Public Types | |
enum | EInterest { kRead = 1 , kWrite = 2 } |
enum | EServiceType { kSOCKD , kROOTD , kPROOFD } |
enum | EStatusBits { kIsUnix = BIT(16) , kBrokenConn = BIT(17) } |
Public Types inherited from TObject | |
enum | { kIsOnHeap = 0x01000000 , kNotDeleted = 0x02000000 , kZombie = 0x04000000 , kInconsistent = 0x08000000 , kBitMask = 0x00ffffff } |
enum | { kSingleKey = BIT(0) , kOverwrite = BIT(1) , kWriteDelete = BIT(2) } |
enum | EDeprecatedStatusBits { kObjInCanvas = BIT(3) } |
enum | EStatusBits { kCanDelete = BIT(0) , kMustCleanup = BIT(3) , kIsReferenced = BIT(4) , kHasUUID = BIT(5) , kCannotPick = BIT(6) , kNoContextMenu = BIT(8) , kInvalidObject = BIT(13) } |
Public Member Functions | |
TSocket (const char *host, const char *service, Int_t tcpwindowsize=-1) | |
Create a socket. | |
TSocket (const char *host, Int_t port, Int_t tcpwindowsize=-1) | |
Create a socket; see CreateAuthSocket for the form of url. | |
TSocket (const char *sockpath) | |
Create a socket in the Unix domain on 'sockpath'. | |
TSocket (const TSocket &s) | |
TSocket copy ctor. | |
TSocket (Int_t descriptor) | |
Create a socket. | |
TSocket (Int_t descriptor, const char *sockpath) | |
Create a socket. | |
TSocket (TInetAddress address, const char *service, Int_t tcpwindowsize=-1) | |
Create a socket. | |
TSocket (TInetAddress address, Int_t port, Int_t tcpwindowsize=-1) | |
Create a socket. | |
virtual | ~TSocket () |
virtual void | Close (Option_t *opt="") |
Close the socket. | |
UInt_t | GetBytesRecv () const |
UInt_t | GetBytesSent () const |
Int_t | GetCompressionAlgorithm () const |
Int_t | GetCompressionLevel () const |
Int_t | GetCompressionSettings () const |
virtual Int_t | GetDescriptor () const |
Int_t | GetErrorCode () const |
Returns error code. | |
TInetAddress | GetInetAddress () const |
TTimeStamp | GetLastUsage () |
virtual TInetAddress | GetLocalInetAddress () |
Return internet address of local host to which the socket is bound. | |
virtual Int_t | GetLocalPort () |
Return the local port # to which the socket is bound. | |
virtual Int_t | GetOption (ESockOptions opt, Int_t &val) |
Get socket options. Returns -1 in case of error. | |
Int_t | GetPort () const |
Int_t | GetRemoteProtocol () const |
TSecContext * | GetSecContext () const |
const char * | GetService () const |
Int_t | GetServType () const |
Int_t | GetTcpWindowSize () const |
const char * | GetUrl () const |
virtual Bool_t | IsAuthenticated () const |
virtual Bool_t | IsValid () const |
virtual Int_t | Reconnect () |
virtual Int_t | Recv (char *mess, Int_t max) |
Receive a character string message of maximum max length. | |
virtual Int_t | Recv (char *mess, Int_t max, Int_t &kind) |
Receive a character string message of maximum max length. | |
virtual Int_t | Recv (Int_t &status, Int_t &kind) |
Receives a status and a message type. | |
virtual Int_t | Recv (TMessage *&mess) |
Receive a TMessage object. | |
virtual Int_t | RecvRaw (void *buffer, Int_t length, ESendRecvOptions opt=kDefault) |
Receive a raw buffer of specified length bytes. | |
virtual Int_t | Select (Int_t interest=kRead, Long_t timeout=-1) |
Waits for this socket to change status. | |
virtual Int_t | Send (const char *mess, Int_t kind=kMESS_STRING) |
Send a character string buffer. | |
virtual Int_t | Send (const TMessage &mess) |
Send a TMessage object. | |
virtual Int_t | Send (Int_t kind) |
Send a single message opcode. | |
virtual Int_t | Send (Int_t status, Int_t kind) |
Send a status and a single message opcode. | |
virtual Int_t | SendObject (const TObject *obj, Int_t kind=kMESS_OBJECT) |
Send an object. | |
virtual Int_t | SendRaw (const void *buffer, Int_t length, ESendRecvOptions opt=kDefault) |
Send a raw buffer of specified length. | |
void | SetCompressionAlgorithm (Int_t algorithm=ROOT::RCompressionSetting::EAlgorithm::kUseGlobal) |
See comments for function SetCompressionSettings. | |
void | SetCompressionLevel (Int_t level=ROOT::RCompressionSetting::ELevel::kUseMin) |
See comments for function SetCompressionSettings. | |
void | SetCompressionSettings (Int_t settings=ROOT::RCompressionSetting::EDefaults::kUseCompiledDefault) |
Used to specify the compression level and algorithm: settings = 100 * algorithm + level. | |
virtual Int_t | SetOption (ESockOptions opt, Int_t val) |
Set socket options. | |
void | SetRemoteProtocol (Int_t rproto) |
void | SetSecContext (TSecContext *ctx) |
void | SetService (const char *service) |
void | SetServType (Int_t st) |
void | SetUrl (const char *url) |
void | Touch () |
Public Member Functions inherited from TNamed | |
TNamed () | |
TNamed (const char *name, const char *title) | |
TNamed (const TNamed &named) | |
TNamed copy ctor. | |
TNamed (const TString &name, const TString &title) | |
virtual | ~TNamed () |
TNamed destructor. | |
virtual void | Clear (Option_t *option="") |
Set name and title to empty strings (""). | |
virtual TObject * | Clone (const char *newname="") const |
Make a clone of an object using the Streamer facility. | |
virtual Int_t | Compare (const TObject *obj) const |
Compare two TNamed objects. | |
virtual void | Copy (TObject &named) const |
Copy this to obj. | |
virtual void | FillBuffer (char *&buffer) |
Encode TNamed into output buffer. | |
virtual const char * | GetName () const |
Returns name of object. | |
virtual const char * | GetTitle () const |
Returns title of object. | |
virtual ULong_t | Hash () const |
Return hash value for this object. | |
virtual Bool_t | IsSortable () const |
virtual void | ls (Option_t *option="") const |
List TNamed name and title. | |
TNamed & | operator= (const TNamed &rhs) |
TNamed assignment operator. | |
virtual void | Print (Option_t *option="") const |
Print TNamed name and title. | |
virtual void | SetName (const char *name) |
Set the name of the TNamed. | |
virtual void | SetNameTitle (const char *name, const char *title) |
Set all the TNamed parameters (name and title). | |
virtual void | SetTitle (const char *title="") |
Set the title of the TNamed. | |
virtual Int_t | Sizeof () const |
Return size of the TNamed part of the TObject. | |
Public Member Functions inherited from TObject | |
TObject () | |
TObject constructor. | |
TObject (const TObject &object) | |
TObject copy ctor. | |
virtual | ~TObject () |
TObject destructor. | |
void | AbstractMethod (const char *method) const |
Use this method to implement an "abstract" method that you don't want to leave purely abstract. | |
virtual void | AppendPad (Option_t *option="") |
Append graphics object to current pad. | |
virtual void | Browse (TBrowser *b) |
Browse object. May be overridden for another default action. | |
ULong_t | CheckedHash () |
Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object. | |
virtual const char * | ClassName () const |
Returns name of class to which the object belongs. | |
virtual void | Delete (Option_t *option="") |
Delete this object. | |
virtual Int_t | DistancetoPrimitive (Int_t px, Int_t py) |
Computes distance from point (px,py) to the object. | |
virtual void | Draw (Option_t *option="") |
Default Draw method for all objects. | |
virtual void | DrawClass () const |
Draw class inheritance tree of the class to which this object belongs. | |
virtual TObject * | DrawClone (Option_t *option="") const |
Draw a clone of this object in the current selected pad for instance with: gROOT->SetSelectedPad(gPad) . | |
virtual void | Dump () const |
Dump contents of object on stdout. | |
virtual void | Error (const char *method, const char *msgfmt,...) const |
Issue error message. | |
virtual void | Execute (const char *method, const char *params, Int_t *error=0) |
Execute method on this object with the given parameter string, e.g. | |
virtual void | Execute (TMethod *method, TObjArray *params, Int_t *error=0) |
Execute method on this object with parameters stored in the TObjArray. | |
virtual void | ExecuteEvent (Int_t event, Int_t px, Int_t py) |
Execute action corresponding to an event at (px,py). | |
virtual void | Fatal (const char *method, const char *msgfmt,...) const |
Issue fatal error message. | |
virtual TObject * | FindObject (const char *name) const |
Must be redefined in derived classes. | |
virtual TObject * | FindObject (const TObject *obj) const |
Must be redefined in derived classes. | |
virtual Option_t * | GetDrawOption () const |
Get option used by the graphics system to draw this object. | |
virtual const char * | GetIconName () const |
Returns mime type name of object. | |
virtual char * | GetObjectInfo (Int_t px, Int_t py) const |
Returns string containing info about the object at position (px,py). | |
virtual UInt_t | GetUniqueID () const |
Return the unique object id. | |
virtual Bool_t | HandleTimer (TTimer *timer) |
Execute action in response of a timer timing out. | |
Bool_t | HasInconsistentHash () const |
Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e. | |
virtual void | Info (const char *method, const char *msgfmt,...) const |
Issue info message. | |
virtual Bool_t | InheritsFrom (const char *classname) const |
Returns kTRUE if object inherits from class "classname". | |
virtual Bool_t | InheritsFrom (const TClass *cl) const |
Returns kTRUE if object inherits from TClass cl. | |
virtual void | Inspect () const |
Dump contents of this object in a graphics canvas. | |
void | InvertBit (UInt_t f) |
Bool_t | IsDestructed () const |
IsDestructed. | |
virtual Bool_t | IsEqual (const TObject *obj) const |
Default equal comparison (objects are equal if they have the same address in memory). | |
virtual Bool_t | IsFolder () const |
Returns kTRUE in case object contains browsable objects (like containers or lists of other objects). | |
R__ALWAYS_INLINE Bool_t | IsOnHeap () const |
R__ALWAYS_INLINE Bool_t | IsZombie () const |
void | MayNotUse (const char *method) const |
Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary). | |
virtual Bool_t | Notify () |
This method must be overridden to handle object notification. | |
void | Obsolete (const char *method, const char *asOfVers, const char *removedFromVers) const |
Use this method to declare a method obsolete. | |
void | operator delete (void *ptr) |
Operator delete. | |
void | operator delete[] (void *ptr) |
Operator delete []. | |
void * | operator new (size_t sz) |
void * | operator new (size_t sz, void *vp) |
void * | operator new[] (size_t sz) |
void * | operator new[] (size_t sz, void *vp) |
TObject & | operator= (const TObject &rhs) |
TObject assignment operator. | |
virtual void | Paint (Option_t *option="") |
This method must be overridden if a class wants to paint itself. | |
virtual void | Pop () |
Pop on object drawn in a pad to the top of the display list. | |
virtual Int_t | Read (const char *name) |
Read contents of object with specified name from the current directory. | |
virtual void | RecursiveRemove (TObject *obj) |
Recursively remove this object from a list. | |
void | ResetBit (UInt_t f) |
virtual void | SaveAs (const char *filename="", Option_t *option="") const |
Save this object in the file specified by filename. | |
virtual void | SavePrimitive (std::ostream &out, Option_t *option="") |
Save a primitive as a C++ statement(s) on output stream "out". | |
void | SetBit (UInt_t f) |
void | SetBit (UInt_t f, Bool_t set) |
Set or unset the user status bits as specified in f. | |
virtual void | SetDrawOption (Option_t *option="") |
Set drawing option for object. | |
virtual void | SetUniqueID (UInt_t uid) |
Set the unique object id. | |
virtual void | SysError (const char *method, const char *msgfmt,...) const |
Issue system error message. | |
R__ALWAYS_INLINE Bool_t | TestBit (UInt_t f) const |
Int_t | TestBits (UInt_t f) const |
virtual void | UseCurrentStyle () |
Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked. | |
virtual void | Warning (const char *method, const char *msgfmt,...) const |
Issue warning message. | |
virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) |
Write this object to the current directory. | |
virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) const |
Write this object to the current directory. | |
Static Public Member Functions | |
static TSocket * | CreateAuthSocket (const char *url, Int_t size=0, Int_t tcpwindowsize=-1, TSocket *s=0, Int_t *err=0) |
Creates a socket or a parallel socket and authenticates to the remote server. | |
static TSocket * | CreateAuthSocket (const char *user, const char *host, Int_t port, Int_t size=0, Int_t tcpwindowsize=-1, TSocket *s=0, Int_t *err=0) |
Creates a socket or a parallel socket and authenticates to the remote server specified in 'url' on remote 'port' as 'user'. | |
static Int_t | GetClientProtocol () |
Static method returning supported client protocol. | |
static ULong64_t | GetSocketBytesRecv () |
Get total number of bytes received via all sockets. | |
static ULong64_t | GetSocketBytesSent () |
Get total number of bytes sent via all sockets. | |
static void | NetError (const char *where, Int_t error) |
Print error string depending on error code. | |
Static Public Member Functions inherited from TObject | |
static Longptr_t | GetDtorOnly () |
Return destructor only flag. | |
static Bool_t | GetObjectStat () |
Get status of object stat flag. | |
static void | SetDtorOnly (void *obj) |
Set destructor only flag. | |
static void | SetObjectStat (Bool_t stat) |
Turn on/off tracking of objects in the TObjectTable. | |
Protected Types | |
enum | ESocketErrors { kInvalid = -1 , kInvalidStillInList = -2 } |
Protected Types inherited from TObject | |
enum | { kOnlyPrepStep = BIT(3) } |
Protected Member Functions | |
TSocket () | |
Bool_t | Authenticate (const char *user) |
Authenticated the socket with specified user. | |
void | MarkBrokenConnection () |
Close the socket and mark as due to a broken connection. | |
Bool_t | RecvProcessIDs (TMessage *mess) |
Receive a message containing process ids. | |
Bool_t | RecvStreamerInfos (TMessage *mess) |
Receive a message containing streamer infos. | |
void | SendProcessIDs (const TMessage &mess) |
Check if TProcessIDs must be sent. | |
void | SendStreamerInfos (const TMessage &mess) |
Check if TStreamerInfo must be sent. | |
void | SetDescriptor (Int_t desc) |
Protected Member Functions inherited from TObject | |
virtual void | DoError (int level, const char *location, const char *fmt, va_list va) const |
Interface to ErrorHandler (protected). | |
void | MakeZombie () |
Protected Attributes | |
TInetAddress | fAddress |
TBits | fBitsInfo |
UInt_t | fBytesRecv |
UInt_t | fBytesSent |
Int_t | fCompress |
TTimeStamp | fLastUsage |
TVirtualMutex * | fLastUsageMtx |
TInetAddress | fLocalAddress |
Int_t | fRemoteProtocol |
TSecContext * | fSecContext |
TString | fService |
EServiceType | fServType |
Int_t | fSocket |
Int_t | fTcpWindowSize |
TString | fUrl |
TList * | fUUIDs |
Protected Attributes inherited from TNamed | |
TString | fName |
TString | fTitle |
Static Protected Attributes | |
static ULong64_t | fgBytesRecv = 0 |
static ULong64_t | fgBytesSent = 0 |
static Int_t | fgClientProtocol = 17 |
Private Member Functions | |
Option_t * | GetOption () const |
TSocket & | operator= (const TSocket &) |
Friends | |
class | TProofServ |
class | TServerSocket |
class | TSlave |
#include <TSocket.h>
enum TSocket::EInterest |
|
protected |
enum TSocket::EStatusBits |
TSocket::TSocket | ( | TInetAddress | addr, |
const char * | service, | ||
Int_t | tcpwindowsize = -1 |
||
) |
Create a socket.
Connect to the named service at address addr. Use tcpwindowsize to specify the size of the receive buffer, it has to be specified here to make sure the window scale option is set (for tcpwindowsize > 65KB and for platforms supporting window scaling). Returns when connection has been accepted by remote side. Use IsValid() to check the validity of the socket. Every socket is added to the TROOT sockets list which will make sure that any open sockets are properly closed on program termination.
Definition at line 77 of file TSocket.cxx.
TSocket::TSocket | ( | TInetAddress | addr, |
Int_t | port, | ||
Int_t | tcpwindowsize = -1 |
||
) |
Create a socket.
Connect to the specified port # at address addr. Use tcpwindowsize to specify the size of the receive buffer, it has to be specified here to make sure the window scale option is set (for tcpwindowsize > 65KB and for platforms supporting window scaling). Returns when connection has been accepted by remote side. Use IsValid() to check the validity of the socket. Every socket is added to the TROOT sockets list which will make sure that any open sockets are properly closed on program termination.
Definition at line 122 of file TSocket.cxx.
TSocket::TSocket | ( | const char * | host, |
const char * | service, | ||
Int_t | tcpwindowsize = -1 |
||
) |
Create a socket.
Connect to named service on the remote host. Use tcpwindowsize to specify the size of the receive buffer, it has to be specified here to make sure the window scale option is set (for tcpwindowsize > 65KB and for platforms supporting window scaling). Returns when connection has been accepted by remote side. Use IsValid() to check the validity of the socket. Every socket is added to the TROOT sockets list which will make sure that any open sockets are properly closed on program termination.
Definition at line 165 of file TSocket.cxx.
Create a socket; see CreateAuthSocket for the form of url.
Connect to the specified port # on the remote host. If user is specified in url, try authentication as user. Use tcpwindowsize to specify the size of the receive buffer, it has to be specified here to make sure the window scale option is set (for tcpwindowsize > 65KB and for platforms supporting window scaling). Returns when connection has been accepted by remote side. Use IsValid() to check the validity of the socket. Every socket is added to the TROOT sockets list which will make sure that any open sockets are properly closed on program termination.
Definition at line 210 of file TSocket.cxx.
TSocket::TSocket | ( | const char * | sockpath | ) |
Create a socket in the Unix domain on 'sockpath'.
Returns when connection has been accepted by the server. Use IsValid() to check the validity of the socket. Every socket is added to the TROOT sockets list which will make sure that any open sockets are properly closed on program termination.
Definition at line 253 of file TSocket.cxx.
TSocket::TSocket | ( | Int_t | desc | ) |
Create a socket.
The socket will adopt previously opened TCP socket with descriptor desc.
Definition at line 285 of file TSocket.cxx.
TSocket::TSocket | ( | Int_t | desc, |
const char * | sockpath | ||
) |
Create a socket.
The socket will adopt previously opened Unix socket with descriptor desc. The sockpath arg is for info purposes only. Use this method to adopt e.g. a socket created via socketpair().
Definition at line 314 of file TSocket.cxx.
TSocket::TSocket | ( | const TSocket & | s | ) |
TSocket copy ctor.
Definition at line 347 of file TSocket.cxx.
|
protected |
Authenticated the socket with specified user.
Definition at line 1106 of file TSocket.cxx.
Close the socket.
If option is "force", calls shutdown(id,2) to shut down the connection. This will close the connection also for the parent of this process. Also called via the dtor (without option "force", call explicitly Close("force") if this is desired).
Reimplemented in TPSocket, TXSocket, and TSSLSocket.
Definition at line 389 of file TSocket.cxx.
|
static |
Creates a socket or a parallel socket and authenticates to the remote server.
url: [[proto][p][auth]://][user@]host[:port][/service][?options]
where proto = "sockd", "rootd", "proofd" indicates the type of remote server; if missing "sockd" is assumed ("sockd" indicates any remote server session using TServerSocket) [p] = for parallel sockets (forced internally for rootd; ignored for proofd) [auth] = "up" or "k" to force UsrPwd or Krb5 authentication [port] = is the remote port number [service] = service name used to determine the port (for backward compatibility, specification of port as priority) options = "m" or "s", when proto=proofd indicates whether we are master or slave (used internally by TSlave)
An already opened connection can be used by passing its socket in opensock.
If 'err' is defined, '*err' on return from a failed call contains an error code (see NetErrors.h).
Example:
TSocket::CreateAuthSocket("pk://qwerty@machine.fq.dn:5052",3)
creates an authenticated parallel socket of size 3 to a sockd server running on remote machine machine.fq.dn on port 5052; authentication will attempt protocol Kerberos first.
NB: may hang if the remote server is not of the correct type; at present TSocket has no way to find out the type of the remote server automatically
Returns pointer to an authenticated socket or 0 if creation or authentication is unsuccessful.
Definition at line 1290 of file TSocket.cxx.
|
static |
Creates a socket or a parallel socket and authenticates to the remote server specified in 'url' on remote 'port' as 'user'.
url: [[proto][p][auth]://]host[/?options]
where proto = "sockd", "rootd", "proofd" indicates the type of remote server if missing "sockd" is assumed ("sockd" indicates any remote server session using TServerSocket) [p] = for parallel sockets (forced internally for rootd) [auth] = "up" or "k" to force UsrPwd or Krb5 authentication [options] = "m" or "s", when proto=proofd indicates whether we are master or slave (used internally by TSlave)
An already opened connection can be used by passing its socket in opensock.
If 'err' is defined, '*err' on return from a failed call contains an error code (see NetErrors.h).
Example:
TSocket::CreateAuthSocket("qwerty","pk://machine.fq.dn:5052",3)
creates an authenticated parallel socket of size 3 to a sockd server running on remote machine machine.fq.dn on port 5052; authentication will attempt protocol Kerberos first.
NB: may hang if the remote server is not of the correct type; at present TSocket has no way to find out the type of the remote server automatically
Returns pointer to an authenticated socket or 0 if creation or authentication is unsuccessful.
Definition at line 1432 of file TSocket.cxx.
|
static |
Static method returning supported client protocol.
Definition at line 1469 of file TSocket.cxx.
|
inlinevirtual |
Int_t TSocket::GetErrorCode | ( | ) | const |
Returns error code.
Meaning depends on context where it is called. If no error condition returns 0 else a value < 0. For example see TServerSocket ctor.
Definition at line 1035 of file TSocket.cxx.
|
inline |
|
inline |
|
virtual |
Return internet address of local host to which the socket is bound.
In case of error TInetAddress::IsValid() returns kFALSE.
Reimplemented in TPSocket, and TServerSocket.
Definition at line 409 of file TSocket.cxx.
|
virtual |
Return the local port # to which the socket is bound.
In case of error return -1.
Reimplemented in TServerSocket.
Definition at line 423 of file TSocket.cxx.
|
inlineprivatevirtual |
|
virtual |
Get socket options. Returns -1 in case of error.
Reimplemented in TPSocket.
Definition at line 1023 of file TSocket.cxx.
|
inline |
|
static |
Get total number of bytes received via all sockets.
Definition at line 1497 of file TSocket.cxx.
|
static |
Get total number of bytes sent via all sockets.
Definition at line 1489 of file TSocket.cxx.
|
inlinevirtual |
|
inlinevirtual |
|
protected |
Close the socket and mark as due to a broken connection.
Definition at line 371 of file TSocket.cxx.
Print error string depending on error code.
Definition at line 1477 of file TSocket.cxx.
|
inlinevirtual |
Reimplemented in TXSocket, and TXUnixSocket.
Receive a character string message of maximum max length.
The expected message must be of type kMESS_STRING. Returns length of received string (can be 0 if otherside of connection is closed) or -1 in case of error or -4 in case a non-blocking socket would block (i.e. there is nothing to be read).
Reimplemented in TServerSocket, TPSocket, TSSLSocket, and TXSocket.
Definition at line 728 of file TSocket.cxx.
Receive a character string message of maximum max length.
Returns in kind the message type. Returns length of received string+4 (can be 0 if other side of connection is closed) or -1 in case of error or -4 in case a non-blocking socket would block (i.e. there is nothing to be read).
Reimplemented in TServerSocket, TPSocket, TSSLSocket, and TXSocket.
Definition at line 756 of file TSocket.cxx.
Receives a status and a message type.
Returns length of received integers, 2*sizeof(Int_t) (can be 0 if other side of connection is closed) or -1 in case of error or -4 in case a non-blocking socket would block (i.e. there is nothing to be read).
Reimplemented in TServerSocket, TPSocket, TSSLSocket, and TXSocket.
Definition at line 789 of file TSocket.cxx.
Receive a TMessage object.
The user must delete the TMessage object. Returns length of message in bytes (can be 0 if other side of connection is closed) or -1 in case of error or -4 in case a non-blocking socket would block (i.e. there is nothing to be read) or -5 if pipe broken or reset by peer (EPIPE || ECONNRESET). In those case mess == 0.
Reimplemented in TServerSocket, TPSocket, TSSLSocket, and TXSocket.
Definition at line 818 of file TSocket.cxx.
Receive a message containing process ids.
In case the message contains process ids they are imported, the message will be deleted and the method returns kTRUE.
Definition at line 975 of file TSocket.cxx.
|
virtual |
Receive a raw buffer of specified length bytes.
Using option kPeek one can peek at incoming data. Returns number of received bytes. Returns -1 in case of error. In case of opt == kOob: -2 means EWOULDBLOCK and -3 EINVAL. In case of non-blocking mode (kNoBlock) -4 means EWOULDBLOCK. Returns -5 if pipe broken or reset by peer (EPIPE || ECONNRESET).
Reimplemented in TServerSocket, TXSocket, TPSocket, and TSSLSocket.
Definition at line 898 of file TSocket.cxx.
Receive a message containing streamer infos.
In case the message contains streamer infos they are imported, the message will be deleted and the method returns kTRUE.
Definition at line 928 of file TSocket.cxx.
Waits for this socket to change status.
If interest=kRead, the socket will be watched to see if characters become available for reading; if interest=kWrite the socket will be watched to see if a write will not block. The argument 'timeout' specifies a maximum time to wait in millisec. Default no timeout. Returns 1 if a change of status of interest has been detected within timeout; 0 in case of timeout; < 0 if an error occured.
Definition at line 443 of file TSocket.cxx.
|
virtual |
Send a character string buffer.
Use kind to set the TMessage "what" field. Returns the number of bytes in the string str that were sent and -1 in case of error. In case the kind has been or'ed with kMESS_ACK, the call will only return after having received an acknowledgement, making the sending process synchronous.
Reimplemented in TServerSocket, TPSocket, TSSLSocket, and TXSocket.
Definition at line 500 of file TSocket.cxx.
Send a TMessage object.
Returns the number of bytes in the TMessage that were sent and -1 in case of error. In case the TMessage::What has been or'ed with kMESS_ACK, the call will only return after having received an acknowledgement, making the sending process synchronous. Returns -4 in case of kNoBlock and errno == EWOULDBLOCK. Returns -5 if pipe broken or reset by peer (EPIPE || ECONNRESET). support for streaming TStreamerInfo added by Rene Brun May 2008 support for streaming TProcessID added by Rene Brun June 2008
Reimplemented in TServerSocket, TPSocket, TSSLSocket, and TXSocket.
Definition at line 522 of file TSocket.cxx.
Send a single message opcode.
Use kind (opcode) to set the TMessage "what" field. Returns the number of bytes that were sent (always sizeof(Int_t)) and -1 in case of error. In case the kind has been or'ed with kMESS_ACK, the call will only return after having received an acknowledgement, making the sending process synchronous.
Reimplemented in TPSocket, TSSLSocket, TXSocket, and TServerSocket.
Definition at line 463 of file TSocket.cxx.
Send a status and a single message opcode.
Use kind (opcode) to set the TMessage "what" field. Returns the number of bytes that were sent (always 2*sizeof(Int_t)) and -1 in case of error. In case the kind has been or'ed with kMESS_ACK, the call will only return after having received an acknowledgement, making the sending process synchronous.
Reimplemented in TPSocket, TSSLSocket, TXSocket, and TServerSocket.
Definition at line 481 of file TSocket.cxx.
|
virtual |
Send an object.
Returns the number of bytes sent and -1 in case of error. In case the "kind" has been or'ed with kMESS_ACK, the call will only return after having received an acknowledgement, making the sending synchronous.
Reimplemented in TServerSocket.
Definition at line 600 of file TSocket.cxx.
Check if TProcessIDs must be sent.
The list of TProcessIDs in the object in the message is found by looking in the TMessage bits. We send only the TProcessIDs not yet send on this socket.
Definition at line 684 of file TSocket.cxx.
|
virtual |
Send a raw buffer of specified length.
Using option kOob one can send OOB data. Returns the number of bytes sent or -1 in case of error. Returns -4 in case of kNoBlock and errno == EWOULDBLOCK. Returns -5 if pipe broken or reset by peer (EPIPE || ECONNRESET).
Reimplemented in TServerSocket, TXSocket, TPSocket, and TSSLSocket.
Definition at line 620 of file TSocket.cxx.
Check if TStreamerInfo must be sent.
The list of TStreamerInfo of classes in the object in the message is in the fInfos list of the message. We send only the TStreamerInfos not yet sent on this socket.
Definition at line 649 of file TSocket.cxx.
void TSocket::SetCompressionAlgorithm | ( | Int_t | algorithm = ROOT::RCompressionSetting::EAlgorithm::kUseGlobal | ) |
See comments for function SetCompressionSettings.
Definition at line 1046 of file TSocket.cxx.
void TSocket::SetCompressionLevel | ( | Int_t | level = ROOT::RCompressionSetting::ELevel::kUseMin | ) |
See comments for function SetCompressionSettings.
Definition at line 1060 of file TSocket.cxx.
void TSocket::SetCompressionSettings | ( | Int_t | settings = ROOT::RCompressionSetting::EDefaults::kUseCompiledDefault | ) |
Used to specify the compression level and algorithm: settings = 100 * algorithm + level.
level = 0, objects written to this file will not be compressed. level = 1, minimal compression level but fast. .... level = 9, maximal compression level but slower and might use more memory. (For the currently supported algorithms, the maximum level is 9) If compress is negative it indicates the compression level is not set yet.
The enumeration ROOT::RCompressionSetting::EAlgorithm associates each algorithm with a number. There is a utility function to help to set the value of the argument. For example, ROOT::CompressionSettings(ROOT::kLZMA, 1) will build an integer which will set the compression to use the LZMA algorithm and compression level 1. These are defined in the header file Compression.h.
Note that the compression settings may be changed at any time. The new compression settings will only apply to branches created or attached after the setting is changed and other objects written after the setting is changed.
Definition at line 1098 of file TSocket.cxx.
|
virtual |
Set socket options.
Reimplemented in TPSocket, and TXSocket.
Definition at line 1013 of file TSocket.cxx.
|
inline |
|
friend |
|
friend |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |