TGraphDelaunay.cxx

Go to the documentation of this file.

// @(#)root/hist:$Id: TGraphDelaunay.cxx,v 1.00
// Author: Olivier Couet, Luke Jones (Royal Holloway, University of London)
 
/*************************************************************************
 * Copyright (C) 1995-2000, Rene Brun and Fons Rademakers.               *
 * All rights reserved.                                                  *
 *                                                                       *
 * For the licensing terms see $ROOTSYS/LICENSE.                         *
 * For the list of contributors see $ROOTSYS/README/CREDITS.             *
 *************************************************************************/
 
#include "TMath.h"
#include "TGraph2D.h"
#include "TGraphDelaunay.h"
 
ClassImp(TGraphDelaunay);
 
 
/** \class TGraphDelaunay
    \ingroup Hist
TGraphDelaunay generates a Delaunay triangulation of a TGraph2D. This
triangulation code derives from an implementation done by Luke Jones
(Royal Holloway, University of London) in April 2002 in the PAW context.
 
This software cannot be guaranteed to work under all circumstances. They
were originally written to work with a few hundred points in an XY space
with similar X and Y ranges.
 
Definition of Delaunay triangulation (After B. Delaunay):
For a set S of points in the Euclidean plane, the unique triangulation DT(S)
of S such that no point in S is inside the circumcircle of any triangle in
DT(S). DT(S) is the dual of the Voronoi diagram of S. If n is the number of
points in S, the Voronoi diagram of S is the partitioning of the plane
containing S points into n convex polygons such that each polygon contains
exactly one point and every point in a given polygon is closer to its
central point than to any other. A Voronoi diagram is sometimes also known
as a Dirichlet tessellation.
 
\image html tgraph2d_delaunay.png
 
[This applet](http://www.cs.cornell.edu/Info/People/chew/Delaunay.html) gives a nice
practical view of Delaunay triangulation and Voronoi diagram.
*/
 
 
////////////////////////////////////////////////////////////////////////////////
/// TGraphDelaunay default constructor
 
TGraphDelaunay::TGraphDelaunay()
            : TNamed("TGraphDelaunay","TGraphDelaunay")
{
   fGraph2D      = 0;
   fX            = 0;
   fY            = 0;
   fZ            = 0;
   fNpoints      = 0;
   fTriedSize    = 0;
   fZout         = 0.;
   fNdt          = 0;
   fNhull        = 0;
   fHullPoints   = 0;
   fXN           = 0;
   fYN           = 0;
   fOrder        = 0;
   fDist         = 0;
   fPTried       = 0;
   fNTried       = 0;
   fMTried       = 0;
   fInit         = kFALSE;
   fXNmin        = 0.;
   fXNmax        = 0.;
   fYNmin        = 0.;
   fYNmax        = 0.;
   fXoffset      = 0.;
   fYoffset      = 0.;
   fXScaleFactor = 0.;
   fYScaleFactor = 0.;
 
   SetMaxIter();
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// TGraphDelaunay normal constructor
 
TGraphDelaunay::TGraphDelaunay(TGraph2D *g)
            : TNamed("TGraphDelaunay","TGraphDelaunay")
{
   fGraph2D      = g;
   fX            = fGraph2D->GetX();
   fY            = fGraph2D->GetY();
   fZ            = fGraph2D->GetZ();
   fNpoints      = fGraph2D->GetN();
   fTriedSize    = 0;
   fZout         = 0.;
   fNdt          = 0;
   fNhull        = 0;
   fHullPoints   = 0;
   fXN           = 0;
   fYN           = 0;
   fOrder        = 0;
   fDist         = 0;
   fPTried       = 0;
   fNTried       = 0;
   fMTried       = 0;
   fInit         = kFALSE;
   fXNmin        = 0.;
   fXNmax        = 0.;
   fYNmin        = 0.;
   fYNmax        = 0.;
   fXoffset      = 0.;
   fYoffset      = 0.;
   fXScaleFactor = 0.;
   fYScaleFactor = 0.;
 
   SetMaxIter();
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// TGraphDelaunay destructor.
 
TGraphDelaunay::~TGraphDelaunay()
{
   if (fPTried)     delete [] fPTried;
   if (fNTried)     delete [] fNTried;
   if (fMTried)     delete [] fMTried;
   if (fHullPoints) delete [] fHullPoints;
   if (fOrder)      delete [] fOrder;
   if (fDist)       delete [] fDist;
   if (fXN)         delete [] fXN;
   if (fYN)         delete [] fYN;
 
   fPTried     = 0;
   fNTried     = 0;
   fMTried     = 0;
   fHullPoints = 0;
   fOrder      = 0;
   fDist       = 0;
   fXN         = 0;
   fYN         = 0;
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Return the z value corresponding to the (x,y) point in fGraph2D
 
Double_t TGraphDelaunay::ComputeZ(Double_t x, Double_t y)
{
   // Initialise the Delaunay algorithm if needed.
   // CreateTrianglesDataStructure computes fXoffset, fYoffset,
   // fXScaleFactor and fYScaleFactor;
   // needed in this function.
   if (!fInit) {
      CreateTrianglesDataStructure();
      FindHull();
      fInit = kTRUE;
   }
 
   // Find the z value corresponding to the point (x,y).
   Double_t xx, yy;
   xx = (x+fXoffset)*fXScaleFactor;
   yy = (y+fYoffset)*fYScaleFactor;
   Double_t zz = Interpolate(xx, yy);
 
   // Wrong zeros may appear when points sit on a regular grid.
   // The following line try to avoid this problem.
   if (zz==0) zz = Interpolate(xx+0.0001, yy);
 
   return zz;
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Function used internally only. It creates the data structures needed to
/// compute the Delaunay triangles.
 
void TGraphDelaunay::CreateTrianglesDataStructure()
{
   // Offset fX and fY so they average zero, and scale so the average
   // of the X and Y ranges is one. The normalized version of fX and fY used
   // in Interpolate.
   Double_t xmax = fGraph2D->GetXmax();
   Double_t ymax = fGraph2D->GetYmax();
   Double_t xmin = fGraph2D->GetXmin();
   Double_t ymin = fGraph2D->GetYmin();
   fXoffset      = -(xmax+xmin)/2.;
   fYoffset      = -(ymax+ymin)/2.;
   fXScaleFactor  = 1./(xmax-xmin);
   fYScaleFactor  = 1./(ymax-ymin);
   fXNmax        = (xmax+fXoffset)*fXScaleFactor;
   fXNmin        = (xmin+fXoffset)*fXScaleFactor;
   fYNmax        = (ymax+fYoffset)*fYScaleFactor;
   fYNmin        = (ymin+fYoffset)*fYScaleFactor;
   fXN           = new Double_t[fNpoints+1];
   fYN           = new Double_t[fNpoints+1];
   for (Int_t n=0; n<fNpoints; n++) {
      fXN[n+1] = (fX[n]+fXoffset)*fXScaleFactor;
      fYN[n+1] = (fY[n]+fYoffset)*fYScaleFactor;
   }
 
   // If needed, creates the arrays to hold the Delaunay triangles.
   // A maximum number of 2*fNpoints is guessed. If more triangles will be
   // find, FillIt will automatically enlarge these arrays.
   fTriedSize = 2*fNpoints;
   fPTried    = new Int_t[fTriedSize];
   fNTried    = new Int_t[fTriedSize];
   fMTried    = new Int_t[fTriedSize];
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Is point e inside the triangle t1-t2-t3 ?
 
Bool_t TGraphDelaunay::Enclose(Int_t t1, Int_t t2, Int_t t3, Int_t e) const
{
   Double_t x[4],y[4],xp, yp;
   x[0] = fXN[t1];
   x[1] = fXN[t2];
   x[2] = fXN[t3];
   x[3] = x[0];
   y[0] = fYN[t1];
   y[1] = fYN[t2];
   y[2] = fYN[t3];
   y[3] = y[0];
   xp   = fXN[e];
   yp   = fYN[e];
   return TMath::IsInside(xp, yp, 4, x, y);
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Files the triangle defined by the 3 vertices p, n and m into the
/// fxTried arrays. If these arrays are to small they are automatically
/// expanded.
 
void TGraphDelaunay::FileIt(Int_t p, Int_t n, Int_t m)
{
   Bool_t swap;
   Int_t tmp, ps = p, ns = n, ms = m;
 
   // order the vertices before storing them
L1:
   swap = kFALSE;
   if (ns > ps) { tmp = ps; ps = ns; ns = tmp; swap = kTRUE;}
   if (ms > ns) { tmp = ns; ns = ms; ms = tmp; swap = kTRUE;}
   if (swap) goto L1;
 
   // expand the triangles storage if needed
   if (fNdt>=fTriedSize) {
      Int_t newN   = 2*fTriedSize;
      Int_t *savep = new Int_t [newN];
      Int_t *saven = new Int_t [newN];
      Int_t *savem = new Int_t [newN];
      memcpy(savep,fPTried,fTriedSize*sizeof(Int_t));
      memset(&savep[fTriedSize],0,(newN-fTriedSize)*sizeof(Int_t));
      delete [] fPTried;
      memcpy(saven,fNTried,fTriedSize*sizeof(Int_t));
      memset(&saven[fTriedSize],0,(newN-fTriedSize)*sizeof(Int_t));
      delete [] fNTried;
      memcpy(savem,fMTried,fTriedSize*sizeof(Int_t));
      memset(&savem[fTriedSize],0,(newN-fTriedSize)*sizeof(Int_t));
      delete [] fMTried;
      fPTried    = savep;
      fNTried    = saven;
      fMTried    = savem;
      fTriedSize = newN;
   }
 
   // store a new Delaunay triangle
   fNdt++;
   fPTried[fNdt-1] = ps;
   fNTried[fNdt-1] = ns;
   fMTried[fNdt-1] = ms;
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Attempt to find all the Delaunay triangles of the point set. It is not
/// guaranteed that it will fully succeed, and no check is made that it has
/// fully succeeded (such a check would be possible by referencing the points
/// that make up the convex hull). The method is to check if each triangle
/// shares all three of its sides with other triangles. If not, a point is
/// generated just outside the triangle on the side(s) not shared, and a new
/// triangle is found for that point. If this method is not working properly
/// (many triangles are not being found) it's probably because the new points
/// are too far beyond or too close to the non-shared sides. Fiddling with
/// the size of the `alittlebit' parameter may help.
 
void TGraphDelaunay::FindAllTriangles()
{
   if (fAllTri) return; else fAllTri = kTRUE;
 
   Double_t xcntr,ycntr,xm,ym,xx,yy;
   Double_t sx,sy,nx,ny,mx,my,mdotn,nn,a;
   Int_t t1,t2,pa,na,ma,pb,nb,mb,p1=0,p2=0,m,n,p3=0;
   Bool_t s[3];
   Double_t alittlebit = 0.0001;
 
   // start with a point that is guaranteed to be inside the hull (the
   // centre of the hull). The starting point is shifted "a little bit"
   // otherwise, in case of triangles aligned on a regular grid, we may
   // found none of them.
   xcntr = 0;
   ycntr = 0;
   for (n=1; n<=fNhull; n++) {
      xcntr = xcntr+fXN[fHullPoints[n-1]];
      ycntr = ycntr+fYN[fHullPoints[n-1]];
   }
   xcntr = xcntr/fNhull+alittlebit;
   ycntr = ycntr/fNhull+alittlebit;
   // and calculate it's triangle
   Interpolate(xcntr,ycntr);
 
   // loop over all Delaunay triangles (including those constantly being
   // produced within the loop) and check to see if their 3 sides also
   // correspond to the sides of other Delaunay triangles, i.e. that they
   // have all their neighbours.
   t1 = 1;
   while (t1 <= fNdt) {
      // get the three points that make up this triangle
      pa = fPTried[t1-1];
      na = fNTried[t1-1];
      ma = fMTried[t1-1];
 
      // produce three integers which will represent the three sides
      s[0]  = kFALSE;
      s[1]  = kFALSE;
      s[2]  = kFALSE;
      // loop over all other Delaunay triangles
      for (t2=1; t2<=fNdt; t2++) {
         if (t2 != t1) {
            // get the points that make up this triangle
            pb = fPTried[t2-1];
            nb = fNTried[t2-1];
            mb = fMTried[t2-1];
            // do triangles t1 and t2 share a side?
            if ((pa==pb && na==nb) || (pa==pb && na==mb) || (pa==nb && na==mb)) {
               // they share side 1
               s[0] = kTRUE;
            } else if ((pa==pb && ma==nb) || (pa==pb && ma==mb) || (pa==nb && ma==mb)) {
               // they share side 2
               s[1] = kTRUE;
            } else if ((na==pb && ma==nb) || (na==pb && ma==mb) || (na==nb && ma==mb)) {
               // they share side 3
               s[2] = kTRUE;
            }
         }
         // if t1 shares all its sides with other Delaunay triangles then
         // forget about it
         if (s[0] && s[1] && s[2]) continue;
      }
      // Looks like t1 is missing a neighbour on at least one side.
      // For each side, take a point a little bit beyond it and calculate
      // the Delaunay triangle for that point, this should be the triangle
      // which shares the side.
      for (m=1; m<=3; m++) {
         if (!s[m-1]) {
            // get the two points that make up this side
            if (m == 1) {
               p1 = pa;
               p2 = na;
               p3 = ma;
            } else if (m == 2) {
               p1 = pa;
               p2 = ma;
               p3 = na;
            } else if (m == 3) {
               p1 = na;
               p2 = ma;
               p3 = pa;
            }
            // get the coordinates of the centre of this side
            xm = (fXN[p1]+fXN[p2])/2.;
            ym = (fYN[p1]+fYN[p2])/2.;
            // we want to add a little to these coordinates to get a point just
            // outside the triangle; (sx,sy) will be the vector that represents
            // the side
            sx = fXN[p1]-fXN[p2];
            sy = fYN[p1]-fYN[p2];
            // (nx,ny) will be the normal to the side, but don't know if it's
            // pointing in or out yet
            nx    = sy;
            ny    = -sx;
            nn    = TMath::Sqrt(nx*nx+ny*ny);
            nx    = nx/nn;
            ny    = ny/nn;
            mx    = fXN[p3]-xm;
            my    = fYN[p3]-ym;
            mdotn = mx*nx+my*ny;
            if (mdotn > 0) {
               // (nx,ny) is pointing in, we want it pointing out
               nx = -nx;
               ny = -ny;
            }
            // increase/decrease xm and ym a little to produce a point
            // just outside the triangle (ensuring that the amount added will
            // be large enough such that it won't be lost in rounding errors)
            a  = TMath::Abs(TMath::Max(alittlebit*xm,alittlebit*ym));
            xx = xm+nx*a;
            yy = ym+ny*a;
            // try and find a new Delaunay triangle for this point
            Interpolate(xx,yy);
 
            // this side of t1 should now, hopefully, if it's not part of the
            // hull, be shared with a new Delaunay triangle just calculated by Interpolate
         }
      }
      t1++;
   }
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Finds those points which make up the convex hull of the set. If the xy
/// plane were a sheet of wood, and the points were nails hammered into it
/// at the respective coordinates, then if an elastic band were stretched
/// over all the nails it would form the shape of the convex hull. Those
/// nails in contact with it are the points that make up the hull.
 
void TGraphDelaunay::FindHull()
{
   Int_t n,nhull_tmp;
   Bool_t in;
 
   if (!fHullPoints) fHullPoints = new Int_t[fNpoints];
 
   nhull_tmp = 0;
   for(n=1; n<=fNpoints; n++) {
      // if the point is not inside the hull of the set of all points
      // bar it, then it is part of the hull of the set of all points
      // including it
      in = InHull(n,n);
      if (!in) {
         // cannot increment fNhull directly - InHull needs to know that
         // the hull has not yet been completely found
         nhull_tmp++;
         fHullPoints[nhull_tmp-1] = n;
      }
   }
   fNhull = nhull_tmp;
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Is point e inside the hull defined by all points apart from x ?
 
Bool_t TGraphDelaunay::InHull(Int_t e, Int_t x) const
{
   Int_t n1,n2,n,m,ntry;
   Double_t lastdphi,dd1,dd2,dx1,dx2,dx3,dy1,dy2,dy3;
   Double_t u,v,vNv1,vNv2,phi1,phi2,dphi,xx,yy;
 
   Bool_t deTinhull = kFALSE;
 
   xx = fXN[e];
   yy = fYN[e];
 
   if (fNhull > 0) {
      //  The hull has been found - no need to use any points other than
      //  those that make up the hull
      ntry = fNhull;
   } else {
      //  The hull has not yet been found, will have to try every point
      ntry = fNpoints;
   }
 
   //  n1 and n2 will represent the two points most separated by angle
   //  from point e. Initially the angle between them will be <180 degs.
   //  But subsequent points will increase the n1-e-n2 angle. If it
   //  increases above 180 degrees then point e must be surrounded by
   //  points - it is not part of the hull.
   n1 = 1;
   n2 = 2;
   if (n1 == x) {
      n1 = n2;
      n2++;
   } else if (n2 == x) {
      n2++;
   }
 
   //  Get the angle n1-e-n2 and set it to lastdphi
   dx1  = xx-fXN[n1];
   dy1  = yy-fYN[n1];
   dx2  = xx-fXN[n2];
   dy2  = yy-fYN[n2];
   phi1 = TMath::ATan2(dy1,dx1);
   phi2 = TMath::ATan2(dy2,dx2);
   dphi = (phi1-phi2)-((Int_t)((phi1-phi2)/TMath::TwoPi())*TMath::TwoPi());
   if (dphi < 0) dphi = dphi+TMath::TwoPi();
   lastdphi = dphi;
   for (n=1; n<=ntry; n++) {
      if (fNhull > 0) {
         // Try hull point n
         m = fHullPoints[n-1];
      } else {
         m = n;
      }
      if ((m!=n1) && (m!=n2) && (m!=x)) {
         // Can the vector e->m be represented as a sum with positive
         // coefficients of vectors e->n1 and e->n2?
         dx1 = xx-fXN[n1];
         dy1 = yy-fYN[n1];
         dx2 = xx-fXN[n2];
         dy2 = yy-fYN[n2];
         dx3 = xx-fXN[m];
         dy3 = yy-fYN[m];
 
         dd1 = (dx2*dy1-dx1*dy2);
         dd2 = (dx1*dy2-dx2*dy1);
 
         if (dd1*dd2!=0) {
            u = (dx2*dy3-dx3*dy2)/dd1;
            v = (dx1*dy3-dx3*dy1)/dd2;
            if ((u<0) || (v<0)) {
               // No, it cannot - point m does not lie in-between n1 and n2 as
               // viewed from e. Replace either n1 or n2 to increase the
               // n1-e-n2 angle. The one to replace is the one which makes the
               // smallest angle with e->m
               vNv1 = (dx1*dx3+dy1*dy3)/TMath::Sqrt(dx1*dx1+dy1*dy1);
               vNv2 = (dx2*dx3+dy2*dy3)/TMath::Sqrt(dx2*dx2+dy2*dy2);
               if (vNv1 > vNv2) {
                  n1   = m;
                  phi1 = TMath::ATan2(dy3,dx3);
                  phi2 = TMath::ATan2(dy2,dx2);
               } else {
                  n2   = m;
                  phi1 = TMath::ATan2(dy1,dx1);
                  phi2 = TMath::ATan2(dy3,dx3);
               }
               dphi = (phi1-phi2)-((Int_t)((phi1-phi2)/TMath::TwoPi())*TMath::TwoPi());
               if (dphi < 0) dphi = dphi+TMath::TwoPi();
               if (((dphi-TMath::Pi())*(lastdphi-TMath::Pi())) < 0) {
                  // The addition of point m means the angle n1-e-n2 has risen
                  // above 180 degs, the point is in the hull.
                  goto L10;
               }
               lastdphi = dphi;
            }
         }
      }
   }
   // Point e is not surrounded by points - it is not in the hull.
   goto L999;
L10:
   deTinhull = kTRUE;
L999:
   return deTinhull;
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Finds the z-value at point e given that it lies
/// on the plane defined by t1,t2,t3
 
Double_t TGraphDelaunay::InterpolateOnPlane(Int_t TI1, Int_t TI2, Int_t TI3, Int_t e) const
{
   Int_t tmp;
   Bool_t swap;
   Double_t x1,x2,x3,y1,y2,y3,f1,f2,f3,u,v,w;
 
   Int_t t1 = TI1;
   Int_t t2 = TI2;
   Int_t t3 = TI3;
 
   // order the vertices
L1:
   swap = kFALSE;
   if (t2 > t1) { tmp = t1; t1 = t2; t2 = tmp; swap = kTRUE;}
   if (t3 > t2) { tmp = t2; t2 = t3; t3 = tmp; swap = kTRUE;}
   if (swap) goto L1;
 
   x1 = fXN[t1];
   x2 = fXN[t2];
   x3 = fXN[t3];
   y1 = fYN[t1];
   y2 = fYN[t2];
   y3 = fYN[t3];
   f1 = fZ[t1-1];
   f2 = fZ[t2-1];
   f3 = fZ[t3-1];
   u  = (f1*(y2-y3)+f2*(y3-y1)+f3*(y1-y2))/(x1*(y2-y3)+x2*(y3-y1)+x3*(y1-y2));
   v  = (f1*(x2-x3)+f2*(x3-x1)+f3*(x1-x2))/(y1*(x2-x3)+y2*(x3-x1)+y3*(x1-x2));
   w  = f1-u*x1-v*y1;
 
   return u*fXN[e]+v*fYN[e]+w;
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Finds the Delaunay triangle that the point (xi,yi) sits in (if any) and
/// calculate a z-value for it by linearly interpolating the z-values that
/// make up that triangle.
 
Double_t TGraphDelaunay::Interpolate(Double_t xx, Double_t yy)
{
   Double_t thevalue;
 
   Int_t it, ntris_tried, p, n, m;
   Int_t i,j,k,l,z,f,d,o1,o2,a,b,t1,t2,t3;
   Int_t ndegen=0,degen=0,fdegen=0,o1degen=0,o2degen=0;
   Double_t vxN,vyN;
   Double_t d1,d2,d3,c1,c2,dko1,dko2,dfo1;
   Double_t dfo2,sin_sum,cfo1k,co2o1k,co2o1f;
 
   Bool_t shouldbein;
   Double_t dx1,dx2,dx3,dy1,dy2,dy3,u,v,dxz[3],dyz[3];
 
   // initialise the Delaunay algorithm if needed
   if (!fInit) {
      CreateTrianglesDataStructure();
      FindHull();
      fInit = kTRUE;
   }
 
   // create vectors needed for sorting
   if (!fOrder) {
      fOrder = new Int_t[fNpoints];
      fDist  = new Double_t[fNpoints];
   }
 
   // the input point will be point zero.
   fXN[0] = xx;
   fYN[0] = yy;
 
   // set the output value to the default value for now
   thevalue = fZout;
 
   // some counting
   ntris_tried = 0;
 
   // no point in proceeding if xx or yy are silly
   if ((xx>fXNmax) || (xx<fXNmin) || (yy>fYNmax) || (yy<fYNmin)) return thevalue;
 
   // check existing Delaunay triangles for a good one
   for (it=1; it<=fNdt; it++) {
      p = fPTried[it-1];
      n = fNTried[it-1];
      m = fMTried[it-1];
      // p, n and m form a previously found Delaunay triangle, does it
      // enclose the point?
      if (Enclose(p,n,m,0)) {
         // yes, we have the triangle
         thevalue = InterpolateOnPlane(p,n,m,0);
         return thevalue;
      }
   }
 
   // is this point inside the convex hull?
   shouldbein = InHull(0,-1);
   if (!shouldbein) return thevalue;
 
   // it must be in a Delaunay triangle - find it...
 
   // order mass points by distance in mass plane from desired point
   for (it=1; it<=fNpoints; it++) {
      vxN = fXN[it];
      vyN = fYN[it];
      fDist[it-1] = TMath::Sqrt((xx-vxN)*(xx-vxN)+(yy-vyN)*(yy-vyN));
   }
 
   // sort array 'fDist' to find closest points
   TMath::Sort(fNpoints, fDist, fOrder, kFALSE);
   for (it=0; it<fNpoints; it++) fOrder[it]++;
 
   // loop over triplets of close points to try to find a triangle that
   // encloses the point.
   for (k=3; k<=fNpoints; k++) {
      m = fOrder[k-1];
      for (j=2; j<=k-1; j++) {
         n = fOrder[j-1];
         for (i=1; i<=j-1; i++) {
            p = fOrder[i-1];
            if (ntris_tried > fMaxIter) {
               // perhaps this point isn't in the hull after all
///            Warning("Interpolate",
///                    "Abandoning the effort to find a Delaunay triangle (and thus interpolated z-value) for point %g %g"
///                    ,xx,yy);
               return thevalue;
            }
            ntris_tried++;
            // check the points aren't colinear
            d1 = TMath::Sqrt((fXN[p]-fXN[n])*(fXN[p]-fXN[n])+(fYN[p]-fYN[n])*(fYN[p]-fYN[n]));
            d2 = TMath::Sqrt((fXN[p]-fXN[m])*(fXN[p]-fXN[m])+(fYN[p]-fYN[m])*(fYN[p]-fYN[m]));
            d3 = TMath::Sqrt((fXN[n]-fXN[m])*(fXN[n]-fXN[m])+(fYN[n]-fYN[m])*(fYN[n]-fYN[m]));
            if ((d1+d2<=d3) || (d1+d3<=d2) || (d2+d3<=d1)) goto L90;
 
            // does the triangle enclose the point?
            if (!Enclose(p,n,m,0)) goto L90;
 
            // is it a Delaunay triangle? (ie. are there any other points
            // inside the circle that is defined by its vertices?)
 
            // test the triangle for Delaunay'ness
 
            // loop over all other points testing each to see if it's
            // inside the triangle's circle
            ndegen = 0;
            for ( z=1; z<=fNpoints; z++) {
               if ((z==p) || (z==n) || (z==m)) goto L50;
               // An easy first check is to see if point z is inside the triangle
               // (if it's in the triangle it's also in the circle)
 
               // point z cannot be inside the triangle if it's further from (xx,yy)
               // than the furthest pointing making up the triangle - test this
               for (l=1; l<=fNpoints; l++) {
                  if (fOrder[l-1] == z) {
                     if ((l<i) || (l<j) || (l<k)) {
                        // point z is nearer to (xx,yy) than m, n or p - it could be in the
                        // triangle so call enclose to find out
 
                        // if it is inside the triangle this can't be a Delaunay triangle
                        if (Enclose(p,n,m,z)) goto L90;
                     } else {
                        // there's no way it could be in the triangle so there's no point
                        // calling enclose
                        goto L1;
                     }
                  }
               }
               // is point z colinear with any pair of the triangle points?
L1:
               if (((fXN[p]-fXN[z])*(fYN[p]-fYN[n])) == ((fYN[p]-fYN[z])*(fXN[p]-fXN[n]))) {
                  // z is colinear with p and n
                  a = p;
                  b = n;
               } else if (((fXN[p]-fXN[z])*(fYN[p]-fYN[m])) == ((fYN[p]-fYN[z])*(fXN[p]-fXN[m]))) {
                  // z is colinear with p and m
                  a = p;
                  b = m;
               } else if (((fXN[n]-fXN[z])*(fYN[n]-fYN[m])) == ((fYN[n]-fYN[z])*(fXN[n]-fXN[m]))) {
                  // z is colinear with n and m
                  a = n;
                  b = m;
               } else {
                  a = 0;
                  b = 0;
               }
               if (a != 0) {
                  // point z is colinear with 2 of the triangle points, if it lies
                  // between them it's in the circle otherwise it's outside
                  if (fXN[a] != fXN[b]) {
                     if (((fXN[z]-fXN[a])*(fXN[z]-fXN[b])) < 0) {
                        goto L90;
                     } else if (((fXN[z]-fXN[a])*(fXN[z]-fXN[b])) == 0) {
                        // At least two points are sitting on top of each other, we will
                        // treat these as one and not consider this a 'multiple points lying
                        // on a common circle' situation. It is a sign something could be
                        // wrong though, especially if the two coincident points have
                        // different fZ's. If they don't then this is harmless.
                        Warning("Interpolate", "Two of these three points are coincident %d %d %d",a,b,z);
                     }
                  } else {
                     if (((fYN[z]-fYN[a])*(fYN[z]-fYN[b])) < 0) {
                        goto L90;
                     } else if (((fYN[z]-fYN[a])*(fYN[z]-fYN[b])) == 0) {
                        // At least two points are sitting on top of each other - see above.
                        Warning("Interpolate", "Two of these three points are coincident %d %d %d",a,b,z);
                     }
                  }
                  // point is outside the circle, move to next point
                  goto L50;
               }
 
               // if point z were to look at the triangle, which point would it see
               // lying between the other two? (we're going to form a quadrilateral
               // from the points, and then demand certain properties of that
               // quadrilateral)
               dxz[0] = fXN[p]-fXN[z];
               dyz[0] = fYN[p]-fYN[z];
               dxz[1] = fXN[n]-fXN[z];
               dyz[1] = fYN[n]-fYN[z];
               dxz[2] = fXN[m]-fXN[z];
               dyz[2] = fYN[m]-fYN[z];
               for(l=1; l<=3; l++) {
                  dx1 = dxz[l-1];
                  dx2 = dxz[l%3];
                  dx3 = dxz[(l+1)%3];
                  dy1 = dyz[l-1];
                  dy2 = dyz[l%3];
                  dy3 = dyz[(l+1)%3];
 
                  // u et v are used only to know their sign. The previous
                  // code computed them with a division which was long and
                  // might be a division by 0. It is now replaced by a
                  // multiplication.
                  u = (dy3*dx2-dx3*dy2)*(dy1*dx2-dx1*dy2);
                  v = (dy3*dx1-dx3*dy1)*(dy2*dx1-dx2*dy1);
 
                  if ((u>=0) && (v>=0)) {
                     // vector (dx3,dy3) is expressible as a sum of the other two vectors
                     // with positive coefficients -> i.e. it lies between the other two vectors
                     if (l == 1) {
                        f  = m;
                        o1 = p;
                        o2 = n;
                     } else if (l == 2) {
                        f  = p;
                        o1 = n;
                        o2 = m;
                     } else {
                        f  = n;
                        o1 = m;
                        o2 = p;
                     }
                     goto L2;
                  }
               }
///            Error("Interpolate", "Should not get to here");
               // may as well soldier on
               f  = m;
               o1 = p;
               o2 = n;
L2:
               // this is not a valid quadrilateral if the diagonals don't cross,
               // check that points f and z lie on opposite side of the line o1-o2,
               // this is true if the angle f-o1-z is greater than o2-o1-z and o2-o1-f
               cfo1k  = ((fXN[f]-fXN[o1])*(fXN[z]-fXN[o1])+(fYN[f]-fYN[o1])*(fYN[z]-fYN[o1]))/
                        TMath::Sqrt(((fXN[f]-fXN[o1])*(fXN[f]-fXN[o1])+(fYN[f]-fYN[o1])*(fYN[f]-fYN[o1]))*
                        ((fXN[z]-fXN[o1])*(fXN[z]-fXN[o1])+(fYN[z]-fYN[o1])*(fYN[z]-fYN[o1])));
               co2o1k = ((fXN[o2]-fXN[o1])*(fXN[z]-fXN[o1])+(fYN[o2]-fYN[o1])*(fYN[z]-fYN[o1]))/
                        TMath::Sqrt(((fXN[o2]-fXN[o1])*(fXN[o2]-fXN[o1])+(fYN[o2]-fYN[o1])*(fYN[o2]-fYN[o1]))*
                        ((fXN[z]-fXN[o1])*(fXN[z]-fXN[o1])  + (fYN[z]-fYN[o1])*(fYN[z]-fYN[o1])));
               co2o1f = ((fXN[o2]-fXN[o1])*(fXN[f]-fXN[o1])+(fYN[o2]-fYN[o1])*(fYN[f]-fYN[o1]))/
                        TMath::Sqrt(((fXN[o2]-fXN[o1])*(fXN[o2]-fXN[o1])+(fYN[o2]-fYN[o1])*(fYN[o2]-fYN[o1]))*
                        ((fXN[f]-fXN[o1])*(fXN[f]-fXN[o1]) + (fYN[f]-fYN[o1])*(fYN[f]-fYN[o1]) ));
               if ((cfo1k>co2o1k) || (cfo1k>co2o1f)) {
                  // not a valid quadrilateral - point z is definitely outside the circle
                  goto L50;
               }
               // calculate the 2 internal angles of the quadrangle formed by joining
               // points z and f to points o1 and o2, at z and f. If they sum to less
               // than 180 degrees then z lies outside the circle
               dko1    = TMath::Sqrt((fXN[z]-fXN[o1])*(fXN[z]-fXN[o1])+(fYN[z]-fYN[o1])*(fYN[z]-fYN[o1]));
               dko2    = TMath::Sqrt((fXN[z]-fXN[o2])*(fXN[z]-fXN[o2])+(fYN[z]-fYN[o2])*(fYN[z]-fYN[o2]));
               dfo1    = TMath::Sqrt((fXN[f]-fXN[o1])*(fXN[f]-fXN[o1])+(fYN[f]-fYN[o1])*(fYN[f]-fYN[o1]));
               dfo2    = TMath::Sqrt((fXN[f]-fXN[o2])*(fXN[f]-fXN[o2])+(fYN[f]-fYN[o2])*(fYN[f]-fYN[o2]));
               c1      = ((fXN[z]-fXN[o1])*(fXN[z]-fXN[o2])+(fYN[z]-fYN[o1])*(fYN[z]-fYN[o2]))/dko1/dko2;
               c2      = ((fXN[f]-fXN[o1])*(fXN[f]-fXN[o2])+(fYN[f]-fYN[o1])*(fYN[f]-fYN[o2]))/dfo1/dfo2;
               sin_sum = c1*TMath::Sqrt(1-c2*c2)+c2*TMath::Sqrt(1-c1*c1);
 
               // sin_sum doesn't always come out as zero when it should do.
               if (sin_sum < -1.E-6) {
                  // z is inside the circle, this is not a Delaunay triangle
                  goto L90;
               } else if (TMath::Abs(sin_sum) <= 1.E-6) {
                  // point z lies on the circumference of the circle (within rounding errors)
                  // defined by the triangle, so there is potential for degeneracy in the
                  // triangle set (Delaunay triangulation does not give a unique way to split
                  // a polygon whose points lie on a circle into constituent triangles). Make
                  // a note of the additional point number.
                  ndegen++;
                  degen   = z;
                  fdegen  = f;
                  o1degen = o1;
                  o2degen = o2;
               }
L50:
            continue;
            }
            // This is a good triangle
            if (ndegen > 0) {
               // but is degenerate with at least one other,
               // haven't figured out what to do if more than 4 points are involved
///            if (ndegen > 1) {
///               Error("Interpolate",
///                     "More than 4 points lying on a circle. No decision making process formulated for triangulating this region in a non-arbitrary way %d %d %d %d",
///                     p,n,m,degen);
///               return thevalue;
///            }
 
               // we have a quadrilateral which can be split down either diagonal
               // (d<->f or o1<->o2) to form valid Delaunay triangles. Choose diagonal
               // with highest average z-value. Whichever we choose we will have
               // verified two triangles as good and two as bad, only note the good ones
               d  = degen;
               f  = fdegen;
               o1 = o1degen;
               o2 = o2degen;
               if ((fZ[o1-1]+fZ[o2-1]) > (fZ[d-1]+fZ[f-1])) {
                  // best diagonalisation of quadrilateral is current one, we have
                  // the triangle
                  t1 = p;
                  t2 = n;
                  t3 = m;
                  // file the good triangles
                  FileIt(p, n, m);
                  FileIt(d, o1, o2);
               } else {
                  // use other diagonal to split quadrilateral, use triangle formed by
                  // point f, the degnerate point d and whichever of o1 and o2 create
                  // an enclosing triangle
                  t1 = f;
                  t2 = d;
                  if (Enclose(f,d,o1,0)) {
                     t3 = o1;
                  } else {
                     t3 = o2;
                  }
                  // file the good triangles
                  FileIt(f, d, o1);
                  FileIt(f, d, o2);
               }
            } else {
               // this is a Delaunay triangle, file it
               FileIt(p, n, m);
               t1 = p;
               t2 = n;
               t3 = m;
            }
            // do the interpolation
            thevalue = InterpolateOnPlane(t1,t2,t3,0);
            return thevalue;
L90:
            continue;
         }
      }
   }
   if (shouldbein) {
      Error("Interpolate",
            "Point outside hull when expected inside: this point could be dodgy %g %g %d",
             xx, yy, ntris_tried);
   }
   return thevalue;
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Defines the number of triangles tested for a Delaunay triangle
/// (number of iterations) before abandoning the search
 
void TGraphDelaunay::SetMaxIter(Int_t n)
{
   fAllTri  = kFALSE;
   fMaxIter = n;
}
 
 
////////////////////////////////////////////////////////////////////////////////
/// Sets the histogram bin height for points lying outside the convex hull ie:
/// the bins in the margin.
 
void TGraphDelaunay::SetMarginBinsContent(Double_t z)
{
   fZout = z;
}