 |
ROOT 6.16/01 Reference Guide |
| |
ROOT 6.16/01 Reference Guide |
2D Histogram with Polygonal Bins
TH2Poly is a 2D Histogram class (TH2) allowing to define polygonal bins of arbitrary shape.
Each bin in the TH2Poly histogram is a TH2PolyBin object. TH2PolyBin is a very simple class containing the vertices (stored as TGraphs or TMultiGraphs ) and contents of the polygonal bin as well as several related functions.
Essentially, a TH2Poly is a TList of TH2PolyBin objects with methods to manipulate them.
Bins are defined using one of the AddBin() methods. The bin definition should be done before filling.
The histogram can be filled with Fill(Double_t x, Double_t y, Double_t w) . w is the weight. If no weight is specified, it is assumed to be 1.
Not all histogram's area need to be binned. Filling an area without bins, will falls into the overflows. Adding a bin is not retroactive; it doesn't affect previous fillings. A Fill() call, that was previously ignored due to the lack of a bin at the specified location, is not reconsidered when that location is binned later.
If there are two overlapping bins, the first one in the list will be incremented by Fill().
The histogram may automatically extends its limits if a bin outside the histogram limits is added. This is done when the default constructor (with no arguments) is used. It generates a histogram with no limits along the X and Y axis. Adding bins to it will extend it up to a proper size.
TH2Poly implements a partitioning algorithm to speed up bins' filling (see the "Partitioning Algorithm" section for details). The partitioning algorithm divides the histogram into regions called cells. The bins that each cell intersects are recorded in an array of TLists. When a coordinate in the histogram is to be filled; the method (quickly) finds which cell the coordinate belongs. It then only loops over the bins intersecting that cell to find the bin the input coordinate corresponds to. The partitioning of the histogram is updated continuously as each bin is added. The default number of cells on each axis is 25. This number could be set to another value in the constructor or adjusted later by calling the ChangePartition(Int_t, Int_t) method. The partitioning algorithm is considerably faster than the brute force algorithm (i.e. checking if each bin contains the input coordinates), especially if the histogram is to be filled many times.
The following very simple macro shows how to build and fill a TH2Poly:
More examples can be found in th2polyBoxes.C, th2polyEurope.C, th2polyHoneycomb.C and th2polyUSA.C.
The partitioning algorithm forms an essential part of the TH2Poly class. It is implemented to speed up the filling of bins.
With the brute force approach, the filling is done in the following way: An iterator loops over all bins in the TH2Poly and invokes the method IsInside() for each of them. This method checks if the input location is in that bin. If the filling coordinate is inside, the bin is filled. Looping over all the bin is very slow.
The alternative is to divide the histogram into virtual rectangular regions called "cells". Each cell stores the pointers of the bins intersecting it. When a coordinate is to be filled, the method finds which cell the coordinate falls into. Since the cells are rectangular, this can be done very quickly. It then only loops over the bins associated with that cell and calls IsInside() only on that bins. This reduces considerably the number of bins on which IsInside() is called and therefore speed up by a huge factor the filling compare to the brute force approach where IsInside() is called for all bins.
The addition of bins to the appropriate cells is done when the bin is added to the histogram. To do this, AddBin() calls the AddBinToPartition() method. This method adds the input bin to the partitioning matrix.
The number of partition cells per axis can be specified in the constructor. If it is not specified, the default value of 25 along each axis will be assigned. This value was chosen because it is small enough to avoid slowing down AddBin(), while being large enough to enhance Fill() by a considerable amount. Regardless of how it is initialized at construction time, it can be changed later with the ChangePartition() method. ChangePartition() deletes the old partition matrix and generates a new one with the specified number of cells on each axis.
The optimum number of partition cells per axis changes with the number of times Fill() will be called. Although partitioning greatly speeds up filling, it also adds a constant time delay into the code. When Fill() is to be called many times, it is more efficient to divide the histogram into a large number cells. However, if the histogram is to be filled only a few times, it is better to divide into a small number of cells.
Public Member Functions | |
| TH2Poly () | |
| Default Constructor. No boundaries specified. More... | |
| TH2Poly (const char *name, const char *title, Double_t xlow, Double_t xup, Double_t ylow, Double_t yup) | |
| Constructor with specified name and boundaries, but no partition cell number. More... | |
| TH2Poly (const char *name, const char *title, Int_t nX, Double_t xlow, Double_t xup, Int_t nY, Double_t ylow, Double_t yup) | |
| Constructor with specified name and boundaries and partition cell number. More... | |
| virtual | ~TH2Poly () |
| Destructor. More... | |
| virtual Bool_t | Add (const TH1 *h1, const TH1 *h2, Double_t c1=1, Double_t c2=1) |
| Replace contents of this histogram by the addition of h1 and h2. More... | |
| virtual Bool_t | Add (const TH1 *h1, Double_t c1) |
| Performs the operation: this = this + c1*h1. More... | |
| virtual Bool_t | Add (TF1 *h1, Double_t c1=1, Option_t *option="") |
| Performs the operation: this = this + c1*f1. More... | |
| Int_t | AddBin (Double_t x1, Double_t y1, Double_t x2, Double_t y2) |
| Add a new bin to the histogram. More... | |
| Int_t | AddBin (Int_t n, const Double_t *x, const Double_t *y) |
| Adds a new bin to the histogram. More... | |
| virtual Int_t | AddBin (TObject *poly) |
| Adds a new bin to the histogram. More... | |
| void | ChangePartition (Int_t n, Int_t m) |
| Changes the number of partition cells in the histogram. More... | |
| void | ClearBinContents () |
| Clears the contents of all bins in the histogram. More... | |
| TObject * | Clone (const char *newname="") const |
| Make a complete copy of the underlying object. More... | |
| virtual TH2PolyBin * | CreateBin (TObject *poly) |
| Create appropriate histogram bin. More... | |
| Int_t | Fill (const char *, const char *, Double_t) |
| Increment cell defined by namex,namey by a weight w. More... | |
| Int_t | Fill (const char *, Double_t, Double_t) |
| Increment cell defined by namex,y by a weight w. More... | |
| virtual Int_t | Fill (const char *name, Double_t w) |
| Increment the bin named "name" by w. More... | |
| virtual Int_t | Fill (Double_t x, Double_t y) |
| Increment the bin containing (x,y) by 1. More... | |
| virtual Int_t | Fill (Double_t x, Double_t y, Double_t w) |
| Increment the bin containing (x,y) by w. More... | |
| Int_t | Fill (Double_t) |
| Invalid Fill method. More... | |
| Int_t | Fill (Double_t, const char *, Double_t) |
| Increment cell defined by x,namey by a weight w. More... | |
| void | FillN (Int_t ntimes, const Double_t *x, const Double_t *y, const Double_t *w, Int_t stride=1) |
| Fills a 2-D histogram with an array of values and weights. More... | |
| void | FillN (Int_t, const Double_t *, const Double_t *, Int_t) |
| Fill this histogram with an array x and weights w. More... | |
| Int_t | FindBin (Double_t x, Double_t y, Double_t z=0) |
| Returns the bin number of the bin at the given coordinate. More... | |
| virtual Double_t | GetBinContent (Int_t bin) const |
| Returns the content of the input bin For the overflow/underflow/sea bins: More... | |
| virtual Double_t | GetBinContent (Int_t, Int_t) const |
| virtual Double_t | GetBinContent (Int_t, Int_t, Int_t) const |
| Bool_t | GetBinContentChanged () const |
| virtual Double_t | GetBinError (Int_t bin) const |
| Returns the value of error associated to bin number bin. More... | |
| virtual Double_t | GetBinError (Int_t, Int_t) const |
| virtual Double_t | GetBinError (Int_t, Int_t, Int_t) const |
| const char * | GetBinName (Int_t bin) const |
| Returns the bin name. More... | |
| TList * | GetBins () |
| const char * | GetBinTitle (Int_t bin) const |
| Returns the bin title. More... | |
| Bool_t | GetFloat () |
| Double_t | GetMaximum () const |
| Returns the maximum value of the histogram. More... | |
| Double_t | GetMaximum (Double_t maxval) const |
| Returns the maximum value of the histogram that is less than maxval. More... | |
| Double_t | GetMinimum () const |
| Returns the minimum value of the histogram. More... | |
| Double_t | GetMinimum (Double_t minval) const |
| Returns the minimum value of the histogram that is greater than minval. More... | |
| Bool_t | GetNewBinAdded () const |
| Int_t | GetNumberOfBins () const |
| virtual void | GetStats (Double_t *stats) const |
| Fill the array stats from the contents of this histogram The array stats must be correctly dimensioned in the calling program. More... | |
| void | Honeycomb (Double_t xstart, Double_t ystart, Double_t a, Int_t k, Int_t s) |
| Bins the histogram using a honeycomb structure. More... | |
| Double_t | Integral (Int_t, Int_t, const Option_t *) const |
| Double_t | Integral (Int_t, Int_t, Int_t, Int_t, const Option_t *) const |
| Double_t | Integral (Int_t, Int_t, Int_t, Int_t, Int_t, Int_t, const Option_t *) const |
| Double_t | Integral (Option_t *option="") const |
| Returns the integral of bin contents. More... | |
| Bool_t | IsInsideBin (Int_t binnr, Double_t x, Double_t y) |
| Return "true" if the point (x,y) is inside the bin of binnr. More... | |
| Long64_t | Merge (TCollection *) |
| Merge TH2Polys Given the special nature of the TH2Poly, the merge is implemented in terms of subsequent TH2Poly::Add calls. More... | |
| virtual void | Reset (Option_t *option) |
| Reset this histogram: contents, errors, etc. More... | |
| void | SavePrimitive (std::ostream &out, Option_t *option="") |
| Save primitive as a C++ statement(s) on output stream out. More... | |
| virtual void | Scale (Double_t c1=1, Option_t *option="") |
| Multiply this histogram by a constant c1. More... | |
| void | SetBinContent (Int_t bin, Double_t content) |
| Sets the contents of the input bin to the input content Negative values between -1 and -9 are for the overflows and the sea. More... | |
| void | SetBinContent (Int_t, Int_t, Double_t) |
| void | SetBinContent (Int_t, Int_t, Int_t, Double_t) |
| void | SetBinContentChanged (Bool_t flag) |
| void | SetFloat (Bool_t flag=true) |
| When set to kTRUE, allows the histogram to expand if a bin outside the limits is added. More... | |
| void | SetNewBinAdded (Bool_t flag) |
 Public Member Functions inherited from TH2 | |
| virtual | ~TH2 () |
| Destructor. More... | |
| virtual Int_t | BufferEmpty (Int_t action=0) |
| Fill histogram with all entries in the buffer. More... | |
| virtual void | Copy (TObject &hnew) const |
| Copy. More... | |
| virtual Int_t | Fill (const char *namex, const char *namey, Double_t w) |
| Increment cell defined by namex,namey by a weight w. More... | |
| virtual Int_t | Fill (const char *namex, Double_t y, Double_t w) |
| Increment cell defined by namex,y by a weight w. More... | |
| virtual Int_t | Fill (Double_t x, const char *namey, Double_t w) |
| Increment cell defined by x,namey by a weight w. More... | |
| virtual Int_t | Fill (Double_t x, Double_t y) |
| Increment cell defined by x,y by 1. More... | |
| virtual Int_t | Fill (Double_t x, Double_t y, Double_t w) |
| Increment cell defined by x,y by a weight w. More... | |
| virtual void | FillN (Int_t ntimes, const Double_t *x, const Double_t *y, const Double_t *w, Int_t stride=1) |
| Fill a 2-D histogram with an array of values and weights. More... | |
| virtual void | FillN (Int_t, const Double_t *, const Double_t *, Int_t) |
| Fill this histogram with an array x and weights w. More... | |
| virtual void | FillRandom (const char *fname, Int_t ntimes=5000) |
| Fill histogram following distribution in function fname. More... | |
| virtual void | FillRandom (TH1 *h, Int_t ntimes=5000) |
| Fill histogram following distribution in histogram h. More... | |
| virtual Int_t | FindFirstBinAbove (Double_t threshold=0, Int_t axis=1) const |
| Find first bin with content > threshold for axis (1=x, 2=y, 3=z) if no bins with content > threshold is found the function returns -1. More... | |
| virtual Int_t | FindLastBinAbove (Double_t threshold=0, Int_t axis=1) const |
| Find last bin with content > threshold for axis (1=x, 2=y, 3=z) if no bins with content > threshold is found the function returns -1. More... | |
| virtual void | FitSlicesX (TF1 *f1=0, Int_t firstybin=0, Int_t lastybin=-1, Int_t cut=0, Option_t *option="QNR", TObjArray *arr=0) |
| Project slices along X in case of a 2-D histogram, then fit each slice with function f1 and make a histogram for each fit parameter Only bins along Y between firstybin and lastybin are considered. More... | |
| virtual void | FitSlicesY (TF1 *f1=0, Int_t firstxbin=0, Int_t lastxbin=-1, Int_t cut=0, Option_t *option="QNR", TObjArray *arr=0) |
| Project slices along Y in case of a 2-D histogram, then fit each slice with function f1 and make a histogram for each fit parameter Only bins along X between firstxbin and lastxbin are considered. More... | |
| virtual Int_t | GetBin (Int_t binx, Int_t biny, Int_t binz=0) const |
| Return Global bin number corresponding to binx,y,z. More... | |
| virtual Double_t | GetBinContent (Int_t bin) const |
| Return content of bin number bin. More... | |
| virtual Double_t | GetBinContent (Int_t binx, Int_t biny) const |
| virtual Double_t | GetBinContent (Int_t binx, Int_t biny, Int_t) const |
| virtual Double_t | GetBinErrorLow (Int_t bin) const |
| Return lower error associated to bin number bin. More... | |
| virtual Double_t | GetBinErrorLow (Int_t binx, Int_t biny) |
| virtual Double_t | GetBinErrorUp (Int_t bin) const |
| Return upper error associated to bin number bin. More... | |
| virtual Double_t | GetBinErrorUp (Int_t binx, Int_t biny) |
| virtual Double_t | GetBinWithContent2 (Double_t c, Int_t &binx, Int_t &biny, Int_t firstxbin=1, Int_t lastxbin=-1, Int_t firstybin=1, Int_t lastybin=-1, Double_t maxdiff=0) const |
| compute first cell (binx,biny) in the range [firstxbin,lastxbin][firstybin,lastybin] for which diff = abs(cell_content-c) <= maxdiff In case several cells in the specified range with diff=0 are found the first cell found is returned in binx,biny. More... | |
| virtual Double_t | GetCorrelationFactor (Int_t axis1=1, Int_t axis2=2) const |
| Return correlation factor between axis1 and axis2. More... | |
| virtual Double_t | GetCovariance (Int_t axis1=1, Int_t axis2=2) const |
| Return covariance between axis1 and axis2. More... | |
| virtual void | GetRandom2 (Double_t &x, Double_t &y) |
| Return 2 random numbers along axis x and y distributed according the cell-contents of a 2-dim histogram return a NaN if the histogram has a bin with negative content. More... | |
| virtual void | GetStats (Double_t *stats) const |
| Fill the array stats from the contents of this histogram The array stats must be correctly dimensioned in the calling program. More... | |
| virtual Double_t | Integral (Int_t binx1, Int_t binx2, Int_t biny1, Int_t biny2, Option_t *option="") const |
| Return integral of bin contents in range [firstxbin,lastxbin],[firstybin,lastybin] for a 2-D histogram By default the integral is computed as the sum of bin contents in the range. More... | |
| virtual Double_t | Integral (Int_t binx1, Int_t binx2, Option_t *option="") const |
| Return integral of bin contents in range [binx1,binx2]. More... | |
| virtual Double_t | Integral (Int_t, Int_t, Int_t, Int_t, Int_t, Int_t, Option_t *="") const |
| virtual Double_t | Integral (Option_t *option="") const |
| Return integral of bin contents. More... | |
| virtual Double_t | Integral (Option_t *option="") const |
| Return integral of bin contents. More... | |
| virtual Double_t | IntegralAndError (Int_t binx1, Int_t binx2, Double_t &err, Option_t *option="") const |
| Return integral of bin contents in range [binx1,binx2] and its error. More... | |
| virtual Double_t | IntegralAndError (Int_t binx1, Int_t binx2, Int_t biny1, Int_t biny2, Double_t &err, Option_t *option="") const |
| Return integral of bin contents in range [firstxbin,lastxbin],[firstybin,lastybin] for a 2-D histogram. More... | |
| virtual Double_t | Interpolate (Double_t x) |
| illegal for a TH2 More... | |
| virtual Double_t | Interpolate (Double_t x, Double_t y) |
| Given a point P(x,y), Interpolate approximates the value via bilinear interpolation based on the four nearest bin centers see Wikipedia, Bilinear Interpolation Andy Mastbaum 10/8/2008 vaguely based on R.Raja 6-Sep-2008. More... | |
| virtual Double_t | Interpolate (Double_t x, Double_t y, Double_t z) |
| illegal for a TH2 More... | |
| virtual Double_t | KolmogorovTest (const TH1 *h2, Option_t *option="") const |
| Statistical test of compatibility in shape between THIS histogram and h2, using Kolmogorov test. More... | |
| TProfile * | ProfileX (const char *name="_pfx", Int_t firstybin=1, Int_t lastybin=-1, Option_t *option="") const |
| Project a 2-D histogram into a profile histogram along X. More... | |
| TProfile * | ProfileY (const char *name="_pfy", Int_t firstxbin=1, Int_t lastxbin=-1, Option_t *option="") const |
| Project a 2-D histogram into a profile histogram along Y. More... | |
| TH1D * | ProjectionX (const char *name="_px", Int_t firstybin=0, Int_t lastybin=-1, Option_t *option="") const |
| Project a 2-D histogram into a 1-D histogram along X. More... | |
| TH1D * | ProjectionY (const char *name="_py", Int_t firstxbin=0, Int_t lastxbin=-1, Option_t *option="") const |
| Project a 2-D histogram into a 1-D histogram along Y. More... | |
| virtual void | PutStats (Double_t *stats) |
| Replace current statistics with the values in array stats. More... | |
| TH1D * | QuantilesX (Double_t prob=0.5, const char *name="_qx") const |
| Compute the X distribution of quantiles in the other variable Y name is the name of the returned histogram prob is the probability content for the quantile (0.5 is the default for the median) An approximate error for the quantile is computed assuming that the distribution in the other variable is normal. More... | |
| TH1D * | QuantilesY (Double_t prob=0.5, const char *name="_qy") const |
| Compute the Y distribution of quantiles in the other variable X name is the name of the returned histogram prob is the probability content for the quantile (0.5 is the default for the median) An approximate error for the quantile is computed assuming that the distribution in the other variable is normal. More... | |
| virtual TH2 * | Rebin (Int_t ngroup=2, const char *newname="", const Double_t *xbins=0) |
| Override TH1::Rebin as TH2::RebinX Rebinning in variable binning as for TH1 is not allowed If a non-null pointer is given an error is flagged see RebinX and Rebin2D. More... | |
| virtual TH2 * | Rebin2D (Int_t nxgroup=2, Int_t nygroup=2, const char *newname="") |
| Rebin this histogram grouping nxgroup/nygroup bins along the xaxis/yaxis together. More... | |
| virtual TH2 * | RebinX (Int_t ngroup=2, const char *newname="") |
| Rebin only the X axis see Rebin2D. More... | |
| virtual TH2 * | RebinY (Int_t ngroup=2, const char *newname="") |
| Rebin only the Y axis see Rebin2D. More... | |
| virtual void | Reset (Option_t *option="") |
| Reset this histogram: contents, errors, etc. More... | |
| virtual void | SetBinContent (Int_t bin, Double_t content) |
| Set bin content. More... | |
| virtual void | SetBinContent (Int_t binx, Int_t biny, Double_t content) |
| virtual void | SetBinContent (Int_t binx, Int_t biny, Int_t, Double_t content) |
| virtual void | SetShowProjectionX (Int_t nbins=1) |
| When the mouse is moved in a pad containing a 2-d view of this histogram a second canvas shows the projection along X corresponding to the mouse position along Y. More... | |
| virtual void | SetShowProjectionY (Int_t nbins=1) |
| When the mouse is moved in a pad containing a 2-d view of this histogram a second canvas shows the projection along Y corresponding to the mouse position along X. More... | |
| virtual TH1 * | ShowBackground (Int_t niter=20, Option_t *option="same") |
| This function calculates the background spectrum in this histogram. More... | |
| virtual Int_t | ShowPeaks (Double_t sigma=2, Option_t *option="", Double_t threshold=0.05) |
| Interface to TSpectrum2::Search the function finds peaks in this histogram where the width is > sigma and the peak maximum greater than threshold*maximum bin content of this. More... | |
| virtual void | Smooth (Int_t ntimes=1, Option_t *option="") |
| Smooth bin contents of this 2-d histogram using kernel algorithms similar to the ones used in the raster graphics community. More... | |
| Public Member Functions inherited from TH1 | |
| virtual | ~TH1 () |
| Histogram default destructor. More... | |
| virtual Bool_t | Add (const TH1 *h, const TH1 *h2, Double_t c1=1, Double_t c2=1) |
| Replace contents of this histogram by the addition of h1 and h2. More... | |
| virtual Bool_t | Add (const TH1 *h1, Double_t c1=1) |
Performs the operation: this = this + c1*h1 If errors are defined (see TH1::Sumw2), errors are also recalculated. More... | |
| virtual Bool_t | Add (TF1 *h1, Double_t c1=1, Option_t *option="") |
Performs the operation: this = this + c1*f1 if errors are defined (see TH1::Sumw2), errors are also recalculated. More... | |
| virtual void | AddBinContent (Int_t bin) |
| Increment bin content by 1. More... | |
| virtual void | AddBinContent (Int_t bin, Double_t w) |
| Increment bin content by a weight w. More... | |
| virtual Double_t | AndersonDarlingTest (const TH1 *h2, Double_t &advalue) const |
| Same function as above but returning also the test statistic value. More... | |
| virtual Double_t | AndersonDarlingTest (const TH1 *h2, Option_t *option="") const |
| Statistical test of compatibility in shape between this histogram and h2, using the Anderson-Darling 2 sample test. More... | |
| virtual void | Browse (TBrowser *b) |
| Browse the Histogram object. More... | |
| virtual Int_t | BufferEmpty (Int_t action=0) |
| Fill histogram with all entries in the buffer. More... | |
| virtual Bool_t | CanExtendAllAxes () const |
| Returns true if all axes are extendable. More... | |
| virtual Double_t | Chi2Test (const TH1 *h2, Option_t *option="UU", Double_t *res=0) const |
| \( \chi^{2} \) test for comparing weighted and unweighted histograms More... | |
| virtual Double_t | Chi2TestX (const TH1 *h2, Double_t &chi2, Int_t &ndf, Int_t &igood, Option_t *option="UU", Double_t *res=0) const |
| The computation routine of the Chisquare test. More... | |
| virtual Double_t | Chisquare (TF1 *f1, Option_t *option="") const |
| Compute and return the chisquare of this histogram with respect to a function The chisquare is computed by weighting each histogram point by the bin error By default the full range of the histogram is used. More... | |
| virtual void | ClearUnderflowAndOverflow () |
| Remove all the content from the underflow and overflow bins, without changing the number of entries After calling this method, every undeflow and overflow bins will have content 0.0 The Sumw2 is also cleared, since there is no more content in the bins. More... | |
| TObject * | Clone (const char *newname=0) const |
| Make a complete copy of the underlying object. More... | |
| virtual Double_t | ComputeIntegral (Bool_t onlyPositive=false) |
| Compute integral (cumulative sum of bins) The result stored in fIntegral is used by the GetRandom functions. More... | |
| virtual void | Copy (TObject &hnew) const |
| Copy this histogram structure to newth1. More... | |
| virtual void | DirectoryAutoAdd (TDirectory *) |
| Perform the automatic addition of the histogram to the given directory. More... | |
| virtual Int_t | DistancetoPrimitive (Int_t px, Int_t py) |
| Compute distance from point px,py to a line. More... | |
| virtual Bool_t | Divide (const TH1 *h1) |
| Divide this histogram by h1. More... | |
| virtual Bool_t | Divide (const TH1 *h1, const TH1 *h2, Double_t c1=1, Double_t c2=1, Option_t *option="") |
| Replace contents of this histogram by the division of h1 by h2. More... | |
| virtual Bool_t | Divide (TF1 *f1, Double_t c1=1) |
Performs the operation: this = this/(c1*f1) if errors are defined (see TH1::Sumw2), errors are also recalculated. More... | |
| virtual void | Draw (Option_t *option="") |
| Draw this histogram with options. More... | |
| virtual TH1 * | DrawCopy (Option_t *option="", const char *name_postfix="_copy") const |
| Copy this histogram and Draw in the current pad. More... | |
| virtual TH1 * | DrawNormalized (Option_t *option="", Double_t norm=1) const |
| Draw a normalized copy of this histogram. More... | |
| virtual void | DrawPanel () |
| Display a panel with all histogram drawing options. More... | |
| virtual void | Eval (TF1 *f1, Option_t *option="") |
| Evaluate function f1 at the center of bins of this histogram. More... | |
| virtual void | ExecuteEvent (Int_t event, Int_t px, Int_t py) |
| Execute action corresponding to one event. More... | |
| virtual void | ExtendAxis (Double_t x, TAxis *axis) |
| Histogram is resized along axis such that x is in the axis range. More... | |
| virtual TH1 * | FFT (TH1 *h_output, Option_t *option) |
| This function allows to do discrete Fourier transforms of TH1 and TH2. More... | |
| virtual Int_t | Fill (const char *name, Double_t w) |
| Increment bin with namex with a weight w. More... | |
| virtual Int_t | Fill (Double_t x) |
| Increment bin with abscissa X by 1. More... | |
| virtual Int_t | Fill (Double_t x, Double_t w) |
| Increment bin with abscissa X with a weight w. More... | |
| virtual void | FillN (Int_t ntimes, const Double_t *x, const Double_t *w, Int_t stride=1) |
| Fill this histogram with an array x and weights w. More... | |
| virtual void | FillN (Int_t, const Double_t *, const Double_t *, const Double_t *, Int_t) |
| virtual void | FillRandom (const char *fname, Int_t ntimes=5000) |
| Fill histogram following distribution in function fname. More... | |
| virtual void | FillRandom (TH1 *h, Int_t ntimes=5000) |
| Fill histogram following distribution in histogram h. More... | |
| virtual Int_t | FindBin (Double_t x, Double_t y=0, Double_t z=0) |
| Return Global bin number corresponding to x,y,z. More... | |
| virtual Int_t | FindFirstBinAbove (Double_t threshold=0, Int_t axis=1) const |
| Find first bin with content > threshold for axis (1=x, 2=y, 3=z) if no bins with content > threshold is found the function returns -1. More... | |
| virtual Int_t | FindFixBin (Double_t x, Double_t y=0, Double_t z=0) const |
| Return Global bin number corresponding to x,y,z. More... | |
| virtual Int_t | FindLastBinAbove (Double_t threshold=0, Int_t axis=1) const |
| Find last bin with content > threshold for axis (1=x, 2=y, 3=z) if no bins with content > threshold is found the function returns -1. More... | |
| virtual TObject * | FindObject (const char *name) const |
| Search object named name in the list of functions. More... | |
| virtual TObject * | FindObject (const TObject *obj) const |
| Search object obj in the list of functions. More... | |
| virtual TFitResultPtr | Fit (const char *formula, Option_t *option="", Option_t *goption="", Double_t xmin=0, Double_t xmax=0) |
| Fit histogram with function fname. More... | |
| virtual TFitResultPtr | Fit (TF1 *f1, Option_t *option="", Option_t *goption="", Double_t xmin=0, Double_t xmax=0) |
| Fit histogram with function f1. More... | |
| virtual void | FitPanel () |
| Display a panel with all histogram fit options. More... | |
| TH1 * | GetAsymmetry (TH1 *h2, Double_t c2=1, Double_t dc2=0) |
| Return an histogram containing the asymmetry of this histogram with h2, where the asymmetry is defined as: More... | |
| virtual Color_t | GetAxisColor (Option_t *axis="X") const |
| Return the number of divisions for "axis". More... | |
| virtual Float_t | GetBarOffset () const |
| virtual Float_t | GetBarWidth () const |
| virtual Int_t | GetBin (Int_t binx, Int_t biny=0, Int_t binz=0) const |
| Return Global bin number corresponding to binx,y,z. More... | |
| virtual Double_t | GetBinCenter (Int_t bin) const |
| Return bin center for 1D histogram. More... | |
| virtual Double_t | GetBinContent (Int_t bin) const |
| Return content of bin number bin. More... | |
| virtual Double_t | GetBinContent (Int_t bin, Int_t) const |
| virtual Double_t | GetBinContent (Int_t bin, Int_t, Int_t) const |
| virtual Double_t | GetBinError (Int_t bin) const |
| Return value of error associated to bin number bin. More... | |
| virtual Double_t | GetBinError (Int_t binx, Int_t biny) const |
| virtual Double_t | GetBinError (Int_t binx, Int_t biny, Int_t binz) const |
| virtual Double_t | GetBinErrorLow (Int_t bin) const |
| Return lower error associated to bin number bin. More... | |
| virtual EBinErrorOpt | GetBinErrorOption () const |
| virtual Double_t | GetBinErrorUp (Int_t bin) const |
| Return upper error associated to bin number bin. More... | |
| virtual Double_t | GetBinLowEdge (Int_t bin) const |
| Return bin lower edge for 1D histogram. More... | |
| virtual Double_t | GetBinWidth (Int_t bin) const |
| Return bin width for 1D histogram. More... | |
| virtual Double_t | GetBinWithContent (Double_t c, Int_t &binx, Int_t firstx=0, Int_t lastx=0, Double_t maxdiff=0) const |
| Compute first binx in the range [firstx,lastx] for which diff = abs(bin_content-c) <= maxdiff. More... | |
| virtual void | GetBinXYZ (Int_t binglobal, Int_t &binx, Int_t &biny, Int_t &binz) const |
| Return binx, biny, binz corresponding to the global bin number globalbin see TH1::GetBin function above. More... | |
| const Double_t * | GetBuffer () const |
| Int_t | GetBufferLength () const |
| Int_t | GetBufferSize () const |
| virtual Double_t | GetCellContent (Int_t binx, Int_t biny) const |
| virtual Double_t | GetCellError (Int_t binx, Int_t biny) const |
| virtual void | GetCenter (Double_t *center) const |
| Fill array with center of bins for 1D histogram Better to use h1.GetXaxis().GetCenter(center) More... | |
| virtual Int_t | GetContour (Double_t *levels=0) |
| Return contour values into array levels if pointer levels is non zero. More... | |
| virtual Double_t | GetContourLevel (Int_t level) const |
| Return value of contour number level. More... | |
| virtual Double_t | GetContourLevelPad (Int_t level) const |
| Return the value of contour number "level" in Pad coordinates. More... | |
| TH1 * | GetCumulative (Bool_t forward=kTRUE, const char *suffix="_cumulative") const |
| Return a pointer to an histogram containing the cumulative The cumulative can be computed both in the forward (default) or backward direction; the name of the new histogram is constructed from the name of this histogram with the suffix suffix appended. More... | |
| virtual Int_t | GetDimension () const |
| TDirectory * | GetDirectory () const |
| virtual Double_t | GetEffectiveEntries () const |
| Number of effective entries of the histogram. More... | |
| virtual Double_t | GetEntries () const |
| Return the current number of entries. More... | |
| virtual TF1 * | GetFunction (const char *name) const |
| Return pointer to function with name. More... | |
| virtual Double_t * | GetIntegral () |
| Return a pointer to the array of bins integral. More... | |
| virtual Double_t | GetKurtosis (Int_t axis=1) const |
| virtual Color_t | GetLabelColor (Option_t *axis="X") const |
| Return the "axis" label color. More... | |
| virtual Style_t | GetLabelFont (Option_t *axis="X") const |
| Return the "axis" label font. More... | |
| virtual Float_t | GetLabelOffset (Option_t *axis="X") const |
| Return the "axis" label offset. More... | |
| virtual Float_t | GetLabelSize (Option_t *axis="X") const |
| Return the "axis" label size. More... | |
| TList * | GetListOfFunctions () const |
| virtual void | GetLowEdge (Double_t *edge) const |
| Fill array with low edge of bins for 1D histogram Better to use h1.GetXaxis().GetLowEdge(edge) More... | |
| virtual Double_t | GetMaximum (Double_t maxval=FLT_MAX) const |
| Return maximum value smaller than maxval of bins in the range, unless the value has been overridden by TH1::SetMaximum, in which case it returns that value. More... | |
| virtual Int_t | GetMaximumBin () const |
| Return location of bin with maximum value in the range. More... | |
| virtual Int_t | GetMaximumBin (Int_t &locmax, Int_t &locmay, Int_t &locmaz) const |
| Return location of bin with maximum value in the range. More... | |
| virtual Double_t | GetMaximumStored () const |
| virtual Double_t | GetMean (Int_t axis=1) const |
| For axis = 1,2 or 3 returns the mean value of the histogram along X,Y or Z axis. More... | |
| virtual Double_t | GetMeanError (Int_t axis=1) const |
| Return standard error of mean of this histogram along the X axis. More... | |
| virtual Double_t | GetMinimum (Double_t minval=-FLT_MAX) const |
| Return minimum value larger than minval of bins in the range, unless the value has been overridden by TH1::SetMinimum, in which case it returns that value. More... | |
| virtual void | GetMinimumAndMaximum (Double_t &min, Double_t &max) const |
| Retrieve the minimum and maximum values in the histogram. More... | |
| virtual Int_t | GetMinimumBin () const |
| Return location of bin with minimum value in the range. More... | |
| virtual Int_t | GetMinimumBin (Int_t &locmix, Int_t &locmiy, Int_t &locmiz) const |
| Return location of bin with minimum value in the range. More... | |
| virtual Double_t | GetMinimumStored () const |
| virtual Int_t | GetNbinsX () const |
| virtual Int_t | GetNbinsY () const |
| virtual Int_t | GetNbinsZ () const |
| virtual Int_t | GetNcells () const |
| virtual Int_t | GetNdivisions (Option_t *axis="X") const |
| Return the number of divisions for "axis". More... | |
| virtual Double_t | GetNormFactor () const |
| virtual char * | GetObjectInfo (Int_t px, Int_t py) const |
| Redefines TObject::GetObjectInfo. More... | |
| Option_t * | GetOption () const |
| TVirtualHistPainter * | GetPainter (Option_t *option="") |
| Return pointer to painter. More... | |
| virtual Int_t | GetQuantiles (Int_t nprobSum, Double_t *q, const Double_t *probSum=0) |
| Compute Quantiles for this histogram Quantile x_q of a probability distribution Function F is defined as. More... | |
| virtual Double_t | GetRandom () const |
| Return a random number distributed according the histogram bin contents. More... | |
| Double_t | GetRMS (Int_t axis=1) const |
| Double_t | GetRMSError (Int_t axis=1) const |
| virtual Double_t | GetSkewness (Int_t axis=1) const |
| EStatOverflows | GetStatOverflows () const |
| virtual void | GetStats (Double_t *stats) const |
| fill the array stats from the contents of this histogram The array stats must be correctly dimensioned in the calling program. More... | |
| virtual Double_t | GetStdDev (Int_t axis=1) const |
| Returns the Standard Deviation (Sigma). More... | |
| virtual Double_t | GetStdDevError (Int_t axis=1) const |
| Return error of standard deviation estimation for Normal distribution. More... | |
| virtual Double_t | GetSumOfWeights () const |
| Return the sum of weights excluding under/overflows. More... | |
| virtual TArrayD * | GetSumw2 () |
| virtual const TArrayD * | GetSumw2 () const |
| virtual Int_t | GetSumw2N () const |
| virtual Float_t | GetTickLength (Option_t *axis="X") const |
| Return the "axis" tick length. More... | |
| virtual Style_t | GetTitleFont (Option_t *axis="X") const |
| Return the "axis" title font. More... | |
| virtual Float_t | GetTitleOffset (Option_t *axis="X") const |
| Return the "axis" title offset. More... | |
| virtual Float_t | GetTitleSize (Option_t *axis="X") const |
| Return the "axis" title size. More... | |
| TAxis * | GetXaxis () |
| Get the behaviour adopted by the object about the statoverflows. See EStatOverflows for more information. More... | |
| const TAxis * | GetXaxis () const |
| TAxis * | GetYaxis () |
| const TAxis * | GetYaxis () const |
| TAxis * | GetZaxis () |
| const TAxis * | GetZaxis () const |
| virtual Double_t | Integral (Int_t binx1, Int_t binx2, Option_t *option="") const |
| Return integral of bin contents in range [binx1,binx2]. More... | |
| virtual Double_t | Integral (Option_t *option="") const |
| Return integral of bin contents. More... | |
| virtual Double_t | IntegralAndError (Int_t binx1, Int_t binx2, Double_t &err, Option_t *option="") const |
| Return integral of bin contents in range [binx1,binx2] and its error. More... | |
| virtual Double_t | Interpolate (Double_t x) |
| Given a point x, approximates the value via linear interpolation based on the two nearest bin centers. More... | |
| virtual Double_t | Interpolate (Double_t x, Double_t y) |
| Interpolate. Not yet implemented. More... | |
| virtual Double_t | Interpolate (Double_t x, Double_t y, Double_t z) |
| Interpolate. Not yet implemented. More... | |
| Bool_t | IsBinOverflow (Int_t bin, Int_t axis=0) const |
| Return true if the bin is overflow. More... | |
| Bool_t | IsBinUnderflow (Int_t bin, Int_t axis=0) const |
| Return true if the bin is underflow. More... | |
| virtual Bool_t | IsHighlight () const |
| virtual Double_t | KolmogorovTest (const TH1 *h2, Option_t *option="") const |
| Statistical test of compatibility in shape between this histogram and h2, using Kolmogorov test. More... | |
| virtual void | LabelsDeflate (Option_t *axis="X") |
| Reduce the number of bins for the axis passed in the option to the number of bins having a label. More... | |
| virtual void | LabelsInflate (Option_t *axis="X") |
| Double the number of bins for axis. More... | |
| virtual void | LabelsOption (Option_t *option="h", Option_t *axis="X") |
| Set option(s) to draw axis with labels. More... | |
| virtual Long64_t | Merge (TCollection *list) |
| Long64_t | Merge (TCollection *list, Option_t *option) |
| Add all histograms in the collection to this histogram. More... | |
| virtual Bool_t | Multiply (const TH1 *h1) |
| Multiply this histogram by h1. More... | |
| virtual Bool_t | Multiply (const TH1 *h1, const TH1 *h2, Double_t c1=1, Double_t c2=1, Option_t *option="") |
| Replace contents of this histogram by multiplication of h1 by h2. More... | |
| virtual Bool_t | Multiply (TF1 *f1, Double_t c1=1) |
| Performs the operation: More... | |
| virtual void | Paint (Option_t *option="") |
| Control routine to paint any kind of histograms. More... | |
| virtual void | Print (Option_t *option="") const |
| Print some global quantities for this histogram. More... | |
| virtual void | PutStats (Double_t *stats) |
| Replace current statistics with the values in array stats. More... | |
| virtual TH1 * | Rebin (Int_t ngroup=2, const char *newname="", const Double_t *xbins=0) |
| Rebin this histogram. More... | |
| virtual void | RebinAxis (Double_t x, TAxis *axis) |
| virtual TH1 * | RebinX (Int_t ngroup=2, const char *newname="") |
| virtual void | Rebuild (Option_t *option="") |
| Using the current bin info, recompute the arrays for contents and errors. More... | |
| virtual void | RecursiveRemove (TObject *obj) |
| Recursively remove object from the list of functions. More... | |
| virtual void | Reset (Option_t *option="") |
| Reset this histogram: contents, errors, etc. More... | |
| virtual void | ResetStats () |
| Reset the statistics including the number of entries and replace with values calculates from bin content. More... | |
| virtual void | SavePrimitive (std::ostream &out, Option_t *option="") |
| Save primitive as a C++ statement(s) on output stream out. More... | |
| virtual void | Scale (Double_t c1=1, Option_t *option="") |
| Multiply this histogram by a constant c1. More... | |
| virtual void | SetAxisColor (Color_t color=1, Option_t *axis="X") |
| Set color to draw the axis line and tick marks. More... | |
| virtual void | SetAxisRange (Double_t xmin, Double_t xmax, Option_t *axis="X") |
| Set the "axis" range. More... | |
| virtual void | SetBarOffset (Float_t offset=0.25) |
| virtual void | SetBarWidth (Float_t width=0.5) |
| virtual void | SetBinContent (Int_t bin, Double_t content) |
| Set bin content see convention for numbering bins in TH1::GetBin In case the bin number is greater than the number of bins and the timedisplay option is set or CanExtendAllAxes(), the number of bins is automatically doubled to accommodate the new bin. More... | |
| virtual void | SetBinContent (Int_t bin, Int_t, Double_t content) |
| virtual void | SetBinContent (Int_t bin, Int_t, Int_t, Double_t content) |
| virtual void | SetBinError (Int_t bin, Double_t error) |
| Set the bin Error Note that this resets the bin eror option to be of Normal Type and for the non-empty bin the bin error is set by default to the square root of their content, but in case the user sets explicitly a new bin content (using SetBinContent) he needs to provide also the error, otherwise a default error = 0 is used. More... | |
| virtual void | SetBinError (Int_t binx, Int_t biny, Double_t error) |
| See convention for numbering bins in TH1::GetBin. More... | |
| virtual void | SetBinError (Int_t binx, Int_t biny, Int_t binz, Double_t error) |
| See convention for numbering bins in TH1::GetBin. More... | |
| virtual void | SetBinErrorOption (EBinErrorOpt type) |
| virtual void | SetBins (Int_t nx, const Double_t *xBins) |
| Redefine x axis parameters with variable bin sizes. More... | |
| virtual void | SetBins (Int_t nx, const Double_t *xBins, Int_t ny, const Double_t *yBins) |
| Redefine x and y axis parameters with variable bin sizes. More... | |
| virtual void | SetBins (Int_t nx, const Double_t *xBins, Int_t ny, const Double_t *yBins, Int_t nz, const Double_t *zBins) |
| Redefine x, y and z axis parameters with variable bin sizes. More... | |
| virtual void | SetBins (Int_t nx, Double_t xmin, Double_t xmax) |
| Redefine x axis parameters. More... | |
| virtual void | SetBins (Int_t nx, Double_t xmin, Double_t xmax, Int_t ny, Double_t ymin, Double_t ymax) |
| Redefine x and y axis parameters. More... | |
| virtual void | SetBins (Int_t nx, Double_t xmin, Double_t xmax, Int_t ny, Double_t ymin, Double_t ymax, Int_t nz, Double_t zmin, Double_t zmax) |
| Redefine x, y and z axis parameters. More... | |
| virtual void | SetBinsLength (Int_t=-1) |
| virtual void | SetBuffer (Int_t buffersize, Option_t *option="") |
| Set the maximum number of entries to be kept in the buffer. More... | |
| virtual UInt_t | SetCanExtend (UInt_t extendBitMask) |
| Make the histogram axes extendable / not extendable according to the bit mask returns the previous bit mask specifying which axes are extendable. More... | |
| virtual void | SetCellContent (Int_t binx, Int_t biny, Double_t content) |
| virtual void | SetCellError (Int_t binx, Int_t biny, Double_t content) |
| virtual void | SetContent (const Double_t *content) |
| Replace bin contents by the contents of array content. More... | |
| virtual void | SetContour (Int_t nlevels, const Double_t *levels=0) |
| Set the number and values of contour levels. More... | |
| virtual void | SetContourLevel (Int_t level, Double_t value) |
| Set value for one contour level. More... | |
| virtual void | SetDirectory (TDirectory *dir) |
| By default when an histogram is created, it is added to the list of histogram objects in the current directory in memory. More... | |
| virtual void | SetEntries (Double_t n) |
| virtual void | SetError (const Double_t *error) |
| Replace bin errors by values in array error. More... | |
| virtual void | SetHighlight (Bool_t set=kTRUE) |
| Set highlight (enable/disable) mode for the histogram by default highlight mode is disable. More... | |
| virtual void | SetLabelColor (Color_t color=1, Option_t *axis="X") |
| Set axis labels color. More... | |
| virtual void | SetLabelFont (Style_t font=62, Option_t *axis="X") |
| Set font number used to draw axis labels. More... | |
| virtual void | SetLabelOffset (Float_t offset=0.005, Option_t *axis="X") |
| Set offset between axis and axis' labels. More... | |
| virtual void | SetLabelSize (Float_t size=0.02, Option_t *axis="X") |
| Set size of axis' labels. More... | |
| virtual void | SetMaximum (Double_t maximum=-1111) |
| virtual void | SetMinimum (Double_t minimum=-1111) |
| virtual void | SetName (const char *name) |
| Change the name of this histogram. More... | |
| virtual void | SetNameTitle (const char *name, const char *title) |
| Change the name and title of this histogram. More... | |
| virtual void | SetNdivisions (Int_t n=510, Option_t *axis="X") |
| Set the number of divisions to draw an axis. More... | |
| virtual void | SetNormFactor (Double_t factor=1) |
| virtual void | SetOption (Option_t *option=" ") |
| void | SetStatOverflows (EStatOverflows statOverflows) |
| virtual void | SetStats (Bool_t stats=kTRUE) |
| Set statistics option on/off. More... | |
| virtual void | SetTickLength (Float_t length=0.02, Option_t *axis="X") |
| Set the axis' tick marks length. More... | |
| virtual void | SetTitle (const char *title) |
| See GetStatOverflows for more information. More... | |
| virtual void | SetTitleFont (Style_t font=62, Option_t *axis="X") |
| Set the axis' title font. More... | |
| virtual void | SetTitleOffset (Float_t offset=1, Option_t *axis="X") |
| Specify a parameter offset to control the distance between the axis and the axis' title. More... | |
| virtual void | SetTitleSize (Float_t size=0.02, Option_t *axis="X") |
| Set the axis' title size. More... | |
| virtual void | SetXTitle (const char *title) |
| virtual void | SetYTitle (const char *title) |
| virtual void | SetZTitle (const char *title) |
| virtual TH1 * | ShowBackground (Int_t niter=20, Option_t *option="same") |
| This function calculates the background spectrum in this histogram. More... | |
| virtual Int_t | ShowPeaks (Double_t sigma=2, Option_t *option="", Double_t threshold=0.05) |
| Interface to TSpectrum::Search. More... | |
| virtual void | Smooth (Int_t ntimes=1, Option_t *option="") |
| Smooth bin contents of this histogram. More... | |
| virtual void | Sumw2 (Bool_t flag=kTRUE) |
| Create structure to store sum of squares of weights. More... | |
| void | UseCurrentStyle () |
| Copy current attributes from/to current style. More... | |
| Public Member Functions inherited from TNamed | |
| TNamed () | |
| TNamed (const char *name, const char *title) | |
| TNamed (const TNamed &named) | |
| TNamed copy ctor. More... | |
| TNamed (const TString &name, const TString &title) | |
| virtual | ~TNamed () |
| TNamed destructor. More... | |
| virtual void | Clear (Option_t *option="") |
| Set name and title to empty strings (""). More... | |
| virtual TObject * | Clone (const char *newname="") const |
| Make a clone of an object using the Streamer facility. More... | |
| virtual Int_t | Compare (const TObject *obj) const |
| Compare two TNamed objects. More... | |
| virtual void | Copy (TObject &named) const |
| Copy this to obj. More... | |
| virtual void | FillBuffer (char *&buffer) |
| Encode TNamed into output buffer. More... | |
| virtual const char * | GetName () const |
| Returns name of object. More... | |
| virtual const char * | GetTitle () const |
| Returns title of object. More... | |
| virtual ULong_t | Hash () const |
| Return hash value for this object. More... | |
| virtual Bool_t | IsSortable () const |
| virtual void | ls (Option_t *option="") const |
| List TNamed name and title. More... | |
| TNamed & | operator= (const TNamed &rhs) |
| TNamed assignment operator. More... | |
| virtual void | Print (Option_t *option="") const |
| Print TNamed name and title. More... | |
| virtual void | SetName (const char *name) |
| Set the name of the TNamed. More... | |
| virtual void | SetNameTitle (const char *name, const char *title) |
| Set all the TNamed parameters (name and title). More... | |
| virtual void | SetTitle (const char *title="") |
| Set the title of the TNamed. More... | |
| virtual Int_t | Sizeof () const |
| Return size of the TNamed part of the TObject. More... | |
| Public Member Functions inherited from TObject | |
| TObject () | |
| TObject constructor. More... | |
| TObject (const TObject &object) | |
| TObject copy ctor. More... | |
| virtual | ~TObject () |
| TObject destructor. More... | |
| void | AbstractMethod (const char *method) const |
| Use this method to implement an "abstract" method that you don't want to leave purely abstract. More... | |
| virtual void | AppendPad (Option_t *option="") |
| Append graphics object to current pad. More... | |
| virtual void | Browse (TBrowser *b) |
| Browse object. May be overridden for another default action. More... | |
| ULong_t | CheckedHash () |
| Check and record whether this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object. More... | |
| virtual const char * | ClassName () const |
| Returns name of class to which the object belongs. More... | |
| virtual void | Clear (Option_t *="") |
| virtual TObject * | Clone (const char *newname="") const |
| Make a clone of an object using the Streamer facility. More... | |
| virtual Int_t | Compare (const TObject *obj) const |
| Compare abstract method. More... | |
| virtual void | Copy (TObject &object) const |
| Copy this to obj. More... | |
| virtual void | Delete (Option_t *option="") |
| Delete this object. More... | |
| virtual Int_t | DistancetoPrimitive (Int_t px, Int_t py) |
| Computes distance from point (px,py) to the object. More... | |
| virtual void | Draw (Option_t *option="") |
| Default Draw method for all objects. More... | |
| virtual void | DrawClass () const |
| Draw class inheritance tree of the class to which this object belongs. More... | |
| virtual TObject * | DrawClone (Option_t *option="") const |
Draw a clone of this object in the current selected pad for instance with: gROOT->SetSelectedPad(gPad). More... | |
| virtual void | Dump () const |
| Dump contents of object on stdout. More... | |
| virtual void | Error (const char *method, const char *msgfmt,...) const |
| Issue error message. More... | |
| virtual void | Execute (const char *method, const char *params, Int_t *error=0) |
| Execute method on this object with the given parameter string, e.g. More... | |
| virtual void | Execute (TMethod *method, TObjArray *params, Int_t *error=0) |
| Execute method on this object with parameters stored in the TObjArray. More... | |
| virtual void | ExecuteEvent (Int_t event, Int_t px, Int_t py) |
| Execute action corresponding to an event at (px,py). More... | |
| virtual void | Fatal (const char *method, const char *msgfmt,...) const |
| Issue fatal error message. More... | |
| virtual TObject * | FindObject (const char *name) const |
| Must be redefined in derived classes. More... | |
| virtual TObject * | FindObject (const TObject *obj) const |
| Must be redefined in derived classes. More... | |
| virtual Option_t * | GetDrawOption () const |
| Get option used by the graphics system to draw this object. More... | |
| virtual const char * | GetIconName () const |
| Returns mime type name of object. More... | |
| virtual const char * | GetName () const |
| Returns name of object. More... | |
| virtual char * | GetObjectInfo (Int_t px, Int_t py) const |
| Returns string containing info about the object at position (px,py). More... | |
| virtual Option_t * | GetOption () const |
| virtual const char * | GetTitle () const |
| Returns title of object. More... | |
| virtual UInt_t | GetUniqueID () const |
| Return the unique object id. More... | |
| virtual Bool_t | HandleTimer (TTimer *timer) |
| Execute action in response of a timer timing out. More... | |
| virtual ULong_t | Hash () const |
| Return hash value for this object. More... | |
| Bool_t | HasInconsistentHash () const |
| Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e. More... | |
| virtual void | Info (const char *method, const char *msgfmt,...) const |
| Issue info message. More... | |
| virtual Bool_t | InheritsFrom (const char *classname) const |
| Returns kTRUE if object inherits from class "classname". More... | |
| virtual Bool_t | InheritsFrom (const TClass *cl) const |
| Returns kTRUE if object inherits from TClass cl. More... | |
| virtual void | Inspect () const |
| Dump contents of this object in a graphics canvas. More... | |
| void | InvertBit (UInt_t f) |
| virtual Bool_t | IsEqual (const TObject *obj) const |
| Default equal comparison (objects are equal if they have the same address in memory). More... | |
| virtual Bool_t | IsFolder () const |
| Returns kTRUE in case object contains browsable objects (like containers or lists of other objects). More... | |
| R__ALWAYS_INLINE Bool_t | IsOnHeap () const |
| virtual Bool_t | IsSortable () const |
| R__ALWAYS_INLINE Bool_t | IsZombie () const |
| virtual void | ls (Option_t *option="") const |
| The ls function lists the contents of a class on stdout. More... | |
| void | MayNotUse (const char *method) const |
| Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary). More... | |
| virtual Bool_t | Notify () |
| This method must be overridden to handle object notification. More... | |
| void | Obsolete (const char *method, const char *asOfVers, const char *removedFromVers) const |
| Use this method to declare a method obsolete. More... | |
| void | operator delete (void *ptr) |
| Operator delete. More... | |
| void | operator delete[] (void *ptr) |
| Operator delete []. More... | |
| void * | operator new (size_t sz) |
| void * | operator new (size_t sz, void *vp) |
| void * | operator new[] (size_t sz) |
| void * | operator new[] (size_t sz, void *vp) |
| TObject & | operator= (const TObject &rhs) |
| TObject assignment operator. More... | |
| virtual void | Paint (Option_t *option="") |
| This method must be overridden if a class wants to paint itself. More... | |
| virtual void | Pop () |
| Pop on object drawn in a pad to the top of the display list. More... | |
| virtual void | Print (Option_t *option="") const |
| This method must be overridden when a class wants to print itself. More... | |
| virtual Int_t | Read (const char *name) |
| Read contents of object with specified name from the current directory. More... | |
| virtual void | RecursiveRemove (TObject *obj) |
| Recursively remove this object from a list. More... | |
| void | ResetBit (UInt_t f) |
| virtual void | SaveAs (const char *filename="", Option_t *option="") const |
| Save this object in the file specified by filename. More... | |
| virtual void | SavePrimitive (std::ostream &out, Option_t *option="") |
| Save a primitive as a C++ statement(s) on output stream "out". More... | |
| void | SetBit (UInt_t f) |
| void | SetBit (UInt_t f, Bool_t set) |
| Set or unset the user status bits as specified in f. More... | |
| virtual void | SetDrawOption (Option_t *option="") |
| Set drawing option for object. More... | |
| virtual void | SetUniqueID (UInt_t uid) |
| Set the unique object id. More... | |
| virtual void | SysError (const char *method, const char *msgfmt,...) const |
| Issue system error message. More... | |
| R__ALWAYS_INLINE Bool_t | TestBit (UInt_t f) const |
| Int_t | TestBits (UInt_t f) const |
| virtual void | UseCurrentStyle () |
| Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked. More... | |
| virtual void | Warning (const char *method, const char *msgfmt,...) const |
| Issue warning message. More... | |
| virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) |
| Write this object to the current directory. More... | |
| virtual Int_t | Write (const char *name=0, Int_t option=0, Int_t bufsize=0) const |
| Write this object to the current directory. More... | |
| Public Member Functions inherited from TAttLine | |
| TAttLine () | |
| AttLine default constructor. More... | |
| TAttLine (Color_t lcolor, Style_t lstyle, Width_t lwidth) | |
| AttLine normal constructor. More... | |
| virtual | ~TAttLine () |
| AttLine destructor. More... | |
| void | Copy (TAttLine &attline) const |
| Copy this line attributes to a new TAttLine. More... | |
| Int_t | DistancetoLine (Int_t px, Int_t py, Double_t xp1, Double_t yp1, Double_t xp2, Double_t yp2) |
| Compute distance from point px,py to a line. More... | |
| virtual Color_t | GetLineColor () const |
| Return the line color. More... | |
| virtual Style_t | GetLineStyle () const |
| Return the line style. More... | |
| virtual Width_t | GetLineWidth () const |
| Return the line width. More... | |
| virtual void | Modify () |
| Change current line attributes if necessary. More... | |
| virtual void | ResetAttLine (Option_t *option="") |
| Reset this line attributes to default values. More... | |
| virtual void | SaveLineAttributes (std::ostream &out, const char *name, Int_t coldef=1, Int_t stydef=1, Int_t widdef=1) |
| Save line attributes as C++ statement(s) on output stream out. More... | |
| virtual void | SetLineAttributes () |
| Invoke the DialogCanvas Line attributes. More... | |
| virtual void | SetLineColor (Color_t lcolor) |
| Set the line color. More... | |
| virtual void | SetLineColorAlpha (Color_t lcolor, Float_t lalpha) |
| Set a transparent line color. More... | |
| virtual void | SetLineStyle (Style_t lstyle) |
| Set the line style. More... | |
| virtual void | SetLineWidth (Width_t lwidth) |
| Set the line width. More... | |
| Public Member Functions inherited from TAttFill | |
| TAttFill () | |
| AttFill default constructor. More... | |
| TAttFill (Color_t fcolor, Style_t fstyle) | |
| AttFill normal constructor. More... | |
| virtual | ~TAttFill () |
| AttFill destructor. More... | |
| void | Copy (TAttFill &attfill) const |
| Copy this fill attributes to a new TAttFill. More... | |
| virtual Color_t | GetFillColor () const |
| Return the fill area color. More... | |
| virtual Style_t | GetFillStyle () const |
| Return the fill area style. More... | |
| virtual Bool_t | IsTransparent () const |
| virtual void | Modify () |
| Change current fill area attributes if necessary. More... | |
| virtual void | ResetAttFill (Option_t *option="") |
| Reset this fill attributes to default values. More... | |
| virtual void | SaveFillAttributes (std::ostream &out, const char *name, Int_t coldef=1, Int_t stydef=1001) |
| Save fill attributes as C++ statement(s) on output stream out. More... | |
| virtual void | SetFillAttributes () |
| Invoke the DialogCanvas Fill attributes. More... | |
| virtual void | SetFillColor (Color_t fcolor) |
| Set the fill area color. More... | |
| virtual void | SetFillColorAlpha (Color_t fcolor, Float_t falpha) |
| Set a transparent fill color. More... | |
| virtual void | SetFillStyle (Style_t fstyle) |
| Set the fill area style. More... | |
| Public Member Functions inherited from TAttMarker | |
| TAttMarker () | |
| TAttMarker default constructor. More... | |
| TAttMarker (Color_t color, Style_t style, Size_t msize) | |
| TAttMarker normal constructor. More... | |
| virtual | ~TAttMarker () |
| TAttMarker destructor. More... | |
| void | Copy (TAttMarker &attmarker) const |
| Copy this marker attributes to a new TAttMarker. More... | |
| virtual Color_t | GetMarkerColor () const |
| Return the marker color. More... | |
| virtual Size_t | GetMarkerSize () const |
| Return the marker size. More... | |
| virtual Style_t | GetMarkerStyle () const |
| Return the marker style. More... | |
| virtual void | Modify () |
| Change current marker attributes if necessary. More... | |
| virtual void | ResetAttMarker (Option_t *toption="") |
| Reset this marker attributes to the default values. More... | |
| virtual void | SaveMarkerAttributes (std::ostream &out, const char *name, Int_t coldef=1, Int_t stydef=1, Int_t sizdef=1) |
| Save line attributes as C++ statement(s) on output stream out. More... | |
| virtual void | SetMarkerAttributes () |
| Invoke the DialogCanvas Marker attributes. More... | |
| virtual void | SetMarkerColor (Color_t mcolor=1) |
| Set the marker color. More... | |
| virtual void | SetMarkerColorAlpha (Color_t mcolor, Float_t malpha) |
| Set a transparent marker color. More... | |
| virtual void | SetMarkerSize (Size_t msize=1) |
| Set the marker size. More... | |
| virtual void | SetMarkerStyle (Style_t mstyle=1) |
| Set the marker style. More... | |
Protected Types | |
| enum | { kNOverflow = 9 } |
Protected Member Functions | |
| void | AddBinToPartition (TH2PolyBin *bin) |
| For the 3D Painter. More... | |
| void | Initialize (Double_t xlow, Double_t xup, Double_t ylow, Double_t yup, Int_t n, Int_t m) |
| Initializes the TH2Poly object. This method is called by the constructor. More... | |
| Bool_t | IsIntersecting (TH2PolyBin *bin, Double_t xclipl, Double_t xclipr, Double_t yclipb, Double_t yclipt) |
| Returns kTRUE if the input bin is intersecting with the input rectangle (xclipl, xclipr, yclipb, yclipt) More... | |
| Bool_t | IsIntersectingPolygon (Int_t bn, Double_t *x, Double_t *y, Double_t xclipl, Double_t xclipr, Double_t yclipb, Double_t yclipt) |
| Returns kTRUE if the input polygon (bn, x, y) is intersecting with the input rectangle (xclipl, xclipr, yclipb, yclipt) More... | |
| virtual Double_t | RetrieveBinContent (Int_t bin) const |
| Raw retrieval of bin content on internal data structure see convention for numbering bins in TH1::GetBin. More... | |
| virtual void | UpdateBinContent (Int_t bin, Double_t content) |
| Raw update of bin content on internal data structure see convention for numbering bins in TH1::GetBin. More... | |
| Protected Member Functions inherited from TH2 | |
| TH2 () | |
| Constructor. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Int_t nbinsy, const Double_t *ybins) | |
| See comments in the TH1 base class constructors. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins, Int_t nbinsy, Double_t ylow, Double_t yup) | |
| See comments in the TH1 base class constructors. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, const Float_t *xbins, Int_t nbinsy, const Float_t *ybins) | |
| See comments in the TH1 base class constructors. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Int_t nbinsy, const Double_t *ybins) | |
| See comments in the TH1 base class constructors. More... | |
| TH2 (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup, Int_t nbinsy, Double_t ylow, Double_t yup) | |
| See comments in the TH1 base class constructors. More... | |
| virtual Int_t | BufferFill (Double_t x, Double_t y, Double_t w) |
| accumulate arguments in buffer. More... | |
| Int_t | BufferFill (Double_t, Double_t) |
| accumulate arguments in buffer. More... | |
| virtual void | DoFitSlices (bool onX, TF1 *f1, Int_t firstbin, Int_t lastbin, Int_t cut, Option_t *option, TObjArray *arr) |
| virtual TProfile * | DoProfile (bool onX, const char *name, Int_t firstbin, Int_t lastbin, Option_t *option) const |
| virtual TH1D * | DoProjection (bool onX, const char *name, Int_t firstbin, Int_t lastbin, Option_t *option) const |
| Internal (protected) method for performing projection on the X or Y axis called by ProjectionX or ProjectionY. More... | |
| virtual TH1D * | DoQuantiles (bool onX, const char *name, Double_t prob) const |
| Implementation of quantiles for x or y. More... | |
| Int_t | Fill (const char *, Double_t) |
| Increment bin with namex with a weight w. More... | |
| Int_t | Fill (Double_t) |
| Invalid Fill method. More... | |
| Protected Member Functions inherited from TH1 | |
| TH1 () | |
| Histogram default constructor. More... | |
| TH1 (const char *name, const char *title, Int_t nbinsx, const Double_t *xbins) | |
| Normal constructor for variable bin size histograms. More... | |
| TH1 (const char *name, const char *title, Int_t nbinsx, const Float_t *xbins) | |
| Normal constructor for variable bin size histograms. More... | |
| TH1 (const char *name, const char *title, Int_t nbinsx, Double_t xlow, Double_t xup) | |
| Normal constructor for fix bin size histograms. More... | |
| virtual Int_t | AutoP2FindLimits (Double_t min, Double_t max) |
| Buffer-based estimate of the histogram range using the power of 2 algorithm. More... | |
| virtual Int_t | BufferFill (Double_t x, Double_t w) |
| accumulate arguments in buffer. More... | |
| virtual void | DoFillN (Int_t ntimes, const Double_t *x, const Double_t *w, Int_t stride=1) |
| Internal method to fill histogram content from a vector called directly by TH1::BufferEmpty. More... | |
| virtual Double_t | DoIntegral (Int_t ix1, Int_t ix2, Int_t iy1, Int_t iy2, Int_t iz1, Int_t iz2, Double_t &err, Option_t *opt, Bool_t doerr=kFALSE) const |
| Internal function compute integral and optionally the error between the limits specified by the bin number values working for all histograms (1D, 2D and 3D) More... | |
| virtual Bool_t | FindNewAxisLimits (const TAxis *axis, const Double_t point, Double_t &newMin, Double_t &newMax) |
| finds new limits for the axis so that point is within the range and the limits are compatible with the previous ones (see TH1::Merge). More... | |
| virtual Double_t | GetBinErrorSqUnchecked (Int_t bin) const |
| Bool_t | GetStatOverflowsBehaviour () const |
| Bool_t | IsEmpty () const |
| Check if an histogram is empty (this a protected method used mainly by TH1Merger ) More... | |
| virtual Double_t | RetrieveBinContent (Int_t bin) const |
| Raw retrieval of bin content on internal data structure see convention for numbering bins in TH1::GetBin. More... | |
| virtual void | SavePrimitiveHelp (std::ostream &out, const char *hname, Option_t *option="") |
| Helper function for the SavePrimitive functions from TH1 or classes derived from TH1, eg TProfile, TProfile2D. More... | |
| virtual void | UpdateBinContent (Int_t bin, Double_t content) |
| Raw update of bin content on internal data structure see convention for numbering bins in TH1::GetBin. More... | |
| Protected Member Functions inherited from TObject | |
| virtual void | DoError (int level, const char *location, const char *fmt, va_list va) const |
| Interface to ErrorHandler (protected). More... | |
| void | MakeZombie () |
Protected Attributes | |
| Bool_t | fBinContentChanged |
| For the 3D Painter. More... | |
| TList * | fBins |
| TList * | fCells |
| Int_t | fCellX |
| Int_t | fCellY |
| Bool_t * | fCompletelyInside |
| Bool_t | fFloat |
| Bool_t * | fIsEmpty |
| Int_t | fNCells |
| Bool_t | fNewBinAdded |
| Double_t | fOverflow [kNOverflow] |
| Double_t | fStepX |
| Double_t | fStepY |
| Protected Attributes inherited from TH2 | |
| Double_t | fScalefactor |
| Double_t | fTsumwxy |
| Double_t | fTsumwy |
| Double_t | fTsumwy2 |
| Protected Attributes inherited from TH1 | |
| Short_t | fBarOffset |
| (1000*offset) for bar charts or legos More... | |
| Short_t | fBarWidth |
| (1000*width) for bar charts or legos More... | |
| EBinErrorOpt | fBinStatErrOpt |
| option for bin statistical errors More... | |
| Double_t * | fBuffer |
| [fBufferSize] entry buffer More... | |
| Int_t | fBufferSize |
| fBuffer size More... | |
| TArrayD | fContour |
| Array to display contour levels. More... | |
| Int_t | fDimension |
| !Histogram dimension (1, 2 or 3 dim) More... | |
| TDirectory * | fDirectory |
| !Pointer to directory holding this histogram More... | |
| Double_t | fEntries |
| Number of entries. More... | |
| TList * | fFunctions |
| ->Pointer to list of functions (fits and user) More... | |
| Double_t * | fIntegral |
| !Integral of bins used by GetRandom More... | |
| Double_t | fMaximum |
| Maximum value for plotting. More... | |
| Double_t | fMinimum |
| Minimum value for plotting. More... | |
| Int_t | fNcells |
| number of bins(1D), cells (2D) +U/Overflows More... | |
| Double_t | fNormFactor |
| Normalization factor. More... | |
| TString | fOption |
| histogram options More... | |
| TVirtualHistPainter * | fPainter |
| !pointer to histogram painter More... | |
| EStatOverflows | fStatOverflows |
| per object flag to use under/overflows in statistics More... | |
| TArrayD | fSumw2 |
| Array of sum of squares of weights. More... | |
| Double_t | fTsumw |
| Total Sum of weights. More... | |
| Double_t | fTsumw2 |
| Total Sum of squares of weights. More... | |
| Double_t | fTsumwx |
| Total Sum of weight*X. More... | |
| Double_t | fTsumwx2 |
| Total Sum of weight*X*X. More... | |
| TAxis | fXaxis |
| X axis descriptor. More... | |
| TAxis | fYaxis |
| Y axis descriptor. More... | |
| TAxis | fZaxis |
| Z axis descriptor. More... | |
| Protected Attributes inherited from TNamed | |
| TString | fName |
| TString | fTitle |
| Protected Attributes inherited from TAttLine | |
| Color_t | fLineColor |
| Line color. More... | |
| Style_t | fLineStyle |
| Line style. More... | |
| Width_t | fLineWidth |
| Line width. More... | |
| Protected Attributes inherited from TAttFill | |
| Color_t | fFillColor |
| Fill area color. More... | |
| Style_t | fFillStyle |
| Fill area style. More... | |
| Protected Attributes inherited from TAttMarker | |
| Color_t | fMarkerColor |
| Marker color. More... | |
| Size_t | fMarkerSize |
| Marker size. More... | |
| Style_t | fMarkerStyle |
| Marker style. More... | |
Additional Inherited Members | |
| Public Types inherited from TH1 | |
| enum | { kNoAxis = 0 , kXaxis = BIT(0) , kYaxis = BIT(1) , kZaxis = BIT(2) , kAllAxes = kXaxis | kYaxis | kZaxis } |
| enum | { kNstat = 13 } |
| enum | EBinErrorOpt { kNormal = 0 , kPoisson = 1 , kPoisson2 = 2 } |
| enum | EStatOverflows { kIgnore = 0 , kConsider = 1 , kNeutral = 2 } |
| Enumeration specifying the way to treat statoverflow. More... | |
| enum | EStatusBits { kNoStats = BIT(9) , kUserContour = BIT(10) , kLogX = BIT(15) , kIsZoomed = BIT(16) , kNoTitle = BIT(17) , kIsAverage = BIT(18) , kIsNotW = BIT(19) , kAutoBinPTwo = BIT(20) , kIsHighlight = BIT(21) } |
| Public Types inherited from TObject | |
| enum | { kIsOnHeap = 0x01000000 , kNotDeleted = 0x02000000 , kZombie = 0x04000000 , kInconsistent = 0x08000000 , kBitMask = 0x00ffffff } |
| enum | { kSingleKey = BIT(0) , kOverwrite = BIT(1) , kWriteDelete = BIT(2) } |
| enum | EDeprecatedStatusBits { kObjInCanvas = BIT(3) } |
| enum | EStatusBits { kCanDelete = BIT(0) , kMustCleanup = BIT(3) , kIsReferenced = BIT(4) , kHasUUID = BIT(5) , kCannotPick = BIT(6) , kNoContextMenu = BIT(8) , kInvalidObject = BIT(13) } |
| Static Public Member Functions inherited from TH1 | |
| static void | AddDirectory (Bool_t add=kTRUE) |
| Sets the flag controlling the automatic add of histograms in memory. More... | |
| static Bool_t | AddDirectoryStatus () |
| Static function: cannot be inlined on Windows/NT. More... | |
| static Int_t | FitOptionsMake (Option_t *option, Foption_t &Foption) |
| Decode string choptin and fill fitOption structure. More... | |
| static Int_t | GetDefaultBufferSize () |
| Static function return the default buffer size for automatic histograms the parameter fgBufferSize may be changed via SetDefaultBufferSize. More... | |
| static Bool_t | GetDefaultSumw2 () |
| Return kTRUE if TH1::Sumw2 must be called when creating new histograms. More... | |
| static void | SetDefaultBufferSize (Int_t buffersize=1000) |
| Static function to set the default buffer size for automatic histograms. More... | |
| static void | SetDefaultSumw2 (Bool_t sumw2=kTRUE) |
When this static function is called with sumw2=kTRUE, all new histograms will automatically activate the storage of the sum of squares of errors, ie TH1::Sumw2 is automatically called. More... | |
| static void | SmoothArray (Int_t NN, Double_t *XX, Int_t ntimes=1) |
| Smooth array xx, translation of Hbook routine hsmoof.F based on algorithm 353QH twice presented by J. More... | |
| static void | StatOverflows (Bool_t flag=kTRUE) |
| if flag=kTRUE, underflows and overflows are used by the Fill functions in the computation of statistics (mean value, StdDev). More... | |
| static TH1 * | TransformHisto (TVirtualFFT *fft, TH1 *h_output, Option_t *option) |
| For a given transform (first parameter), fills the histogram (second parameter) with the transform output data, specified in the third parameter If the 2nd parameter h_output is empty, a new histogram (TH1D or TH2D) is created and the user is responsible for deleting it. More... | |
| Static Public Member Functions inherited from TObject | |
| static Long_t | GetDtorOnly () |
| Return destructor only flag. More... | |
| static Bool_t | GetObjectStat () |
| Get status of object stat flag. More... | |
| static void | SetDtorOnly (void *obj) |
| Set destructor only flag. More... | |
| static void | SetObjectStat (Bool_t stat) |
| Turn on/off tracking of objects in the TObjectTable. More... | |
| Static Protected Member Functions inherited from TH1 | |
| static Int_t | AutoP2GetBins (Int_t n) |
| Auxilliary function to get the next power of 2 integer value larger then n. More... | |
| static Double_t | AutoP2GetPower2 (Double_t x, Bool_t next=kTRUE) |
| Auxilliary function to get the power of 2 next (larger) or previous (smaller) a given x. More... | |
| static bool | CheckAxisLimits (const TAxis *a1, const TAxis *a2) |
| Check that the axis limits of the histograms are the same. More... | |
| static bool | CheckBinLabels (const TAxis *a1, const TAxis *a2) |
| Check that axis have same labels. More... | |
| static bool | CheckBinLimits (const TAxis *a1, const TAxis *a2) |
| Check bin limits. More... | |
| static bool | CheckConsistency (const TH1 *h1, const TH1 *h2) |
| Check histogram compatibility. More... | |
| static bool | CheckConsistentSubAxes (const TAxis *a1, Int_t firstBin1, Int_t lastBin1, const TAxis *a2, Int_t firstBin2=0, Int_t lastBin2=0) |
| Check that two sub axis are the same. More... | |
| static bool | CheckEqualAxes (const TAxis *a1, const TAxis *a2) |
| Check that the axis are the same. More... | |
| static Bool_t | RecomputeAxisLimits (TAxis &destAxis, const TAxis &anAxis) |
| Finds new limits for the axis for the Merge function. More... | |
| static Bool_t | SameLimitsAndNBins (const TAxis &axis1, const TAxis &axis2) |
| Same limits and bins. More... | |
| Static Protected Attributes inherited from TH1 | |
| static Bool_t | fgAddDirectory = kTRUE |
| !flag to add histograms to the directory More... | |
| static Int_t | fgBufferSize = 1000 |
| !default buffer size for automatic histograms More... | |
| static Bool_t | fgDefaultSumw2 = kFALSE |
| !flag to call TH1::Sumw2 automatically at histogram creation time More... | |
| static Bool_t | fgStatOverflows = kFALSE |
| !flag to use under/overflows in statistics More... | |
#include <TH2Poly.h>
| TH2Poly::TH2Poly | ( | ) |
Default Constructor. No boundaries specified.
Definition at line 146 of file TH2Poly.cxx.
| TH2Poly::TH2Poly | ( | const char * | name, |
| const char * | title, | ||
| Double_t | xlow, | ||
| Double_t | xup, | ||
| Double_t | ylow, | ||
| Double_t | yup | ||
| ) |
Constructor with specified name and boundaries, but no partition cell number.
Definition at line 158 of file TH2Poly.cxx.
| TH2Poly::TH2Poly | ( | const char * | name, |
| const char * | title, | ||
| Int_t | nX, | ||
| Double_t | xlow, | ||
| Double_t | xup, | ||
| Int_t | nY, | ||
| Double_t | ylow, | ||
| Double_t | yup | ||
| ) |
Constructor with specified name and boundaries and partition cell number.
Definition at line 170 of file TH2Poly.cxx.
|
virtual |
Destructor.
Definition at line 183 of file TH2Poly.cxx.
Replace contents of this histogram by the addition of h1 and h2.
Reimplemented from TH1.
Definition at line 379 of file TH2Poly.cxx.
Performs the operation: this = this + c1*h1.
Reimplemented from TH1.
Definition at line 287 of file TH2Poly.cxx.
Performs the operation: this = this + c1*f1.
Reimplemented from TH1.
Definition at line 370 of file TH2Poly.cxx.
Add a new bin to the histogram.
The bin shape is a rectangle. It returns the bin number of the bin in the histogram.
Definition at line 275 of file TH2Poly.cxx.
Adds a new bin to the histogram.
The number of vertices and their (x,y) coordinates are required as input. It returns the bin number in the histogram.
Definition at line 264 of file TH2Poly.cxx.
Adds a new bin to the histogram.
It can be any object having the method IsInside(). It returns the bin number in the histogram. It returns 0 if it failed to add. To allow the histogram limits to expand when a bin outside the limits is added, call SetFloat() before adding the bin.
Definition at line 219 of file TH2Poly.cxx.
|
protected |
For the 3D Painter.
Adds the input bin into the partition cell matrix.
This method is called in AddBin() and ChangePartition().
Definition at line 389 of file TH2Poly.cxx.
Changes the number of partition cells in the histogram.
Deletes the old partition and constructs a new one.
Definition at line 461 of file TH2Poly.cxx.
| void TH2Poly::ClearBinContents | ( | ) |
Clears the contents of all bins in the histogram.
Definition at line 512 of file TH2Poly.cxx.
|
virtual |
Make a complete copy of the underlying object.
If 'newname' is set, the copy's name will be set to that name.
Reimplemented from TH1.
Definition at line 500 of file TH2Poly.cxx.
|
virtual |
Create appropriate histogram bin.
e.g. TH2Poly creates TH2PolyBin, TProfile2Poly creates TProfile2PolyBin This is done so that TH2Poly::AddBin does not have to be duplicated, but only create needs to be reimplemented for additional histogram types
Reimplemented in TProfile2Poly.
Definition at line 199 of file TH2Poly.cxx.
Increment cell defined by namex,namey by a weight w.
The function returns the corresponding global bin number which has its content incremented by w
Reimplemented from TH2.
Reimplemented in TProfile2Poly.
Increment cell defined by namex,y by a weight w.
The function returns the corresponding global bin number which has its content incremented by w
Reimplemented from TH2.
Reimplemented in TProfile2Poly.
Increment the bin named "name" by w.
Reimplemented from TH2.
Reimplemented in TProfile2Poly.
Definition at line 685 of file TH2Poly.cxx.
Increment the bin containing (x,y) by 1.
Uses the partitioning algorithm.
Reimplemented from TH2.
Reimplemented in TProfile2Poly.
Definition at line 609 of file TH2Poly.cxx.
Increment the bin containing (x,y) by w.
Uses the partitioning algorithm.
Reimplemented from TH2.
Reimplemented in TProfile2Poly, and TProfile2Poly.
Definition at line 618 of file TH2Poly.cxx.
Increment cell defined by x,namey by a weight w.
The function returns the corresponding global bin number which has its content incremented by w
Reimplemented from TH2.
Reimplemented in TProfile2Poly.
|
virtual |
Fills a 2-D histogram with an array of values and weights.
| [in] | ntimes | number of entries in arrays x and w (array size must be ntimes*stride) |
| [in] | x | array of x values to be histogrammed |
| [in] | y | array of y values to be histogrammed |
| [in] | w | array of weights |
| [in] | stride | step size through arrays x, y and w |
Reimplemented from TH2.
Definition at line 716 of file TH2Poly.cxx.
|
inlinevirtual |
Fill this histogram with an array x and weights w.
| [in] | ntimes | number of entries in arrays x and w (array size must be ntimes*stride) |
| [in] | x | array of values to be histogrammed |
| [in] | w | array of weighs |
| [in] | stride | step size through arrays x and w |
If the weight is not equal to 1, the storage of the sum of squares of weights is automatically triggered and the sum of the squares of weights is incremented by \( w^2 \) in the bin corresponding to x. if w is NULL each entry is assumed a weight=1
Reimplemented from TH2.
Returns the bin number of the bin at the given coordinate.
-1 to -9 are the overflow and underflow bins. overflow bin -5 is the unbinned areas in the histogram (also called "the sea"). The third parameter can be left blank. The overflow/underflow bins are:
where -5 means is the "sea" bin (i.e. unbinned areas)
Reimplemented from TH1.
Definition at line 566 of file TH2Poly.cxx.
Returns the content of the input bin For the overflow/underflow/sea bins:
where -5 is the "sea" bin (i.e. unbinned areas)
Reimplemented from TH2.
Reimplemented in TProfile2Poly, and TProfile2Poly.
Definition at line 766 of file TH2Poly.cxx.
Returns the value of error associated to bin number bin.
If the sum of squares of weights has been defined (via Sumw2), this function returns the sqrt(sum of w2). otherwise it returns the sqrt(contents) for this bin.
Reimplemented from TH1.
Reimplemented in TProfile2Poly, and TProfile2Poly.
Definition at line 779 of file TH2Poly.cxx.
| const char * TH2Poly::GetBinName | ( | Int_t | bin | ) | const |
Returns the bin name.
Definition at line 795 of file TH2Poly.cxx.
| const char * TH2Poly::GetBinTitle | ( | Int_t | bin | ) | const |
Returns the bin title.
Definition at line 805 of file TH2Poly.cxx.
| Double_t TH2Poly::GetMaximum | ( | ) | const |
Returns the maximum value of the histogram.
Definition at line 815 of file TH2Poly.cxx.
Returns the maximum value of the histogram that is less than maxval.
Reimplemented from TH1.
Definition at line 839 of file TH2Poly.cxx.
| Double_t TH2Poly::GetMinimum | ( | ) | const |
Returns the minimum value of the histogram.
Definition at line 863 of file TH2Poly.cxx.
Returns the minimum value of the histogram that is greater than minval.
Reimplemented from TH1.
Definition at line 887 of file TH2Poly.cxx.
Fill the array stats from the contents of this histogram The array stats must be correctly dimensioned in the calling program.
If no axis-subranges are specified (via TAxis::SetRange), the array stats is simply a copy of the statistics quantities computed at filling time. If sub-ranges are specified, the function recomputes these quantities from the bin contents in the current axis ranges.
Note that the mean value/StdDev is computed using the bins in the currently defined ranges (see TAxis::SetRange). By default the ranges include all bins from 1 to nbins included, excluding underflows and overflows. To force the underflows and overflows in the computation, one must call the static function TH1::StatOverflows(kTRUE) before filling the histogram.
Reimplemented from TH2.
Reimplemented in TProfile2Poly.
Definition at line 1283 of file TH2Poly.cxx.
Bins the histogram using a honeycomb structure.
Definition at line 911 of file TH2Poly.cxx.
|
protected |
Initializes the TH2Poly object. This method is called by the constructor.
Definition at line 959 of file TH2Poly.cxx.
Returns the integral of bin contents.
By default the integral is computed as the sum of bin contents. If option "width" or "area" is specified, the integral is the sum of the bin contents multiplied by the area of the bin.
Reimplemented from TH2.
Definition at line 730 of file TH2Poly.cxx.
Return "true" if the point (x,y) is inside the bin of binnr.
Definition at line 1275 of file TH2Poly.cxx.
|
protected |
Returns kTRUE if the input bin is intersecting with the input rectangle (xclipl, xclipr, yclipb, yclipt)
Definition at line 1009 of file TH2Poly.cxx.
|
protected |
Returns kTRUE if the input polygon (bn, x, y) is intersecting with the input rectangle (xclipl, xclipr, yclipb, yclipt)
Definition at line 1050 of file TH2Poly.cxx.
|
virtual |
Merge TH2Polys Given the special nature of the TH2Poly, the merge is implemented in terms of subsequent TH2Poly::Add calls.
Reimplemented from TH1.
Reimplemented in TProfile2Poly.
Definition at line 1164 of file TH2Poly.cxx.
Reset this histogram: contents, errors, etc.
Reimplemented from TH2.
Reimplemented in TProfile2Poly.
Definition at line 536 of file TH2Poly.cxx.
Raw retrieval of bin content on internal data structure see convention for numbering bins in TH1::GetBin.
Reimplemented from TH1.
Save primitive as a C++ statement(s) on output stream out.
Reimplemented from TH1.
Definition at line 1178 of file TH2Poly.cxx.
Multiply this histogram by a constant c1.
Reimplemented from TH1.
Definition at line 1238 of file TH2Poly.cxx.
Sets the contents of the input bin to the input content Negative values between -1 and -9 are for the overflows and the sea.
Reimplemented from TH2.
Definition at line 1252 of file TH2Poly.cxx.
When set to kTRUE, allows the histogram to expand if a bin outside the limits is added.
Definition at line 1267 of file TH2Poly.cxx.
Raw update of bin content on internal data structure see convention for numbering bins in TH1::GetBin.
Reimplemented from TH1.
|
protected |
|
protected |
ROOT 6.16/01 - Reference Guide Generated on Sun Dec 19 2021 22:31:22 (GVA Time) using Doxygen 1.9.3 (234637167bd5d39d32bf51f755d58253441f123a).