Logo ROOT   6.14/05
Reference Guide
List of all members | Public Member Functions | Protected Attributes | List of all members
TGeoTrap Class Reference

TRAP is a general trapezoid, i.e.

one for which the faces perpendicular to z are trapezia and their centres are not the same x, y. It has 11 parameters: the half length in z, the polar angles from the centre of the face at low z to that at high z, H1 the half length in y at low z, LB1 the half length in x at low z and y low edge, LB2 the half length in x at low z and y high edge, TH1 the angle w.r.t. the y axis from the centre of low y edge to the centre of the high y edge, and H2, LB2, LH2, TH2, the corresponding quantities at high z.

{
TCanvas *c = new TCanvas("c", "c",0,0,600,600);
new TGeoManager("trap", "poza10");
TGeoMaterial *mat = new TGeoMaterial("Al", 26.98,13,2.7);
TGeoMedium *med = new TGeoMedium("MED",1,mat);
TGeoVolume *top = gGeoManager->MakeBox("TOP",med,100,100,100);
gGeoManager->SetTopVolume(top);
TGeoVolume *vol = gGeoManager->MakeTrap("Trap",med, 30,15,30,20,10,15,0,20,10,15,0);
vol->SetLineWidth(2);
top->AddNode(vol,1);
gGeoManager->CloseGeometry();
gGeoManager->SetNsegments(80);
top->Draw();
TView *view = gPad->GetView();
view->ShowAxis();
}
pict1_TGeoArb8_003.png

Definition at line 89 of file TGeoArb8.h.

Public Member Functions

 TGeoTrap ()
 Default ctor. More...
 
 TGeoTrap (Double_t dz, Double_t theta, Double_t phi)
 Constructor providing just a range in Z, theta and phi. More...
 
 TGeoTrap (Double_t dz, Double_t theta, Double_t phi, Double_t h1, Double_t bl1, Double_t tl1, Double_t alpha1, Double_t h2, Double_t bl2, Double_t tl2, Double_t alpha2)
 Normal constructor. More...
 
 TGeoTrap (const char *name, Double_t dz, Double_t theta, Double_t phi, Double_t h1, Double_t bl1, Double_t tl1, Double_t alpha1, Double_t h2, Double_t bl2, Double_t tl2, Double_t alpha2)
 Constructor with name. More...
 
virtual ~TGeoTrap ()
 Destructor. More...
 
virtual Double_t DistFromInside (const Double_t *point, const Double_t *dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=0) const
 Compute distance from inside point to surface of the trapezoid. More...
 
virtual void DistFromInside_v (const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize, Double_t *step) const
 Compute distance from array of input points having directions specified by dirs. Store output in dists. More...
 
virtual Double_t DistFromOutside (const Double_t *point, const Double_t *dir, Int_t iact=1, Double_t step=TGeoShape::Big(), Double_t *safe=0) const
 Compute distance from outside point to surface of the trapezoid. More...
 
virtual void DistFromOutside_v (const Double_t *points, const Double_t *dirs, Double_t *dists, Int_t vecsize, Double_t *step) const
 Compute distance from array of input points having directions specified by dirs. Store output in dists. More...
 
virtual TGeoVolumeDivide (TGeoVolume *voldiv, const char *divname, Int_t iaxis, Int_t ndiv, Double_t start, Double_t step)
 Divide this trapezoid shape belonging to volume "voldiv" into ndiv volumes called divname, from start position with the given step. More...
 
Double_t GetAlpha1 () const
 
Double_t GetAlpha2 () const
 
Double_t GetBl1 () const
 
Double_t GetBl2 () const
 
Double_t GetH1 () const
 
Double_t GetH2 () const
 
virtual TGeoShapeGetMakeRuntimeShape (TGeoShape *mother, TGeoMatrix *mat) const
 In case shape has some negative parameters, these have to be computed in order to fit the mother. More...
 
Double_t GetPhi () const
 
Double_t GetTheta () const
 
Double_t GetTl1 () const
 
Double_t GetTl2 () const
 
virtual Double_t Safety (const Double_t *point, Bool_t in=kTRUE) const
 Computes the closest distance from given point to this shape. More...
 
virtual void Safety_v (const Double_t *points, const Bool_t *inside, Double_t *safe, Int_t vecsize) const
 Compute safe distance from each of the points in the input array. More...
 
virtual void SavePrimitive (std::ostream &out, Option_t *option="")
 Save a primitive as a C++ statement(s) on output stream "out". More...
 
virtual void SetDimensions (Double_t *param)
 Set all arb8 params in one step. More...
 
- Public Member Functions inherited from TGeoArb8
 TGeoArb8 ()
 Default constructor. More...
 
 TGeoArb8 (Double_t dz, Double_t *vertices=0)
 Constructor. More...
 
 TGeoArb8 (const char *name, Double_t dz, Double_t *vertices=0)
 Named constructor. More...
 
virtual ~TGeoArb8 ()
 Destructor. More...
 
virtual Double_t Capacity () const
 Computes capacity of the shape in [length^3]. More...
 
virtual void ComputeBBox ()
 Computes bounding box for an Arb8 shape. More...
 
virtual void ComputeNormal (const Double_t *point, const Double_t *dir, Double_t *norm)
 Compute normal to closest surface from POINT. More...
 
virtual void ComputeNormal_v (const Double_t *points, const Double_t *dirs, Double_t *norms, Int_t vecsize)
 Compute the normal for an array o points so that norm.dot.dir is positive Input: Arrays of point coordinates and directions + vector size Output: Array of normal directions. More...
 
void ComputeTwist ()
 Computes tangents of twist angles (angles between projections on XY plane of corresponding -dz +dz edges). More...
 
virtual Bool_t Contains (const Double_t *point) const
 Test if point is inside this shape. More...
 
virtual void Contains_v (const Double_t *points, Bool_t *inside, Int_t vecsize) const
 Check the inside status for each of the points in the array. More...
 
Double_t DistToPlane (const Double_t *point, const Double_t *dir, Int_t ipl, Bool_t in) const
 Computes distance to plane ipl : More...
 
virtual Double_t GetAxisRange (Int_t iaxis, Double_t &xlo, Double_t &xhi) const
 Get shape range on a given axis. More...
 
virtual void GetBoundingCylinder (Double_t *param) const
 Fill vector param[4] with the bounding cylinder parameters. More...
 
virtual Int_t GetByteCount () const
 
Double_t GetClosestEdge (const Double_t *point, Double_t *vert, Int_t &isegment) const
 Get index of the edge of the quadrilater represented by vert closest to point. More...
 
Double_t GetDz () const
 
virtual Int_t GetFittingBox (const TGeoBBox *parambox, TGeoMatrix *mat, Double_t &dx, Double_t &dy, Double_t &dz) const
 Fills real parameters of a positioned box inside this arb8. Returns 0 if successful. More...
 
virtual Bool_t GetPointsOnFacet (Int_t, Int_t, Double_t *) const
 Fills array with n random points located on the surface of indexed facet. More...
 
Double_t GetTwist (Int_t iseg) const
 Get twist for segment I in range [0,3]. More...
 
Double_tGetVertices ()
 
virtual void InspectShape () const
 Prints shape parameters. More...
 
virtual Bool_t IsCylType () const
 
Bool_t IsTwisted () const
 
Double_t SafetyToFace (const Double_t *point, Int_t iseg, Bool_t in) const
 Estimate safety to lateral plane defined by segment iseg in range [0,3] Might be negative: plane seen only from inside. More...
 
void SetDz (Double_t dz)
 
void SetPlaneVertices (Double_t zpl, Double_t *vertices) const
 Computes intersection points between plane at zpl and non-horizontal edges. More...
 
virtual void SetPoints (Double_t *points) const
 Creates arb8 mesh points. More...
 
virtual void SetPoints (Float_t *points) const
 Creates arb8 mesh points. More...
 
virtual void SetVertex (Int_t vnum, Double_t x, Double_t y)
 Set values for a given vertex. More...
 
virtual void Sizeof3D () const
 Fill size of this 3-D object. More...
 
- Public Member Functions inherited from TGeoBBox
 TGeoBBox ()
 Default constructor. More...
 
 TGeoBBox (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=0)
 Constructor where half-lengths are provided. More...
 
 TGeoBBox (const char *name, Double_t dx, Double_t dy, Double_t dz, Double_t *origin=0)
 Constructor with shape name. More...
 
 TGeoBBox (Double_t *param)
 Constructor based on the array of parameters. More...
 
virtual ~TGeoBBox ()
 Destructor. More...
 
virtual Bool_t CouldBeCrossed (const Double_t *point, const Double_t *dir) const
 Decides fast if the bounding box could be crossed by a vector. More...
 
virtual Int_t DistancetoPrimitive (Int_t px, Int_t py)
 Compute closest distance from point px,py to each corner. More...
 
virtual const char * GetAxisName (Int_t iaxis) const
 Returns name of axis IAXIS. More...
 
virtual const TBuffer3DGetBuffer3D (Int_t reqSections, Bool_t localFrame) const
 Fills a static 3D buffer and returns a reference. More...
 
virtual Double_t GetDX () const
 
virtual Double_t GetDY () const
 
virtual Double_t GetDZ () const
 
virtual Double_t GetFacetArea (Int_t index=0) const
 Get area in internal units of the facet with a given index. More...
 
virtual void GetMeshNumbers (Int_t &nvert, Int_t &nsegs, Int_t &npols) const
 Returns numbers of vertices, segments and polygons composing the shape mesh. More...
 
virtual Int_t GetNmeshVertices () const
 
virtual const Double_tGetOrigin () const
 
virtual Bool_t GetPointsOnSegments (Int_t npoints, Double_t *array) const
 Fills array with n random points located on the line segments of the shape mesh. More...
 
virtual Bool_t IsNullBox () const
 
virtual Bool_t IsValidBox () const
 
virtual TBuffer3DMakeBuffer3D () const
 Creates a TBuffer3D describing this shape. More...
 
void SetBoxDimensions (Double_t dx, Double_t dy, Double_t dz, Double_t *origin=0)
 Set parameters of the box. More...
 
void SetBoxPoints (Double_t *points) const
 Fill box vertices to an array. More...
 
virtual void SetSegsAndPols (TBuffer3D &buffer) const
 Fills TBuffer3D structure for segments and polygons. More...
 
- Public Member Functions inherited from TGeoShape
 TGeoShape ()
 Default constructor. More...
 
 TGeoShape (const char *name)
 Default constructor. More...
 
virtual ~TGeoShape ()
 Destructor. More...
 
virtual void AfterStreamer ()
 
void CheckShape (Int_t testNo, Int_t nsamples=10000, Option_t *option="")
 Test for shape navigation methods. More...
 
virtual void ClearThreadData () const
 
virtual void CreateThreadData (Int_t)
 
virtual void Draw (Option_t *option="")
 Draw this shape. More...
 
virtual void ExecuteEvent (Int_t event, Int_t px, Int_t py)
 Execute mouse actions on this shape. More...
 
Int_t GetId () const
 
virtual const char * GetName () const
 Get the shape name. More...
 
const char * GetPointerName () const
 Provide a pointer name containing uid. More...
 
void InvertShapeBit (UInt_t f)
 
virtual Bool_t IsAssembly () const
 
virtual Bool_t IsComposite () const
 
virtual Bool_t IsReflected () const
 
Bool_t IsRunTimeShape () const
 
Bool_t IsValid () const
 
virtual Bool_t IsVecGeom () const
 
virtual void Paint (Option_t *option="")
 Paint this shape. More...
 
void ResetShapeBit (UInt_t f)
 
void SetId (Int_t id)
 
void SetRuntime (Bool_t flag=kTRUE)
 
void SetShapeBit (UInt_t f, Bool_t set)
 Equivalent of TObject::SetBit. More...
 
void SetShapeBit (UInt_t f)
 
Int_t ShapeDistancetoPrimitive (Int_t numpoints, Int_t px, Int_t py) const
 Returns distance to shape primitive mesh. More...
 
Bool_t TestShapeBit (UInt_t f) const
 
Int_t TestShapeBits (UInt_t f) const
 
- Public Member Functions inherited from TNamed
 TNamed ()
 
 TNamed (const char *name, const char *title)
 
 TNamed (const TString &name, const TString &title)
 
 TNamed (const TNamed &named)
 TNamed copy ctor. More...
 
virtual ~TNamed ()
 TNamed destructor. More...
 
virtual void Clear (Option_t *option="")
 Set name and title to empty strings (""). More...
 
virtual TObjectClone (const char *newname="") const
 Make a clone of an object using the Streamer facility. More...
 
virtual Int_t Compare (const TObject *obj) const
 Compare two TNamed objects. More...
 
virtual void Copy (TObject &named) const
 Copy this to obj. More...
 
virtual void FillBuffer (char *&buffer)
 Encode TNamed into output buffer. More...
 
virtual const char * GetTitle () const
 Returns title of object. More...
 
virtual ULong_t Hash () const
 Return hash value for this object. More...
 
virtual Bool_t IsSortable () const
 
virtual void ls (Option_t *option="") const
 List TNamed name and title. More...
 
TNamedoperator= (const TNamed &rhs)
 TNamed assignment operator. More...
 
virtual void Print (Option_t *option="") const
 Print TNamed name and title. More...
 
virtual void SetName (const char *name)
 Set the name of the TNamed. More...
 
virtual void SetNameTitle (const char *name, const char *title)
 Set all the TNamed parameters (name and title). More...
 
virtual void SetTitle (const char *title="")
 Set the title of the TNamed. More...
 
virtual Int_t Sizeof () const
 Return size of the TNamed part of the TObject. More...
 
- Public Member Functions inherited from TObject
 TObject ()
 TObject constructor. More...
 
 TObject (const TObject &object)
 TObject copy ctor. More...
 
virtual ~TObject ()
 TObject destructor. More...
 
void AbstractMethod (const char *method) const
 Use this method to implement an "abstract" method that you don't want to leave purely abstract. More...
 
virtual void AppendPad (Option_t *option="")
 Append graphics object to current pad. More...
 
virtual void Browse (TBrowser *b)
 Browse object. May be overridden for another default action. More...
 
ULong_t CheckedHash ()
 Checked and record whether for this class has a consistent Hash/RecursiveRemove setup (*) and then return the regular Hash value for this object. More...
 
virtual const char * ClassName () const
 Returns name of class to which the object belongs. More...
 
virtual void Delete (Option_t *option="")
 Delete this object. More...
 
virtual void DrawClass () const
 Draw class inheritance tree of the class to which this object belongs. More...
 
virtual TObjectDrawClone (Option_t *option="") const
 Draw a clone of this object in the current selected pad for instance with: gROOT->SetSelectedPad(gPad). More...
 
virtual void Dump () const
 Dump contents of object on stdout. More...
 
virtual void Error (const char *method, const char *msgfmt,...) const
 Issue error message. More...
 
virtual void Execute (const char *method, const char *params, Int_t *error=0)
 Execute method on this object with the given parameter string, e.g. More...
 
virtual void Execute (TMethod *method, TObjArray *params, Int_t *error=0)
 Execute method on this object with parameters stored in the TObjArray. More...
 
virtual void Fatal (const char *method, const char *msgfmt,...) const
 Issue fatal error message. More...
 
virtual TObjectFindObject (const char *name) const
 Must be redefined in derived classes. More...
 
virtual TObjectFindObject (const TObject *obj) const
 Must be redefined in derived classes. More...
 
virtual Option_tGetDrawOption () const
 Get option used by the graphics system to draw this object. More...
 
virtual const char * GetIconName () const
 Returns mime type name of object. More...
 
virtual char * GetObjectInfo (Int_t px, Int_t py) const
 Returns string containing info about the object at position (px,py). More...
 
virtual Option_tGetOption () const
 
virtual UInt_t GetUniqueID () const
 Return the unique object id. More...
 
virtual Bool_t HandleTimer (TTimer *timer)
 Execute action in response of a timer timing out. More...
 
Bool_t HasInconsistentHash () const
 Return true is the type of this object is known to have an inconsistent setup for Hash and RecursiveRemove (i.e. More...
 
virtual void Info (const char *method, const char *msgfmt,...) const
 Issue info message. More...
 
virtual Bool_t InheritsFrom (const char *classname) const
 Returns kTRUE if object inherits from class "classname". More...
 
virtual Bool_t InheritsFrom (const TClass *cl) const
 Returns kTRUE if object inherits from TClass cl. More...
 
virtual void Inspect () const
 Dump contents of this object in a graphics canvas. More...
 
void InvertBit (UInt_t f)
 
virtual Bool_t IsEqual (const TObject *obj) const
 Default equal comparison (objects are equal if they have the same address in memory). More...
 
virtual Bool_t IsFolder () const
 Returns kTRUE in case object contains browsable objects (like containers or lists of other objects). More...
 
R__ALWAYS_INLINE Bool_t IsOnHeap () const
 
R__ALWAYS_INLINE Bool_t IsZombie () const
 
void MayNotUse (const char *method) const
 Use this method to signal that a method (defined in a base class) may not be called in a derived class (in principle against good design since a child class should not provide less functionality than its parent, however, sometimes it is necessary). More...
 
virtual Bool_t Notify ()
 This method must be overridden to handle object notification. More...
 
void Obsolete (const char *method, const char *asOfVers, const char *removedFromVers) const
 Use this method to declare a method obsolete. More...
 
void operator delete (void *ptr)
 Operator delete. More...
 
void operator delete[] (void *ptr)
 Operator delete []. More...
 
voidoperator new (size_t sz)
 
voidoperator new (size_t sz, void *vp)
 
voidoperator new[] (size_t sz)
 
voidoperator new[] (size_t sz, void *vp)
 
TObjectoperator= (const TObject &rhs)
 TObject assignment operator. More...
 
virtual void Pop ()
 Pop on object drawn in a pad to the top of the display list. More...
 
virtual Int_t Read (const char *name)
 Read contents of object with specified name from the current directory. More...
 
virtual void RecursiveRemove (TObject *obj)
 Recursively remove this object from a list. More...
 
void ResetBit (UInt_t f)
 
virtual void SaveAs (const char *filename="", Option_t *option="") const
 Save this object in the file specified by filename. More...
 
void SetBit (UInt_t f, Bool_t set)
 Set or unset the user status bits as specified in f. More...
 
void SetBit (UInt_t f)
 
virtual void SetDrawOption (Option_t *option="")
 Set drawing option for object. More...
 
virtual void SetUniqueID (UInt_t uid)
 Set the unique object id. More...
 
virtual void SysError (const char *method, const char *msgfmt,...) const
 Issue system error message. More...
 
R__ALWAYS_INLINE Bool_t TestBit (UInt_t f) const
 
Int_t TestBits (UInt_t f) const
 
virtual void UseCurrentStyle ()
 Set current style settings in this object This function is called when either TCanvas::UseCurrentStyle or TROOT::ForceStyle have been invoked. More...
 
virtual void Warning (const char *method, const char *msgfmt,...) const
 Issue warning message. More...
 
virtual Int_t Write (const char *name=0, Int_t option=0, Int_t bufsize=0)
 Write this object to the current directory. More...
 
virtual Int_t Write (const char *name=0, Int_t option=0, Int_t bufsize=0) const
 Write this object to the current directory. More...
 

Protected Attributes

Double_t fAlpha1
 
Double_t fAlpha2
 
Double_t fBl1
 
Double_t fBl2
 
Double_t fH1
 
Double_t fH2
 
Double_t fPhi
 
Double_t fTheta
 
Double_t fTl1
 
Double_t fTl2
 
- Protected Attributes inherited from TGeoArb8
Double_t fDz
 
Double_tfTwist
 
Double_t fXY [8][2]
 [4] tangents of twist angles More...
 
- Protected Attributes inherited from TGeoBBox
Double_t fDX
 
Double_t fDY
 
Double_t fDZ
 
Double_t fOrigin [3]
 
- Protected Attributes inherited from TGeoShape
UInt_t fShapeBits
 
Int_t fShapeId
 
- Protected Attributes inherited from TNamed
TString fName
 
TString fTitle
 

Additional Inherited Members

- Public Types inherited from TGeoShape
enum  EShapeType {
  kBitMask32 = 0xffffffff, kGeoNoShape = 0, kGeoBad = BIT(0), kGeoRSeg = BIT(1),
  kGeoPhiSeg = BIT(2), kGeoThetaSeg = BIT(3), kGeoVisX = BIT(4), kGeoVisY = BIT(5),
  kGeoVisZ = BIT(6), kGeoRunTimeShape = BIT(7), kGeoInvalidShape = BIT(8), kGeoTorus = BIT(9),
  kGeoBox = BIT(10), kGeoPara = BIT(11), kGeoSph = BIT(12), kGeoTube = BIT(13),
  kGeoTubeSeg = BIT(14), kGeoCone = BIT(15), kGeoConeSeg = BIT(16), kGeoPcon = BIT(17),
  kGeoPgon = BIT(18), kGeoArb8 = BIT(19), kGeoEltu = BIT(20), kGeoTrap = BIT(21),
  kGeoCtub = BIT(22), kGeoTrd1 = BIT(23), kGeoTrd2 = BIT(24), kGeoComb = BIT(25),
  kGeoClosedShape = BIT(26), kGeoXtru = BIT(27), kGeoParaboloid = BIT(28), kGeoHalfSpace = BIT(29),
  kGeoHype = BIT(30), kGeoSavePrimitive = BIT(20)
}
 
- Public Types inherited from TObject
enum  {
  kIsOnHeap = 0x01000000, kNotDeleted = 0x02000000, kZombie = 0x04000000, kInconsistent = 0x08000000,
  kBitMask = 0x00ffffff
}
 
enum  { kSingleKey = BIT(0), kOverwrite = BIT(1), kWriteDelete = BIT(2) }
 
enum  EDeprecatedStatusBits { kObjInCanvas = BIT(3) }
 
enum  EStatusBits {
  kCanDelete = BIT(0), kMustCleanup = BIT(3), kIsReferenced = BIT(4), kHasUUID = BIT(5),
  kCannotPick = BIT(6), kNoContextMenu = BIT(8), kInvalidObject = BIT(13)
}
 
- Static Public Member Functions inherited from TGeoArb8
static void GetPlaneNormal (Double_t *p1, Double_t *p2, Double_t *p3, Double_t *norm)
 Computes normal to plane defined by P1, P2 and P3. More...
 
static Bool_t InsidePolygon (Double_t x, Double_t y, Double_t *pts)
 Finds if a point in XY plane is inside the polygon defines by PTS. More...
 
static Bool_t IsSamePoint (const Double_t *p1, const Double_t *p2)
 
- Static Public Member Functions inherited from TGeoBBox
static Bool_t AreOverlapping (const TGeoBBox *box1, const TGeoMatrix *mat1, const TGeoBBox *box2, const TGeoMatrix *mat2)
 Check if 2 positioned boxes overlap. More...
 
static Bool_t Contains (const Double_t *point, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin)
 Static method to check if point[3] is located inside a box of having dx, dy, dz as half-lengths. More...
 
static Double_t DistFromInside (const Double_t *point, const Double_t *dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big())
 Compute distance from inside point to surface of the box. More...
 
static Double_t DistFromOutside (const Double_t *point, const Double_t *dir, Double_t dx, Double_t dy, Double_t dz, const Double_t *origin, Double_t stepmax=TGeoShape::Big())
 Compute distance from outside point to surface of the box. More...
 
- Static Public Member Functions inherited from TGeoShape
static Double_t Big ()
 
static Double_t ComputeEpsMch ()
 Compute machine round-off double precision error as the smallest number that if added to 1.0 is different than 1.0. More...
 
static Double_t DistToPhiMin (const Double_t *point, const Double_t *dir, Double_t s1, Double_t c1, Double_t s2, Double_t c2, Double_t sm, Double_t cm, Bool_t in=kTRUE)
 compute distance from point (inside phi) to both phi planes. Return minimum. More...
 
static Double_t EpsMch ()
 static function returning the machine round-off error More...
 
static TGeoMatrixGetTransform ()
 Returns current transformation matrix that applies to shape. More...
 
static Bool_t IsCloseToPhi (Double_t epsil, const Double_t *point, Double_t c1, Double_t s1, Double_t c2, Double_t s2)
 True if point is closer than epsil to one of the phi planes defined by c1,s1 or c2,s2. More...
 
static Bool_t IsCrossingSemiplane (const Double_t *point, const Double_t *dir, Double_t cphi, Double_t sphi, Double_t &snext, Double_t &rxy)
 Compute distance from POINT to semiplane defined by PHI angle along DIR. More...
 
static Bool_t IsInPhiRange (const Double_t *point, Double_t phi1, Double_t phi2)
 Static method to check if a point is in the phi range (phi1, phi2) [degrees]. More...
 
static Bool_t IsSameWithinTolerance (Double_t a, Double_t b)
 Check if two numbers differ with less than a tolerance. More...
 
static Bool_t IsSegCrossing (Double_t x1, Double_t y1, Double_t x2, Double_t y2, Double_t x3, Double_t y3, Double_t x4, Double_t y4)
 Check if segments (A,B) and (C,D) are crossing, where: A(x1,y1), B(x2,y2), C(x3,y3), D(x4,y4) More...
 
static void NormalPhi (const Double_t *point, const Double_t *dir, Double_t *norm, Double_t c1, Double_t s1, Double_t c2, Double_t s2)
 Static method to compute normal to phi planes. More...
 
static Double_t SafetyPhi (const Double_t *point, Bool_t in, Double_t phi1, Double_t phi2)
 Static method to compute safety w.r.t a phi corner defined by cosines/sines of the angles phi1, phi2. More...
 
static Double_t SafetySeg (Double_t r, Double_t z, Double_t r1, Double_t z1, Double_t r2, Double_t z2, Bool_t outer)
 Compute distance from point of coordinates (r,z) to segment (r1,z1):(r2,z2) More...
 
static void SetTransform (TGeoMatrix *matrix)
 Set current transformation matrix that applies to shape. More...
 
static Double_t Tolerance ()
 
- Static Public Member Functions inherited from TObject
static Long_t GetDtorOnly ()
 Return destructor only flag. More...
 
static Bool_t GetObjectStat ()
 Get status of object stat flag. More...
 
static void SetDtorOnly (void *obj)
 Set destructor only flag. More...
 
static void SetObjectStat (Bool_t stat)
 Turn on/off tracking of objects in the TObjectTable. More...
 
- Protected Types inherited from TGeoArb8
enum  EGeoArb8Type { kArb8Trap = BIT(27), kArb8Tra = BIT(28) }
 
- Protected Member Functions inherited from TGeoArb8
 TGeoArb8 (const TGeoArb8 &)
 Copy constructor. More...
 
TGeoArb8operator= (const TGeoArb8 &)
 Assignment operator. More...
 
- Protected Member Functions inherited from TGeoBBox
virtual void FillBuffer3D (TBuffer3D &buffer, Int_t reqSections, Bool_t localFrame) const
 Fills the supplied buffer, with sections in desired frame See TBuffer3D.h for explanation of sections, frame etc. More...
 
- Protected Member Functions inherited from TGeoShape
Int_t GetBasicColor () const
 Get the basic color (0-7). More...
 
void SetOnBoundary (Bool_t)
 
void TransformPoints (Double_t *points, UInt_t NbPoints) const
 Tranform a set of points (LocalToMaster) More...
 
- Protected Member Functions inherited from TObject
virtual void DoError (int level, const char *location, const char *fmt, va_list va) const
 Interface to ErrorHandler (protected). More...
 
void MakeZombie ()
 

#include <TGeoArb8.h>

Inheritance diagram for TGeoTrap:
[legend]

Constructor & Destructor Documentation

◆ TGeoTrap() [1/4]

TGeoTrap::TGeoTrap ( )

Default ctor.

Definition at line 1334 of file TGeoArb8.cxx.

◆ TGeoTrap() [2/4]

TGeoTrap::TGeoTrap ( Double_t  dz,
Double_t  theta,
Double_t  phi 
)

Constructor providing just a range in Z, theta and phi.

Definition at line 1345 of file TGeoArb8.cxx.

◆ TGeoTrap() [3/4]

TGeoTrap::TGeoTrap ( Double_t  dz,
Double_t  theta,
Double_t  phi,
Double_t  h1,
Double_t  bl1,
Double_t  tl1,
Double_t  alpha1,
Double_t  h2,
Double_t  bl2,
Double_t  tl2,
Double_t  alpha2 
)

Normal constructor.

Definition at line 1357 of file TGeoArb8.cxx.

◆ TGeoTrap() [4/4]

TGeoTrap::TGeoTrap ( const char *  name,
Double_t  dz,
Double_t  theta,
Double_t  phi,
Double_t  h1,
Double_t  bl1,
Double_t  tl1,
Double_t  alpha1,
Double_t  h2,
Double_t  bl2,
Double_t  tl2,
Double_t  alpha2 
)

Constructor with name.

Definition at line 1396 of file TGeoArb8.cxx.

◆ ~TGeoTrap()

TGeoTrap::~TGeoTrap ( )
virtual

Destructor.

Definition at line 1440 of file TGeoArb8.cxx.

Member Function Documentation

◆ DistFromInside()

Double_t TGeoTrap::DistFromInside ( const Double_t point,
const Double_t dir,
Int_t  iact = 1,
Double_t  step = TGeoShape::Big(),
Double_t safe = 0 
) const
virtual

Compute distance from inside point to surface of the trapezoid.

Reimplemented from TGeoArb8.

Reimplemented in TGeoGtra.

Definition at line 1447 of file TGeoArb8.cxx.

◆ DistFromInside_v()

void TGeoTrap::DistFromInside_v ( const Double_t points,
const Double_t dirs,
Double_t dists,
Int_t  vecsize,
Double_t step 
) const
virtual

Compute distance from array of input points having directions specified by dirs. Store output in dists.

Reimplemented from TGeoArb8.

Reimplemented in TGeoGtra.

Definition at line 1830 of file TGeoArb8.cxx.

◆ DistFromOutside()

Double_t TGeoTrap::DistFromOutside ( const Double_t point,
const Double_t dir,
Int_t  iact = 1,
Double_t  step = TGeoShape::Big(),
Double_t safe = 0 
) const
virtual

Compute distance from outside point to surface of the trapezoid.

Reimplemented from TGeoArb8.

Reimplemented in TGeoGtra.

Definition at line 1500 of file TGeoArb8.cxx.

◆ DistFromOutside_v()

void TGeoTrap::DistFromOutside_v ( const Double_t points,
const Double_t dirs,
Double_t dists,
Int_t  vecsize,
Double_t step 
) const
virtual

Compute distance from array of input points having directions specified by dirs. Store output in dists.

Reimplemented from TGeoArb8.

Reimplemented in TGeoGtra.

Definition at line 1838 of file TGeoArb8.cxx.

◆ Divide()

TGeoVolume * TGeoTrap::Divide ( TGeoVolume voldiv,
const char *  divname,
Int_t  iaxis,
Int_t  ndiv,
Double_t  start,
Double_t  step 
)
virtual

Divide this trapezoid shape belonging to volume "voldiv" into ndiv volumes called divname, from start position with the given step.

Only Z divisions are supported. For Z divisions just return the pointer to the volume to be divided. In case a wrong division axis is supplied, returns pointer to volume that was divided.

Reimplemented from TGeoArb8.

Definition at line 1619 of file TGeoArb8.cxx.

◆ GetAlpha1()

Double_t TGeoTrap::GetAlpha1 ( ) const
inline

Definition at line 129 of file TGeoArb8.h.

◆ GetAlpha2()

Double_t TGeoTrap::GetAlpha2 ( ) const
inline

Definition at line 133 of file TGeoArb8.h.

◆ GetBl1()

Double_t TGeoTrap::GetBl1 ( ) const
inline

Definition at line 127 of file TGeoArb8.h.

◆ GetBl2()

Double_t TGeoTrap::GetBl2 ( ) const
inline

Definition at line 131 of file TGeoArb8.h.

◆ GetH1()

Double_t TGeoTrap::GetH1 ( ) const
inline

Definition at line 126 of file TGeoArb8.h.

◆ GetH2()

Double_t TGeoTrap::GetH2 ( ) const
inline

Definition at line 130 of file TGeoArb8.h.

◆ GetMakeRuntimeShape()

TGeoShape * TGeoTrap::GetMakeRuntimeShape ( TGeoShape mother,
TGeoMatrix mat 
) const
virtual

In case shape has some negative parameters, these have to be computed in order to fit the mother.

Reimplemented from TGeoArb8.

Reimplemented in TGeoGtra.

Definition at line 1667 of file TGeoArb8.cxx.

◆ GetPhi()

Double_t TGeoTrap::GetPhi ( ) const
inline

Definition at line 125 of file TGeoArb8.h.

◆ GetTheta()

Double_t TGeoTrap::GetTheta ( ) const
inline

Definition at line 124 of file TGeoArb8.h.

◆ GetTl1()

Double_t TGeoTrap::GetTl1 ( ) const
inline

Definition at line 128 of file TGeoArb8.h.

◆ GetTl2()

Double_t TGeoTrap::GetTl2 ( ) const
inline

Definition at line 132 of file TGeoArb8.h.

◆ Safety()

Double_t TGeoTrap::Safety ( const Double_t point,
Bool_t  in = kTRUE 
) const
virtual

Computes the closest distance from given point to this shape.

Reimplemented from TGeoArb8.

Reimplemented in TGeoGtra.

Definition at line 1702 of file TGeoArb8.cxx.

◆ Safety_v()

void TGeoTrap::Safety_v ( const Double_t points,
const Bool_t inside,
Double_t safe,
Int_t  vecsize 
) const
virtual

Compute safe distance from each of the points in the input array.

Input: Array of point coordinates, array of statuses for these points, size of the arrays Output: Safety values

Reimplemented from TGeoArb8.

Reimplemented in TGeoGtra.

Definition at line 1848 of file TGeoArb8.cxx.

◆ SavePrimitive()

void TGeoTrap::SavePrimitive ( std::ostream &  out,
Option_t option = "" 
)
virtual

Save a primitive as a C++ statement(s) on output stream "out".

Reimplemented from TGeoArb8.

Reimplemented in TGeoGtra.

Definition at line 1761 of file TGeoArb8.cxx.

◆ SetDimensions()

void TGeoTrap::SetDimensions ( Double_t param)
virtual

Set all arb8 params in one step.

  • param[0] = dz
  • param[1] = theta
  • param[2] = phi
  • param[3] = h1
  • param[4] = bl1
  • param[5] = tl1
  • param[6] = alpha1
  • param[7] = h2
  • param[8] = bl2
  • param[9] = tl2
  • param[10] = alpha2

Reimplemented from TGeoArb8.

Reimplemented in TGeoGtra.

Definition at line 1794 of file TGeoArb8.cxx.

Member Data Documentation

◆ fAlpha1

Double_t TGeoTrap::fAlpha1
protected

Definition at line 98 of file TGeoArb8.h.

◆ fAlpha2

Double_t TGeoTrap::fAlpha2
protected

Definition at line 102 of file TGeoArb8.h.

◆ fBl1

Double_t TGeoTrap::fBl1
protected

Definition at line 96 of file TGeoArb8.h.

◆ fBl2

Double_t TGeoTrap::fBl2
protected

Definition at line 100 of file TGeoArb8.h.

◆ fH1

Double_t TGeoTrap::fH1
protected

Definition at line 95 of file TGeoArb8.h.

◆ fH2

Double_t TGeoTrap::fH2
protected

Definition at line 99 of file TGeoArb8.h.

◆ fPhi

Double_t TGeoTrap::fPhi
protected

Definition at line 94 of file TGeoArb8.h.

◆ fTheta

Double_t TGeoTrap::fTheta
protected

Definition at line 93 of file TGeoArb8.h.

◆ fTl1

Double_t TGeoTrap::fTl1
protected

Definition at line 97 of file TGeoArb8.h.

◆ fTl2

Double_t TGeoTrap::fTl2
protected

Definition at line 101 of file TGeoArb8.h.

Libraries for TGeoTrap:
[legend]

The documentation for this class was generated from the following files: