [1-D] [OpenEnded] 
Configuration: 
 
[#3] INFO:Integration -- RooRealIntegral::ctor(landau_Int[x]) Constructing integral of function landau over observables(x) with normalization () with range identifier <none>
[#3] DEBUG:Integration -- landau: Adding observable x as shape dependent
[#3] DEBUG:Integration -- landau: Adding parameter 0 as value dependent
[#3] DEBUG:Integration -- landau: Adding parameter 0.1 as value dependent
[#3] INFO:Integration -- landau: Observable x is suitable for analytical integration (if supported by p.d.f)
[#3] INFO:Integration -- landau: Observables (x) are numerically integrated
[#1] INFO:NumericIntegration -- RooRealIntegral::init(landau_Int[x]) using numeric integrator RooIntegrator1D to calculate Int(x)
 [1] int_dx landau(x) = 0.0989653362054419
[#3] INFO:Integration -- RooRealIntegral::ctor(landau_Int[x]) Constructing integral of function landau over observables(x) with normalization () with range identifier <none>
[#3] DEBUG:Integration -- landau: Adding observable x as shape dependent
[#3] DEBUG:Integration -- landau: Adding parameter 0 as value dependent
[#3] DEBUG:Integration -- landau: Adding parameter 0.1 as value dependent
[#3] INFO:Integration -- landau: Observable x is suitable for analytical integration (if supported by p.d.f)
[#3] INFO:Integration -- landau: Observables (x) are numerically integrated
[#1] INFO:NumericIntegration -- RooRealIntegral::init(landau_Int[x]) using numeric integrator RooAdaptiveGaussKronrodIntegrator1D to calculate Int(x)
 [2] int_dx landau(x) = 0.098957102921895
[#3] INFO:Integration -- RooRealIntegral::ctor(landau_Int[x]) Constructing integral of function landau over observables(x) with normalization () with range identifier <none>
[#3] DEBUG:Integration -- landau: Adding observable x as shape dependent
[#3] DEBUG:Integration -- landau: Adding parameter 0 as value dependent
[#3] DEBUG:Integration -- landau: Adding parameter 0.1 as value dependent
[#3] INFO:Integration -- landau: Observable x is suitable for analytical integration (if supported by p.d.f)
[#3] INFO:Integration -- landau: Observables (x) are numerically integrated
[#1] INFO:NumericIntegration -- RooRealIntegral::init(landau_Int[x]) using numeric integrator RooAdaptiveGaussKronrodIntegrator1D to calculate Int(x)
 [3] int_dx landau(x) = 0.098957102921895
--- RooAbsArg ---
  Value State: clean
  Shape State: clean
  Attributes:  [SnapShot_ExtRefClone] 
  Address: 0x608e1d0
  Clients: 
  Servers: 
  Proxies: 
--- RooAbsCategory ---
  Value = 1 "15Points)
  Possible states:
    15Points   1
    21Points   2
    31Points   3
    41Points   4
    51Points   5
    61Points   6
    WynnEpsilon   0

Date

July 2008

Author

Wouter Verkerke

Definition in file rf901_numintconfig.C.