TGeoTrd1.cxx

Go to the documentation of this file.

// @(#)root/geom:$Id$
// Author: Andrei Gheata   24/10/01
// TGeoTrd1::Contains() and DistFromInside() implemented by Mihaela Gheata
 
/*************************************************************************
 * Copyright (C) 1995-2000, Rene Brun and Fons Rademakers.               *
 * All rights reserved.                                                  *
 *                                                                       *
 * For the licensing terms see $ROOTSYS/LICENSE.                         *
 * For the list of contributors see $ROOTSYS/README/CREDITS.             *
 *************************************************************************/
 
/** \class TGeoTrd1
\ingroup Trapezoids
 
A trapezoid with only X varying with Z. It is defined by the
half-length in Z, the half-length in X at the lowest and highest Z
planes and the half-length in Y:
 
~~~ {.cpp}
TGeoTrd1(Double_t dx1,Double_t dx2,Double_t dy,Double_t dz);
~~~
 
Begin_Macro
{
   TCanvas *c = new TCanvas("c", "c",0,0,600,600);
   new TGeoManager("trd1", "poza8");
   TGeoMaterial *mat = new TGeoMaterial("Al", 26.98,13,2.7);
   TGeoMedium *med = new TGeoMedium("MED",1,mat);
   TGeoVolume *top = gGeoManager->MakeBox("TOP",med,100,100,100);
   gGeoManager->SetTopVolume(top);
   TGeoVolume *vol = gGeoManager->MakeTrd1("Trd1",med, 10,20,30,40);
   vol->SetLineWidth(2);
   top->AddNode(vol,1);
   gGeoManager->CloseGeometry();
   gGeoManager->SetNsegments(80);
   top->Draw();
   TView *view = gPad->GetView();
   view->ShowAxis();
}
End_Macro
*/
 
#include <iostream>
 
#include "TGeoManager.h"
#include "TGeoMatrix.h"
#include "TGeoVolume.h"
#include "TGeoTrd1.h"
#include "TMath.h"
 
ClassImp(TGeoTrd1);
 
////////////////////////////////////////////////////////////////////////////////
/// dummy ctor
 
TGeoTrd1::TGeoTrd1()
{
   fDz = fDx1 = fDx2 = fDy = 0;
   SetShapeBit(kGeoTrd1);
}
 
////////////////////////////////////////////////////////////////////////////////
/// constructor.
 
TGeoTrd1::TGeoTrd1(Double_t dx1, Double_t dx2, Double_t dy, Double_t dz) : TGeoBBox(0, 0, 0)
{
   SetShapeBit(kGeoTrd1);
   fDx1 = dx1;
   fDx2 = dx2;
   fDy = dy;
   fDz = dz;
   if ((dx1 < 0) || (dx2 < 0) || (dy < 0) || (dz < 0)) {
      SetShapeBit(kGeoRunTimeShape);
      printf("trd1 : dx1=%f, dx2=%f, dy=%f, dz=%f\n", dx1, dx2, dy, dz);
   } else
      ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// constructor.
 
TGeoTrd1::TGeoTrd1(const char *name, Double_t dx1, Double_t dx2, Double_t dy, Double_t dz) : TGeoBBox(name, 0, 0, 0)
{
   SetShapeBit(kGeoTrd1);
   fDx1 = dx1;
   fDx2 = dx2;
   fDy = dy;
   fDz = dz;
   if ((dx1 < 0) || (dx2 < 0) || (dy < 0) || (dz < 0)) {
      SetShapeBit(kGeoRunTimeShape);
      printf("trd1 : dx1=%f, dx2=%f, dy=%f, dz=%f\n", dx1, dx2, dy, dz);
   } else
      ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// ctor with an array of parameters
///  - param[0] = dx1
///  - param[1] = dx2
///  - param[2] = dy
///  - param[3] = dz
 
TGeoTrd1::TGeoTrd1(Double_t *param) : TGeoBBox(0, 0, 0)
{
   SetShapeBit(kGeoTrd1);
   SetDimensions(param);
   if ((fDx1 < 0) || (fDx2 < 0) || (fDy <= 0) || (fDz <= 0))
      SetShapeBit(kGeoRunTimeShape);
   else
      ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// destructor
 
TGeoTrd1::~TGeoTrd1() {}
 
////////////////////////////////////////////////////////////////////////////////
/// Computes capacity of the shape in [length^3]
 
Double_t TGeoTrd1::Capacity() const
{
   Double_t capacity = 4. * (fDx1 + fDx2) * fDy * fDz;
   return capacity;
}
 
////////////////////////////////////////////////////////////////////////////////
/// compute bounding box for a trd1
 
void TGeoTrd1::ComputeBBox()
{
   fDX = TMath::Max(fDx1, fDx2);
   fDY = fDy;
   fDZ = fDz;
   memset(fOrigin, 0, 3 * sizeof(Double_t));
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute normal to closest surface from POINT.
 
void TGeoTrd1::ComputeNormal(const Double_t *point, const Double_t *dir, Double_t *norm)
{
   Double_t safe, safemin;
   //--- Compute safety first
   Double_t fx = 0.5 * (fDx1 - fDx2) / fDz;
   Double_t calf = 1. / TMath::Sqrt(1.0 + fx * fx);
   // check Z facettes
   safe = safemin = TMath::Abs(fDz - TMath::Abs(point[2]));
   norm[0] = norm[1] = 0;
   norm[2] = (dir[2] >= 0) ? 1 : -1;
   if (safe < 1E-6)
      return;
   // check X facettes
   Double_t distx = 0.5 * (fDx1 + fDx2) - fx * point[2];
   if (distx >= 0) {
      safe = TMath::Abs(distx - TMath::Abs(point[0])) * calf;
      if (safe < safemin) {
         safemin = safe;
         norm[0] = (point[0] > 0) ? calf : (-calf);
         norm[1] = 0;
         norm[2] = calf * fx;
         Double_t dot = norm[0] * dir[0] + norm[1] * dir[1] + norm[2] * dir[2];
         if (dot < 0) {
            norm[0] = -norm[0];
            norm[2] = -norm[2];
         }
         if (safe < 1E-6)
            return;
      }
   }
   // check Y facettes
   safe = TMath::Abs(fDy - TMath::Abs(point[1]));
   if (safe < safemin) {
      norm[0] = norm[2] = 0;
      norm[1] = (dir[1] >= 0) ? 1 : -1;
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// test if point is inside this shape
/// check Z range
 
Bool_t TGeoTrd1::Contains(const Double_t *point) const
{
   if (TMath::Abs(point[2]) > fDz)
      return kFALSE;
   // then y
   if (TMath::Abs(point[1]) > fDy)
      return kFALSE;
   // then x
   Double_t dx = 0.5 * (fDx2 * (point[2] + fDz) + fDx1 * (fDz - point[2])) / fDz;
   if (TMath::Abs(point[0]) > dx)
      return kFALSE;
   return kTRUE;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from inside point to surface of the trd1
/// Boundary safe algorithm.
 
Double_t
TGeoTrd1::DistFromInside(const Double_t *point, const Double_t *dir, Int_t iact, Double_t step, Double_t *safe) const
{
   if (iact < 3 && safe) {
      // compute safe distance
      *safe = Safety(point, kTRUE);
      if (iact == 0)
         return TGeoShape::Big();
      if (iact == 1 && step < *safe)
         return TGeoShape::Big();
   }
 
   //--- Compute safety first
   Double_t fx = 0.5 * (fDx1 - fDx2) / fDz;
   Double_t cn;
   Double_t distx = 0.5 * (fDx1 + fDx2) - fx * point[2];
   //--- Compute distance to this shape
   // first check if Z facettes are crossed
   Double_t dist[3];
   for (Int_t i = 0; i < 3; i++)
      dist[i] = TGeoShape::Big();
   if (dir[2] < 0) {
      dist[0] = -(point[2] + fDz) / dir[2];
   } else if (dir[2] > 0) {
      dist[0] = (fDz - point[2]) / dir[2];
   }
   if (dist[0] <= 0)
      return 0.0;
   // now check X facettes
   cn = -dir[0] + fx * dir[2];
   if (cn > 0) {
      dist[1] = point[0] + distx;
      if (dist[1] <= 0)
         return 0.0;
      dist[1] /= cn;
   }
   cn = dir[0] + fx * dir[2];
   if (cn > 0) {
      Double_t s = distx - point[0];
      if (s <= 0)
         return 0.0;
      s /= cn;
      if (s < dist[1])
         dist[1] = s;
   }
   // now check Y facettes
   if (dir[1] < 0) {
      dist[2] = -(point[1] + fDy) / dir[1];
   } else if (dir[1] > 0) {
      dist[2] = (fDy - point[1]) / dir[1];
   }
   if (dist[2] <= 0)
      return 0.0;
   return dist[TMath::LocMin(3, dist)];
}
 
////////////////////////////////////////////////////////////////////////////////
/// get the most visible corner from outside point and the normals
 
void TGeoTrd1::GetVisibleCorner(const Double_t *point, Double_t *vertex, Double_t *normals) const
{
   Double_t fx = 0.5 * (fDx1 - fDx2) / fDz;
   Double_t calf = 1. / TMath::Sqrt(1.0 + fx * fx);
   Double_t salf = calf * fx;
   // check visibility of X faces
   Double_t distx = 0.5 * (fDx1 + fDx2) - fx * point[2];
   memset(normals, 0, 9 * sizeof(Double_t));
   TGeoTrd1 *trd1 = (TGeoTrd1 *)this;
   if (point[0] > distx) {
      // hi x face visible
      trd1->SetShapeBit(kGeoVisX);
      normals[0] = calf;
      normals[2] = salf;
   } else {
      trd1->SetShapeBit(kGeoVisX, kFALSE);
      normals[0] = -calf;
      normals[2] = salf;
   }
   if (point[1] > fDy) {
      // hi y face visible
      trd1->SetShapeBit(kGeoVisY);
      normals[4] = 1;
   } else {
      trd1->SetShapeBit(kGeoVisY, kFALSE);
      normals[4] = -1;
   }
   if (point[2] > fDz) {
      // hi z face visible
      trd1->SetShapeBit(kGeoVisZ);
      normals[8] = 1;
   } else {
      trd1->SetShapeBit(kGeoVisZ, kFALSE);
      normals[8] = -1;
   }
   SetVertex(vertex);
}
 
////////////////////////////////////////////////////////////////////////////////
/// get the opposite corner of the intersected face
 
void TGeoTrd1::GetOppositeCorner(const Double_t * /*point*/, Int_t inorm, Double_t *vertex, Double_t *normals) const
{
   TGeoTrd1 *trd1 = (TGeoTrd1 *)this;
   if (inorm != 0) {
      // change x face
      trd1->SetShapeBit(kGeoVisX, !TestShapeBit(kGeoVisX));
      normals[0] = -normals[0];
   }
   if (inorm != 1) {
      // change y face
      trd1->SetShapeBit(kGeoVisY, !TestShapeBit(kGeoVisY));
      normals[4] = -normals[4];
   }
   if (inorm != 2) {
      // hi z face visible
      trd1->SetShapeBit(kGeoVisZ, !TestShapeBit(kGeoVisZ));
      normals[8] = -normals[8];
   }
   SetVertex(vertex);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from outside point to surface of the trd1
/// Boundary safe algorithm
 
Double_t
TGeoTrd1::DistFromOutside(const Double_t *point, const Double_t *dir, Int_t iact, Double_t step, Double_t *safe) const
{
   if (iact < 3 && safe) {
      // compute safe distance
      *safe = Safety(point, kFALSE);
      if (iact == 0)
         return TGeoShape::Big();
      if (iact == 1 && step < *safe)
         return TGeoShape::Big();
   }
   // find a visible face
   Double_t xnew, ynew, znew;
   Double_t fx = 0.5 * (fDx1 - fDx2) / fDz;
   Double_t cn;
   Double_t distx = 0.5 * (fDx1 + fDx2) - fx * point[2];
   Bool_t in = kTRUE;
   Double_t safx = distx - TMath::Abs(point[0]);
   Double_t safy = fDy - TMath::Abs(point[1]);
   Double_t safz = fDz - TMath::Abs(point[2]);
 
   //--- Compute distance to this shape
   // first check if Z facettes are crossed
   if (point[2] <= -fDz) {
      if (dir[2] <= 0)
         return TGeoShape::Big();
      in = kFALSE;
      Double_t snxt = -(fDz + point[2]) / dir[2];
      // find extrapolated X and Y
      xnew = point[0] + snxt * dir[0];
      if (TMath::Abs(xnew) <= fDx1) {
         ynew = point[1] + snxt * dir[1];
         if (TMath::Abs(ynew) <= fDy)
            return snxt;
      }
   } else if (point[2] >= fDz) {
      if (dir[2] >= 0)
         return TGeoShape::Big();
      in = kFALSE;
      Double_t snxt = (fDz - point[2]) / dir[2];
      // find extrapolated X and Y
      xnew = point[0] + snxt * dir[0];
      if (TMath::Abs(xnew) <= fDx2) {
         ynew = point[1] + snxt * dir[1];
         if (TMath::Abs(ynew) <= fDy)
            return snxt;
      }
   }
   // check if X facettes are crossed
   if (point[0] <= -distx) {
      cn = -dir[0] + fx * dir[2];
      if (cn >= 0)
         return TGeoShape::Big();
      in = kFALSE;
      Double_t snxt = (point[0] + distx) / cn;
      // find extrapolated Y and Z
      ynew = point[1] + snxt * dir[1];
      if (TMath::Abs(ynew) <= fDy) {
         znew = point[2] + snxt * dir[2];
         if (TMath::Abs(znew) <= fDz)
            return snxt;
      }
   }
   if (point[0] >= distx) {
      cn = dir[0] + fx * dir[2];
      if (cn >= 0)
         return TGeoShape::Big();
      in = kFALSE;
      Double_t snxt = (distx - point[0]) / cn;
      // find extrapolated Y and Z
      ynew = point[1] + snxt * dir[1];
      if (TMath::Abs(ynew) < fDy) {
         znew = point[2] + snxt * dir[2];
         if (TMath::Abs(znew) < fDz)
            return snxt;
      }
   }
   // finally check Y facettes
   if (point[1] <= -fDy) {
      cn = -dir[1];
      if (cn >= 0)
         return TGeoShape::Big();
      in = kFALSE;
      Double_t snxt = (point[1] + fDy) / cn;
      // find extrapolated X and Z
      znew = point[2] + snxt * dir[2];
      if (TMath::Abs(znew) < fDz) {
         xnew = point[0] + snxt * dir[0];
         Double_t dx = 0.5 * (fDx1 + fDx2) - fx * znew;
         if (TMath::Abs(xnew) < dx)
            return snxt;
      }
   } else if (point[1] >= fDy) {
      cn = dir[1];
      if (cn >= 0)
         return TGeoShape::Big();
      in = kFALSE;
      Double_t snxt = (fDy - point[1]) / cn;
      // find extrapolated X and Z
      znew = point[2] + snxt * dir[2];
      if (TMath::Abs(znew) < fDz) {
         xnew = point[0] + snxt * dir[0];
         Double_t dx = 0.5 * (fDx1 + fDx2) - fx * znew;
         if (TMath::Abs(xnew) < dx)
            return snxt;
      }
   }
   if (!in)
      return TGeoShape::Big();
   // Point actually inside
   if (safz < safx && safz < safy) {
      if (point[2] * dir[2] >= 0)
         return TGeoShape::Big();
      return 0.0;
   }
   if (safy < safx) {
      if (point[1] * dir[1] >= 0)
         return TGeoShape::Big();
      return 0.0;
   }
   cn = TMath::Sign(1.0, point[0]) * dir[0] + fx * dir[2];
   if (cn >= 0)
      return TGeoShape::Big();
   return 0.0;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Divide this trd1 shape belonging to volume "voldiv" into ndiv volumes
/// called divname, from start position with the given step. Returns pointer
/// to created division cell volume in case of Y divisions. For Z divisions just
/// return the pointer to the volume to be divided. In case a wrong
/// division axis is supplied, returns pointer to volume that was divided.
 
TGeoVolume *
TGeoTrd1::Divide(TGeoVolume *voldiv, const char *divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step)
{
   TGeoShape *shape;          //--- shape to be created
   TGeoVolume *vol;           //--- division volume to be created
   TGeoVolumeMulti *vmulti;   //--- generic divided volume
   TGeoPatternFinder *finder; //--- finder to be attached
   TString opt = "";          //--- option to be attached
   Double_t zmin, zmax, dx1n, dx2n;
   Int_t id;
   Double_t end = start + ndiv * step;
   switch (iaxis) {
   case 1: Warning("Divide", "dividing a Trd1 on X not implemented"); return 0;
   case 2:
      finder = new TGeoPatternY(voldiv, ndiv, start, end);
      voldiv->SetFinder(finder);
      finder->SetDivIndex(voldiv->GetNdaughters());
      shape = new TGeoTrd1(fDx1, fDx2, step / 2, fDz);
      vol = new TGeoVolume(divname, shape, voldiv->GetMedium());
      vmulti = gGeoManager->MakeVolumeMulti(divname, voldiv->GetMedium());
      vmulti->AddVolume(vol);
      opt = "Y";
      for (id = 0; id < ndiv; id++) {
         voldiv->AddNodeOffset(vol, id, start + step / 2 + id * step, opt.Data());
         ((TGeoNodeOffset *)voldiv->GetNodes()->At(voldiv->GetNdaughters() - 1))->SetFinder(finder);
      }
      return vmulti;
   case 3:
      finder = new TGeoPatternZ(voldiv, ndiv, start, end);
      voldiv->SetFinder(finder);
      finder->SetDivIndex(voldiv->GetNdaughters());
      vmulti = gGeoManager->MakeVolumeMulti(divname, voldiv->GetMedium());
      for (id = 0; id < ndiv; id++) {
         zmin = start + id * step;
         zmax = start + (id + 1) * step;
         dx1n = 0.5 * (fDx1 * (fDz - zmin) + fDx2 * (fDz + zmin)) / fDz;
         dx2n = 0.5 * (fDx1 * (fDz - zmax) + fDx2 * (fDz + zmax)) / fDz;
         shape = new TGeoTrd1(dx1n, dx2n, fDy, step / 2.);
         vol = new TGeoVolume(divname, shape, voldiv->GetMedium());
         vmulti->AddVolume(vol);
         opt = "Z";
         voldiv->AddNodeOffset(vol, id, start + step / 2 + id * step, opt.Data());
         ((TGeoNodeOffset *)voldiv->GetNodes()->At(voldiv->GetNdaughters() - 1))->SetFinder(finder);
      }
      return vmulti;
   default: Error("Divide", "Wrong axis type for division"); return 0;
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// Get range of shape for a given axis.
 
Double_t TGeoTrd1::GetAxisRange(Int_t iaxis, Double_t &xlo, Double_t &xhi) const
{
   xlo = 0;
   xhi = 0;
   Double_t dx = 0;
   switch (iaxis) {
   case 2:
      xlo = -fDy;
      xhi = fDy;
      dx = xhi - xlo;
      return dx;
   case 3:
      xlo = -fDz;
      xhi = fDz;
      dx = xhi - xlo;
      return dx;
   }
   return dx;
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fill vector param[4] with the bounding cylinder parameters. The order
/// is the following : Rmin, Rmax, Phi1, Phi2
 
void TGeoTrd1::GetBoundingCylinder(Double_t *param) const
{
   TGeoBBox::GetBoundingCylinder(param);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Fills real parameters of a positioned box inside this. Returns 0 if successful.
 
Int_t TGeoTrd1::GetFittingBox(const TGeoBBox *parambox, TGeoMatrix *mat, Double_t &dx, Double_t &dy, Double_t &dz) const
{
   dx = dy = dz = 0;
   if (mat->IsRotation()) {
      Error("GetFittingBox", "cannot handle parametrized rotated volumes");
      return 1; // ### rotation not accepted ###
   }
   //--> translate the origin of the parametrized box to the frame of this box.
   Double_t origin[3];
   mat->LocalToMaster(parambox->GetOrigin(), origin);
   if (!Contains(origin)) {
      Error("GetFittingBox", "wrong matrix - parametrized box is outside this");
      return 1; // ### wrong matrix ###
   }
   //--> now we have to get the valid range for all parametrized axis
   Double_t dd[3];
   dd[0] = parambox->GetDX();
   dd[1] = parambox->GetDY();
   dd[2] = parambox->GetDZ();
   //-> check if Z range is fixed
   if (dd[2] < 0) {
      dd[2] = TMath::Min(origin[2] + fDz, fDz - origin[2]);
      if (dd[2] < 0) {
         Error("GetFittingBox", "wrong matrix");
         return 1;
      }
   }
   //-> check if Y range is fixed
   if (dd[1] < 0) {
      dd[1] = TMath::Min(origin[1] + fDy, fDy - origin[1]);
      if (dd[1] < 0) {
         Error("GetFittingBox", "wrong matrix");
         return 1;
      }
   }
   if (dd[0] >= 0) {
      dx = dd[0];
      dy = dd[1];
      dz = dd[2];
      return 0;
   }
   //-> check now range at Z = origin[2] +/- dd[2]
   Double_t fx = 0.5 * (fDx1 - fDx2) / fDz;
   Double_t dx0 = 0.5 * (fDx1 + fDx2);
   Double_t z = origin[2] - dd[2];
   dd[0] = dx0 - fx * z - origin[0];
   z = origin[2] + dd[2];
   dd[0] = TMath::Min(dd[0], dx0 - fx * z - origin[0]);
   if (dd[0] < 0) {
      Error("GetFittingBox", "wrong matrix");
      return 1;
   }
   dx = dd[0];
   dy = dd[1];
   dz = dd[2];
   return 0;
}
 
////////////////////////////////////////////////////////////////////////////////
/// in case shape has some negative parameters, these has to be computed
/// in order to fit the mother
 
TGeoShape *TGeoTrd1::GetMakeRuntimeShape(TGeoShape *mother, TGeoMatrix * /*mat*/) const
{
   if (!TestShapeBit(kGeoRunTimeShape))
      return 0;
   if (!mother->TestShapeBit(kGeoTrd1)) {
      Error("GetMakeRuntimeShape", "invalid mother");
      return 0;
   }
   Double_t dx1, dx2, dy, dz;
   if (fDx1 < 0)
      dx1 = ((TGeoTrd1 *)mother)->GetDx1();
   else
      dx1 = fDx1;
   if (fDx2 < 0)
      dx2 = ((TGeoTrd1 *)mother)->GetDx2();
   else
      dx2 = fDx2;
   if (fDy < 0)
      dy = ((TGeoTrd1 *)mother)->GetDy();
   else
      dy = fDy;
   if (fDz < 0)
      dz = ((TGeoTrd1 *)mother)->GetDz();
   else
      dz = fDz;
 
   return (new TGeoTrd1(dx1, dx2, dy, dz));
}
 
////////////////////////////////////////////////////////////////////////////////
/// print shape parameters
 
void TGeoTrd1::InspectShape() const
{
   printf("*** Shape %s: TGeoTrd1 ***\n", GetName());
   printf("    dx1 = %11.5f\n", fDx1);
   printf("    dx2 = %11.5f\n", fDx2);
   printf("    dy  = %11.5f\n", fDy);
   printf("    dz  = %11.5f\n", fDz);
   printf(" Bounding box:\n");
   TGeoBBox::InspectShape();
}
 
////////////////////////////////////////////////////////////////////////////////
/// computes the closest distance from given point to this shape, according
/// to option. The matching point on the shape is stored in spoint.
 
Double_t TGeoTrd1::Safety(const Double_t *point, Bool_t in) const
{
   Double_t saf[3];
   //--- Compute safety first
   // check Z facettes
   saf[0] = fDz - TMath::Abs(point[2]);
   Double_t fx = 0.5 * (fDx1 - fDx2) / fDz;
   Double_t calf = 1. / TMath::Sqrt(1.0 + fx * fx);
   // check X facettes
   Double_t distx = 0.5 * (fDx1 + fDx2) - fx * point[2];
   if (distx < 0)
      saf[1] = TGeoShape::Big();
   else
      saf[1] = (distx - TMath::Abs(point[0])) * calf;
   // check Y facettes
   saf[2] = fDy - TMath::Abs(point[1]);
   if (in)
      return saf[TMath::LocMin(3, saf)];
   for (Int_t i = 0; i < 3; i++)
      saf[i] = -saf[i];
   return saf[TMath::LocMax(3, saf)];
}
 
////////////////////////////////////////////////////////////////////////////////
/// Save a primitive as a C++ statement(s) on output stream "out".
 
void TGeoTrd1::SavePrimitive(std::ostream &out, Option_t * /*option*/ /*= ""*/)
{
   if (TObject::TestBit(kGeoSavePrimitive))
      return;
   out << "   // Shape: " << GetName() << " type: " << ClassName() << std::endl;
   out << "   dx1 = " << fDx1 << ";" << std::endl;
   out << "   dx2 = " << fDx2 << ";" << std::endl;
   out << "   dy  = " << fDy << ";" << std::endl;
   out << "   dz  = " << fDZ << ";" << std::endl;
   out << "   TGeoShape *" << GetPointerName() << " = new TGeoTrd1(\"" << GetName() << "\", dx1,dx2,dy,dz);"
       << std::endl;
   TObject::SetBit(TGeoShape::kGeoSavePrimitive);
}
 
////////////////////////////////////////////////////////////////////////////////
/// set trd1 params in one step :
 
void TGeoTrd1::SetDimensions(Double_t *param)
{
   fDx1 = param[0];
   fDx2 = param[1];
   fDy = param[2];
   fDz = param[3];
   ComputeBBox();
}
 
////////////////////////////////////////////////////////////////////////////////
/// set vertex of a corner according to visibility flags
 
void TGeoTrd1::SetVertex(Double_t *vertex) const
{
   if (TestShapeBit(kGeoVisX)) {
      if (TestShapeBit(kGeoVisZ)) {
         vertex[0] = fDx2;
         vertex[2] = fDz;
         vertex[1] = (TestShapeBit(kGeoVisY)) ? fDy : -fDy;
      } else {
         vertex[0] = fDx1;
         vertex[2] = -fDz;
         vertex[1] = (TestShapeBit(kGeoVisY)) ? fDy : -fDy;
      }
   } else {
      if (TestShapeBit(kGeoVisZ)) {
         vertex[0] = -fDx2;
         vertex[2] = fDz;
         vertex[1] = (TestShapeBit(kGeoVisY)) ? fDy : -fDy;
      } else {
         vertex[0] = -fDx1;
         vertex[2] = -fDz;
         vertex[1] = (TestShapeBit(kGeoVisY)) ? fDy : -fDy;
      }
   }
}
 
////////////////////////////////////////////////////////////////////////////////
/// create arb8 mesh points
 
void TGeoTrd1::SetPoints(Double_t *points) const
{
   if (!points)
      return;
   points[0] = -fDx1;
   points[1] = -fDy;
   points[2] = -fDz;
   points[3] = -fDx1;
   points[4] = fDy;
   points[5] = -fDz;
   points[6] = fDx1;
   points[7] = fDy;
   points[8] = -fDz;
   points[9] = fDx1;
   points[10] = -fDy;
   points[11] = -fDz;
   points[12] = -fDx2;
   points[13] = -fDy;
   points[14] = fDz;
   points[15] = -fDx2;
   points[16] = fDy;
   points[17] = fDz;
   points[18] = fDx2;
   points[19] = fDy;
   points[20] = fDz;
   points[21] = fDx2;
   points[22] = -fDy;
   points[23] = fDz;
}
 
////////////////////////////////////////////////////////////////////////////////
/// create arb8 mesh points
 
void TGeoTrd1::SetPoints(Float_t *points) const
{
   if (!points)
      return;
   points[0] = -fDx1;
   points[1] = -fDy;
   points[2] = -fDz;
   points[3] = -fDx1;
   points[4] = fDy;
   points[5] = -fDz;
   points[6] = fDx1;
   points[7] = fDy;
   points[8] = -fDz;
   points[9] = fDx1;
   points[10] = -fDy;
   points[11] = -fDz;
   points[12] = -fDx2;
   points[13] = -fDy;
   points[14] = fDz;
   points[15] = -fDx2;
   points[16] = fDy;
   points[17] = fDz;
   points[18] = fDx2;
   points[19] = fDy;
   points[20] = fDz;
   points[21] = fDx2;
   points[22] = -fDy;
   points[23] = fDz;
}
 
////////////////////////////////////////////////////////////////////////////////
/// fill size of this 3-D object
 
void TGeoTrd1::Sizeof3D() const
{
   TGeoBBox::Sizeof3D();
}
 
////////////////////////////////////////////////////////////////////////////////
/// Check the inside status for each of the points in the array.
/// Input: Array of point coordinates + vector size
/// Output: Array of Booleans for the inside of each point
 
void TGeoTrd1::Contains_v(const Double_t *points, Bool_t *inside, Int_t vecsize) const
{
   for (Int_t i = 0; i < vecsize; i++)
      inside[i] = Contains(&points[3 * i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute the normal for an array o points so that norm.dot.dir is positive
/// Input: Arrays of point coordinates and directions + vector size
/// Output: Array of normal directions
 
void TGeoTrd1::ComputeNormal_v(const Double_t *points, const Double_t *dirs, Double_t *norms, Int_t vecsize)
{
   for (Int_t i = 0; i < vecsize; i++)
      ComputeNormal(&points[3 * i], &dirs[3 * i], &norms[3 * i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from array of input points having directions specified by dirs. Store output in dists
 
void TGeoTrd1::DistFromInside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize,
                                Double_t *step) const
{
   for (Int_t i = 0; i < vecsize; i++)
      dists[i] = DistFromInside(&points[3 * i], &dirs[3 * i], 3, step[i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute distance from array of input points having directions specified by dirs. Store output in dists
 
void TGeoTrd1::DistFromOutside_v(const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize,
                                 Double_t *step) const
{
   for (Int_t i = 0; i < vecsize; i++)
      dists[i] = DistFromOutside(&points[3 * i], &dirs[3 * i], 3, step[i]);
}
 
////////////////////////////////////////////////////////////////////////////////
/// Compute safe distance from each of the points in the input array.
/// Input: Array of point coordinates, array of statuses for these points, size of the arrays
/// Output: Safety values
 
void TGeoTrd1::Safety_v(const Double_t *points, const Bool_t *inside, Double_t *safe, Int_t vecsize) const
{
   for (Int_t i = 0; i < vecsize; i++)
      safe[i] = Safety(&points[3 * i], inside[i]);
}