Allows to perform, explore and compare various fits.

To display the new Fit panel interface right click on a histogram or a graph to pop up the context menu and then select the menu entry 'Fit Panel'.

"General" Tab

The first set of GUI elements is related to the function choice and settings. The status bar on the bottom provides information about the current minimization settings using the following abbreviations: LIB - shows the current choice between Minuit/Minuit2/Fumili MIGRAD or FUMILI points to the current minimization method in use. Itr: - shows the maximum number of iterations nnnn set for the fit. Prn: - can be DEF/VER/QT and shows the current print option in use.

"Predefined" combo box - contains a list of predefined functions in ROOT. The default one is Gaussian.

"Operation" radio button group defines selected operational mode between functions: NOP - no operation (default); ADD - addition CONV - convolution (will be implemented in the future).

Users can enter the function expression in a text entry field. The entered string is checked after Enter key was pressed. An error message shows up if the string is not accepted. The current prototype is limited and users have no freedom to enter file/user function names in this field.

"Set Parameters" button opens a dialog for parameters settings.

"Fit Settings" provides user interface elements related to the fitter. Currently there are two method choices: Chi-square and Binned Likelihood.

"Linear Fit" check button sets the use of Linear fitter is it is selected. Otherwise the option 'F' is applied if polN is selected. "Robust" number entry sets the robust value when fitting graphs. "No Chi-square" check button sets ON/OFF option 'C' - do not calculate Chi-square (for Linear fitter).

Fit options: "Integral" check button switch ON/OFF option 'I' - use integral of function instead of value in bin center. "Best Errors" sets ON/OFF option 'E' - better errors estimation using Minos technique. "All weights = 1" sets ON/OFF option 'W' - all weights set to 1, excluding empty bins and ignoring error bars. "Empty bins, weights=1" sets ON/OFF option 'WW' - all weights equal to 1, including empty bins, error bars ignored. "Use range" sets ON/OFF option 'R' - fit only data within the specified function range with the slider. "Improve fit results" sets ON/OFF option 'M' - after minimum is found, search for a new one. "Add to list" sets On/Off option '+'- add function to the list without deleting the previous.

Draw options: "SAME" sets On/Off function drawing on the same pad. "No drawing" sets On/Off option '0'- do not draw function graphics. "Do not store/draw" sets On/Off option 'N'- do not store the function, do not draw it.

Sliders settings are used if option 'R' - use range is active. Users can change min/max values by pressing the left mouse button near to the left/right slider edges. It is possible o change both values simultaneously by pressing the left mouse button near to its center and moving it to a new desire position.

"Minimization" Tab

"Library" group allows you to use Minuit, Minuit2 or Fumili minimization packages for your fit. "Minuit" - the popular Minuit minimization package. "Minuit2" - a new object-oriented implementation of Minuit in C++. "Fumili" - the popular Fumili minimization package.

"Method" group has currently restricted functionality. "MIGRAD" method is available for Minuit and Minuit2 "FUMILI" method is available for Fumili and Minuit2 "SIMPLEX" method is disabled (will come with the new fitter design)

"Minimization Settings' group allows users to set values for: "Error definition" - between 0.0 and 100.0 (default is 1.0). "Maximum tolerance" - the fit relative precision in use. "Maximum number of iterations" - default is 5000. Print options: "Default" - between Verbose and Quiet. "Verbose" - prints results after each iteration. "Quiet" - no fit information is printed.

Fit button - performs a fit. Reset - resets all GUI elements and related fit settings to the default ones. Close - closes this window.

Definition at line 54 of file TFitEditor.h.

Classes
struct	FuncParamData_t

Public Types
typedef std::vector< FuncParamData_t >	FuncParams_t

Public Types inherited from TGWindow
enum	EEditMode { kEditEnable = 0 , kEditDisable = (1ULL << ( 0 )) , kEditDisableEvents = (1ULL << ( 1 )) , kEditDisableGrab = (1ULL << ( 2 )) , kEditDisableLayout = (1ULL << ( 3 )) , kEditDisableResize = (1ULL << ( 4 )) , kEditDisableHeight = (1ULL << ( 5 )) , kEditDisableWidth = (1ULL << ( 6 )) , kEditDisableBtnEnable = (1ULL << ( 7 )) , kEditDisableKeyEnable = (1ULL << ( 8 )) }

enum	EStatusBits { kIsHtmlView = (1ULL << ( 14 )) }

Public Types inherited from TObject
enum	{ kIsOnHeap = 0x01000000 , kNotDeleted = 0x02000000 , kZombie = 0x04000000 , kInconsistent = 0x08000000 , kBitMask = 0x00ffffff }

enum	{ kSingleKey = (1ULL << ( 0 )) , kOverwrite = (1ULL << ( 1 )) , kWriteDelete = (1ULL << ( 2 )) }

enum	EDeprecatedStatusBits { kObjInCanvas = (1ULL << ( 3 )) }

enum	EStatusBits { kCanDelete = (1ULL << ( 0 )) , kMustCleanup = (1ULL << ( 3 )) , kIsReferenced = (1ULL << ( 4 )) , kHasUUID = (1ULL << ( 5 )) , kCannotPick = (1ULL << ( 6 )) , kNoContextMenu = (1ULL << ( 8 )) , kInvalidObject = (1ULL << ( 13 )) }

Public Member Functions
	TFitEditor (TVirtualPad pad, TObject obj)
	Constructor of fit editor.

virtual	~TFitEditor ()
	Fit editor destructor.

virtual void	CloseWindow ()
	Close fit panel window.

virtual void	ConnectSlots ()
	Connect GUI signals to fit panel slots.

virtual void	DisconnectSlots ()
	Disconnect GUI signals from fit panel slots.

virtual void	DoAddition (Bool_t on)
	Slot connected to addition of predefined functions.

virtual void	DoAdvancedOptions ()
	Slot connected to advanced option button (opens a dialog).

virtual void	DoAllWeights1 ()
	Slot connected to 'set all weights to 1' setting.

virtual void	DoClose ()
	Close the fit panel.

virtual void	DoConvolution (Bool_t on)
	Slot connected to addition of predefined functions.

virtual void	DoDataSet (Int_t sel)
	Selects the data set to be fitted.

virtual void	DoEmptyBinsAllWeights1 ()
	Slot connected to 'include emtry bins and forse all weights to 1' setting.

virtual void	DoEnteredFunction ()
	Slot connected to entered function in text entry.

virtual void	DoFit ()
	Perform a fit with current parameters' settings.

virtual void	DoFunction (Int_t sel)
	Slot connected to predefined fit function settings.

virtual void	DoLibrary (Bool_t on)
	Set selected minimization library in use.

virtual void	DoLinearFit ()
	Slot connected to linear fit settings.

virtual void	DoMaxIterations ()
	Set the maximum number of iterations.

virtual void	DoMinMethod (Int_t)
	Set selected minimization method in use.

virtual void	DoNoChi2 ()
	Slot connected to 'no chi2' option settings.

virtual void	DoNormAddition (Bool_t on)
	Slot connected to addition of predefined functions.

virtual void	DoNoSelection ()
	Slot called when users close a TCanvas or when the user select no object.

virtual void	DoNoStoreDrawing ()
	Slot connected to 'no storing, no drawing' settings.

virtual void	DoNumericSliderXChanged ()
	Sincronize the numeric sliders with the graphical one.

virtual void	DoNumericSliderYChanged ()
	syncronize the numeric slider with the graphical one.

virtual void	DoPrintOpt (Bool_t on)
	Slot connected to print option settings.

virtual void	DoReset ()
	Reset all fit parameters.

virtual void	DoRobustFit ()
	Slot connected to 'robust fitting' option settings.

virtual void	DoSetParameters ()
	Open set parameters dialog.

virtual void	DoSliderXMoved ()
	Slot connected to range settings on x-axis.

virtual void	DoSliderYMoved ()
	Slot connected to range settings on y-axis.

virtual void	DoSliderZMoved ()
	Slot connected to range settings on z-axis.

virtual void	DoUpdate ()
	Easy here!

virtual void	DoUseFuncRange ()

virtual void	DoUserDialog ()
	Open a dialog for getting a user defined method.

void	FillFunctionList (Int_t selected=-1)
	Fills the list of functions depending on the type of fit selected.

void	FillMinMethodList (Int_t selected=-1)
	Fills the list of methods depending on the minimization library selected.

virtual Option_t *	GetDrawOption () const
	Get draw options of the selected object.

TList *	GetListOfFittingFunctions (TObject *obj=nullptr)

virtual void	Hide ()
	Hide the fit panel and set it to non-active state.

virtual void	RecursiveRemove (TObject *obj)
	When obj is deleted, clear fFitObject if fFitObject = obj.

virtual void	SetFitObject (TVirtualPad pad, TObject obj, Int_t event)
	Slot called when the user clicks on an object inside a canvas.

virtual void	SetFunction (const char *function)
	Set the function to be used in performed fit.

Bool_t	SetObjectType (TObject *obj)
	Check whether the object suitable for fitting and set its type, dimension and method combo box accordingly.

virtual void	Show (TVirtualPad pad, TObject obj)
	Show the fit panel (possible only via context menu).

void	ShowObjectName (TObject *obj)
	Show object name on the top.

virtual void	Terminate ()
	Called to delete the fit panel.

void	UpdateGUI ()
	Set the fit panel GUI according to the selected object.

Public Member Functions inherited from TGMainFrame
	TGMainFrame (const TGWindow *p=nullptr, UInt_t w=1, UInt_t h=1, UInt_t options=kVerticalFrame)
	Create a top level main frame.

virtual	~TGMainFrame ()
	TGMainFrame destructor.

virtual Bool_t	BindKey (const TGWindow *w, Int_t keycode, Int_t modifier) const
	Bind key to a window.

void	DontCallClose ()
	Typically call this method in the slot connected to the CloseWindow() signal to prevent the calling of the default or any derived CloseWindow() methods to prevent premature or double deletion of this window.

TList *	GetBindList () const

void	GetClassHints (const char &className, const char &resourceName) const

const char *	GetIconName () const override
	Returns mime type name of object.

const char *	GetIconPixmap () const

void	GetMWMHints (UInt_t &value, UInt_t &funcs, UInt_t &input) const

const char *	GetWindowName () const

void	GetWMPosition (Int_t &x, Int_t &y) const

void	GetWMSize (UInt_t &w, UInt_t &h) const

void	GetWMSizeHints (UInt_t &wmin, UInt_t &hmin, UInt_t &wmax, UInt_t &hmax, UInt_t &winc, UInt_t &hinc) const

EInitialState	GetWMState () const

Bool_t	HandleButton (Event_t *event) override
	Handle mouse button events.

Bool_t	HandleClientMessage (Event_t *event) override
	Handle client messages sent to this frame.

Bool_t	HandleKey (Event_t *event) override
	Handle keyboard events.

Bool_t	HandleMotion (Event_t *event) override
	Handle mouse motion events.

Bool_t	HandleSelection (Event_t *event) override
	Handle primary selection event.

Bool_t	HandleSelectionRequest (Event_t *event) override
	Handle selection request event.

TClass *	IsA () const override

virtual void	RemoveBind (const TGWindow *w, Int_t keycode, Int_t modifier) const
	Remove key binding.

virtual Bool_t	SaveFrameAsCodeOrImage ()
	Opens dialog window allowing user to save the frame contents as a ROOT macro or as an image.

virtual Bool_t	SaveFrameAsCodeOrImage (const TString &fileName)
	Saves the frame contents as a ROOT macro or as an image, depending on the extension of the fileName argument.

void	SavePrimitive (std::ostream &out, Option_t *option="") override
	Save a main frame widget as a C++ statement(s) on output stream out.

virtual void	SaveSource (const char filename="Rootappl.C", Option_t option="")
	Save the GUI main frame widget in a C++ macro file.

virtual void	SendCloseMessage ()
	Send close message to self.

void	SetClassHints (const char className, const char resourceName)
	Set the windows class and resource name.

void	SetIconName (const char *name)
	Set window icon name. This is typically done via the window manager.

void	SetIconPixmap (char **xpm_array)
	Set window icon by xpm array.

const TGPicture *	SetIconPixmap (const char *iconName)
	Set window icon pixmap by name.

void	SetMWMHints (UInt_t value, UInt_t funcs, UInt_t input)
	Set decoration style for MWM-compatible wm (mwm, ncdwm, fvwm?).

void	SetWindowName (const char *name=nullptr) override
	Set window name. This is typically done via the window manager.

void	SetWMPosition (Int_t x, Int_t y)
	Give the window manager a window position hint.

void	SetWMSize (UInt_t w, UInt_t h)
	Give the window manager a window size hint.

void	SetWMSizeHints (UInt_t wmin, UInt_t hmin, UInt_t wmax, UInt_t hmax, UInt_t winc, UInt_t hinc)
	Give the window manager minimum and maximum size hints.

void	SetWMState (EInitialState state)
	Set the initial state of the window. Either kNormalState or kIconicState.

void	Streamer (TBuffer &) override
	Stream an object of class TObject.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TGCompositeFrame
	TGCompositeFrame (const TGWindow *p=nullptr, UInt_t w=1, UInt_t h=1, UInt_t options=0, Pixel_t back=GetDefaultFrameBackground())
	Create a composite frame.

	TGCompositeFrame (TGClient c, Window_t id, const TGWindow parent=nullptr)
	Create a frame using an externally created window.

virtual	~TGCompositeFrame ()
	Delete a composite frame.

virtual void	AddFrame (TGFrame f, TGLayoutHints l=nullptr)
	Add frame to the composite frame using the specified layout hints.

void	ChangeOptions (UInt_t options) override
	Change composite frame options. Options is an OR of the EFrameTypes.

virtual void	ChangeSubframesBackground (Pixel_t back)
	Change background color for this frame and all subframes.

virtual void	Cleanup ()
	Cleanup and delete all objects contained in this composite frame.

virtual TGFrameElement *	FindFrameElement (TGFrame *f) const
	Find frame-element holding frame f.

UInt_t	GetDefaultHeight () const override

TGDimension	GetDefaultSize () const override
	std::cout << fWidth << "x" << fHeight << std::endl;

UInt_t	GetDefaultWidth () const override

TGFrame *	GetFrameFromPoint (Int_t x, Int_t y) override
	Get frame located at specified point.

virtual TGLayoutManager *	GetLayoutManager () const

virtual TList *	GetList () const

Int_t	GetState (TGFrame *f) const
	Get state of sub frame.

Bool_t	HandleCrossing (Event_t *) override

Bool_t	HandleDoubleClick (Event_t *) override

Bool_t	HandleDragDrop (TGFrame frame, Int_t x, Int_t y, TGLayoutHints lo) override
	Handle drop event.

Bool_t	HandleDragEnter (TGFrame *) override
	Handle drag enter event.

Bool_t	HandleDragLeave (TGFrame *) override
	Handle drag leave event.

Bool_t	HandleDragMotion (TGFrame *) override
	Handle drag motion event.

Bool_t	HandleFocusChange (Event_t *) override

virtual void	HideFrame (TGFrame *f)
	Hide sub frame.

Bool_t	IsArranged (TGFrame *f) const
	Get state of sub frame.

Bool_t	IsArranged (TGFrameElement *ptr) const

Bool_t	IsComposite () const override

Bool_t	IsEditable () const override
	Return kTRUE if frame is being edited.

Bool_t	IsLayoutBroken () const override

Bool_t	IsMapSubwindows () const override

Bool_t	IsVisible (TGFrame *f) const
	Get state of sub frame.

Bool_t	IsVisible (TGFrameElement *ptr) const

void	Layout () override
	Layout the elements of the composite frame.

void	MapSubwindows () override
	Map all sub windows that are part of the composite frame.

Int_t	MustCleanup () const override

void	Print (Option_t *option="") const override
	Print all frames in this composite frame.

Bool_t	ProcessMessage (Longptr_t, Longptr_t, Longptr_t) override

virtual void	RemoveAll ()
	Remove all frames from composite frame.

virtual void	RemoveFrame (TGFrame *f)
	Remove frame from composite frame.

virtual void	SavePrimitiveSubframes (std::ostream &out, Option_t *option="")
	Auxiliary protected method used to save subframes.

void	SetCleanup (Int_t mode=kLocalCleanup) override
	Turn on automatic cleanup of child frames in dtor.

void	SetEditable (Bool_t on=kTRUE) override
	Switch ON/OFF edit mode.

void	SetEditDisabled (UInt_t on=1) override
	Set edit disable flag for this frame and subframes.

void	SetLayoutBroken (Bool_t on=kTRUE) override
	Set broken layout. No Layout method is called.

virtual void	SetLayoutManager (TGLayoutManager *l)
	Set the layout manager for the composite frame.

void	SetMapSubwindows (Bool_t on) override

virtual void	ShowFrame (TGFrame *f)
	Show sub frame.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

virtual Bool_t	TranslateCoordinates (TGFrame *child, Int_t x, Int_t y, Int_t &fx, Int_t &fy)
	Translate coordinates to child frame.

Public Member Functions inherited from TGFrame
	TGFrame (const TGWindow *p=nullptr, UInt_t w=1, UInt_t h=1, UInt_t options=0, Pixel_t back=GetDefaultFrameBackground())
	Create a TGFrame object. Options is an OR of the EFrameTypes.

	TGFrame (TGClient c, Window_t id, const TGWindow parent=nullptr)
	Create a frame using an externally created window.

virtual	~TGFrame ()
	Destructor.

virtual void	Activate (Bool_t)

void	AddInput (UInt_t emask)
	Add events specified in the emask to the events the frame should handle.

virtual void	ChangeBackground (Pixel_t back)
	Change frame background color.

Bool_t	Contains (Int_t x, Int_t y) const

void	Delete (Option_t *="") override
	Delete this object.

virtual void	DeleteWindow ()
	Delete window.

virtual void	DrawBorder ()
	Draw frame border.

void	DrawClass () const override
	Draw class inheritance tree of the class to which this object belongs.

TObject *	DrawClone (Option_t *="") const override
	Draw a clone of this object in the current selected pad with: `gROOT->SetSelectedPad(c1)`.

virtual void	DrawCopy (Handle_t, Int_t, Int_t)

void	Dump () const override
	Dump contents of object on stdout.

virtual Pixel_t	GetBackground () const

Int_t	GetBorderWidth () const

virtual TDNDData *	GetDNDData (Atom_t)

virtual Int_t	GetDragType () const
	Returns drag source type.

virtual Int_t	GetDropType () const
	Returns drop target type.

UInt_t	GetEventMask () const

virtual Pixel_t	GetForeground () const
	Return frame foreground color.

TGFrameElement *	GetFrameElement () const

UInt_t	GetHeight () const

UInt_t	GetMaxHeight () const

UInt_t	GetMaxWidth () const

UInt_t	GetMinHeight () const

UInt_t	GetMinWidth () const

virtual UInt_t	GetOptions () const

TGDimension	GetSize () const

UInt_t	GetWidth () const

Int_t	GetX () const

Int_t	GetY () const

virtual Bool_t	HandleColormapChange (Event_t *)

virtual Bool_t	HandleConfigureNotify (Event_t *event)
	This event is generated when the frame is resized.

virtual Bool_t	HandleDNDDrop (TDNDData *)

virtual Atom_t	HandleDNDEnter (Atom_t *)

virtual Bool_t	HandleDNDFinished ()

virtual Bool_t	HandleDNDLeave ()

virtual Atom_t	HandleDNDPosition (Int_t, Int_t, Atom_t, Int_t, Int_t)

Bool_t	HandleEvent (Event_t *event) override
	Handle all frame events.

virtual Bool_t	HandleSelectionClear (Event_t *)

void	Inspect () const override
	Dump contents of this object in a graphics canvas.

virtual Bool_t	IsActive () const

Bool_t	IsDNDSource () const

Bool_t	IsDNDTarget () const

Bool_t	IsEditable () const override

void	MapRaised () override
	map raised

void	MapSubwindows () override
	map sub windows

void	MapWindow () override
	map window

void	Move (Int_t x, Int_t y) override
	Move frame.

void	MoveResize (Int_t x, Int_t y, UInt_t w=0, UInt_t h=0) override
	Move and/or resize the frame.

void	Print (Option_t *option="") const override
	Print window id.

virtual void	ProcessedConfigure (Event_t *event)

virtual void	ProcessedEvent (Event_t *event)

virtual void	ReallyDelete ()

void	RemoveInput (UInt_t emask)
	Remove events specified in emask from the events the frame should handle.

void	ReparentWindow (const TGWindow *p, Int_t x=0, Int_t y=0) override
	Reparent window, make p the new parent and position the window at position (x,y) in new parent.

virtual void	Resize (TGDimension size)
	Resize the frame.

void	Resize (UInt_t w=0, UInt_t h=0) override
	Resize the frame.

void	SaveUserColor (std::ostream &out, Option_t *)
	Save a user color in a C++ macro file - used in SavePrimitive().

virtual void	SendMessage (const TGWindow *w, Longptr_t msg, Longptr_t parm1, Longptr_t parm2)
	Send message (i.e.

void	SetBackgroundColor (Pixel_t back) override
	Set background color (override from TGWindow base class).

void	SetDNDSource (Bool_t onoff)

void	SetDNDTarget (Bool_t onoff)

virtual void	SetDragType (Int_t type)
	SetDragType.

void	SetDrawOption (Option_t *="") override
	Set drawing option for object.

virtual void	SetDropType (Int_t type)
	SetDropType.

void	SetEditable (Bool_t) override

virtual void	SetForegroundColor (Pixel_t)

void	SetFrameElement (TGFrameElement *fe)

virtual void	SetHeight (UInt_t h)

virtual void	SetMaxHeight (UInt_t h)

virtual void	SetMaxWidth (UInt_t w)

virtual void	SetMinHeight (UInt_t h)

virtual void	SetMinWidth (UInt_t w)

virtual void	SetSize (const TGDimension &s)

virtual void	SetWidth (UInt_t w)

virtual void	SetX (Int_t x)

virtual void	SetY (Int_t y)

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

void	UnmapWindow () override
	unmap window

Public Member Functions inherited from TGWindow
	TGWindow (const TGWindow p=nullptr, Int_t x=0, Int_t y=0, UInt_t w=0, UInt_t h=0, UInt_t border=0, Int_t depth=0, UInt_t clss=0, void visual=nullptr, SetWindowAttributes_t *attr=nullptr, UInt_t wtype=0)
	Create a new window.

	TGWindow (TGClient c, Window_t id, const TGWindow parent=nullptr)
	Create a copy of a window.

virtual	~TGWindow ()
	Window destructor. Unregisters the window.

virtual void	DestroySubwindows ()
	destroy sub windows

virtual void	DestroyWindow ()
	destroy window

virtual UInt_t	GetEditDisabled () const

virtual const TGWindow *	GetMainFrame () const
	Returns top level main frame.

const char *	GetName () const override
	Return unique name, used in SavePrimitive methods.

const TGWindow *	GetParent () const

virtual Bool_t	HandleExpose (Event_t *event)

virtual Bool_t	HandleIdleEvent (TGIdleHandler *)

Bool_t	HandleTimer (TTimer *) override
	Execute action in response of a timer timing out.

virtual void	IconifyWindow ()
	iconify window

TClass *	IsA () const override

virtual Bool_t	IsMapped ()
	Returns kTRUE if window is mapped on screen, kFALSE otherwise.

virtual void	LowerWindow ()
	lower window

void	Print (Option_t *option="") const override
	Print window id.

virtual void	RaiseWindow ()
	raise window

virtual void	RequestFocus ()
	request focus

virtual void	SetBackgroundPixmap (Pixmap_t pixmap)
	set background pixmap

virtual void	SetName (const char *name)

void	Streamer (TBuffer &) override
	Stream an object of class TObject.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TGObject
	TGObject ()

	TGObject (const TGObject &tgo)

virtual	~TGObject ()
	TGObject destructor.

TGClient *	GetClient () const

Handle_t	GetId () const

ULong_t	Hash () const override
	Return hash value for this object.

Bool_t	IsEqual (const TObject *obj) const override
	Equal comparison (TGObjects are equal if they have the same window identifier).

void	SaveAs (const char filename="", Option_t option="") const override
	Write this TGObject to a file using TImage, if filename's extension signals a valid TImage::EImageFileType, as defined by TImage::GetImageFileTypeFromFilename().

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Public Member Functions inherited from TObject
	TObject ()
	TObject constructor.

	TObject (const TObject &object)
	TObject copy ctor.

virtual	~TObject ()
	TObject destructor.

void	AbstractMethod (const char *method) const
	Use this method to implement an "abstract" method that you don't want to leave purely abstract.

virtual void	AppendPad (Option_t *option="")
	Append graphics object to current pad.

virtual void	Browse (TBrowser *b)
	Browse object. May be overridden for another default action.

ULong_t	CheckedHash ()
	Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object.

virtual const char *	ClassName () const
	Returns name of class to which the object belongs.

virtual void	Clear (Option_t *="")

virtual TObject *	Clone (const char *newname="") const
	Make a clone of an object using the Streamer facility.

virtual Int_t	Compare (const TObject *obj) const
	Compare abstract method.

virtual void	Copy (TObject &object) const
	Copy this to obj.

virtual Int_t	DistancetoPrimitive (Int_t px, Int_t py)
	Computes distance from point (px,py) to the object.

virtual void	Draw (Option_t *option="")
	Default Draw method for all objects.

virtual void	Error (const char method, const char msgfmt,...) const
	Issue error message.

virtual void	Execute (const char method, const char params, Int_t *error=nullptr)
	Execute method on this object with the given parameter string, e.g.

virtual void	Execute (TMethod method, TObjArray params, Int_t *error=nullptr)
	Execute method on this object with parameters stored in the TObjArray.

virtual void	ExecuteEvent (Int_t event, Int_t px, Int_t py)
	Execute action corresponding to an event at (px,py).

virtual void	Fatal (const char method, const char msgfmt,...) const
	Issue fatal error message.

virtual TObject *	FindObject (const char *name) const
	Must be redefined in derived classes.

virtual TObject *	FindObject (const TObject *obj) const
	Must be redefined in derived classes.

virtual char *	GetObjectInfo (Int_t px, Int_t py) const
	Returns string containing info about the object at position (px,py).

virtual Option_t *	GetOption () const

virtual const char *	GetTitle () const
	Returns title of object.

virtual UInt_t	GetUniqueID () const
	Return the unique object id.

Bool_t	HasInconsistentHash () const
	Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e.

virtual void	Info (const char method, const char msgfmt,...) const
	Issue info message.

virtual Bool_t	InheritsFrom (const char *classname) const
	Returns kTRUE if object inherits from class "classname".

virtual Bool_t	InheritsFrom (const TClass *cl) const
	Returns kTRUE if object inherits from TClass cl.

void	InvertBit (UInt_t f)

Bool_t	IsDestructed () const
	IsDestructed.

virtual Bool_t	IsFolder () const
	Returns kTRUE in case object contains browsable objects (like containers or lists of other objects).

R__ALWAYS_INLINE Bool_t	IsOnHeap () const

virtual Bool_t	IsSortable () const

R__ALWAYS_INLINE Bool_t	IsZombie () const

virtual void	ls (Option_t *option="") const
	The ls function lists the contents of a class on stdout.

void	MayNotUse (const char *method) const
	Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary).

virtual Bool_t	Notify ()
	This method must be overridden to handle object notification.

void	Obsolete (const char method, const char asOfVers, const char *removedFromVers) const
	Use this method to declare a method obsolete.

void	operator delete (void *ptr)
	Operator delete.

void	operator delete[] (void *ptr)
	Operator delete [].

void *	operator new (size_t sz)

void *	operator new (size_t sz, void *vp)

void *	operator new[] (size_t sz)

void *	operator new[] (size_t sz, void *vp)

TObject &	operator= (const TObject &rhs)
	TObject assignment operator.

virtual void	Paint (Option_t *option="")
	This method must be overridden if a class wants to paint itself.

virtual void	Pop ()
	Pop on object drawn in a pad to the top of the display list.

virtual Int_t	Read (const char *name)
	Read contents of object with specified name from the current directory.

void	ResetBit (UInt_t f)

void	SetBit (UInt_t f)

void	SetBit (UInt_t f, Bool_t set)
	Set or unset the user status bits as specified in f.

virtual void	SetUniqueID (UInt_t uid)
	Set the unique object id.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

virtual void	SysError (const char method, const char msgfmt,...) const
	Issue system error message.

R__ALWAYS_INLINE Bool_t	TestBit (UInt_t f) const

Int_t	TestBits (UInt_t f) const

virtual void	UseCurrentStyle ()
	Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked.

virtual void	Warning (const char method, const char msgfmt,...) const
	Issue warning message.

virtual Int_t	Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0)
	Write this object to the current directory.

virtual Int_t	Write (const char *name=nullptr, Int_t option=0, Int_t bufsize=0) const
	Write this object to the current directory.

Public Member Functions inherited from TQObject
	TQObject ()
	TQObject Constructor.

virtual	~TQObject ()
	TQObject Destructor.

Bool_t	AreSignalsBlocked () const

Bool_t	BlockSignals (Bool_t b)

virtual void	ChangedBy (const char *method)

void	CollectClassSignalLists (TList &list, TClass *cls)
	Collect class signal lists from class cls and all its base-classes.

Bool_t	Connect (const char signal, const char receiver_class, void receiver, const char slot)
	Non-static method is used to connect from the signal of this object to the receiver slot.

virtual void	Connected (const char *)

virtual void	Destroyed ()

Bool_t	Disconnect (const char signal=nullptr, void receiver=nullptr, const char *slot=nullptr)
	Disconnects signal of this object from slot of receiver.

virtual void	Disconnected (const char *)

void	Emit (const char *signal)
	Activate signal without args.

template<typename T >
void	Emit (const char *signal, const T &arg)
	Activate signal with single parameter.

template<typename... T>
void	EmitVA (const char *signal_name, Int_t, const T &... params)
	Emit a signal with a varying number of arguments.

TList *	GetListOfClassSignals () const
	Returns pointer to list of signals of this class.

TList *	GetListOfConnections () const

TList *	GetListOfSignals () const

virtual Bool_t	HasConnection (const char *signal_name) const
	Return true if there is any object connected to this signal.

virtual void	HighPriority (const char signal_name, const char slot_name=nullptr)

virtual void	LowPriority (const char signal_name, const char slot_name=nullptr)

virtual void	Message (const char *msg)

virtual Int_t	NumberOfConnections () const
	Return number of connections for this object.

virtual Int_t	NumberOfSignals () const
	Return number of signals for this object.

void	StreamerNVirtual (TBuffer &ClassDef_StreamerNVirtual_b)

Static Public Member Functions
static TFitEditor *	GetInstance (TVirtualPad pad=nullptr, TObject obj=nullptr)
	Static method - opens the fit panel.

Static Public Member Functions inherited from TGMainFrame
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

Static Public Member Functions inherited from TGCompositeFrame
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

Static Public Member Functions inherited from TGFrame
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

static const TGGC &	GetBckgndGC ()
	Get background color graphics context.

static const TGGC &	GetBlackGC ()
	Get black graphics context.

static Pixel_t	GetBlackPixel ()
	Get black pixel value.

static Pixel_t	GetDefaultFrameBackground ()
	Get default frame background.

static Pixel_t	GetDefaultSelectedBackground ()
	Get default selected frame background.

static const TGGC &	GetHilightGC ()
	Get highlight color graphics context.

static const TGGC &	GetShadowGC ()
	Get shadow color graphics context.

static const TGGC &	GetWhiteGC ()
	Get white graphics context.

static Pixel_t	GetWhitePixel ()
	Get white pixel value.

Static Public Member Functions inherited from TGWindow
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

static Int_t	GetCounter ()
	Return global window counter (total number of created windows).

Static Public Member Functions inherited from TGObject
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

Static Public Member Functions inherited from TObject
static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static const char *	DeclFileName ()

static Longptr_t	GetDtorOnly ()
	Return destructor only flag.

static Bool_t	GetObjectStat ()
	Get status of object stat flag.

static void	SetDtorOnly (void *obj)
	Set destructor only flag.

static void	SetObjectStat (Bool_t stat)
	Turn on/off tracking of objects in the TObjectTable.

Static Public Member Functions inherited from TQObject
static Bool_t	AreAllSignalsBlocked ()
	Returns true if all signals are blocked.

static Bool_t	BlockAllSignals (Bool_t b)
	Block or unblock all signals. Returns the previous block status.

static TClass *	Class ()

static const char *	Class_Name ()

static constexpr Version_t	Class_Version ()

static Bool_t	Connect (const char sender_class, const char signal, const char receiver_class, void receiver, const char *slot)
	This method allows to make a connection from any object of the same class to a single slot.

static Bool_t	Connect (TQObject sender, const char signal, const char receiver_class, void receiver, const char *slot)
	Create connection between sender and receiver.

static const char *	DeclFileName ()

static Bool_t	Disconnect (const char class_name, const char signal, void receiver=nullptr, const char slot=nullptr)
	Disconnects "class signal".

static Bool_t	Disconnect (TQObject sender, const char signal=nullptr, void receiver=nullptr, const char slot=nullptr)
	Disconnects signal in object sender from slot_method in object receiver.

Protected Member Functions
TGComboBox *	BuildMethodList (TGFrame *parent, Int_t id)
	Create method list in a combo box.

Int_t	CheckFunctionString (const char *str)
	Check entered function string.

void	CreateFunctionGroup ()
	Creates the Frame that contains oll the information about the function.

void	CreateGeneralTab ()
	Create 'General' tab.

void	CreateMinimizationTab ()
	Create 'Minimization' tab.

void	DrawSelection (bool restore=false)
	Draws the square around the object showing where the limits for fitting are.

void	FillDataSetList ()
	Create a combo box with all the possible objects to be fitted.

TF1 *	FindFunction ()
	This method looks among the functions stored by the fitpanel, the one that is currently selected in the fFuncList.

TF1 *	GetFitFunction ()

TList *	GetFitObjectListOfFunctions ()

void	GetFunctionsFromSystem ()

void	GetRanges (ROOT::Fit::DataRange &)

TF1 *	HasFitFunction ()
	Look in the list of function for TF1.

void	MakeTitle (TGCompositeFrame parent, const char title)
	Create section title in the GUI.

void	ProcessTreeInput (TObject *objSelected, Int_t selected, TString variables, TString cuts)

virtual void	SetCanvas (TCanvas *c)
	Connect to another canvas.

void	SetEditable (Bool_t)

Protected Member Functions inherited from TGMainFrame
TString	GetMWMfuncString () const
	used in SaveSource()

TString	GetMWMinpString () const
	used in SaveSource()

TString	GetMWMvalueString () const
	used in SaveSource()

Protected Member Functions inherited from TGFrame
void	DoRedraw () override
	Redraw the frame.

virtual void	Draw3dRectangle (UInt_t type, Int_t x, Int_t y, UInt_t w, UInt_t h)
	Draw 3D rectangle on the frame border.

TString	GetOptionString () const
	Returns a frame option string - used in SavePrimitive().

const TGResourcePool *	GetResourcePool () const

void *	GetSender () override

virtual void	StartGuiBuilding (Bool_t on=kTRUE)
	Go into GUI building mode.

Protected Member Functions inherited from TGWindow
	TGWindow (const TGWindow &tgw)

	TGWindow (Window_t id)

TGWindow &	operator= (const TGWindow &tgw)

Protected Member Functions inherited from TGObject
TGObject &	operator= (const TGObject &tgo)

Protected Member Functions inherited from TObject
virtual void	DoError (int level, const char location, const char fmt, va_list va) const
	Interface to ErrorHandler (protected).

void	MakeZombie ()

Protected Member Functions inherited from TQObject
virtual const char *	GetSenderClassName () const

Protected Attributes
TGRadioButton *	fAdd
	set addition mode

TGCheckButton *	fAdd2FuncList
	switch on/off option 'add to list'

TGCheckButton *	fAllWeights1
	switch on/off option 'all weights=1'

TGCheckButton *	fBestErrors
	switch on/off option 'improve errors'

Bool_t	fChangedParams

TGTextButton *	fCloseButton
	close the fit panel

TGRadioButton *	fConv
	set convolution mode

TF1Convolution *	fConvFunc
	! TF1Convolution object

TGComboBox *	fDataSet
	contains list of data set to be fitted

Int_t	fDim
	object dimension

TGTextButton *	fDrawAdvanced
	opens a dialog for advanced draw options

TGCheckButton *	fDrawSame
	switch on/off fit function drawing

TGCheckButton *	fEmptyBinsWghts1
	switch on/off option 'include empry bins'

TGCheckButton *	fEnableRobust
	switch on/off robust option

TGTextEntry *	fEnteredFunc
	contains user function file name

TGNumberEntryField *	fErrorScale

TGTextButton *	fFitButton
	performs fitting

TObject *	fFitObject
	selected object to fit

TGComboBox *	fFuncList
	contains function list

std::vector< FuncParamData_t >	fFuncPars

TGCompositeFrame *	fGeneral
	general tab

TGCheckButton *	fImproveResults
	switch on/off option 'improve fit results'

TGCheckButton *	fIntegral
	switch on/off option 'integral'

TGNumberEntryField *	fIterations

TGLayoutHints *	fLayoutAdd
	layout hints of fAdd radio button

TGLayoutHints *	fLayoutConv
	layout hints of fConv radio button

TGLayoutHints *	fLayoutNone
	layout hints of fNone radio button

TGLayoutHints *	fLayoutNormAdd
	layout hints of fNOrmAdd radio button

TGRadioButton *	fLibFumili

TGRadioButton *	fLibGenetics

TGRadioButton *	fLibGSL

TGRadioButton *	fLibMinuit

TGRadioButton *	fLibMinuit2

TGCheckButton *	fLinearFit
	switch on/off linear fit option

TGComboBox *	fMethodList
	contains method list

TGCompositeFrame *	fMinimization
	minimization tab

TGComboBox *	fMinMethodList

TGCheckButton *	fNoChi2
	switch on/off option 'No Chi-square'

TGCheckButton *	fNoDrawing
	switch on/off 'no drawing' option

TGRadioButton *	fNone
	set no operation mode

TGRadioButton *	fNormAdd
	set normalized addition mode

TGCheckButton *	fNoStoreDrawing
	switch on/off 'no store/drwing' option

TGRadioButton *	fOptDefault
	set default printing mode

TGRadioButton *	fOptQuiet
	set printing mode to 'Quiet'

TGRadioButton *	fOptVerbose
	set printing mode to 'Verbose'

TVirtualPad *	fParentPad
	pad containing the object

std::multimap< TObject , TF1 >	fPrevFit

TGTextButton *	fResetButton
	resets fit parameters

TGNumberEntry *	fRobustValue
	contains robust value for linear fit

TGLabel *	fSelLabel
	contains selected fit function

TGTextButton *	fSetParam
	open set parameters dialog

TGDoubleHSlider *	fSliderX
	slider to set fit range along x-axis

TGNumberEntry *	fSliderXMax
	entry to set the maximum in the range

TGNumberEntry *	fSliderXMin
	entry to set the minumum in the range

TGHorizontalFrame *	fSliderXParent
	parent of fSliderX

TGDoubleHSlider *	fSliderY
	slider to set fit range along y-axis

TGNumberEntry *	fSliderYMax
	entry to set the maximum in the range

TGNumberEntry *	fSliderYMin
	entry to set the minumum in the range

TGHorizontalFrame *	fSliderYParent
	parent of fSliderY

TGDoubleHSlider *	fSliderZ
	slider to set fit range along z-axis

TGHorizontalFrame *	fSliderZParent
	parent of fSliderZ

TGStatusBar *	fStatusBar

TF1NormSum *	fSumFunc
	! TF1NormSum object

std::vector< TF1 * >	fSystemFuncs

TGTab *	fTab
	tab widget holding the editor

TGCompositeFrame *	fTabContainer
	main tab container

TGNumberEntryField *	fTolerance

EObjectType	fType
	object type info

TGComboBox *	fTypeFit
	contains the types of functions to be selected

TGTextButton *	fUpdateButton
	updates data from gROOT and gDirectory

TGCheckButton *	fUseGradient
	switch on/off option 'use gradient'

TGCheckButton *	fUseRange
	switch on/off option 'use function range'

TGTextButton *	fUserButton
	opens a dialog for user-defined fit method

TAxis *	fXaxis
	x-axis

TAxis *	fYaxis
	y-axis

TAxis *	fZaxis
	z-axis

Protected Attributes inherited from TGMainFrame
TList *	fBindList
	list with key bindings

TString	fClassName
	WM class name.

Atom_t *	fDNDTypeList
	handles DND types

TString	fIconName
	icon name

TString	fIconPixmap
	icon pixmap name

UInt_t	fMWMFuncs
	MWM functions.

UInt_t	fMWMInput
	MWM input modes.

UInt_t	fMWMValue
	MWM decoration hints.

TString	fResourceName
	WM resource name.

TString	fWindowName
	window name

UInt_t	fWMHeight
	WM height.

UInt_t	fWMHeightInc
	WM height increments.

EInitialState	fWMInitState
	WM initial state.

UInt_t	fWMMaxHeight
	WM max height.

UInt_t	fWMMaxWidth
	WM max width.

UInt_t	fWMMinHeight
	WM min height.

UInt_t	fWMMinWidth
	WM min width.

UInt_t	fWMWidth
	WM width.

UInt_t	fWMWidthInc
	WM width increments.

Int_t	fWMX
	WM x position.

Int_t	fWMY
	WM y position.

Protected Attributes inherited from TGCompositeFrame
Bool_t	fLayoutBroken
	no layout manager is used

TGLayoutManager *	fLayoutManager
	layout manager

TList *	fList
	container of frame elements

Bool_t	fMapSubwindows
	kTRUE - map subwindows

Int_t	fMustCleanup
	cleanup mode (see EFrameCleanup)

Protected Attributes inherited from TGFrame
Pixel_t	fBackground
	frame background color

Int_t	fBorderWidth
	frame border width

Int_t	fDNDState
	EDNDFlags.

UInt_t	fEventMask
	currently active event mask

TGFrameElement *	fFE
	pointer to frame element

UInt_t	fHeight
	frame height

UInt_t	fMaxHeight
	maximal frame height

UInt_t	fMaxWidth
	maximal frame width

UInt_t	fMinHeight
	minimal frame height

UInt_t	fMinWidth
	minimal frame width

UInt_t	fOptions
	frame options

UInt_t	fWidth
	frame width

Int_t	fX
	frame x position

Int_t	fY
	frame y position

Protected Attributes inherited from TGWindow
UInt_t	fEditDisabled
	flags used for "guibuilding"

TString	fName
	name of the window used in SavePrimitive()

Bool_t	fNeedRedraw
	kTRUE if window needs to be redrawn

const TGWindow *	fParent
	Parent window.

Protected Attributes inherited from TGObject
TGClient *	fClient
	Connection to display server.

Handle_t	fId
	X11/Win32 Window identifier.

Protected Attributes inherited from TQObject
TList *	fListOfConnections
	list of signals from this object

TList *	fListOfSignals

Bool_t	fSignalsBlocked
	list of connections to this object

Static Protected Attributes
static TFitEditor *	fgFitDialog = 0

Static Protected Attributes inherited from TGCompositeFrame
static TGLayoutHints *	fgDefaultHints = nullptr

Static Protected Attributes inherited from TGFrame
static const TGGC *	fgBckgndGC = nullptr

static const TGGC *	fgBlackGC = nullptr

static Pixel_t	fgBlackPixel = 0

static Window_t	fgDbw = 0

static Int_t	fgDbx = 0

static Int_t	fgDby = 0

static Pixel_t	fgDefaultFrameBackground = 0

static Pixel_t	fgDefaultSelectedBackground = 0

static const TGGC *	fgHilightGC = nullptr

static Bool_t	fgInit = kFALSE

static UInt_t	fgLastButton = 0

static Time_t	fgLastClick = 0

static const TGGC *	fgShadowGC = nullptr

static UInt_t	fgUserColor = 0

static const TGGC *	fgWhiteGC = nullptr

static Pixel_t	fgWhitePixel = 0

Static Protected Attributes inherited from TGWindow
static Int_t	fgCounter = 0
	counter of created windows in SavePrimitive

Static Protected Attributes inherited from TQObject
static Bool_t	fgAllSignalsBlocked = kFALSE
	flag used for suppression of signals

Private Member Functions
	TFitEditor (const TFitEditor &)

TFitEditor &	operator= (const TFitEditor &)

void	RetrieveOptions (Foption_t &, TString &, ROOT::Math::MinimizerOptions &, Int_t)
	Retrieve the fitting options from all the widgets.

Friends
class	FitEditorUnitTesting

Additional Inherited Members
Protected Types inherited from TGMainFrame
enum	{ kDontCallClose = (1ULL << ( 14 )) }

Protected Types inherited from TGFrame
enum	{ kDeleteWindowCalled = (1ULL << ( 15 )) }

Protected Types inherited from TObject
enum	{ kOnlyPrepStep = (1ULL << ( 3 )) }

Static Protected Member Functions inherited from TGFrame
static Time_t	GetLastClick ()
	Get time of last mouse click.

Static Protected Member Functions inherited from TQObject
static Int_t	CheckConnectArgs (TQObject sender, TClass sender_class, const char signal, TClass receiver_class, const char *slot)
	Checking of consistency of sender/receiver methods/arguments.

static TString	CompressName (const char *method_name)
	Removes "const" words and blanks from full (with prototype) method name and resolve any typedefs in the method signature.

static Bool_t	ConnectToClass (const char sender_class, const char signal, TClass receiver_class, void receiver, const char *slot)
	This method allows to make connection from any object of the same class to the receiver object.

static Bool_t	ConnectToClass (TQObject sender, const char signal, TClass receiver_class, void receiver, const char *slot)
	Create connection between sender and receiver.

#include <TFitEditor.h>

Inheritance diagram for TFitEditor:

[legend]

Member Typedef Documentation

◆ FuncParams_t

typedef std::vector<FuncParamData_t > TFitEditor::FuncParams_t

Definition at line 239 of file TFitEditor.h.

Constructor & Destructor Documentation

◆ TFitEditor() [1/2]

TFitEditor::TFitEditor ( const TFitEditor & )

private

◆ TFitEditor() [2/2]

TFitEditor::TFitEditor	(	TVirtualPad *	pad,
		TObject *	obj
	)

Constructor of fit editor.

'obj' is the object to be fitted and 'pad' where it is drawn.

Definition at line 351 of file TFitEditor.cxx.

◆ ~TFitEditor()

TFitEditor::~TFitEditor ( )

virtual

Fit editor destructor.

Definition at line 501 of file TFitEditor.cxx.

Member Function Documentation

◆ BuildMethodList()

TGComboBox * TFitEditor::BuildMethodList	(	TGFrame *	parent,
		Int_t	id
	)

protected

Create method list in a combo box.

Definition at line 1885 of file TFitEditor.cxx.

◆ CheckFunctionString()

Int_t TFitEditor::CheckFunctionString ( const char * str )

protected

Check entered function string.

Definition at line 2233 of file TFitEditor.cxx.

◆ CloseWindow()

void TFitEditor::CloseWindow ( )

virtual

Close fit panel window.

Reimplemented from TGMainFrame.

Definition at line 1243 of file TFitEditor.cxx.

◆ ConnectSlots()

void TFitEditor::ConnectSlots ( )

virtual

Connect GUI signals to fit panel slots.

Definition at line 1045 of file TFitEditor.cxx.

◆ CreateFunctionGroup()

void TFitEditor::CreateFunctionGroup ( )

protected

Creates the Frame that contains oll the information about the function.

Definition at line 540 of file TFitEditor.cxx.

◆ CreateGeneralTab()

void TFitEditor::CreateGeneralTab ( )

protected

Create 'General' tab.

Definition at line 656 of file TFitEditor.cxx.

◆ CreateMinimizationTab()

void TFitEditor::CreateMinimizationTab ( )

protected

Create 'Minimization' tab.

Definition at line 895 of file TFitEditor.cxx.

◆ DisconnectSlots()

void TFitEditor::DisconnectSlots ( )

virtual

Disconnect GUI signals from fit panel slots.

Definition at line 1120 of file TFitEditor.cxx.

◆ DoAddition()

void TFitEditor::DoAddition ( Bool_t on )

virtual

Slot connected to addition of predefined functions.

It will insert the next selected function with a plus sign so that it doesn't override the current content of the formula.

Definition at line 2258 of file TFitEditor.cxx.

◆ DoAdvancedOptions()

void TFitEditor::DoAdvancedOptions ( )

virtual

Slot connected to advanced option button (opens a dialog).

Definition at line 1899 of file TFitEditor.cxx.

◆ DoAllWeights1()

void TFitEditor::DoAllWeights1 ( )

virtual

Slot connected to 'set all weights to 1' setting.

Definition at line 1953 of file TFitEditor.cxx.

◆ DoClose()

void TFitEditor::DoClose ( )

virtual

Close the fit panel.

Definition at line 1963 of file TFitEditor.cxx.

◆ DoConvolution()

void TFitEditor::DoConvolution ( Bool_t on )

virtual

Slot connected to addition of predefined functions.

It will insert the next selected function with a plus sign so that it doesn't override the current content of the formula.

Definition at line 2303 of file TFitEditor.cxx.

◆ DoDataSet()

void TFitEditor::DoDataSet ( Int_t sel )

virtual

Selects the data set to be fitted.

Definition at line 2325 of file TFitEditor.cxx.

◆ DoEmptyBinsAllWeights1()

void TFitEditor::DoEmptyBinsAllWeights1 ( )

virtual

Slot connected to 'include emtry bins and forse all weights to 1' setting.

Definition at line 1907 of file TFitEditor.cxx.

◆ DoEnteredFunction()

void TFitEditor::DoEnteredFunction ( )

virtual

Slot connected to entered function in text entry.

Definition at line 2550 of file TFitEditor.cxx.

◆ DoFit()

void TFitEditor::DoFit ( )

virtual

Perform a fit with current parameters' settings.

Definition at line 1980 of file TFitEditor.cxx.

◆ DoFunction()

void TFitEditor::DoFunction ( Int_t sel )

virtual

Slot connected to predefined fit function settings.

Definition at line 2415 of file TFitEditor.cxx.

◆ DoLibrary()

void TFitEditor::DoLibrary ( Bool_t on )

virtual

Set selected minimization library in use.

Definition at line 3128 of file TFitEditor.cxx.

◆ DoLinearFit()

void TFitEditor::DoLinearFit ( )

virtual

Slot connected to linear fit settings.

Definition at line 2573 of file TFitEditor.cxx.

◆ DoMaxIterations()

void TFitEditor::DoMaxIterations ( )

virtual

Set the maximum number of iterations.

Definition at line 3253 of file TFitEditor.cxx.

◆ DoMinMethod()

void TFitEditor::DoMinMethod ( Int_t )

virtual

Set selected minimization method in use.

Definition at line 3218 of file TFitEditor.cxx.

◆ DoNoChi2()

void TFitEditor::DoNoChi2 ( )

virtual

Slot connected to 'no chi2' option settings.

Definition at line 2594 of file TFitEditor.cxx.

◆ DoNormAddition()

void TFitEditor::DoNormAddition ( Bool_t on )

virtual

Slot connected to addition of predefined functions.

It will insert the next selected function with a plus sign so that it doesn't override the current content of the formula.

Definition at line 2279 of file TFitEditor.cxx.

◆ DoNoSelection()

void TFitEditor::DoNoSelection ( )

virtual

Slot called when users close a TCanvas or when the user select no object.

Definition at line 1547 of file TFitEditor.cxx.

◆ DoNoStoreDrawing()

void TFitEditor::DoNoStoreDrawing ( )

virtual

Slot connected to 'no storing, no drawing' settings.

Definition at line 2614 of file TFitEditor.cxx.

◆ DoNumericSliderXChanged()

void TFitEditor::DoNumericSliderXChanged ( )

virtual

Sincronize the numeric sliders with the graphical one.

Definition at line 2873 of file TFitEditor.cxx.

◆ DoNumericSliderYChanged()

void TFitEditor::DoNumericSliderYChanged ( )

virtual

syncronize the numeric slider with the graphical one.

Definition at line 2909 of file TFitEditor.cxx.

◆ DoPrintOpt()

void TFitEditor::DoPrintOpt ( Bool_t on )

virtual

Slot connected to print option settings.

Definition at line 2623 of file TFitEditor.cxx.

◆ DoReset()

void TFitEditor::DoReset ( )

virtual

Reset all fit parameters.

Definition at line 2661 of file TFitEditor.cxx.

◆ DoRobustFit()

void TFitEditor::DoRobustFit ( )

virtual

Slot connected to 'robust fitting' option settings.

Definition at line 2603 of file TFitEditor.cxx.

◆ DoSetParameters()

void TFitEditor::DoSetParameters ( )

virtual

Open set parameters dialog.

Definition at line 2724 of file TFitEditor.cxx.

◆ DoSliderXMoved()

void TFitEditor::DoSliderXMoved ( )

virtual

Slot connected to range settings on x-axis.

Definition at line 2788 of file TFitEditor.cxx.

◆ DoSliderYMoved()

void TFitEditor::DoSliderYMoved ( )

virtual

Slot connected to range settings on y-axis.

Definition at line 2894 of file TFitEditor.cxx.

◆ DoSliderZMoved()

void TFitEditor::DoSliderZMoved ( )

virtual

Slot connected to range settings on z-axis.

Definition at line 2930 of file TFitEditor.cxx.

◆ DoUpdate()

void TFitEditor::DoUpdate ( )

virtual

Easy here!

Definition at line 1971 of file TFitEditor.cxx.

◆ DoUseFuncRange()

void TFitEditor::DoUseFuncRange ( )

virtual

Definition at line 1916 of file TFitEditor.cxx.

◆ DoUserDialog()

void TFitEditor::DoUserDialog ( )

virtual

Open a dialog for getting a user defined method.

Definition at line 2937 of file TFitEditor.cxx.

◆ DrawSelection()

void TFitEditor::DrawSelection ( bool restore = false )

protected

Draws the square around the object showing where the limits for fitting are.

Definition at line 2804 of file TFitEditor.cxx.

◆ FillDataSetList()

void TFitEditor::FillDataSetList ( )

protected

Create a combo box with all the possible objects to be fitted.

Definition at line 1824 of file TFitEditor.cxx.

◆ FillFunctionList()

void TFitEditor::FillFunctionList ( Int_t selected = -1 )

Fills the list of functions depending on the type of fit selected.

Definition at line 1611 of file TFitEditor.cxx.

◆ FillMinMethodList()

void TFitEditor::FillMinMethodList ( Int_t selected = -1 )

Fills the list of methods depending on the minimization library selected.

Definition at line 1740 of file TFitEditor.cxx.

◆ FindFunction()

TF1 * TFitEditor::FindFunction ( )

protected

This method looks among the functions stored by the fitpanel, the one that is currently selected in the fFuncList.

Definition at line 179 of file TFitEditor.cxx.

◆ GetDrawOption()

Option_t * TFitEditor::GetDrawOption ( ) const

virtual

Get draw options of the selected object.

Reimplemented from TObject.

Definition at line 3113 of file TFitEditor.cxx.

◆ GetFitFunction()

TF1 * TFitEditor::GetFitFunction ( )

protected

Definition at line 3592 of file TFitEditor.cxx.

◆ GetFitObjectListOfFunctions()

TList * TFitEditor::GetFitObjectListOfFunctions ( )

protected

Definition at line 3496 of file TFitEditor.cxx.

◆ GetFunctionsFromSystem()

void TFitEditor::GetFunctionsFromSystem ( )

protected

Definition at line 3529 of file TFitEditor.cxx.

◆ GetInstance()

TFitEditor * TFitEditor::GetInstance	(	TVirtualPad *	pad = `nullptr`,
		TObject *	obj = `nullptr`
	)

static

Static method - opens the fit panel.

Definition at line 329 of file TFitEditor.cxx.

◆ GetListOfFittingFunctions()

TList * TFitEditor::GetListOfFittingFunctions ( TObject * obj = nullptr )

Definition at line 3570 of file TFitEditor.cxx.

◆ GetRanges()

void TFitEditor::GetRanges ( ROOT::Fit::DataRange & drange )

protected

Definition at line 3463 of file TFitEditor.cxx.

◆ HasFitFunction()

TF1 * TFitEditor::HasFitFunction ( )

protected

Look in the list of function for TF1.

If a TF1 is found in the list of functions, it will be returned

Definition at line 3277 of file TFitEditor.cxx.

◆ Hide()

void TFitEditor::Hide ( )

virtual

Hide the fit panel and set it to non-active state.

Definition at line 1207 of file TFitEditor.cxx.

◆ MakeTitle()

void TFitEditor::MakeTitle	(	TGCompositeFrame *	parent,
		const char *	title
	)

protected

Create section title in the GUI.

Definition at line 3262 of file TFitEditor.cxx.

◆ operator=()

TFitEditor & TFitEditor::operator= ( const TFitEditor & )

private

◆ ProcessTreeInput()

void TFitEditor::ProcessTreeInput	(	TObject *	objSelected,
		Int_t	selected,
		TString	variables,
		TString	cuts
	)

protected

Definition at line 2401 of file TFitEditor.cxx.

◆ RecursiveRemove()

void TFitEditor::RecursiveRemove ( TObject * obj )

virtual

When obj is deleted, clear fFitObject if fFitObject = obj.

Reimplemented from TObject.

Definition at line 1571 of file TFitEditor.cxx.

◆ RetrieveOptions()

void TFitEditor::RetrieveOptions	(	Foption_t &	fitOpts,
		TString &	drawOpts,
		ROOT::Math::MinimizerOptions &	minOpts,
		Int_t
	)

private

Retrieve the fitting options from all the widgets.

Definition at line 3340 of file TFitEditor.cxx.

◆ SetCanvas()

void TFitEditor::SetCanvas ( TCanvas * c )

protectedvirtual

Connect to another canvas.

Definition at line 1185 of file TFitEditor.cxx.

◆ SetEditable()

void TFitEditor::SetEditable ( Bool_t state )

protectedvirtual

Reimplemented from TGWindow.

Definition at line 3441 of file TFitEditor.cxx.

◆ SetFitObject()

void TFitEditor::SetFitObject	(	TVirtualPad *	pad,
		TObject *	obj,
		Int_t	event
	)

virtual

Slot called when the user clicks on an object inside a canvas.

Updates pointers to the parent pad and the selected object for fitting (if suitable).

Definition at line 1448 of file TFitEditor.cxx.

◆ SetFunction()

void TFitEditor::SetFunction ( const char * function )

virtual

Set the function to be used in performed fit.

Definition at line 2947 of file TFitEditor.cxx.

◆ SetObjectType()

Bool_t TFitEditor::SetObjectType ( TObject * obj )

Check whether the object suitable for fitting and set its type, dimension and method combo box accordingly.

Definition at line 2956 of file TFitEditor.cxx.

◆ Show()

void TFitEditor::Show	(	TVirtualPad *	pad,
		TObject *	obj
	)

virtual

Show the fit panel (possible only via context menu).

Definition at line 1226 of file TFitEditor.cxx.

◆ ShowObjectName()

void TFitEditor::ShowObjectName ( TObject * obj )

Show object name on the top.

Definition at line 3055 of file TFitEditor.cxx.

◆ Terminate()

void TFitEditor::Terminate ( )

virtual

Called to delete the fit panel.

Definition at line 1258 of file TFitEditor.cxx.

◆ UpdateGUI()

void TFitEditor::UpdateGUI ( )

Set the fit panel GUI according to the selected object.

Definition at line 1268 of file TFitEditor.cxx.

Friends And Related Symbol Documentation

◆ FitEditorUnitTesting

friend class FitEditorUnitTesting

friend

Definition at line 241 of file TFitEditor.h.

Member Data Documentation

◆ fAdd

TGRadioButton* TFitEditor::fAdd

protected

set addition mode

Definition at line 72 of file TFitEditor.h.

◆ fAdd2FuncList

TGCheckButton* TFitEditor::fAdd2FuncList

protected

switch on/off option 'add to list'

Definition at line 83 of file TFitEditor.h.

◆ fAllWeights1

TGCheckButton* TFitEditor::fAllWeights1

protected

switch on/off option 'all weights=1'

Definition at line 85 of file TFitEditor.h.

◆ fBestErrors

TGCheckButton* TFitEditor::fBestErrors

protected

switch on/off option 'improve errors'

Definition at line 81 of file TFitEditor.h.

◆ fChangedParams

Bool_t TFitEditor::fChangedParams

protected

Definition at line 145 of file TFitEditor.h.

◆ fCloseButton

TGTextButton* TFitEditor::fCloseButton

protected

close the fit panel

Definition at line 64 of file TFitEditor.h.

◆ fConv

TGRadioButton* TFitEditor::fConv

protected

set convolution mode

Definition at line 74 of file TFitEditor.h.

◆ fConvFunc

TF1Convolution* TFitEditor::fConvFunc

protected

! TF1Convolution object

Definition at line 118 of file TFitEditor.h.

◆ fDataSet

TGComboBox* TFitEditor::fDataSet

protected

contains list of data set to be fitted

Definition at line 66 of file TFitEditor.h.

◆ fDim

Int_t TFitEditor::fDim

protected

object dimension

Definition at line 113 of file TFitEditor.h.

◆ fDrawAdvanced

TGTextButton* TFitEditor::fDrawAdvanced

protected

opens a dialog for advanced draw options

Definition at line 94 of file TFitEditor.h.

◆ fDrawSame

TGCheckButton* TFitEditor::fDrawSame

protected

switch on/off fit function drawing

Definition at line 93 of file TFitEditor.h.

◆ fEmptyBinsWghts1

TGCheckButton* TFitEditor::fEmptyBinsWghts1

protected

switch on/off option 'include empry bins'

Definition at line 87 of file TFitEditor.h.

◆ fEnableRobust

TGCheckButton* TFitEditor::fEnableRobust

protected

switch on/off robust option

Definition at line 105 of file TFitEditor.h.

◆ fEnteredFunc

TGTextEntry* TFitEditor::fEnteredFunc

protected

contains user function file name

Definition at line 69 of file TFitEditor.h.

◆ fErrorScale

TGNumberEntryField* TFitEditor::fErrorScale

protected

Definition at line 139 of file TFitEditor.h.

◆ fFitButton

TGTextButton* TFitEditor::fFitButton

protected

performs fitting

Definition at line 62 of file TFitEditor.h.

◆ fFitObject

TObject* TFitEditor::fFitObject

protected

selected object to fit

Definition at line 111 of file TFitEditor.h.

◆ fFuncList

TGComboBox* TFitEditor::fFuncList

protected

contains function list

Definition at line 68 of file TFitEditor.h.

◆ fFuncPars

std::vector<FuncParamData_t> TFitEditor::fFuncPars

protected

Definition at line 128 of file TFitEditor.h.

◆ fGeneral

TGCompositeFrame* TFitEditor::fGeneral

protected

general tab

Definition at line 59 of file TFitEditor.h.

◆ fgFitDialog

TFitEditor * TFitEditor::fgFitDialog = 0

staticprotected

Definition at line 147 of file TFitEditor.h.

◆ fImproveResults

TGCheckButton* TFitEditor::fImproveResults

protected

switch on/off option 'improve fit results'

Definition at line 86 of file TFitEditor.h.

◆ fIntegral

TGCheckButton* TFitEditor::fIntegral

protected

switch on/off option 'integral'

Definition at line 80 of file TFitEditor.h.

◆ fIterations

TGNumberEntryField* TFitEditor::fIterations

protected

Definition at line 141 of file TFitEditor.h.

◆ fLayoutAdd

TGLayoutHints* TFitEditor::fLayoutAdd

protected

layout hints of fAdd radio button

Definition at line 76 of file TFitEditor.h.

◆ fLayoutConv

TGLayoutHints* TFitEditor::fLayoutConv

protected

layout hints of fConv radio button

Definition at line 78 of file TFitEditor.h.

◆ fLayoutNone

TGLayoutHints* TFitEditor::fLayoutNone

protected

layout hints of fNone radio button

Definition at line 75 of file TFitEditor.h.

◆ fLayoutNormAdd

TGLayoutHints* TFitEditor::fLayoutNormAdd

protected

layout hints of fNOrmAdd radio button

Definition at line 77 of file TFitEditor.h.

◆ fLibFumili

TGRadioButton* TFitEditor::fLibFumili

protected

Definition at line 135 of file TFitEditor.h.

◆ fLibGenetics

TGRadioButton* TFitEditor::fLibGenetics

protected

Definition at line 137 of file TFitEditor.h.

◆ fLibGSL

TGRadioButton* TFitEditor::fLibGSL

protected

Definition at line 136 of file TFitEditor.h.

◆ fLibMinuit

TGRadioButton* TFitEditor::fLibMinuit

protected

Definition at line 133 of file TFitEditor.h.

◆ fLibMinuit2

TGRadioButton* TFitEditor::fLibMinuit2

protected

Definition at line 134 of file TFitEditor.h.

◆ fLinearFit

TGCheckButton* TFitEditor::fLinearFit

protected

switch on/off linear fit option

Definition at line 89 of file TFitEditor.h.

◆ fMethodList

TGComboBox* TFitEditor::fMethodList

protected

contains method list

Definition at line 88 of file TFitEditor.h.

◆ fMinimization

TGCompositeFrame* TFitEditor::fMinimization

protected

minimization tab

Definition at line 60 of file TFitEditor.h.

◆ fMinMethodList

TGComboBox* TFitEditor::fMinMethodList

protected

Definition at line 138 of file TFitEditor.h.

◆ fNoChi2

TGCheckButton* TFitEditor::fNoChi2

protected

switch on/off option 'No Chi-square'

Definition at line 90 of file TFitEditor.h.

◆ fNoDrawing

TGCheckButton* TFitEditor::fNoDrawing

protected

switch on/off 'no drawing' option

Definition at line 92 of file TFitEditor.h.

◆ fNone

TGRadioButton* TFitEditor::fNone

protected

set no operation mode

Definition at line 71 of file TFitEditor.h.

◆ fNormAdd

TGRadioButton* TFitEditor::fNormAdd

protected

set normalized addition mode

Definition at line 73 of file TFitEditor.h.

◆ fNoStoreDrawing

TGCheckButton* TFitEditor::fNoStoreDrawing

protected

switch on/off 'no store/drwing' option

Definition at line 91 of file TFitEditor.h.

◆ fOptDefault

TGRadioButton* TFitEditor::fOptDefault

protected

set default printing mode

Definition at line 107 of file TFitEditor.h.

◆ fOptQuiet

TGRadioButton* TFitEditor::fOptQuiet

protected

set printing mode to 'Quiet'

Definition at line 109 of file TFitEditor.h.

◆ fOptVerbose

TGRadioButton* TFitEditor::fOptVerbose

protected

set printing mode to 'Verbose'

Definition at line 108 of file TFitEditor.h.

◆ fParentPad

TVirtualPad* TFitEditor::fParentPad

protected

pad containing the object

Definition at line 110 of file TFitEditor.h.

◆ fPrevFit

std::multimap<TObject*, TF1*> TFitEditor::fPrevFit

protected

Definition at line 130 of file TFitEditor.h.

◆ fResetButton

TGTextButton* TFitEditor::fResetButton

protected

resets fit parameters

Definition at line 63 of file TFitEditor.h.

◆ fRobustValue

TGNumberEntry* TFitEditor::fRobustValue

protected

contains robust value for linear fit

Definition at line 106 of file TFitEditor.h.

◆ fSelLabel

TGLabel* TFitEditor::fSelLabel

protected

contains selected fit function

Definition at line 65 of file TFitEditor.h.

◆ fSetParam

TGTextButton* TFitEditor::fSetParam

protected

open set parameters dialog

Definition at line 79 of file TFitEditor.h.

◆ fSliderX

TGDoubleHSlider* TFitEditor::fSliderX

protected

slider to set fit range along x-axis

Definition at line 95 of file TFitEditor.h.

◆ fSliderXMax

TGNumberEntry* TFitEditor::fSliderXMax

protected

entry to set the maximum in the range

Definition at line 96 of file TFitEditor.h.

◆ fSliderXMin

TGNumberEntry* TFitEditor::fSliderXMin

protected

entry to set the minumum in the range

Definition at line 97 of file TFitEditor.h.

◆ fSliderXParent

TGHorizontalFrame* TFitEditor::fSliderXParent

protected

parent of fSliderX

Definition at line 102 of file TFitEditor.h.

◆ fSliderY

TGDoubleHSlider* TFitEditor::fSliderY

protected

slider to set fit range along y-axis

Definition at line 98 of file TFitEditor.h.

◆ fSliderYMax

TGNumberEntry* TFitEditor::fSliderYMax

protected

entry to set the maximum in the range

Definition at line 99 of file TFitEditor.h.

◆ fSliderYMin

TGNumberEntry* TFitEditor::fSliderYMin

protected

entry to set the minumum in the range

Definition at line 100 of file TFitEditor.h.

◆ fSliderYParent

TGHorizontalFrame* TFitEditor::fSliderYParent

protected

parent of fSliderY

Definition at line 103 of file TFitEditor.h.

◆ fSliderZ

TGDoubleHSlider* TFitEditor::fSliderZ

protected

slider to set fit range along z-axis

Definition at line 101 of file TFitEditor.h.

◆ fSliderZParent

TGHorizontalFrame* TFitEditor::fSliderZParent

protected

parent of fSliderZ

Definition at line 104 of file TFitEditor.h.

◆ fStatusBar

TGStatusBar* TFitEditor::fStatusBar

protected

Definition at line 143 of file TFitEditor.h.

◆ fSumFunc

TF1NormSum* TFitEditor::fSumFunc

protected

! TF1NormSum object

Definition at line 117 of file TFitEditor.h.

◆ fSystemFuncs

std::vector<TF1*> TFitEditor::fSystemFuncs

protected

Definition at line 131 of file TFitEditor.h.

◆ fTab

TGTab* TFitEditor::fTab

protected

tab widget holding the editor

Definition at line 57 of file TFitEditor.h.

◆ fTabContainer

TGCompositeFrame* TFitEditor::fTabContainer

protected

main tab container

Definition at line 58 of file TFitEditor.h.

◆ fTolerance

TGNumberEntryField* TFitEditor::fTolerance

protected

Definition at line 140 of file TFitEditor.h.

◆ fType

EObjectType TFitEditor::fType

protected

object type info

Definition at line 112 of file TFitEditor.h.

◆ fTypeFit

TGComboBox* TFitEditor::fTypeFit

protected

contains the types of functions to be selected

Definition at line 67 of file TFitEditor.h.

◆ fUpdateButton

TGTextButton* TFitEditor::fUpdateButton

protected

updates data from gROOT and gDirectory

Definition at line 61 of file TFitEditor.h.

◆ fUseGradient

TGCheckButton* TFitEditor::fUseGradient

protected

switch on/off option 'use gradient'

Definition at line 84 of file TFitEditor.h.

◆ fUseRange

TGCheckButton* TFitEditor::fUseRange

protected

switch on/off option 'use function range'

Definition at line 82 of file TFitEditor.h.

◆ fUserButton

TGTextButton* TFitEditor::fUserButton

protected

opens a dialog for user-defined fit method

Definition at line 70 of file TFitEditor.h.

◆ fXaxis

TAxis* TFitEditor::fXaxis

protected

x-axis

Definition at line 114 of file TFitEditor.h.

◆ fYaxis

TAxis* TFitEditor::fYaxis

protected

y-axis

Definition at line 115 of file TFitEditor.h.

◆ fZaxis

TAxis* TFitEditor::fZaxis

protected

z-axis

Definition at line 116 of file TFitEditor.h.

Libraries for TFitEditor:

[legend]

The documentation for this class was generated from the following files:

gui/fitpanel/inc/TFitEditor.h
gui/fitpanel/src/TFitEditor.cxx

Classes

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Static Protected Attributes

Private Member Functions

Friends

Additional Inherited Members

Member Typedef Documentation

◆ FuncParams_t

Constructor & Destructor Documentation

◆ TFitEditor() [1/2]

◆ TFitEditor() [2/2]

◆ ~TFitEditor()

Member Function Documentation

◆ BuildMethodList()

◆ CheckFunctionString()

◆ CloseWindow()

◆ ConnectSlots()

◆ CreateFunctionGroup()

◆ CreateGeneralTab()

◆ CreateMinimizationTab()

◆ DisconnectSlots()

◆ DoAddition()

◆ DoAdvancedOptions()

◆ DoAllWeights1()

◆ DoClose()

◆ DoConvolution()

◆ DoDataSet()

◆ DoEmptyBinsAllWeights1()

◆ DoEnteredFunction()

◆ DoFit()

◆ DoFunction()

◆ DoLibrary()

◆ DoLinearFit()

◆ DoMaxIterations()

◆ DoMinMethod()

◆ DoNoChi2()

◆ DoNormAddition()

◆ DoNoSelection()

◆ DoNoStoreDrawing()

◆ DoNumericSliderXChanged()

◆ DoNumericSliderYChanged()

◆ DoPrintOpt()

◆ DoReset()

◆ DoRobustFit()

◆ DoSetParameters()

◆ DoSliderXMoved()

◆ DoSliderYMoved()

◆ DoSliderZMoved()

◆ DoUpdate()

◆ DoUseFuncRange()

◆ DoUserDialog()

◆ DrawSelection()

◆ FillDataSetList()

◆ FillFunctionList()

◆ FillMinMethodList()

◆ FindFunction()

◆ GetDrawOption()

◆ GetFitFunction()

◆ GetFitObjectListOfFunctions()

◆ GetFunctionsFromSystem()

◆ GetInstance()

◆ GetListOfFittingFunctions()

◆ GetRanges()

◆ HasFitFunction()

◆ Hide()

◆ MakeTitle()

◆ operator=()

◆ ProcessTreeInput()

◆ RecursiveRemove()

◆ RetrieveOptions()

◆ SetCanvas()

◆ SetEditable()

◆ SetFitObject()

◆ SetFunction()

◆ SetObjectType()

◆ Show()