Represents web window, which can be shown in web browser or any other supported environment.

Window can be configured to run either in the normal or in the batch (headless) mode. In second case no any graphical elements will be created. For the normal window one can configure geometry (width and height), which are applied when window shown.

Each window can be shown several times (if allowed) in different places - either as the CEF (chromium embedded) window or in the standard web browser. When started, window will open and show HTML page, configured with RWebWindow::SetDefaultPage() method.

Typically (but not necessarily) clients open web socket connection to the window and one can exchange data, using RWebWindow::Send() method and call-back function assigned via RWebWindow::SetDataCallBack().

Definition at line 52 of file RWebWindow.hxx.

Classes
struct	MasterConn

struct	QueueEntry

struct	QueueItem

struct	WebConn

Public Member Functions
	RWebWindow ()
	RWebWindow constructor Should be defined here because of std::unique_ptr<RWebWindowWSHandler>

	~RWebWindow ()
	RWebWindow destructor Closes all connections and remove window from manager.

void	AssignThreadId ()
	Assign thread id which has to be used for callbacks WARNING!!! only for expert use Automatically done at the moment when any callback function is invoked Can be invoked once again if window Run method will be invoked from other thread Normally should be invoked before Show() method is called.

bool	CanSend (unsigned connid, bool direct=true) const
	Returns true if sending via specified connection can be performed.

void	CloseConnection (unsigned connid)
	Close specified connection.

void	CloseConnections ()
	Closes all connection to clients Normally leads to closing of all correspondent browser windows Some browsers (like firefox) do not allow by default to close window.

std::string	GetAddr () const
	Returns window address which is used in URL.

std::string	GetClientVersion () const
	Returns current client version.

unsigned	GetConnectionId (int num=0) const
	Returns connection id for specified connection sequence number Only active connections are returned - where clients confirms connection Total number of connections can be retrieved with NumConnections() method.

std::vector< unsigned >	GetConnections (unsigned excludeid=0) const
	returns vector with all existing connections ids One also can exclude specified connection from return result, which can be useful to be able reply too all but this connections

unsigned	GetConnLimit () const
	returns configured connections limit (0 - default)

unsigned	GetDisplayConnection () const
	Returns first connection id where window is displayed It could be that connection(s) not yet fully established - but also not timed out Batch jobs will be ignored here Returns 0 if connection not exists.

unsigned	GetHeight () const
	returns configured window height (0 - default)

unsigned	GetId () const
	Returns ID for the window - unique inside window manager.

std::shared_ptr< RWebWindowsManager >	GetManager () const
	Returns window manager.

unsigned	GetMaxQueueLength () const
	Return maximal queue length of data which can be held by window.

float	GetOperationTmout () const
	Returns timeout for synchronous WebWindow operations.

std::string	GetRelativeAddr (const RWebWindow &win) const
	Returns relative URL address for the specified window Address can be required if one needs to access data from one window into another window Used for instance when inserting panel into canvas.

std::string	GetRelativeAddr (const std::shared_ptr< RWebWindow > &win) const
	Returns relative URL address for the specified window Address can be required if one needs to access data from one window into another window Used for instance when inserting panel into canvas.

int	GetSendQueueLength (unsigned connid) const
	Returns send queue length for specified connection.

THttpServer *	GetServer ()
	Return THttpServer instance serving requests to the window.

std::string	GetUrl (bool remote=true)
	Return URL string to access web window.

std::string	GetUserArgs () const
	Returns configured user arguments for web window See SetUserArgs method for more details.

unsigned	GetWidth () const
	returns configured window width (0 - default) actual window width can be different

int	GetX () const
	returns configured window X position (-1 - default)

int	GetY () const
	returns configured window Y position (-1 - default)

bool	HasConnection (unsigned connid=0, bool only_active=true) const
	returns true if specified connection id exists

bool	IsNativeOnlyConn () const
	returns true if only native (own-created) connections are allowed

bool	IsShown () const
	Returns true when window was shown at least once.

int	NumConnections (bool with_pending=false) const
	Returns current number of active clients connections.

void	RecordData (const std::string &fname="protocol.json", const std::string &fprefix="")
	Configures recording of communication data in protocol file Provided filename will be used to store JSON array with names of written files - text or binary If data was send from client, "send" entry will be placed.

void	Run (double tm=0.)
	Run window functionality for specified time If no action can be performed - just sleep specified time.

void	Send (unsigned connid, const std::string &data)
	Sends data to specified connection.

void	SendBinary (unsigned connid, const void *data, std::size_t len)
	Send binary data to specified connection.

void	SendBinary (unsigned connid, std::string &&data)
	Send binary data to specified connection.

void	SetCallBacks (WebWindowConnectCallback_t conn, WebWindowDataCallback_t data, WebWindowConnectCallback_t disconn=nullptr)
	Set call-backs function for connect, data and disconnect events.

void	SetClearOnClose (const std::shared_ptr< void > &handle=nullptr)
	Set handle which is cleared when last active connection is closed Typically can be used to destroy web-based widget at such moment.

void	SetClientVersion (const std::string &vers)
	Set client version, used as prefix in scripts URL When changed, web browser will reload all related JS files while full URL will be different Default is empty value - no extra string in URL Version should be string like "1.2" or "ver1.subv2" and not contain any special symbols.

void	SetConnectCallBack (WebWindowConnectCallback_t func)
	Set call-back function for new connection.

void	SetConnLimit (unsigned lmt=0)
	Configure maximal number of allowed connections - 0 is unlimited Will not affect already existing connections Default is 1 - the only client is allowed.

void	SetConnToken (const std::string &token="")
	Configures connection token (default none) When specified, in URL of webpage such token should be provided as &token=value parameter, otherwise web window will refuse connection.

void	SetDataCallBack (WebWindowDataCallback_t func)
	Set call-back function for data, received from the clients via websocket.

void	SetDefaultPage (const std::string &page)
	Set content of default window HTML page This page returns when URL address of the window will be requested Either HTML code or file name in the form "file:/home/user/data/file.htm" One also can using default locations like "file:rootui5sys/canv/canvas.html".

void	SetDisconnectCallBack (WebWindowConnectCallback_t func)
	Set call-back function for disconnecting.

void	SetGeometry (unsigned width, unsigned height)
	Set window geometry. Will be applied if supported by used web display (like CEF or Chromium)

void	SetMaxQueueLength (unsigned len=10)
	configures maximal queue length of data which can be held by window

void	SetNativeOnlyConn (bool on=true)
	configures that only native (own-created) connections are allowed

void	SetOperationTmout (float tm=50.)
	Set timeout for synchronous WebWindow operations.

void	SetPanelName (const std::string &name)
	Configure window to show some of existing JSROOT panels It uses "file:rootui5sys/panel/panel.html" as default HTML page At the moment only FitPanel is existing.

void	SetPosition (unsigned x, unsigned y)
	Set window position. Will be applied if supported by used web display (like CEF or Chromium)

void	SetUserArgs (const std::string &args)
	Set arbitrary JSON data, which is accessible via conn.getUserArgs() method in JavaScript This JSON code injected into main HTML document into connectWebWindow({}) Must be set before RWebWindow::Show() method is called.

unsigned	Show (const RWebDisplayArgs &args="")
	Show window in specified location.

void	StartThread ()
	Start special thread which will be used by the window to handle all callbacks One has to be sure, that access to global ROOT structures are minimized and protected with ROOT::EnableThreadSafety(); call.

void	StopThread ()
	Stop special thread.

void	Sync ()
	Special method to process all internal activity when window runs in separate thread.

void	TerminateROOT ()
	Terminate ROOT session Tries to correctly close THttpServer, associated with RWebWindowsManager After that exit from process.

void	UseServerThreads ()
	Let use THttpServer threads to process requests WARNING!!! only for expert use Should be only used when application provides proper locking and does not block.

int	WaitFor (WebWindowWaitFunc_t check)
	Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

int	WaitForTimed (WebWindowWaitFunc_t check)
	Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

int	WaitForTimed (WebWindowWaitFunc_t check, double duration)
	Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

Static Public Member Functions
static std::shared_ptr< RWebWindow >	Create ()
	Create new RWebWindow Using default RWebWindowsManager.

static bool	EmbedFileDialog (const std::shared_ptr< RWebWindow > &window, unsigned connid, const std::string &args)
	Create dialog instance to use as embedded dialog inside provided widget Loads libROOTBrowserv7 and tries to call RFileDialog::Embedded() method Embedded dialog started on the client side where FileDialogController.SaveAs() method called Such method immediately send message with "FILEDIALOG:" prefix On the server side widget should detect such message and call RFileDialog::Embedded() providing received string as second argument.

static bool	IsFileDialogMessage (const std::string &msg)
	Check if this could be the message send by client to start new file dialog If returns true, one can call RWebWindow::EmbedFileDialog() to really create file dialog instance inside existing widget.

static unsigned	ShowWindow (std::shared_ptr< RWebWindow > window, const RWebDisplayArgs &args="")
	Static method to show web window Has to be used instead of RWebWindow::Show() when window potentially can be embed into other windows Soon RWebWindow::Show() method will be done protected.

Private Types
using	ConnectionsList_t = std::vector< std::shared_ptr< WebConn > >

enum	EQueueEntryKind { kind_None , kind_Connect , kind_Data , kind_Disconnect }

using	timestamp_t = std::chrono::time_point< std::chrono::system_clock >

Private Member Functions
std::shared_ptr< WebConn >	_FindConnWithKey (const std::string &key) const
	Find connection with specified key.

std::string	_MakeSendHeader (std::shared_ptr< WebConn > &conn, bool txt, const std::string &data, int chid)
	Internal method to prepare text part of send data Should be called under locked connection mutex.

unsigned	AddDisplayHandle (bool headless_mode, const std::string &key, std::unique_ptr< RWebDisplayHandle > &handle)
	Add display handle and associated key Key is random number generated when starting new window When client is connected, key should be supplied to correctly identify it.

unsigned	AddEmbedWindow (std::shared_ptr< RWebWindow > window, unsigned connid, int channel)
	Add embed window.

void	AddMasterConnection (std::shared_ptr< RWebWindow > window, unsigned connid, int channel)
	Add new master connection If there are many connections - only same master is allowed.

void	CheckDataToSend (bool only_once=false)
	Checks if new data can be send (internal use only) If necessary, provide credits to the client.

bool	CheckDataToSend (std::shared_ptr< WebConn > &conn)
	Checks if one should send data for specified connection Returns true when send operation was performed.

void	CheckInactiveConnections ()
	Check if there are connection which are inactive for longer time For instance, batch browser will be stopped if no activity for 30 sec is there.

void	CheckPendingConnections ()
	Check if started process(es) establish connection.

void	CompleteWSSend (unsigned wsid)
	Complete websocket send operation Clear "doing send" flag and check if next operation has to be started.

std::shared_ptr< RWebWindowWSHandler >	CreateWSHandler (std::shared_ptr< RWebWindowsManager > mgr, unsigned id, double tmout)
	Assigns manager reference, window id and creates websocket handler, used for communication with the clients.

std::shared_ptr< WebConn >	FindConnection (unsigned wsid)
	Find connection with specified websocket id.

unsigned	FindHeadlessConnection ()
	Returns connection id of window running in headless mode This can be special connection which may run picture production jobs in background Connection to that job may not be initialized yet If connection does not exists, returns 0.

std::shared_ptr< WebConn >	FindOrCreateConnection (unsigned wsid, bool make_new, const char *query)
	Find connection with given websocket id.

std::string	GenerateKey () const
	Generate new unique key for the window.

std::string	GetConnToken () const
	Returns configured connection token.

std::vector< MasterConn >	GetMasterConnections (unsigned connid=0) const
	Get list of master connections.

ConnectionsList_t	GetWindowConnections (unsigned connid=0, bool only_active=false) const
	returns connection list (or all active connections)

bool	HasKey (const std::string &key) const
	Returns true if provided key value already exists (in processes map or in existing connections)

void	InvokeCallbacks (bool force=false)
	Invoke callbacks with existing data Must be called from appropriate thread.

unsigned	MakeHeadless (bool create_new=false)
	Start headless browser for specified window Normally only single instance is used, but many can be created See ROOT::RWebWindowsManager::Show() docu for more info returns (future) connection id (or 0 when fails)

bool	ProcessBatchHolder (std::shared_ptr< THttpCallArg > &arg)
	Process special http request, used to hold headless browser running Such requests should not be replied for the long time Be aware that function called directly from THttpServer thread, which is not same thread as window.

bool	ProcessWS (THttpCallArg &arg)
	Processing of websockets call-backs, invoked from RWebWindowWSHandler Method invoked from http server thread, therefore appropriate mutex must be used on all relevant data.

void	ProvideQueueEntry (unsigned connid, EQueueEntryKind kind, std::string &&arg)
	Provide data to user callback User callback must be executed in the window thread.

std::shared_ptr< WebConn >	RemoveConnection (unsigned wsid)
	Remove connection with given websocket id.

void	RemoveEmbedWindow (unsigned connid, int channel)
	Remove RWebWindow associated with the channelfEmbed.

void	RemoveMasterConnection (unsigned connid=0)
	Remove master connection - if any.

void	SubmitData (unsigned connid, bool txt, std::string &&data, int chid=1)
	Internal method to send data.

Static Private Member Functions
static void	SetStartDialogFunc (std::function< bool(const std::shared_ptr< RWebWindow > &, unsigned, const std::string &)>)
	Configure func which has to be used for starting dialog.

Private Attributes
std::thread::id	fCallbacksThrdId
	! thread id where callbacks should be invoked

bool	fCallbacksThrdIdSet {false}
	! flag indicating that thread id is assigned

std::shared_ptr< void >	fClearOnClose
	! entry which is cleared when last connection is closed

std::string	fClientVersion
	! configured client version, used as prefix in scripts URL

ConnectionsList_t	fConn
	! list of all accepted connections

WebWindowConnectCallback_t	fConnCallback
	! callback for connect event

unsigned	fConnCnt {0}
	! counter of new connections to assign ids

unsigned	fConnLimit {1}
	! number of allowed active connections

std::mutex	fConnMutex
	! mutex used to protect connection list

std::string	fConnToken
	! value of "token" URL parameter which should be provided for connecting window

WebWindowDataCallback_t	fDataCallback
	! main callback when data over channel 1 is arrived

std::string	fDefaultPage
	! HTML page (or file name) returned when window URL is opened

WebWindowConnectCallback_t	fDisconnCallback
	! callback for disconnect event

bool	fHasWindowThrd {false}
	! indicate if special window thread was started

unsigned	fHeight {0}
	! initial window width and height when displayed, zeros are ignored

unsigned	fId {0}
	! unique identifier

std::queue< QueueEntry >	fInputQueue
	! input queue for all callbacks

std::mutex	fInputQueueMutex
	! mutex to protect input queue

std::shared_ptr< RWebWindow >	fMaster
	! master window where this window is embedded

std::vector< MasterConn >	fMasterConns
	! master connections

unsigned	fMaxQueueLength {10}
	! maximal number of queue entries

std::shared_ptr< RWebWindowsManager >	fMgr
	! display manager

bool	fNativeOnlyConn {false}
	! only native connection are allowed, created by Show() method

float	fOperationTmout {50.}
	! timeout in seconds to perform synchronous operation, default 50s

std::string	fPanelName
	! panel name which should be shown in the window

ConnectionsList_t	fPendingConn
	! list of pending connection with pre-assigned keys

bool	fProcessMT {false}
	! if window event processing performed in dedicated thread

std::string	fProtocol
	! protocol

int	fProtocolCnt {-1}
	! counter for protocol recording

unsigned	fProtocolConnId {0}
	! connection id, which is used for writing protocol

std::string	fProtocolFileName
	! local file where communication protocol will be written

std::string	fProtocolPrefix
	! prefix for created files names

bool	fSendMT {false}
	! true is special threads should be used for sending data

bool	fUseProcessEvents {false}
	! all window functionality will run through process events

std::string	fUserArgs
	! arbitrary JSON code, which is accessible via conn.getUserArgs() method

bool	fUseServerThreads {false}
	! indicates that server thread is using, no special window thread

unsigned	fWidth {0}

std::thread	fWindowThrd
	! special thread for that window

std::shared_ptr< RWebWindowWSHandler >	fWSHandler
	! specialize websocket handler for all incoming connections

int	fX {-1}

int	fY {-1}
	! initial window position, -1 ignored

Static Private Attributes
static std::function< bool(const std::shared_ptr< RWebWindow > &, unsigned, const std::string &)>	gStartDialogFunc = nullptr

Friends
class	RFileDialog

class	RWebDisplayHandle

class	RWebWindowsManager

class	RWebWindowWSHandler

#include <ROOT/RWebWindow.hxx>

Member Typedef Documentation

◆ ConnectionsList_t

using ROOT::RWebWindow::ConnectionsList_t = std::vector<std::shared_ptr<WebConn> >

private

Definition at line 129 of file RWebWindow.hxx.

◆ timestamp_t

using ROOT::RWebWindow::timestamp_t = std::chrono::time_point<std::chrono::system_clock>

private

Definition at line 60 of file RWebWindow.hxx.

Member Enumeration Documentation

◆ EQueueEntryKind

enum ROOT::RWebWindow::EQueueEntryKind

private

Enumerator
kind_None
kind_Connect
kind_Data
kind_Disconnect

Definition at line 119 of file RWebWindow.hxx.

Constructor & Destructor Documentation

◆ RWebWindow()

RWebWindow::RWebWindow ( )

default

RWebWindow constructor Should be defined here because of std::unique_ptr<RWebWindowWSHandler>

◆ ~RWebWindow()

RWebWindow::~RWebWindow ( )

RWebWindow destructor Closes all connections and remove window from manager.

Definition at line 78 of file RWebWindow.cxx.

Member Function Documentation

◆ _FindConnWithKey()

std::shared_ptr< RWebWindow::WebConn > RWebWindow::_FindConnWithKey ( const std::string & key ) const

private

Find connection with specified key.

Must be used under connection mutex lock

Definition at line 516 of file RWebWindow.cxx.

◆ _MakeSendHeader()

std::string RWebWindow::_MakeSendHeader	(	std::shared_ptr< WebConn > &	conn,
		bool	txt,
		const std::string &	data,
		int	chid
	)

private

Internal method to prepare text part of send data Should be called under locked connection mutex.

Definition at line 948 of file RWebWindow.cxx.

◆ AddDisplayHandle()

unsigned RWebWindow::AddDisplayHandle	(	bool	headless_mode,
		const std::string &	key,
		std::unique_ptr< RWebDisplayHandle > &	handle
	)

private

Add display handle and associated key Key is random number generated when starting new window When client is connected, key should be supplied to correctly identify it.

Definition at line 499 of file RWebWindow.cxx.

◆ AddEmbedWindow()

unsigned RWebWindow::AddEmbedWindow	(	std::shared_ptr< RWebWindow >	window,
		unsigned	connid,
		int	channel
	)

private

Add embed window.

Definition at line 1673 of file RWebWindow.cxx.

◆ AddMasterConnection()

void RWebWindow::AddMasterConnection	(	std::shared_ptr< RWebWindow >	window,
		unsigned	connid,
		int	channel
	)

private

Add new master connection If there are many connections - only same master is allowed.

Definition at line 327 of file RWebWindow.cxx.

◆ AssignThreadId()

void RWebWindow::AssignThreadId ( )

Assign thread id which has to be used for callbacks WARNING!!! only for expert use Automatically done at the moment when any callback function is invoked Can be invoked once again if window Run method will be invoked from other thread Normally should be invoked before Show() method is called.

Definition at line 1472 of file RWebWindow.cxx.

◆ CanSend()

bool RWebWindow::CanSend	(	unsigned	connid,
		bool	direct = `true`
	)		const

Returns true if sending via specified connection can be performed.

Parameters

connid	connection id, when 0 - all existing connections are checked
direct	when true, checks if direct sending (without queuing) is possible

Definition at line 1311 of file RWebWindow.cxx.

◆ CheckDataToSend() [1/2]

void RWebWindow::CheckDataToSend ( bool only_once = false )

private

Checks if new data can be send (internal use only) If necessary, provide credits to the client.

Parameters

only_once if true, data sending performed once or until there is no data to send

Definition at line 1043 of file RWebWindow.cxx.

◆ CheckDataToSend() [2/2]

bool RWebWindow::CheckDataToSend ( std::shared_ptr< WebConn > & conn )

private

Checks if one should send data for specified connection Returns true when send operation was performed.

Definition at line 995 of file RWebWindow.cxx.

◆ CheckInactiveConnections()

void RWebWindow::CheckInactiveConnections ( )

private

Check if there are connection which are inactive for longer time For instance, batch browser will be stopped if no activity for 30 sec is there.

Definition at line 606 of file RWebWindow.cxx.

◆ CheckPendingConnections()

void RWebWindow::CheckPendingConnections ( )

private

Check if started process(es) establish connection.

After timeout such processed will be killed Method invoked from http server thread, therefore appropriate mutex must be used on all relevant data

Definition at line 571 of file RWebWindow.cxx.

◆ CloseConnection()

void RWebWindow::CloseConnection ( unsigned connid )

Close specified connection.

Parameters

connid connection id, when 0 - all connections will be closed

Definition at line 1274 of file RWebWindow.cxx.

◆ CloseConnections()

void RWebWindow::CloseConnections ( )

Closes all connection to clients Normally leads to closing of all correspondent browser windows Some browsers (like firefox) do not allow by default to close window.

Definition at line 1265 of file RWebWindow.cxx.

◆ CompleteWSSend()

void RWebWindow::CompleteWSSend ( unsigned wsid )

private

Complete websocket send operation Clear "doing send" flag and check if next operation has to be started.

Definition at line 929 of file RWebWindow.cxx.

◆ Create()

std::shared_ptr< RWebWindow > RWebWindow::Create ( )

static

Create new RWebWindow Using default RWebWindowsManager.

Definition at line 1710 of file RWebWindow.cxx.

◆ CreateWSHandler()

std::shared_ptr< RWebWindowWSHandler > RWebWindow::CreateWSHandler	(	std::shared_ptr< RWebWindowsManager >	mgr,
		unsigned	id,
		double	tmout
	)

private

Assigns manager reference, window id and creates websocket handler, used for communication with the clients.

Definition at line 143 of file RWebWindow.cxx.

◆ EmbedFileDialog()

bool RWebWindow::EmbedFileDialog	(	const std::shared_ptr< RWebWindow > &	window,
		unsigned	connid,
		const std::string &	args
	)

static

Create dialog instance to use as embedded dialog inside provided widget Loads libROOTBrowserv7 and tries to call RFileDialog::Embedded() method Embedded dialog started on the client side where FileDialogController.SaveAs() method called Such method immediately send message with "FILEDIALOG:" prefix On the server side widget should detect such message and call RFileDialog::Embedded() providing received string as second argument.

Returned instance of shared_ptr<RFileDialog> may be used to assign callback when file is selected

Definition at line 1804 of file RWebWindow.cxx.

◆ FindConnection()

std::shared_ptr< WebConn > ROOT::RWebWindow::FindConnection ( unsigned wsid )

inlineprivate

Find connection with specified websocket id.

Definition at line 182 of file RWebWindow.hxx.

◆ FindHeadlessConnection()

unsigned RWebWindow::FindHeadlessConnection ( )

private

Returns connection id of window running in headless mode This can be special connection which may run picture production jobs in background Connection to that job may not be initialized yet If connection does not exists, returns 0.

Definition at line 207 of file RWebWindow.cxx.

◆ FindOrCreateConnection()

std::shared_ptr< RWebWindow::WebConn > RWebWindow::FindOrCreateConnection	(	unsigned	wsid,
		bool	make_new,
		const char *	query
	)

private

Find connection with given websocket id.

Definition at line 250 of file RWebWindow.cxx.

◆ GenerateKey()

std::string RWebWindow::GenerateKey ( ) const

private

Generate new unique key for the window.

Definition at line 551 of file RWebWindow.cxx.

◆ GetAddr()

std::string RWebWindow::GetAddr ( ) const

Returns window address which is used in URL.

Definition at line 1077 of file RWebWindow.cxx.

◆ GetClientVersion()

std::string RWebWindow::GetClientVersion ( ) const

Returns current client version.

Definition at line 1125 of file RWebWindow.cxx.

◆ GetConnectionId()

unsigned RWebWindow::GetConnectionId ( int num = 0 ) const

Returns connection id for specified connection sequence number Only active connections are returned - where clients confirms connection Total number of connections can be retrieved with NumConnections() method.

Parameters

num	connection sequence number

Definition at line 1197 of file RWebWindow.cxx.

◆ GetConnections()

std::vector< unsigned > RWebWindow::GetConnections ( unsigned excludeid = 0 ) const

returns vector with all existing connections ids One also can exclude specified connection from return result, which can be useful to be able reply too all but this connections

Definition at line 1214 of file RWebWindow.cxx.

◆ GetConnLimit()

unsigned RWebWindow::GetConnLimit ( ) const

returns configured connections limit (0 - default)

Definition at line 651 of file RWebWindow.cxx.

◆ GetConnToken()

std::string RWebWindow::GetConnToken ( ) const

private

Returns configured connection token.

Definition at line 673 of file RWebWindow.cxx.

◆ GetDisplayConnection()

unsigned RWebWindow::GetDisplayConnection ( ) const

Returns first connection id where window is displayed It could be that connection(s) not yet fully established - but also not timed out Batch jobs will be ignored here Returns 0 if connection not exists.

Definition at line 230 of file RWebWindow.cxx.

◆ GetHeight()

unsigned ROOT::RWebWindow::GetHeight ( ) const

inline

returns configured window height (0 - default)

Definition at line 273 of file RWebWindow.hxx.

◆ GetId()

unsigned ROOT::RWebWindow::GetId ( ) const

inline

Returns ID for the window - unique inside window manager.

Definition at line 239 of file RWebWindow.hxx.

◆ GetManager()

std::shared_ptr< RWebWindowsManager > ROOT::RWebWindow::GetManager ( ) const

inline

Returns window manager.

Definition at line 242 of file RWebWindow.hxx.

◆ GetMasterConnections()

std::vector< RWebWindow::MasterConn > RWebWindow::GetMasterConnections ( unsigned connid = 0 ) const

private

Get list of master connections.

Definition at line 342 of file RWebWindow.cxx.

◆ GetMaxQueueLength()

unsigned ROOT::RWebWindow::GetMaxQueueLength ( ) const

inline

Return maximal queue length of data which can be held by window.

Definition at line 295 of file RWebWindow.hxx.

◆ GetOperationTmout()

float ROOT::RWebWindow::GetOperationTmout ( ) const

inline

Returns timeout for synchronous WebWindow operations.

Definition at line 326 of file RWebWindow.hxx.

◆ GetRelativeAddr() [1/2]

std::string RWebWindow::GetRelativeAddr ( const RWebWindow & win ) const

Returns relative URL address for the specified window Address can be required if one needs to access data from one window into another window Used for instance when inserting panel into canvas.

Definition at line 1097 of file RWebWindow.cxx.

◆ GetRelativeAddr() [2/2]

std::string RWebWindow::GetRelativeAddr ( const std::shared_ptr< RWebWindow > & win ) const

Returns relative URL address for the specified window Address can be required if one needs to access data from one window into another window Used for instance when inserting panel into canvas.

Definition at line 1087 of file RWebWindow.cxx.

◆ GetSendQueueLength()

int RWebWindow::GetSendQueueLength ( unsigned connid ) const

Returns send queue length for specified connection.

Parameters

connid connection id, 0 - maximal value for all connections is returned If wrong connection id specified, -1 is return

Definition at line 1336 of file RWebWindow.cxx.

◆ GetServer()

THttpServer * RWebWindow::GetServer ( )

Return THttpServer instance serving requests to the window.

Definition at line 167 of file RWebWindow.cxx.

◆ GetUrl()

std::string RWebWindow::GetUrl ( bool remote = true )

Return URL string to access web window.

Parameters

remote if true, real HTTP server will be started automatically

Definition at line 159 of file RWebWindow.cxx.

◆ GetUserArgs()

std::string RWebWindow::GetUserArgs ( ) const

Returns configured user arguments for web window See SetUserArgs method for more details.

Definition at line 1147 of file RWebWindow.cxx.

◆ GetWidth()

unsigned ROOT::RWebWindow::GetWidth ( ) const

inline

returns configured window width (0 - default) actual window width can be different

Definition at line 269 of file RWebWindow.hxx.

◆ GetWindowConnections()

RWebWindow::ConnectionsList_t RWebWindow::GetWindowConnections	(	unsigned	connid = `0`,
		bool	only_active = `false`
	)		const

private

returns connection list (or all active connections)

Parameters

connid	connection id, when 0 - all existing connections are returned
only_active	when true, only active (already established) connections are returned

Definition at line 1285 of file RWebWindow.cxx.

◆ GetX()

int ROOT::RWebWindow::GetX ( ) const

inline

returns configured window X position (-1 - default)

Definition at line 277 of file RWebWindow.hxx.

◆ GetY()

int ROOT::RWebWindow::GetY ( ) const

inline

returns configured window Y position (-1 - default)

Definition at line 281 of file RWebWindow.hxx.

◆ HasConnection()

bool RWebWindow::HasConnection	(	unsigned	connid = `0`,
		bool	only_active = `true`
	)		const

returns true if specified connection id exists

Parameters

connid	connection id (0 - any)
only_active	when true only active connection will be checked, otherwise also pending (not yet established) connections are checked

Definition at line 1240 of file RWebWindow.cxx.

◆ HasKey()

bool RWebWindow::HasKey ( const std::string & key ) const

private

Returns true if provided key value already exists (in processes map or in existing connections)

Definition at line 537 of file RWebWindow.cxx.

◆ InvokeCallbacks()

void RWebWindow::InvokeCallbacks ( bool force = false )

private

Invoke callbacks with existing data Must be called from appropriate thread.

Definition at line 455 of file RWebWindow.cxx.

◆ IsFileDialogMessage()

bool RWebWindow::IsFileDialogMessage ( const std::string & msg )

static

Check if this could be the message send by client to start new file dialog If returns true, one can call RWebWindow::EmbedFileDialog() to really create file dialog instance inside existing widget.

Definition at line 1790 of file RWebWindow.cxx.

◆ IsNativeOnlyConn()

bool ROOT::RWebWindow::IsNativeOnlyConn ( ) const

inline

returns true if only native (own-created) connections are allowed

Definition at line 303 of file RWebWindow.hxx.

◆ IsShown()

bool ROOT::RWebWindow::IsShown ( ) const

inline

Returns true when window was shown at least once.

Definition at line 344 of file RWebWindow.hxx.

◆ MakeHeadless()

unsigned RWebWindow::MakeHeadless ( bool create_new = false )

private

Start headless browser for specified window Normally only single instance is used, but many can be created See ROOT::RWebWindowsManager::Show() docu for more info returns (future) connection id (or 0 when fails)

Definition at line 188 of file RWebWindow.cxx.

◆ NumConnections()

int RWebWindow::NumConnections ( bool with_pending = false ) const

Returns current number of active clients connections.

Parameters

with_pending if true, also pending (not yet established) connection accounted

Definition at line 1157 of file RWebWindow.cxx.

◆ ProcessBatchHolder()

bool RWebWindow::ProcessBatchHolder ( std::shared_ptr< THttpCallArg > & arg )

private

Process special http request, used to hold headless browser running Such requests should not be replied for the long time Be aware that function called directly from THttpServer thread, which is not same thread as window.

Definition at line 391 of file RWebWindow.cxx.

◆ ProcessWS()

bool RWebWindow::ProcessWS ( THttpCallArg & arg )

private

Processing of websockets call-backs, invoked from RWebWindowWSHandler Method invoked from http server thread, therefore appropriate mutex must be used on all relevant data.

Definition at line 684 of file RWebWindow.cxx.

◆ ProvideQueueEntry()

void RWebWindow::ProvideQueueEntry	(	unsigned	connid,
		EQueueEntryKind	kind,
		std::string &&	arg
	)

private

Provide data to user callback User callback must be executed in the window thread.

Definition at line 438 of file RWebWindow.cxx.

◆ RecordData()

void RWebWindow::RecordData	(	const std::string &	fname = `"protocol.json"`,
		const std::string &	fprefix = `""`
	)

Configures recording of communication data in protocol file Provided filename will be used to store JSON array with names of written files - text or binary If data was send from client, "send" entry will be placed.

JSON file will look like:

 ["send", "msg0.txt", "send", "msg1.txt", "msg2.txt"]

If empty file name is provided, data recording will be disabled Recorded data can be used in JSROOT directly to test client code without running C++ server

Definition at line 1182 of file RWebWindow.cxx.

◆ RemoveConnection()

std::shared_ptr< RWebWindow::WebConn > RWebWindow::RemoveConnection ( unsigned wsid )

private

Remove connection with given websocket id.

Definition at line 296 of file RWebWindow.cxx.

◆ RemoveEmbedWindow()

void RWebWindow::RemoveEmbedWindow	(	unsigned	connid,
		int	channel
	)

private

Remove RWebWindow associated with the channelfEmbed.

Definition at line 1694 of file RWebWindow.cxx.

◆ RemoveMasterConnection()

void RWebWindow::RemoveMasterConnection ( unsigned connid = 0 )

private

Remove master connection - if any.

Definition at line 360 of file RWebWindow.cxx.

◆ Run()

void RWebWindow::Run ( double tm = 0. )

Run window functionality for specified time If no action can be performed - just sleep specified time.

Definition at line 1654 of file RWebWindow.cxx.

◆ Send()

void RWebWindow::Send	(	unsigned	connid,
		const std::string &	data
	)

Sends data to specified connection.

Parameters

connid	connection id, when 0 - data will be send to all connections
data	data to be copied to SubmitData function

Definition at line 1436 of file RWebWindow.cxx.

◆ SendBinary() [1/2]

void RWebWindow::SendBinary	(	unsigned	connid,
		const void *	data,
		std::size_t	len
	)

Send binary data to specified connection.

Parameters

connid	connection id, when 0 - data will be send to all connections
data	pointer to binary data
len	number of bytes in data

Definition at line 1457 of file RWebWindow.cxx.

◆ SendBinary() [2/2]

void RWebWindow::SendBinary	(	unsigned	connid,
		std::string &&	data
	)

Send binary data to specified connection.

Parameters

connid	connection id, when 0 - data will be send to all connections
data	data to be std-moved to SubmitData function

Definition at line 1446 of file RWebWindow.cxx.

◆ SetCallBacks()

void RWebWindow::SetCallBacks	(	WebWindowConnectCallback_t	conn,
		WebWindowDataCallback_t	data,
		WebWindowConnectCallback_t	disconn = `nullptr`
	)

Set call-backs function for connect, data and disconnect events.

Definition at line 1599 of file RWebWindow.cxx.

◆ SetClearOnClose()

void RWebWindow::SetClearOnClose ( const std::shared_ptr< void > & handle = nullptr )

Set handle which is cleared when last active connection is closed Typically can be used to destroy web-based widget at such moment.

Definition at line 1591 of file RWebWindow.cxx.

◆ SetClientVersion()

void RWebWindow::SetClientVersion ( const std::string & vers )

Set client version, used as prefix in scripts URL When changed, web browser will reload all related JS files while full URL will be different Default is empty value - no extra string in URL Version should be string like "1.2" or "ver1.subv2" and not contain any special symbols.

Definition at line 1116 of file RWebWindow.cxx.

◆ SetConnectCallBack()

void RWebWindow::SetConnectCallBack ( WebWindowConnectCallback_t func )

Set call-back function for new connection.

Definition at line 1570 of file RWebWindow.cxx.

◆ SetConnLimit()

void RWebWindow::SetConnLimit ( unsigned lmt = 0 )

Configure maximal number of allowed connections - 0 is unlimited Will not affect already existing connections Default is 1 - the only client is allowed.

Definition at line 641 of file RWebWindow.cxx.

◆ SetConnToken()

void RWebWindow::SetConnToken ( const std::string & token = "" )

Configures connection token (default none) When specified, in URL of webpage such token should be provided as &token=value parameter, otherwise web window will refuse connection.

Definition at line 663 of file RWebWindow.cxx.

◆ SetDataCallBack()

void RWebWindow::SetDataCallBack ( WebWindowDataCallback_t func )

Set call-back function for data, received from the clients via websocket.

Function should have signature like void func(unsigned connid, const std::string &data) First argument identifies connection (unique for each window), second argument is received data

At the moment when callback is assigned, RWebWindow working thread is detected. If called not from main application thread, RWebWindow::Run() function must be regularly called from that thread.

Most simple way to assign call-back - use of c++11 lambdas like:

auto win = RWebWindow::Create();
win->SetDefaultPage("file:./page.htm");
win->SetDataCallBack(
         [](unsigned connid, const std::string &data) {
                 printf("Conn:%u data:%s\n", connid, data.c_str());
          }
      );
win->Show();

Definition at line 1560 of file RWebWindow.cxx.

◆ SetDefaultPage()

void ROOT::RWebWindow::SetDefaultPage ( const std::string & page )

inline

Set content of default window HTML page This page returns when URL address of the window will be requested Either HTML code or file name in the form "file:/home/user/data/file.htm" One also can using default locations like "file:rootui5sys/canv/canvas.html".

Definition at line 248 of file RWebWindow.hxx.

◆ SetDisconnectCallBack()

void RWebWindow::SetDisconnectCallBack ( WebWindowConnectCallback_t func )

Set call-back function for disconnecting.

Definition at line 1580 of file RWebWindow.cxx.

◆ SetGeometry()

void ROOT::RWebWindow::SetGeometry	(	unsigned	width,
		unsigned	height
	)

inline

Set window geometry. Will be applied if supported by used web display (like CEF or Chromium)

Definition at line 253 of file RWebWindow.hxx.

◆ SetMaxQueueLength()

void ROOT::RWebWindow::SetMaxQueueLength ( unsigned len = 10 )

inline

configures maximal queue length of data which can be held by window

Definition at line 291 of file RWebWindow.hxx.

◆ SetNativeOnlyConn()

void ROOT::RWebWindow::SetNativeOnlyConn ( bool on = true )

inline

configures that only native (own-created) connections are allowed

Definition at line 299 of file RWebWindow.hxx.

◆ SetOperationTmout()

void ROOT::RWebWindow::SetOperationTmout ( float tm = 50. )

inline

Set timeout for synchronous WebWindow operations.

Definition at line 329 of file RWebWindow.hxx.

◆ SetPanelName()

void RWebWindow::SetPanelName ( const std::string & name )

Configure window to show some of existing JSROOT panels It uses "file:rootui5sys/panel/panel.html" as default HTML page At the moment only FitPanel is existing.

Definition at line 125 of file RWebWindow.cxx.

◆ SetPosition()

void ROOT::RWebWindow::SetPosition	(	unsigned	x,
		unsigned	y
	)

inline

Set window position. Will be applied if supported by used web display (like CEF or Chromium)

Definition at line 260 of file RWebWindow.hxx.

◆ SetStartDialogFunc()

void RWebWindow::SetStartDialogFunc ( std::function< bool(const std::shared_ptr< RWebWindow > &, unsigned, const std::string &)> func )

staticprivate

Configure func which has to be used for starting dialog.

Definition at line 1780 of file RWebWindow.cxx.

◆ SetUserArgs()

void RWebWindow::SetUserArgs ( const std::string & args )

Set arbitrary JSON data, which is accessible via conn.getUserArgs() method in JavaScript This JSON code injected into main HTML document into connectWebWindow({}) Must be set before RWebWindow::Show() method is called.

Parameters

args	- arbitrary JSON data which can be provided to client side

Definition at line 1137 of file RWebWindow.cxx.

◆ Show()

unsigned RWebWindow::Show ( const RWebDisplayArgs & args = "" )

Show window in specified location.

See also: ROOT::RWebWindowsManager::Show for more info

Returns: (future) connection id (or 0 when fails)

Definition at line 177 of file RWebWindow.cxx.

◆ ShowWindow()

unsigned RWebWindow::ShowWindow	(	std::shared_ptr< RWebWindow >	window,
		const RWebDisplayArgs &	args = `""`
	)

static

Static method to show web window Has to be used instead of RWebWindow::Show() when window potentially can be embed into other windows Soon RWebWindow::Show() method will be done protected.

Definition at line 1742 of file RWebWindow.cxx.

◆ StartThread()

void RWebWindow::StartThread ( )

Start special thread which will be used by the window to handle all callbacks One has to be sure, that access to global ROOT structures are minimized and protected with ROOT::EnableThreadSafety(); call.

Definition at line 1507 of file RWebWindow.cxx.

◆ StopThread()

void RWebWindow::StopThread ( )

Stop special thread.

Definition at line 1529 of file RWebWindow.cxx.

◆ SubmitData()

void RWebWindow::SubmitData	(	unsigned	connid,
		bool	txt,
		std::string &&	data,
		int	chid = `1`
	)

private

Internal method to send data.

Parameters

connid	connection id, when 0 - data will be send to all connections
txt	is text message that should be sent
data	data to be std-moved to SubmitData function
chid	channel id, 1 - normal communication, 0 - internal with highest priority

Definition at line 1356 of file RWebWindow.cxx.

◆ Sync()

void RWebWindow::Sync ( )

Special method to process all internal activity when window runs in separate thread.

Definition at line 1063 of file RWebWindow.cxx.

◆ TerminateROOT()

void RWebWindow::TerminateROOT ( )

Terminate ROOT session Tries to correctly close THttpServer, associated with RWebWindowsManager After that exit from process.

Definition at line 1720 of file RWebWindow.cxx.

◆ UseServerThreads()

void RWebWindow::UseServerThreads ( )

Let use THttpServer threads to process requests WARNING!!! only for expert use Should be only used when application provides proper locking and does not block.

Such mode provides minimal possible latency Must be called before callbacks are assigned

Definition at line 1494 of file RWebWindow.cxx.

◆ WaitFor()

int RWebWindow::WaitFor ( WebWindowWaitFunc_t check )

Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

Parameter spent_tm is time in seconds, which already spent inside the function First non-zero value breaks loop and result is returned. Runs application mainloop and short sleeps in-between

Definition at line 1616 of file RWebWindow.cxx.

◆ WaitForTimed() [1/2]

int RWebWindow::WaitForTimed ( WebWindowWaitFunc_t check )

Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

Parameter spent_tm in lambda is time in seconds, which already spent inside the function First non-zero value breaks waiting loop and result is returned (or 0 if time is expired). Runs application mainloop and short sleeps in-between WebGui.OperationTmout rootrc parameter defines waiting time in seconds

Definition at line 1630 of file RWebWindow.cxx.

◆ WaitForTimed() [2/2]

int RWebWindow::WaitForTimed	(	WebWindowWaitFunc_t	check,
		double	duration
	)

Waits until provided check function or lambdas returns non-zero value Check function has following signature: int func(double spent_tm) Waiting will be continued, if function returns zero.

Parameter spent_tm in lambda is time in seconds, which already spent inside the function First non-zero value breaks waiting loop and result is returned (or 0 if time is expired). Runs application mainloop and short sleeps in-between duration (in seconds) defines waiting time

Definition at line 1644 of file RWebWindow.cxx.

Friends And Related Symbol Documentation

◆ RFileDialog

friend class RFileDialog

friend

Definition at line 57 of file RWebWindow.hxx.

◆ RWebDisplayHandle

friend class RWebDisplayHandle

friend

Definition at line 56 of file RWebWindow.hxx.

◆ RWebWindowsManager

friend class RWebWindowsManager

friend

Definition at line 54 of file RWebWindow.hxx.

◆ RWebWindowWSHandler

friend class RWebWindowWSHandler

friend

Definition at line 55 of file RWebWindow.hxx.

Member Data Documentation

◆ fCallbacksThrdId

std::thread::id ROOT::RWebWindow::fCallbacksThrdId

private

! thread id where callbacks should be invoked

Definition at line 153 of file RWebWindow.hxx.

◆ fCallbacksThrdIdSet

bool ROOT::RWebWindow::fCallbacksThrdIdSet {false}

private

! flag indicating that thread id is assigned

Definition at line 154 of file RWebWindow.hxx.

◆ fClearOnClose

std::shared_ptr<void> ROOT::RWebWindow::fClearOnClose

private

! entry which is cleared when last connection is closed

Definition at line 169 of file RWebWindow.hxx.

◆ fClientVersion

std::string ROOT::RWebWindow::fClientVersion

private

! configured client version, used as prefix in scripts URL

Definition at line 162 of file RWebWindow.hxx.

◆ fConn

ConnectionsList_t ROOT::RWebWindow::fConn

private

! list of all accepted connections

Definition at line 144 of file RWebWindow.hxx.

◆ fConnCallback

WebWindowConnectCallback_t ROOT::RWebWindow::fConnCallback

private

! callback for connect event

Definition at line 150 of file RWebWindow.hxx.

◆ fConnCnt

unsigned ROOT::RWebWindow::fConnCnt {0}

private

! counter of new connections to assign ids

Definition at line 142 of file RWebWindow.hxx.

◆ fConnLimit

unsigned ROOT::RWebWindow::fConnLimit {1}

private

! number of allowed active connections

Definition at line 146 of file RWebWindow.hxx.

◆ fConnMutex

std::mutex ROOT::RWebWindow::fConnMutex

mutableprivate

! mutex used to protect connection list

Definition at line 145 of file RWebWindow.hxx.

◆ fConnToken

std::string ROOT::RWebWindow::fConnToken

private

! value of "token" URL parameter which should be provided for connecting window

Definition at line 147 of file RWebWindow.hxx.

◆ fDataCallback

WebWindowDataCallback_t ROOT::RWebWindow::fDataCallback

private

! main callback when data over channel 1 is arrived

Definition at line 151 of file RWebWindow.hxx.

◆ fDefaultPage

std::string ROOT::RWebWindow::fDefaultPage

private

! HTML page (or file name) returned when window URL is opened

Definition at line 134 of file RWebWindow.hxx.

◆ fDisconnCallback

WebWindowConnectCallback_t ROOT::RWebWindow::fDisconnCallback

private

! callback for disconnect event

Definition at line 152 of file RWebWindow.hxx.

◆ fHasWindowThrd

bool ROOT::RWebWindow::fHasWindowThrd {false}

private

! indicate if special window thread was started

Definition at line 155 of file RWebWindow.hxx.

◆ fHeight

unsigned ROOT::RWebWindow::fHeight {0}

private

! initial window width and height when displayed, zeros are ignored

Definition at line 159 of file RWebWindow.hxx.

◆ fId

unsigned ROOT::RWebWindow::fId {0}

private

! unique identifier

Definition at line 136 of file RWebWindow.hxx.

◆ fInputQueue

std::queue<QueueEntry> ROOT::RWebWindow::fInputQueue

private

! input queue for all callbacks

Definition at line 157 of file RWebWindow.hxx.

◆ fInputQueueMutex

std::mutex ROOT::RWebWindow::fInputQueueMutex

private

! mutex to protect input queue

Definition at line 158 of file RWebWindow.hxx.

◆ fMaster

std::shared_ptr<RWebWindow> ROOT::RWebWindow::fMaster

private

! master window where this window is embedded

Definition at line 132 of file RWebWindow.hxx.

◆ fMasterConns

std::vector<MasterConn> ROOT::RWebWindow::fMasterConns

private

! master connections

Definition at line 133 of file RWebWindow.hxx.

◆ fMaxQueueLength

unsigned ROOT::RWebWindow::fMaxQueueLength {10}

private

! maximal number of queue entries

Definition at line 149 of file RWebWindow.hxx.

◆ fMgr

std::shared_ptr<RWebWindowsManager> ROOT::RWebWindow::fMgr

private

! display manager

Definition at line 131 of file RWebWindow.hxx.

◆ fNativeOnlyConn

bool ROOT::RWebWindow::fNativeOnlyConn {false}

private

! only native connection are allowed, created by Show() method

Definition at line 148 of file RWebWindow.hxx.

◆ fOperationTmout

float ROOT::RWebWindow::fOperationTmout {50.}

private

! timeout in seconds to perform synchronous operation, default 50s

Definition at line 161 of file RWebWindow.hxx.

◆ fPanelName

std::string ROOT::RWebWindow::fPanelName

private

! panel name which should be shown in the window

Definition at line 135 of file RWebWindow.hxx.

◆ fPendingConn

ConnectionsList_t ROOT::RWebWindow::fPendingConn

private

! list of pending connection with pre-assigned keys

Definition at line 143 of file RWebWindow.hxx.

◆ fProcessMT

bool ROOT::RWebWindow::fProcessMT {false}

private

! if window event processing performed in dedicated thread

Definition at line 139 of file RWebWindow.hxx.

◆ fProtocol

std::string ROOT::RWebWindow::fProtocol

private

! protocol

Definition at line 167 of file RWebWindow.hxx.

◆ fProtocolCnt

int ROOT::RWebWindow::fProtocolCnt {-1}

private

! counter for protocol recording

Definition at line 164 of file RWebWindow.hxx.

◆ fProtocolConnId

unsigned ROOT::RWebWindow::fProtocolConnId {0}

private

! connection id, which is used for writing protocol

Definition at line 165 of file RWebWindow.hxx.

◆ fProtocolFileName

std::string ROOT::RWebWindow::fProtocolFileName

private

! local file where communication protocol will be written

Definition at line 163 of file RWebWindow.hxx.

◆ fProtocolPrefix

std::string ROOT::RWebWindow::fProtocolPrefix

private

! prefix for created files names

Definition at line 166 of file RWebWindow.hxx.

◆ fSendMT

bool ROOT::RWebWindow::fSendMT {false}

private

! true is special threads should be used for sending data

Definition at line 140 of file RWebWindow.hxx.

◆ fUseProcessEvents

bool ROOT::RWebWindow::fUseProcessEvents {false}

private

! all window functionality will run through process events

Definition at line 138 of file RWebWindow.hxx.

◆ fUserArgs

std::string ROOT::RWebWindow::fUserArgs

private

! arbitrary JSON code, which is accessible via conn.getUserArgs() method

Definition at line 168 of file RWebWindow.hxx.

◆ fUseServerThreads

bool ROOT::RWebWindow::fUseServerThreads {false}

private

! indicates that server thread is using, no special window thread

Definition at line 137 of file RWebWindow.hxx.

◆ fWidth

unsigned ROOT::RWebWindow::fWidth {0}

private

Definition at line 159 of file RWebWindow.hxx.

◆ fWindowThrd

std::thread ROOT::RWebWindow::fWindowThrd

private

! special thread for that window

Definition at line 156 of file RWebWindow.hxx.

◆ fWSHandler

std::shared_ptr<RWebWindowWSHandler> ROOT::RWebWindow::fWSHandler

private

! specialize websocket handler for all incoming connections

Definition at line 141 of file RWebWindow.hxx.

◆ fX

int ROOT::RWebWindow::fX {-1}

private

Definition at line 160 of file RWebWindow.hxx.

◆ fY

int ROOT::RWebWindow::fY {-1}

private

! initial window position, -1 ignored

Definition at line 160 of file RWebWindow.hxx.

◆ gStartDialogFunc

std::function< bool(const std::shared_ptr< RWebWindow > &, unsigned, const std::string &)> RWebWindow::gStartDialogFunc = nullptr

staticprivate

Definition at line 228 of file RWebWindow.hxx.

Libraries for ROOT::RWebWindow:

[legend]

The documentation for this class was generated from the following files:

gui/webdisplay/inc/ROOT/RWebWindow.hxx
gui/webdisplay/src/RWebWindow.cxx

Classes

Public Member Functions

Static Public Member Functions

Private Types

Private Member Functions

Static Private Member Functions

Private Attributes

Static Private Attributes

Friends

Member Typedef Documentation

◆ ConnectionsList_t

◆ timestamp_t

Member Enumeration Documentation

◆ EQueueEntryKind

Constructor & Destructor Documentation

◆ RWebWindow()

◆ ~RWebWindow()

Member Function Documentation

◆ _FindConnWithKey()

◆ _MakeSendHeader()

◆ AddDisplayHandle()

◆ AddEmbedWindow()

◆ AddMasterConnection()

◆ AssignThreadId()

◆ CanSend()

◆ CheckDataToSend() [1/2]

◆ CheckDataToSend() [2/2]

◆ CheckInactiveConnections()

◆ CheckPendingConnections()

◆ CloseConnection()

◆ CloseConnections()

◆ CompleteWSSend()

◆ Create()

◆ CreateWSHandler()

◆ EmbedFileDialog()

◆ FindConnection()

◆ FindHeadlessConnection()

◆ FindOrCreateConnection()

◆ GenerateKey()

◆ GetAddr()

◆ GetClientVersion()

◆ GetConnectionId()

◆ GetConnections()

◆ GetConnLimit()

◆ GetConnToken()

◆ GetDisplayConnection()

◆ GetHeight()

◆ GetId()

◆ GetManager()

◆ GetMasterConnections()

◆ GetMaxQueueLength()

◆ GetOperationTmout()

◆ GetRelativeAddr() [1/2]

◆ GetRelativeAddr() [2/2]

◆ GetSendQueueLength()

◆ GetServer()

◆ GetUrl()

◆ GetUserArgs()

◆ GetWidth()

◆ GetWindowConnections()

◆ GetX()

◆ GetY()

◆ HasConnection()

◆ HasKey()

◆ InvokeCallbacks()

◆ IsFileDialogMessage()

◆ IsNativeOnlyConn()

◆ IsShown()

◆ MakeHeadless()

◆ NumConnections()

◆ ProcessBatchHolder()

◆ ProcessWS()

◆ ProvideQueueEntry()

◆ RecordData()

◆ RemoveConnection()

◆ RemoveEmbedWindow()

◆ RemoveMasterConnection()

◆ Run()

◆ Send()

◆ SendBinary() [1/2]