Parallelepiped class.

A parallelepiped is a shape having 3 pairs of parallel faces out of which one is parallel with the XY plane (Z faces). All faces are parallelograms in the general case. The Z faces have 2 edges parallel with the X-axis.

The shape has the center in the origin and it is defined by:

dX, dY, dZ: half-lengths of the projections of the edges on X, Y and Z. The lower Z face is positioned at -dZ, while the upper at +dZ.
alpha: angle between the segment defined by the centers of the X-parallel edges and Y axis [-90,90] in degrees
theta: theta angle of the segment defined by the centers of the Z faces;
phi: phi angle of the same segment

TGeoPara(dX,dY,dZ,alpha,theta,phi);

TGeoPara::TGeoPara

TGeoPara()

Default constructor.

Definition TGeoPara.cxx:72

A box is a particular parallelepiped having the parameters: (dX,dY,dZ,0.,0.,0.).

Definition at line 17 of file TGeoPara.h.

Public Member Functions
	TGeoPara ()
	Default constructor.

	TGeoPara (const char *name, Double_t dx, Double_t dy, Double_t dz, Double_t alpha, Double_t theta, Double_t phi)
	Default constructor specifying minimum and maximum radius.

	TGeoPara (Double_t *param)
	Default constructor.

	TGeoPara (Double_t dx, Double_t dy, Double_t dz, Double_t alpha, Double_t theta, Double_t phi)
	Default constructor specifying minimum and maximum radius.

	~TGeoPara () override
	destructor

Double_t	Capacity () const override
	Computes capacity of the shape in [length^3].

void	ComputeBBox () override
	compute bounding box

void	ComputeNormal (const Double_t point, const Double_t dir, Double_t *norm) override
	Compute normal to closest surface from POINT.

void	ComputeNormal_v (const Double_t points, const Double_t dirs, Double_t *norms, Int_t vecsize) override
	Compute the normal for an array o points so that norm.dot.dir is positive Input: Arrays of point coordinates and directions + vector size Output: Array of normal directions.

Bool_t	Contains (const Double_t *point) const override
	test if point is inside this sphere test Z range

void	Contains_v (const Double_t points, Bool_t inside, Int_t vecsize) const override
	Check the inside status for each of the points in the array.

Double_t	DistFromInside (const Double_t point, const Double_t dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const override
	compute distance from inside point to surface of the para Boundary safe algorithm.

void	DistFromInside_v (const Double_t points, const Double_t dirs, Double_t dists, Int_t vecsize, Double_t step) const override
	Compute distance from array of input points having directions specified by dirs. Store output in dists.

Double_t	DistFromOutside (const Double_t point, const Double_t dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=nullptr) const override
	compute distance from inside point to surface of the para

void	DistFromOutside_v (const Double_t points, const Double_t dirs, Double_t dists, Int_t vecsize, Double_t step) const override
	Compute distance from array of input points having directions specified by dirs. Store output in dists.

TGeoVolume *	Divide (TGeoVolume voldiv, const char divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step) override
	Divide this parallelepiped shape belonging to volume "voldiv" into ndiv equal volumes called divname, from start position with the given step.

Double_t	GetAlpha () const

Double_t	GetAxisRange (Int_t iaxis, Double_t &xlo, Double_t &xhi) const override
	Get range of shape for a given axis.

void	GetBoundingCylinder (Double_t *param) const override
	Fill vector param[4] with the bounding cylinder parameters.

Int_t	GetByteCount () const override

Int_t	GetFittingBox (const TGeoBBox parambox, TGeoMatrix mat, Double_t &dx, Double_t &dy, Double_t &dz) const override
	Fills real parameters of a positioned box inside this. Returns 0 if successful.

TGeoShape *	GetMakeRuntimeShape (TGeoShape mother, TGeoMatrix mat) const override
	in case shape has some negative parameters, these has to be computed in order to fit the mother

Int_t	GetNmeshVertices () const override

Double_t	GetPhi () const

Double_t	GetTheta () const

Double_t	GetTxy () const

Double_t	GetTxz () const

Double_t	GetTyz () const

Double_t	GetX () const

Double_t	GetY () const

Double_t	GetZ () const

void	InspectShape () const override
	print shape parameters

TClass *	IsA () const override

Bool_t	IsCylType () const override

Double_t	Safety (const Double_t *point, Bool_t in=kTRUE) const override
	computes the closest distance from given point to this shape, according to option.

void	Safety_v (const Double_t points, const Bool_t inside, Double_t *safe, Int_t vecsize) const override
	Compute safe distance from each of the points in the input array.

void	SavePrimitive (std::ostream &out, Option_t *option="") override
	Save a primitive as a C++ statement(s) on output stream "out".

void	SetDimensions (Double_t *param) override
	Set dimensions starting from an array.

void	SetPoints (Double_t *points) const override
	Create PARA mesh points.

void	SetPoints (Float_t *points) const override
	create sphere mesh points

void	Sizeof3D () const override
	fill size of this 3-D object

void	Streamer (TBuffer &) override
	Stream an object of class TObject.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TGeoBBox
	TGeoBBox ()
	Default constructor.

	TGeoBBox (const char name, Double_t dx, Double_t dy, Double_t dz, Double_t origin=nullptr)
	Constructor with shape name.

	TGeoBBox (Double_t *param)
	Constructor based on the array of parameters.

	TGeoBBox (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=nullptr)
	Constructor where half-lengths are provided.

	~TGeoBBox () override
	Destructor.

Bool_t	CouldBeCrossed (const Double_t point, const Double_t dir) const override
	Decides fast if the bounding box could be crossed by a vector.

Int_t	DistancetoPrimitive (Int_t px, Int_t py) override
	Compute closest distance from point px,py to each corner.

const char *	GetAxisName (Int_t iaxis) const override
	Returns name of axis IAXIS.

const TBuffer3D &	GetBuffer3D (Int_t reqSections, Bool_t localFrame) const override
	Fills a static 3D buffer and returns a reference.

virtual Double_t	GetDX () const

virtual Double_t	GetDY () const

virtual Double_t	GetDZ () const

virtual Double_t	GetFacetArea (Int_t index=0) const
	Get area in internal units of the facet with a given index.

void	GetMeshNumbers (Int_t &nvert, Int_t &nsegs, Int_t &npols) const override
	Returns numbers of vertices, segments and polygons composing the shape mesh.

virtual const Double_t *	GetOrigin () const

virtual Bool_t	GetPointsOnFacet (Int_t index, Int_t npoints, Double_t *array) const
	Fills array with n random points located on the surface of indexed facet.

Bool_t	GetPointsOnSegments (Int_t npoints, Double_t *array) const override
	Fills array with n random points located on the line segments of the shape mesh.

virtual Bool_t	IsNullBox () const

Bool_t	IsValidBox () const override

TBuffer3D *	MakeBuffer3D () const override
	Creates a TBuffer3D describing this shape.

void	SetBoxDimensions (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=nullptr)
	Set parameters of the box.

void	SetBoxPoints (Double_t *points) const
	Fill box vertices to an array.

void	SetSegsAndPols (TBuffer3D &buffer) const override
	Fills TBuffer3D structure for segments and polygons.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TGeoShape
	TGeoShape ()
	Default constructor.

	TGeoShape (const char *name)
	Default constructor.

	~TGeoShape () override
	Destructor.

virtual void	AfterStreamer ()

void	CheckShape (Int_t testNo, Int_t nsamples=10000, Option_t *option="")
	Test for shape navigation methods.

virtual void	ClearThreadData () const

virtual void	CreateThreadData (Int_t)

void	Draw (Option_t *option="") override
	Draw this shape.

void	ExecuteEvent (Int_t event, Int_t px, Int_t py) override
	Execute mouse actions on this shape.

Int_t	GetId () const

const char *	GetName () const override
	Get the shape name.

const char *	GetPointerName () const
	Provide a pointer name containing uid.

void	InvertShapeBit (UInt_t f)

TClass *	IsA () const override

virtual Bool_t	IsAssembly () const

virtual Bool_t	IsComposite () const

virtual Bool_t	IsReflected () const

Bool_t	IsRunTimeShape () const

Bool_t	IsValid () const

virtual Bool_t	IsVecGeom () const

void	Paint (Option_t *option="") override
	Paint this shape.

void	ResetShapeBit (UInt_t f)

void	SetId (Int_t id)

void	SetRuntime (Bool_t flag=kTRUE)

void	SetShapeBit (UInt_t f)

void	SetShapeBit (UInt_t f, Bool_t set)
	Equivalent of TObject::SetBit.

Int_t	ShapeDistancetoPrimitive (Int_t numpoints, Int_t px, Int_t py) const
	Returns distance to shape primitive mesh.

void	Streamer (TBuffer &) override
	Stream an object of class TObject.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Bool_t	TestShapeBit (UInt_t f) const

Int_t	TestShapeBits (UInt_t f) const

Public Member Functions inherited from TNamed
	TNamed ()

	TNamed (const char name, const char title)

	TNamed (const TNamed &named)
	TNamed copy ctor.

	TNamed (const TString &name, const TString &title)

virtual	~TNamed ()
	TNamed destructor.

void	Clear (Option_t *option="") override
	Set name and title to empty strings ("").

TObject *	Clone (const char *newname="") const override
	Make a clone of an object using the Streamer facility.

Int_t	Compare (const TObject *obj) const override
	Compare two TNamed objects.

void	Copy (TObject &named) const override
	Copy this to obj.

virtual void	FillBuffer (char *&buffer)
	Encode TNamed into output buffer.

const char *	GetName () const override
	Returns name of object.

const char *	GetTitle () const override
	Returns title of object.

ULong_t	Hash () const override
	Return hash value for this object.

TClass *	IsA () const override

Bool_t	IsSortable () const override

void	ls (Option_t *option="") const override
	List TNamed name and title.

TNamed &	operator= (const TNamed &rhs)
	TNamed assignment operator.

void	Print (Option_t *option="") const override
	Print TNamed name and title.

virtual void	SetName (const char *name)
	Set the name of the TNamed.

virtual void	SetNameTitle (const char name, const char title)
	Set all the TNamed parameters (name and title).

virtual void	SetTitle (const char *title="")
	Set the title of the TNamed.

virtual Int_t	Sizeof () const
	Return size of the TNamed part of the TObject.

void	Streamer (TBuffer &) override
	Stream an object of class TObject.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TObject
	TObject ()
	TObject constructor.

	TObject (const TObject &object)
	TObject copy ctor.

virtual	~TObject ()
	TObject destructor.

void	AbstractMethod (const char *method) const
	Use this method to implement an "abstract" method that you don't want to leave purely abstract.

virtual void	AppendPad (Option_t *option="")
	Append graphics object to current pad.

virtual void	Browse (TBrowser *b)
	Browse object. May be overridden for another default action.

ULong_t	CheckedHash ()
	Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object.

virtual const char *	ClassName () const
	Returns name of class to which the object belongs.

virtual void	Delete (Option_t *option="")
	Delete this object.

virtual void	DrawClass () const
	Draw class inheritance tree of the class to which this object belongs.

virtual TObject *	DrawClone (Option_t *option="") const
	Draw a clone of this object in the current selected pad with: `gROOT->SetSelectedPad(c1)`.

virtual void	Dump () const
	Dump contents of object on stdout.

virtual void	Error (const char method, const char msgfmt,...) const
	Issue error message.

virtual void	Execute (const char method, const char params, Int_t *error=nullptr)
	Execute method on this object with the given parameter string, e.g.

virtual void	Execute (TMethod method, TObjArray params, Int_t *error=nullptr)
	Execute method on this object with parameters stored in the TObjArray.

virtual void	Fatal (const char method, const char msgfmt,...) const
	Issue fatal error message.

virtual TObject *	FindObject (const char *name) const
	Must be redefined in derived classes.

virtual TObject *	FindObject (const TObject *obj) const
	Must be redefined in derived classes.

virtual Option_t *	GetDrawOption () const
	Get option used by the graphics system to draw this object.

virtual const char *	GetIconName () const
	Returns mime type name of object.

virtual char *	GetObjectInfo (Int_t px, Int_t py) const
	Returns string containing info about the object at position (px,py).

virtual Option_t *	GetOption () const

virtual UInt_t	GetUniqueID () const
	Return the unique object id.

virtual Bool_t	HandleTimer (TTimer *timer)
	Execute action in response of a timer timing out.

Bool_t	HasInconsistentHash () const
	Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e.

virtual void	Info (const char method, const char msgfmt,...) const
	Issue info message.

virtual Bool_t	InheritsFrom (const char *classname) const
	Returns kTRUE if object inherits from class "classname".

virtual Bool_t	InheritsFrom (const TClass *cl) const
	Returns kTRUE if object inherits from TClass cl.

virtual void	Inspect () const
	Dump contents of this object in a graphics canvas.

void	InvertBit (UInt_t f)

Bool_t	IsDestructed () const
	IsDestructed.

virtual Bool_t	IsEqual (const TObject *obj) const
	Default equal comparison (objects are equal if they have the same address in memory).

virtual Bool_t	IsFolder () const
	Returns kTRUE in case object contains browsable objects (like containers or lists of other objects).

R__ALWAYS_INLINE Bool_t	IsOnHeap () const

R__ALWAYS_INLINE Bool_t	IsZombie () const

void	MayNotUse (const char *method) const
	Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary).

virtual Bool_t	Notify ()
	This method must be overridden to handle object notification (the base implementation is no-op).

void	Obsolete (const char method, const char asOfVers, const char *removedFromVers) const
	Use this method to declare a method obsolete.

void	operator delete (void *ptr)
	Operator delete.

void	operator delete (void ptr, void vp)
	Only called by placement new when throwing an exception.

void	operator delete[] (void *ptr)
	Operator delete [].

void	operator delete[] (void ptr, void vp)
	Only called by placement new[] when throwing an exception.

void *	operator new (size_t sz)

void *	operator new (size_t sz, void *vp)

void *	operator new[] (size_t sz)

void *	operator new[] (size_t sz, void *vp)

TObject &	operator= (const TObject &rhs)
	TObject assignment operator.

virtual void	Pop ()
	Pop on object drawn in a pad to the top of the display list.

virtual Int_t	Read (const char *name)
	Read contents of object with specified name from the current directory.

virtual void	RecursiveRemove (TObject *obj)
	Recursively remove this object from a list.

void	ResetBit (UInt_t f)

virtual void	SaveAs (const char filename="", Option_t option="") const
	Save this object in the file specified by filename.

void	SetBit (UInt_t f)

void	SetBit (UInt_t f, Bool_t set)
	Set or unset the user status bits as specified in f.

virtual void	SetDrawOption (Option_t *option="")
	Set drawing option for object.

virtual void	SetUniqueID (UInt_t uid)
	Set the unique object id.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

virtual void	SysError (const char method, const char msgfmt,...) const
	Issue system error message.

R__ALWAYS_INLINE Bool_t	TestBit (UInt_t f) const

Int_t	TestBits (UInt_t f) const

virtual void	UseCurrentStyle ()
	Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked.

virtual void	Warning (const char method, const char msgfmt,...) const
	Issue warning message.

virtual Int_t	Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0)
	Write this object to the current directory.

virtual Int_t	Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) const
	Write this object to the current directory.

Static Public Member Functions
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

Static Public Member Functions inherited from TGeoBBox
static Bool_t	AreOverlapping (const TGeoBBox box1, const TGeoMatrix mat1, const TGeoBBox box2, const TGeoMatrix mat2) R__DEPRECATED(6
	Check if 2 positioned boxes overlap.

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static Bool_t	Contains (const Double_t point, Double_t dx, Double_t dy, Double_t dz, const Double_t origin)
	Static method to check if point[3] is located inside a box of having dx, dy, dz as half-lengths.

static const char *	DeclFileName ()

static Double_t	DistFromInside (const Double_t point, const Double_t dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big())
	Compute distance from inside point to surface of the box.

static Double_t	DistFromOutside (const Double_t point, const Double_t dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big())
	Compute distance from outside point to surface of the box.

Static Public Member Functions inherited from TGeoShape
static Double_t	Big ()

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static Double_t	ComputeEpsMch ()
	Compute machine round-off double precision error as the smallest number that if added to 1.0 is different than 1.0.

static const char *	DeclFileName ()

static Double_t	DistToPhiMin (const Double_t point, const Double_t dir, Double_t s1, Double_t c1, Double_t s2, Double_t c2, Double_t sm, Double_t cm, Bool_t in=kTRUE)
	compute distance from point (inside phi) to both phi planes. Return minimum.

static Double_t	EpsMch ()
	static function returning the machine round-off error

static TGeoMatrix *	GetTransform ()
	Returns current transformation matrix that applies to shape.

static Bool_t	IsCloseToPhi (Double_t epsil, const Double_t *point, Double_t c1, Double_t s1, Double_t c2, Double_t s2)
	True if point is closer than epsil to one of the phi planes defined by c1,s1 or c2,s2.

static Bool_t	IsCrossingSemiplane (const Double_t point, const Double_t dir, Double_t cphi, Double_t sphi, Double_t &snext, Double_t &rxy)
	Compute distance from POINT to semiplane defined by PHI angle along DIR.

static Bool_t	IsInPhiRange (const Double_t *point, Double_t phi1, Double_t phi2)
	Static method to check if a point is in the phi range (phi1, phi2) [degrees].

static Bool_t	IsSameWithinTolerance (Double_t a, Double_t b)
	Check if two numbers differ with less than a tolerance.

static Bool_t	IsSegCrossing (Double_t x1, Double_t y1, Double_t x2, Double_t y2, Double_t x3, Double_t y3, Double_t x4, Double_t y4)
	Check if segments (A,B) and (C,D) are crossing, where: A(x1,y1), B(x2,y2), C(x3,y3), D(x4,y4)

static void	NormalPhi (const Double_t point, const Double_t dir, Double_t *norm, Double_t c1, Double_t s1, Double_t c2, Double_t s2)
	Static method to compute normal to phi planes.

static Double_t	SafetyPhi (const Double_t *point, Bool_t in, Double_t phi1, Double_t phi2)
	Static method to compute safety w.r.t a phi corner defined by cosines/sines of the angles phi1, phi2.

static Double_t	SafetySeg (Double_t r, Double_t z, Double_t r1, Double_t z1, Double_t r2, Double_t z2, Bool_t outer)
	Compute distance from point of coordinates (r,z) to segment (r1,z1):(r2,z2)

static void	SetTransform (TGeoMatrix *matrix)
	Set current transformation matrix that applies to shape.

static Double_t	Tolerance ()

Static Public Member Functions inherited from TNamed
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

Static Public Member Functions inherited from TObject
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

static Longptr_t	GetDtorOnly ()
	Return destructor only flag.

static Bool_t	GetObjectStat ()
	Get status of object stat flag.

static void	SetDtorOnly (void *obj)
	Set destructor only flag.

static void	SetObjectStat (Bool_t stat)
	Turn on/off tracking of objects in the TObjectTable.

Protected Member Functions
	TGeoPara (const TGeoPara &)=delete

TGeoPara &	operator= (const TGeoPara &)=delete

Protected Member Functions inherited from TGeoBBox
	TGeoBBox (const TGeoBBox &)=delete

void	FillBuffer3D (TBuffer3D &buffer, Int_t reqSections, Bool_t localFrame) const override
	Fills the supplied buffer, with sections in desired frame See TBuffer3D.h for explanation of sections, frame etc.

TGeoBBox &	operator= (const TGeoBBox &)=delete

Protected Member Functions inherited from TGeoShape
Int_t	GetBasicColor () const
	Get the basic color (0-7).

void	SetOnBoundary (Bool_t)

void	TransformPoints (Double_t *points, UInt_t NbPoints) const
	Tranform a set of points (LocalToMaster)

Protected Member Functions inherited from TObject
virtual void	DoError (int level, const char location, const char fmt, va_list va) const
	Interface to ErrorHandler (protected).

void	MakeZombie ()

Protected Attributes
Double_t	fAlpha

Double_t	fPhi

Double_t	fTheta

Double_t	fTxy

Double_t	fTxz

Double_t	fTyz

Double_t	fX

Double_t	fY

Double_t	fZ

Protected Attributes inherited from TGeoBBox
Double_t	fDX

Double_t	fDY

Double_t	fDZ

Double_t	fOrigin [3]

Protected Attributes inherited from TGeoShape
UInt_t	fShapeBits

Int_t	fShapeId

Protected Attributes inherited from TNamed
TString	fName

TString	fTitle

Additional Inherited Members
Public Types inherited from TGeoShape
enum	EShapeType { kBitMask32 = 0xffffffff , kGeoNoShape = 0 , kGeoBad = (1ULL << ( 0 )) , kGeoRSeg = (1ULL << ( 1 )) , kGeoPhiSeg = (1ULL << ( 2 )) , kGeoThetaSeg = (1ULL << ( 3 )) , kGeoVisX = (1ULL << ( 4 )) , kGeoVisY = (1ULL << ( 5 )) , kGeoVisZ = (1ULL << ( 6 )) , kGeoRunTimeShape = (1ULL << ( 7 )) , kGeoInvalidShape = (1ULL << ( 8 )) , kGeoTorus = (1ULL << ( 9 )) , kGeoBox = (1ULL << ( 10 )) , kGeoPara = (1ULL << ( 11 )) , kGeoSph = (1ULL << ( 12 )) , kGeoTube = (1ULL << ( 13 )) , kGeoTubeSeg = (1ULL << ( 14 )) , kGeoCone = (1ULL << ( 15 )) , kGeoConeSeg = (1ULL << ( 16 )) , kGeoPcon = (1ULL << ( 17 )) , kGeoPgon = (1ULL << ( 18 )) , kGeoArb8 = (1ULL << ( 19 )) , kGeoEltu = (1ULL << ( 20 )) , kGeoTrap = (1ULL << ( 21 )) , kGeoCtub = (1ULL << ( 22 )) , kGeoTrd1 = (1ULL << ( 23 )) , kGeoTrd2 = (1ULL << ( 24 )) , kGeoComb = (1ULL << ( 25 )) , kGeoClosedShape = (1ULL << ( 26 )) , kGeoXtru = (1ULL << ( 27 )) , kGeoParaboloid = (1ULL << ( 28 )) , kGeoHalfSpace = (1ULL << ( 29 )) , kGeoHype = (1ULL << ( 30 )) , kGeoSavePrimitive = (1ULL << ( 20 )) }

Public Types inherited from TObject
enum	{ kIsOnHeap = 0x01000000 , kNotDeleted = 0x02000000 , kZombie = 0x04000000 , kInconsistent = 0x08000000 , kBitMask = 0x00ffffff }

enum	{ kSingleKey = (1ULL << ( 0 )) , kOverwrite = (1ULL << ( 1 )) , kWriteDelete = (1ULL << ( 2 )) }

enum	EDeprecatedStatusBits { kObjInCanvas = (1ULL << ( 3 )) }

enum	EStatusBits { kCanDelete = (1ULL << ( 0 )) , kMustCleanup = (1ULL << ( 3 )) , kIsReferenced = (1ULL << ( 4 )) , kHasUUID = (1ULL << ( 5 )) , kCannotPick = (1ULL << ( 6 )) , kNoContextMenu = (1ULL << ( 8 )) , kInvalidObject = (1ULL << ( 13 )) }

Public Attributes inherited from TGeoBBox
static Bool_t DO NOT USE !The overlap detection does not work for all	cases

static Bool_t	DEPRECATED

Protected Types inherited from TObject
enum	{ kOnlyPrepStep = (1ULL << ( 3 )) }

#include <TGeoPara.h>

Inheritance diagram for TGeoPara:

[legend]

Constructor & Destructor Documentation

◆ TGeoPara() [1/5]

TGeoPara::TGeoPara ( const TGeoPara & )

protecteddelete

◆ TGeoPara() [2/5]

TGeoPara::TGeoPara ( )

Default constructor.

Definition at line 72 of file TGeoPara.cxx.

◆ TGeoPara() [3/5]

TGeoPara::TGeoPara	(	Double_t	dx,
		Double_t	dy,
		Double_t	dz,
		Double_t	alpha,
		Double_t	theta,
		Double_t	phi
	)

Default constructor specifying minimum and maximum radius.

Definition at line 87 of file TGeoPara.cxx.

◆ TGeoPara() [4/5]

TGeoPara::TGeoPara	(	const char *	name,
		Double_t	dx,
		Double_t	dy,
		Double_t	dz,
		Double_t	alpha,
		Double_t	theta,
		Double_t	phi
	)

Default constructor specifying minimum and maximum radius.

Definition at line 112 of file TGeoPara.cxx.

◆ TGeoPara() [5/5]

TGeoPara::TGeoPara ( Double_t * param )

Default constructor.

param[0] = dx
param[1] = dy
param[2] = dz
param[3] = alpha
param[4] = theta
param[5] = phi

Definition at line 144 of file TGeoPara.cxx.

◆ ~TGeoPara()

TGeoPara::~TGeoPara ( )

override

destructor

Definition at line 157 of file TGeoPara.cxx.

Member Function Documentation

◆ Capacity()

Double_t TGeoPara::Capacity ( ) const

overridevirtual

Computes capacity of the shape in [length^3].

Reimplemented from TGeoBBox.

Definition at line 162 of file TGeoPara.cxx.

◆ Class()

static TClass * TGeoPara::Class ( )

static

Returns: TClass describing this class

◆ Class_Name()

static const char * TGeoPara::Class_Name ( )

static

Returns: Name of this class

◆ Class_Version()

static constexpr Version_t TGeoPara::Class_Version ( )

inlinestaticconstexpr

Returns: Version of this class

Definition at line 85 of file TGeoPara.h.

◆ ComputeBBox()

void TGeoPara::ComputeBBox ( )

overridevirtual

compute bounding box

Reimplemented from TGeoBBox.

Definition at line 171 of file TGeoPara.cxx.

◆ ComputeNormal()

void TGeoPara::ComputeNormal	(	const Double_t *	point,
		const Double_t *	dir,
		Double_t *	norm
	)

overridevirtual

Compute normal to closest surface from POINT.

Reimplemented from TGeoBBox.

Definition at line 183 of file TGeoPara.cxx.

◆ ComputeNormal_v()

void TGeoPara::ComputeNormal_v	(	const Double_t *	points,
		const Double_t *	dirs,
		Double_t *	norms,
		Int_t	vecsize
	)

overridevirtual

Compute the normal for an array o points so that norm.dot.dir is positive Input: Arrays of point coordinates and directions + vector size Output: Array of normal directions.

Reimplemented from TGeoBBox.

Definition at line 748 of file TGeoPara.cxx.

◆ Contains()

Bool_t TGeoPara::Contains ( const Double_t * point ) const

overridevirtual

test if point is inside this sphere test Z range

Reimplemented from TGeoBBox.

Definition at line 227 of file TGeoPara.cxx.

◆ Contains_v()

void TGeoPara::Contains_v	(	const Double_t *	points,
		Bool_t *	inside,
		Int_t	vecsize
	)		const

overridevirtual

Check the inside status for each of the points in the array.

Input: Array of point coordinates + vector size Output: Array of Booleans for the inside of each point

Reimplemented from TGeoBBox.

Definition at line 737 of file TGeoPara.cxx.

◆ DeclFileName()

static const char * TGeoPara::DeclFileName ( )

inlinestatic

Returns: Name of the file containing the class declaration

Definition at line 85 of file TGeoPara.h.

◆ DistFromInside()

Double_t TGeoPara::DistFromInside	(	const Double_t *	point,
		const Double_t *	dir,
		Int_t	iact = `1`,
		Double_t	step = `TGeoShape::Big()`,
		Double_t *	safe = `nullptr`
	)		const

overridevirtual

compute distance from inside point to surface of the para Boundary safe algorithm.

Reimplemented from TGeoBBox.

Definition at line 246 of file TGeoPara.cxx.

◆ DistFromInside_v()

void TGeoPara::DistFromInside_v	(	const Double_t *	points,
		const Double_t *	dirs,
		Double_t *	dists,
		Int_t	vecsize,
		Double_t *	step
	)		const

overridevirtual

Compute distance from array of input points having directions specified by dirs. Store output in dists.

Reimplemented from TGeoBBox.

Definition at line 757 of file TGeoPara.cxx.

◆ DistFromOutside()

Double_t TGeoPara::DistFromOutside	(	const Double_t *	point,
		const Double_t *	dir,
		Int_t	iact = `1`,
		Double_t	step = `TGeoShape::Big()`,
		Double_t *	safe = `nullptr`
	)		const

overridevirtual

compute distance from inside point to surface of the para

Reimplemented from TGeoBBox.

Definition at line 299 of file TGeoPara.cxx.

◆ DistFromOutside_v()

void TGeoPara::DistFromOutside_v	(	const Double_t *	points,
		const Double_t *	dirs,
		Double_t *	dists,
		Int_t	vecsize,
		Double_t *	step
	)		const

overridevirtual

Compute distance from array of input points having directions specified by dirs. Store output in dists.

Reimplemented from TGeoBBox.

Definition at line 767 of file TGeoPara.cxx.

◆ Divide()

TGeoVolume * TGeoPara::Divide	(	TGeoVolume *	voldiv,
		const char *	divname,
		Int_t	iaxis,
		Int_t	ndiv,
		Double_t	start,
		Double_t	step
	)

overridevirtual

Divide this parallelepiped shape belonging to volume "voldiv" into ndiv equal volumes called divname, from start position with the given step.

Returns pointer to created division cell volume. In case a wrong division axis is supplied, returns pointer to volume to be divided.

Reimplemented from TGeoBBox.

Definition at line 394 of file TGeoPara.cxx.

◆ GetAlpha()

Double_t TGeoPara::GetAlpha ( ) const

inline

Definition at line 69 of file TGeoPara.h.

◆ GetAxisRange()

Double_t TGeoPara::GetAxisRange	(	Int_t	iaxis,
		Double_t &	xlo,
		Double_t &	xhi
	)		const

overridevirtual

Get range of shape for a given axis.

Reimplemented from TGeoBBox.

Definition at line 435 of file TGeoPara.cxx.

◆ GetBoundingCylinder()

void TGeoPara::GetBoundingCylinder ( Double_t * param ) const

overridevirtual

Fill vector param[4] with the bounding cylinder parameters.

The order is the following : Rmin, Rmax, Phi1, Phi2

Reimplemented from TGeoBBox.

Definition at line 464 of file TGeoPara.cxx.

◆ GetByteCount()

Int_t TGeoPara::GetByteCount ( ) const

inlineoverridevirtual

Reimplemented from TGeoBBox.

Definition at line 61 of file TGeoPara.h.

◆ GetFittingBox()

Int_t TGeoPara::GetFittingBox	(	const TGeoBBox *	parambox,
		TGeoMatrix *	mat,
		Double_t &	dx,
		Double_t &	dy,
		Double_t &	dz
	)		const

overridevirtual

Fills real parameters of a positioned box inside this. Returns 0 if successful.

Reimplemented from TGeoBBox.

Definition at line 472 of file TGeoPara.cxx.

◆ GetMakeRuntimeShape()

TGeoShape * TGeoPara::GetMakeRuntimeShape	(	TGeoShape *	mother,
		TGeoMatrix *	mat
	)		const

overridevirtual

in case shape has some negative parameters, these has to be computed in order to fit the mother

Reimplemented from TGeoBBox.

Definition at line 547 of file TGeoPara.cxx.

◆ GetNmeshVertices()

Int_t TGeoPara::GetNmeshVertices ( ) const

inlineoverridevirtual

Reimplemented from TGeoBBox.

Definition at line 65 of file TGeoPara.h.

◆ GetPhi()

Double_t TGeoPara::GetPhi ( ) const

inline

Definition at line 71 of file TGeoPara.h.

◆ GetTheta()

Double_t TGeoPara::GetTheta ( ) const

inline

Definition at line 70 of file TGeoPara.h.

◆ GetTxy()

Double_t TGeoPara::GetTxy ( ) const

inline

Definition at line 72 of file TGeoPara.h.

◆ GetTxz()

Double_t TGeoPara::GetTxz ( ) const

inline

Definition at line 73 of file TGeoPara.h.

◆ GetTyz()

Double_t TGeoPara::GetTyz ( ) const

inline

Definition at line 74 of file TGeoPara.h.

◆ GetX()

Double_t TGeoPara::GetX ( ) const

inline

Definition at line 66 of file TGeoPara.h.

◆ GetY()

Double_t TGeoPara::GetY ( ) const

inline

Definition at line 67 of file TGeoPara.h.

◆ GetZ()

Double_t TGeoPara::GetZ ( ) const

inline

Definition at line 68 of file TGeoPara.h.

◆ InspectShape()

void TGeoPara::InspectShape ( ) const

overridevirtual

print shape parameters

Reimplemented from TGeoBBox.

Definition at line 574 of file TGeoPara.cxx.

◆ IsA()

TClass * TGeoPara::IsA ( ) const

inlineoverridevirtual

Returns: TClass describing current object

Reimplemented from TGeoBBox.

Definition at line 85 of file TGeoPara.h.

◆ IsCylType()

Bool_t TGeoPara::IsCylType ( ) const

inlineoverridevirtual

Reimplemented from TGeoBBox.

Definition at line 76 of file TGeoPara.h.

◆ operator=()

TGeoPara & TGeoPara::operator= ( const TGeoPara & )

protecteddelete

◆ Safety()

Double_t TGeoPara::Safety	(	const Double_t *	point,
		Bool_t	in = `kTRUE`
	)		const

overridevirtual

computes the closest distance from given point to this shape, according to option.

The matching point on the shape is stored in spoint.

Reimplemented from TGeoBBox.

Definition at line 591 of file TGeoPara.cxx.

◆ Safety_v()

void TGeoPara::Safety_v	(	const Double_t *	points,
		const Bool_t *	inside,
		Double_t *	safe,
		Int_t	vecsize
	)		const

overridevirtual

Compute safe distance from each of the points in the input array.

Input: Array of point coordinates, array of statuses for these points, size of the arrays Output: Safety values

Reimplemented from TGeoBBox.

Definition at line 779 of file TGeoPara.cxx.

◆ SavePrimitive()

void TGeoPara::SavePrimitive	(	std::ostream &	out,
		Option_t *	option = `""`
	)

overridevirtual

Save a primitive as a C++ statement(s) on output stream "out".

Reimplemented from TGeoBBox.

Definition at line 618 of file TGeoPara.cxx.

◆ SetDimensions()

void TGeoPara::SetDimensions ( Double_t * param )

overridevirtual

Set dimensions starting from an array.

Reimplemented from TGeoBBox.

Definition at line 637 of file TGeoPara.cxx.

◆ SetPoints() [1/2]

void TGeoPara::SetPoints ( Double_t * points ) const

overridevirtual

Create PARA mesh points.

Reimplemented from TGeoBBox.

Definition at line 655 of file TGeoPara.cxx.

◆ SetPoints() [2/2]

void TGeoPara::SetPoints ( Float_t * points ) const

overridevirtual

create sphere mesh points

Reimplemented from TGeoBBox.

Definition at line 691 of file TGeoPara.cxx.

◆ Sizeof3D()

void TGeoPara::Sizeof3D ( ) const

overridevirtual

fill size of this 3-D object

Reimplemented from TGeoBBox.

Definition at line 727 of file TGeoPara.cxx.

◆ Streamer()

void TGeoPara::Streamer ( TBuffer & R__b )

overridevirtual

Stream an object of class TObject.

Reimplemented from TGeoBBox.

◆ StreamerNVirtual()

void TGeoPara::StreamerNVirtual ( TBuffer & ClassDef_StreamerNVirtual_b )

inline

Definition at line 85 of file TGeoPara.h.

Member Data Documentation

◆ fAlpha

Double_t TGeoPara::fAlpha

protected

Definition at line 23 of file TGeoPara.h.

◆ fPhi

Double_t TGeoPara::fPhi

protected

Definition at line 25 of file TGeoPara.h.

◆ fTheta

Double_t TGeoPara::fTheta

protected

Definition at line 24 of file TGeoPara.h.

◆ fTxy

Double_t TGeoPara::fTxy

protected

Definition at line 26 of file TGeoPara.h.

◆ fTxz

Double_t TGeoPara::fTxz

protected

Definition at line 27 of file TGeoPara.h.

◆ fTyz

Double_t TGeoPara::fTyz

protected

Definition at line 28 of file TGeoPara.h.

◆ fX

Double_t TGeoPara::fX

protected

Definition at line 20 of file TGeoPara.h.

◆ fY

Double_t TGeoPara::fY

protected

Definition at line 21 of file TGeoPara.h.

◆ fZ

Double_t TGeoPara::fZ

protected

Definition at line 22 of file TGeoPara.h.

Libraries for TGeoPara:

[legend]

The documentation for this class was generated from the following files:

geom/geom/inc/TGeoPara.h
geom/geom/src/TGeoPara.cxx

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Constructor & Destructor Documentation

◆ TGeoPara() [1/5]

◆ TGeoPara() [2/5]

◆ TGeoPara() [3/5]

◆ TGeoPara() [4/5]

◆ TGeoPara() [5/5]

◆ ~TGeoPara()

Member Function Documentation

◆ Capacity()

◆ Class()

◆ Class_Name()

◆ Class_Version()

◆ ComputeBBox()

◆ ComputeNormal()

◆ ComputeNormal_v()

◆ Contains()

◆ Contains_v()

◆ DeclFileName()

◆ DistFromInside()

◆ DistFromInside_v()

◆ DistFromOutside()

◆ DistFromOutside_v()

◆ Divide()

◆ GetAlpha()

◆ GetAxisRange()

◆ GetBoundingCylinder()

◆ GetByteCount()

◆ GetFittingBox()

◆ GetMakeRuntimeShape()

◆ GetNmeshVertices()

◆ GetPhi()

◆ GetTheta()

◆ GetTxy()

◆ GetTxz()

◆ GetTyz()

◆ GetX()

◆ GetY()

◆ GetZ()

◆ InspectShape()

◆ IsA()

◆ IsCylType()

◆ operator=()

◆ Safety()

◆ Safety_v()

◆ SavePrimitive()

◆ SetDimensions()

◆ SetPoints() [1/2]

◆ SetPoints() [2/2]

◆ Sizeof3D()

◆ Streamer()

◆ StreamerNVirtual()

Member Data Documentation

◆ fAlpha

◆ fPhi

◆ fTheta

◆ fTxy

◆ fTxz

◆ fTyz

◆ fX

◆ fY

◆ fZ