StandardHypoTestInvDemo.C File Reference

Detailed Description

Standard tutorial macro for performing an inverted hypothesis test for computing an interval

This macro will perform a scan of the p-values for computing the interval or limit

Usage:

root>.L StandardHypoTestInvDemo.C
root> StandardHypoTestInvDemo("fileName","workspace name","S+B modelconfig name","B model name","data set
name",calculator type, test statistic type, use CLS,
                               number of points, xmin, xmax, number of toys, use number counting)
 
type = 0 Freq calculator
type = 1 Hybrid calculator
type = 2 Asymptotic calculator
type = 3 Asymptotic calculator using nominal Asimov data sets (not using fitted parameter values but nominal ones)
 
testStatType = 0 LEP
             = 1 Tevatron
             = 2 Profile Likelihood two sided
             = 3 Profile Likelihood one sided (i.e. = 0 if mu < mu_hat)
             = 4 Profile Likelihood signed ( pll = -pll if mu < mu_hat)
             = 5 Max Likelihood Estimate as test statistic
             = 6 Number of observed event as test statistic

0x555d49169970 results/example_combined_GaussExample_model.root
Running HypoTestInverter on the workspace combined
 
RooWorkspace(combined) combined contents
 
variables
---------
(Lumi,SigXsecOverSM,alpha_syst1,alpha_syst2,alpha_syst3,channelCat,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1,nominalLumi,obs_x_channel1)
 
p.d.f.s
-------
RooGaussian::alpha_syst1Constraint[ x=alpha_syst1 mean=nom_alpha_syst1 sigma=1 ] = 1
RooGaussian::alpha_syst2Constraint[ x=alpha_syst2 mean=nom_alpha_syst2 sigma=1 ] = 1
RooGaussian::alpha_syst3Constraint[ x=alpha_syst3 mean=nom_alpha_syst3 sigma=1 ] = 1
RooRealSumPdf::channel1_model[ signal_channel1_scaleFactors * signal_channel1_shapes + background1_channel1_scaleFactors * background1_channel1_shapes + background2_channel1_scaleFactors * background2_channel1_shapes ] = 240
RooPoisson::gamma_stat_channel1_bin_0_constraint[ x=nom_gamma_stat_channel1_bin_0 mean=gamma_stat_channel1_bin_0_poisMean ] = 0.019943
RooPoisson::gamma_stat_channel1_bin_1_constraint[ x=nom_gamma_stat_channel1_bin_1 mean=gamma_stat_channel1_bin_1_poisMean ] = 0.039861
RooGaussian::lumiConstraint[ x=Lumi mean=nominalLumi sigma=0.1 ] = 1
RooProdPdf::model_channel1[ lumiConstraint * alpha_syst1Constraint * alpha_syst2Constraint * alpha_syst3Constraint * gamma_stat_channel1_bin_0_constraint * gamma_stat_channel1_bin_1_constraint * channel1_model(obs_x_channel1) ] = 0.190787
RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.190787
 
functions
--------
RooHistFunc::background1_channel1_Hist_alphanominal[ depList=(obs_x_channel1) depList=(obs_x_channel1) ] = 100
RooStats::HistFactory::FlexibleInterpVar::background1_channel1_epsilon[ paramList=(alpha_syst2) ] = 1
RooProduct::background1_channel1_scaleFactors[ background1_channel1_epsilon * Lumi ] = 1
RooProduct::background1_channel1_shapes[ background1_channel1_Hist_alphanominal * mc_stat_channel1 * channel1_model_binWidth ] = 200
RooHistFunc::background2_channel1_Hist_alphanominal[ depList=(obs_x_channel1) depList=(obs_x_channel1) ] = 0
RooStats::HistFactory::FlexibleInterpVar::background2_channel1_epsilon[ paramList=(alpha_syst3) ] = 1
RooProduct::background2_channel1_scaleFactors[ background2_channel1_epsilon * Lumi ] = 1
RooProduct::background2_channel1_shapes[ background2_channel1_Hist_alphanominal * mc_stat_channel1 * channel1_model_binWidth ] = 0
RooBinWidthFunction::channel1_model_binWidth[ HistFuncForBinWidth=signal_channel1_Hist_alphanominal HistFuncForBinWidth=signal_channel1_Hist_alphanominal ] = 2
RooProduct::gamma_stat_channel1_bin_0_poisMean[ gamma_stat_channel1_bin_0 * gamma_stat_channel1_bin_0_tau ] = 400
RooProduct::gamma_stat_channel1_bin_1_poisMean[ gamma_stat_channel1_bin_1 * gamma_stat_channel1_bin_1_tau ] = 100
ParamHistFunc::mc_stat_channel1[ ] = 1
RooHistFunc::signal_channel1_Hist_alphanominal[ depList=(obs_x_channel1) depList=(obs_x_channel1) ] = 20
RooStats::HistFactory::FlexibleInterpVar::signal_channel1_epsilon[ paramList=(alpha_syst1) ] = 1
RooProduct::signal_channel1_scaleFactors[ signal_channel1_epsilon * SigXsecOverSM * Lumi ] = 1
RooProduct::signal_channel1_shapes[ signal_channel1_Hist_alphanominal * channel1_model_binWidth ] = 40
 
datasets
--------
RooDataSet::obsData(obs_x_channel1,channelCat)
RooDataSet::asimovData(obs_x_channel1,channelCat)
 
embedded datasets (in pdfs and functions)
-----------------------------------------
RooDataHist::signal_channel1_Hist_alphanominalDHist(obs_x_channel1)
RooDataHist::background1_channel1_Hist_alphanominalDHist(obs_x_channel1)
RooDataHist::background2_channel1_Hist_alphanominalDHist(obs_x_channel1)
 
parameter snapshots
-------------------
NominalParamValues = (nominalLumi=1[C],nom_alpha_syst1=0[C],nom_alpha_syst2=0[C],nom_alpha_syst3=0[C],nom_gamma_stat_channel1_bin_0=400[C],nom_gamma_stat_channel1_bin_1=100[C],obs_x_channel1=1.25,Lumi=1 +/- 0.1[C],alpha_syst1=0 +/- 1[C],alpha_syst2=0 +/- 1,alpha_syst3=0 +/- 1,gamma_stat_channel1_bin_0=1 +/- 0.05,gamma_stat_channel1_bin_1=1 +/- 0.1,SigXsecOverSM=1 +/- 0)
 
named sets
----------
ModelConfig_GlobalObservables:(nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
ModelConfig_NuisParams:(alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
ModelConfig_Observables:(obs_x_channel1,channelCat)
ModelConfig_POI:(SigXsecOverSM)
globalObservables:(nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
observables:(obs_x_channel1,channelCat)
 
generic objects
---------------
RooStats::ModelConfig::ModelConfig
 
Using data set obsData
StandardHypoTestInvDemo : POI initial value:   SigXsecOverSM = 1
[#1] INFO:InputArguments -- HypoTestInverter ---- Input models: 
       using as S+B (null) model     : ModelConfig
       using as B (alternate) model  : ModelConfig_with_poi_0
 
Doing a fixed scan  in interval : 0 , 5
[#1] INFO:Eval -- HypoTestInverter::GetInterval - run a fixed scan
[#0] WARNING:InputArguments -- HypoTestInverter::RunFixedScan - xMax > upper bound, using xmax = 3
[#1] INFO:ObjectHandling -- RooWorkspace::saveSnapshot(combined) replacing previous snapshot with name ModelConfig__snapshot
[#0] PROGRESS:Eval -- Running for SigXsecOverSM = 0
 
=== Using the following for ModelConfig ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.158989
Snapshot:                
  1) 0x555d4a043c90 RooRealVar:: SigXsecOverSM = 0 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
 
=== Using the following for ModelConfig_with_poi_0 ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.158989
Snapshot:                
  1) 0x555d49175780 RooRealVar:: SigXsecOverSM = 0 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
[#0] PROGRESS:Generation -- Test Statistic on data: 0
[#1] INFO:InputArguments -- Profiling conditional MLEs for Null.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Null.
[#0] PROGRESS:Generation -- generated toys: 500 / 1000
[#1] INFO:InputArguments -- Profiling conditional MLEs for Alt.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Alt.
[#0] PROGRESS:Eval -- P values for  SigXsecOverSM =  0
   CLs      = 1 +/- 0
   CLb      = 1 +/- 0
   CLsplusb = 1 +/- 0
 
[#1] INFO:ObjectHandling -- RooWorkspace::saveSnapshot(combined) replacing previous snapshot with name ModelConfig__snapshot
[#0] PROGRESS:Eval -- Running for SigXsecOverSM = 0.6
 
=== Using the following for ModelConfig ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.178068
Snapshot:                
  1) 0x555d4a214910 RooRealVar:: SigXsecOverSM = 0.6 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
 
=== Using the following for ModelConfig_with_poi_0 ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.178068
Snapshot:                
  1) 0x555d4a044b50 RooRealVar:: SigXsecOverSM = 0 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
[#0] PROGRESS:Generation -- Test Statistic on data: -2.35222
[#1] INFO:InputArguments -- Profiling conditional MLEs for Null.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Null.
[#0] PROGRESS:Generation -- generated toys: 500 / 1000
[#1] INFO:InputArguments -- Profiling conditional MLEs for Alt.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Alt.
[#0] PROGRESS:Eval -- P values for  SigXsecOverSM =  0.6
   CLs      = 0.826039 +/- 0.0187037
   CLb      = 0.914 +/- 0.0125383
   CLsplusb = 0.755 +/- 0.0136006
 
[#1] INFO:ObjectHandling -- RooWorkspace::saveSnapshot(combined) replacing previous snapshot with name ModelConfig__snapshot
[#0] PROGRESS:Eval -- Running for SigXsecOverSM = 1.2
 
=== Using the following for ModelConfig ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.197147
Snapshot:                
  1) 0x555d4a377370 RooRealVar:: SigXsecOverSM = 1.2 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
 
=== Using the following for ModelConfig_with_poi_0 ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.197147
Snapshot:                
  1) 0x555d4a370b50 RooRealVar:: SigXsecOverSM = 0 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
[#0] PROGRESS:Generation -- Test Statistic on data: -2.9364
[#1] INFO:InputArguments -- Profiling conditional MLEs for Null.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Null.
[#0] PROGRESS:Generation -- generated toys: 500 / 1000
[#1] INFO:InputArguments -- Profiling conditional MLEs for Alt.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Alt.
[#0] PROGRESS:Eval -- P values for  SigXsecOverSM =  1.2
   CLs      = 0.495652 +/- 0.018325
   CLb      = 0.92 +/- 0.0121326
   CLsplusb = 0.456 +/- 0.01575
 
[#1] INFO:ObjectHandling -- RooWorkspace::saveSnapshot(combined) replacing previous snapshot with name ModelConfig__snapshot
[#0] PROGRESS:Eval -- Running for SigXsecOverSM = 1.8
 
=== Using the following for ModelConfig ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.216225
Snapshot:                
  1) 0x555d4a1f3ca0 RooRealVar:: SigXsecOverSM = 1.8 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
 
=== Using the following for ModelConfig_with_poi_0 ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.216225
Snapshot:                
  1) 0x555d4a1e4000 RooRealVar:: SigXsecOverSM = 0 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
[#0] PROGRESS:Generation -- Test Statistic on data: -2.05075
[#1] INFO:InputArguments -- Profiling conditional MLEs for Null.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Null.
[#0] PROGRESS:Generation -- generated toys: 500 / 1000
[#1] INFO:InputArguments -- Profiling conditional MLEs for Alt.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Alt.
[#0] PROGRESS:Eval -- P values for  SigXsecOverSM =  1.8
   CLs      = 0.209052 +/- 0.0137241
   CLb      = 0.928 +/- 0.0115599
   CLsplusb = 0.194 +/- 0.0125046
 
[#1] INFO:ObjectHandling -- RooWorkspace::saveSnapshot(combined) replacing previous snapshot with name ModelConfig__snapshot
[#0] PROGRESS:Eval -- Running for SigXsecOverSM = 2.4
 
=== Using the following for ModelConfig ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.235304
Snapshot:                
  1) 0x555d4a1b1c80 RooRealVar:: SigXsecOverSM = 2.4 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
 
=== Using the following for ModelConfig_with_poi_0 ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.235304
Snapshot:                
  1) 0x555d4a1fed10 RooRealVar:: SigXsecOverSM = 0 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
[#0] PROGRESS:Generation -- Test Statistic on data: 0.0783908
[#1] INFO:InputArguments -- Profiling conditional MLEs for Null.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Null.
[#0] PROGRESS:Generation -- generated toys: 500 / 1000
[#1] INFO:InputArguments -- Profiling conditional MLEs for Alt.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Alt.
[#0] PROGRESS:Eval -- P values for  SigXsecOverSM =  2.4
   CLs      = 0.0503282 +/- 0.00728062
   CLb      = 0.914 +/- 0.0125383
   CLsplusb = 0.046 +/- 0.0066245
 
[#1] INFO:ObjectHandling -- RooWorkspace::saveSnapshot(combined) replacing previous snapshot with name ModelConfig__snapshot
[#0] PROGRESS:Eval -- Running for SigXsecOverSM = 3
 
=== Using the following for ModelConfig ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.254383
Snapshot:                
  1) 0x555d4a1d07e0 RooRealVar:: SigXsecOverSM = 3 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
 
=== Using the following for ModelConfig_with_poi_0 ===
Observables:             RooArgSet:: = (obs_x_channel1,channelCat)
Parameters of Interest:  RooArgSet:: = (SigXsecOverSM)
Nuisance Parameters:     RooArgSet:: = (alpha_syst2,alpha_syst3,gamma_stat_channel1_bin_0,gamma_stat_channel1_bin_1)
Global Observables:      RooArgSet:: = (nominalLumi,nom_alpha_syst1,nom_alpha_syst2,nom_alpha_syst3,nom_gamma_stat_channel1_bin_0,nom_gamma_stat_channel1_bin_1)
PDF:                     RooSimultaneous::simPdf[ indexCat=channelCat channel1=model_channel1 ] = 0.254383
Snapshot:                
  1) 0x555d4a1fe1d0 RooRealVar:: SigXsecOverSM = 0 +/- 0  L(0 - 3)  "SigXsecOverSM"
 
[#0] PROGRESS:Generation -- Test Statistic on data: 3.27476
[#1] INFO:InputArguments -- Profiling conditional MLEs for Null.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Null.
[#0] PROGRESS:Generation -- generated toys: 500 / 1000
[#1] INFO:InputArguments -- Profiling conditional MLEs for Alt.
[#1] INFO:InputArguments -- Using a ToyMCSampler. Now configuring for Alt.
[#0] PROGRESS:Eval -- P values for  SigXsecOverSM =  3
   CLs      = 0.00534188 +/- 0.0023838
   CLb      = 0.936 +/- 0.0109457
   CLsplusb = 0.005 +/- 0.00223047
 
Time to perform limit scan 
Real time 0:00:08, CP time 8.800
The computed upper limit is: 2.40438 +/- 0.0566659
Expected upper limits, using the B (alternate) model : 
 expected limit (median) 1.61927
 expected limit (-1 sig) 1.09318
 expected limit (+1 sig) 2.24198
 expected limit (-2 sig) 0.787047
 expected limit (+2 sig) 2.86153
[#0] WARNING:Plotting -- Could not determine xmin and xmax of sampling distribution that was given to plot.
[#0] WARNING:Plotting -- Could not determine xmin and xmax of sampling distribution that was given to plot.

 
#include "TFile.h"
#include "RooWorkspace.h"
#include "RooAbsPdf.h"
#include "RooRealVar.h"
#include "RooDataSet.h"
#include "RooStats/ModelConfig.h"
#include "RooRandom.h"
#include "TGraphErrors.h"
#include "TGraphAsymmErrors.h"
#include "TCanvas.h"
#include "TLine.h"
#include "TROOT.h"
#include "TSystem.h"
 
#include "RooStats/AsymptoticCalculator.h"
#include "RooStats/HybridCalculator.h"
#include "RooStats/FrequentistCalculator.h"
#include "RooStats/ToyMCSampler.h"
#include "RooStats/HypoTestPlot.h"
 
#include "RooStats/NumEventsTestStat.h"
#include "RooStats/ProfileLikelihoodTestStat.h"
#include "RooStats/SimpleLikelihoodRatioTestStat.h"
#include "RooStats/RatioOfProfiledLikelihoodsTestStat.h"
#include "RooStats/MaxLikelihoodEstimateTestStat.h"
#include "RooStats/NumEventsTestStat.h"
 
#include "RooStats/HypoTestInverter.h"
#include "RooStats/HypoTestInverterResult.h"
#include "RooStats/HypoTestInverterPlot.h"
 
#include <cassert>
 
using namespace RooFit;
using namespace RooStats;
using std::cout, std::endl;
 
// structure defining the options
struct HypoTestInvOptions {
 
   bool plotHypoTestResult = true; // plot test statistic result at each point
   bool writeResult = true;        // write HypoTestInverterResult in a file
   TString resultFileName; // file with results (by default is built automatically using the workspace input file name)
   bool optimize = true;   // optimize evaluation of test statistic
   bool useVectorStore = true;  // convert data to use new roofit data store
   bool generateBinned = false; // generate binned data sets
   bool noSystematics = false;  // force all systematics to be off (i.e. set all nuisance parameters as constat
                                // to their nominal values)
   double nToysRatio = 2;       // ratio Ntoys S+b/ntoysB
   double maxPOI = -1;          // max value used of POI (in case of auto scan)
   bool enableDetailedOutput =
      false; // enable detailed output with all fit information for each toys (output will be written in result file)
   bool rebuild = false;       // re-do extra toys for computing expected limits and rebuild test stat
                               // distributions (N.B this requires much more CPU (factor is equivalent to nToyToRebuild)
   int nToyToRebuild = 100;    // number of toys used to rebuild
   int rebuildParamValues = 0; // = 0   do a profile of all the parameters on the B (alt snapshot) before performing a
                               // rebuild operation (default)
                               // = 1   use initial workspace parameters with B snapshot values
                               // = 2   use all initial workspace parameters with B
                               // Otherwise the rebuild will be performed using
   int initialFit = -1;        // do a first  fit to the model (-1 : default, 0 skip fit, 1 do always fit)
   int randomSeed = -1;        // random seed (if = -1: use default value, if = 0 always random )
 
   int nAsimovBins = 0; // number of bins in observables used for Asimov data sets (0 is the default and it is given by
                        // workspace, typically is 100)
 
   bool reuseAltToys = false; // reuse same toys for alternate hypothesis (if set one gets more stable bands)
   double confLevel = 0.95;   // confidence level value
 
   std::string minimizerType =
      ""; // minimizer type (default is what is in ROOT::Math::MinimizerOptions::DefaultMinimizerType()
   std::string massValue = ""; // extra string to tag output file of result
   int printLevel = 0;         // print level for debugging PL test statistics and calculators
 
   bool useNLLOffset = false; // use NLL offset when fitting (this increase stability of fits)
};
 
HypoTestInvOptions optHTInv;
 
// internal class to run the inverter and more
 
namespace RooStats {
 
class HypoTestInvTool {
 
public:
   HypoTestInvTool();
   ~HypoTestInvTool(){};
 
   HypoTestInverterResult *RunInverter(RooWorkspace *w, const char *modelSBName, const char *modelBName,
                                       const char *dataName, int type, int testStatType, bool useCLs, int npoints,
                                       double poimin, double poimax, int ntoys, bool useNumberCounting = false,
                                       const char *nuisPriorName = nullptr);
 
   void AnalyzeResult(HypoTestInverterResult *r, int calculatorType, int testStatType, bool useCLs, int npoints,
                      const char *fileNameBase = nullptr);
 
   void SetParameter(const char *name, const char *value);
   void SetParameter(const char *name, bool value);
   void SetParameter(const char *name, int value);
   void SetParameter(const char *name, double value);
 
private:
   bool mPlotHypoTestResult;
   bool mWriteResult;
   bool mOptimize;
   bool mUseVectorStore;
   bool mGenerateBinned;
   bool mRebuild;
   bool mReuseAltToys;
   bool mEnableDetOutput;
   int mNToyToRebuild;
   int mRebuildParamValues;
   int mPrintLevel;
   int mInitialFit;
   int mRandomSeed;
   double mNToysRatio;
   double mMaxPoi;
   int mAsimovBins;
   std::string mMassValue;
   std::string
      mMinimizerType; // minimizer type (default is what is in ROOT::Math::MinimizerOptions::DefaultMinimizerType()
   TString mResultFileName;
};
 
} // end namespace RooStats
 
RooStats::HypoTestInvTool::HypoTestInvTool()
   : mPlotHypoTestResult(true), mWriteResult(false), mOptimize(true), mUseVectorStore(true), mGenerateBinned(false),
     mEnableDetOutput(false), mRebuild(false), mReuseAltToys(false),
     mNToyToRebuild(100), mRebuildParamValues(0), mPrintLevel(0), mInitialFit(-1), mRandomSeed(-1), mNToysRatio(2),
     mMaxPoi(-1), mAsimovBins(0), mMassValue(""), mMinimizerType(""), mResultFileName()
{
}
 
void RooStats::HypoTestInvTool::SetParameter(const char *name, bool value)
{
   //
   // set boolean parameters
   //
 
   std::string s_name(name);
 
   if (s_name.find("PlotHypoTestResult") != std::string::npos)
      mPlotHypoTestResult = value;
   if (s_name.find("WriteResult") != std::string::npos)
      mWriteResult = value;
   if (s_name.find("Optimize") != std::string::npos)
      mOptimize = value;
   if (s_name.find("UseVectorStore") != std::string::npos)
      mUseVectorStore = value;
   if (s_name.find("GenerateBinned") != std::string::npos)
      mGenerateBinned = value;
   if (s_name.find("EnableDetailedOutput") != std::string::npos)
      mEnableDetOutput = value;
   if (s_name.find("Rebuild") != std::string::npos)
      mRebuild = value;
   if (s_name.find("ReuseAltToys") != std::string::npos)
      mReuseAltToys = value;
 
   return;
}
 
void RooStats::HypoTestInvTool::SetParameter(const char *name, int value)
{
   //
   // set integer parameters
   //
 
   std::string s_name(name);
 
   if (s_name.find("NToyToRebuild") != std::string::npos)
      mNToyToRebuild = value;
   if (s_name.find("RebuildParamValues") != std::string::npos)
      mRebuildParamValues = value;
   if (s_name.find("PrintLevel") != std::string::npos)
      mPrintLevel = value;
   if (s_name.find("InitialFit") != std::string::npos)
      mInitialFit = value;
   if (s_name.find("RandomSeed") != std::string::npos)
      mRandomSeed = value;
   if (s_name.find("AsimovBins") != std::string::npos)
      mAsimovBins = value;
 
   return;
}
 
void RooStats::HypoTestInvTool::SetParameter(const char *name, double value)
{
   //
   // set double precision parameters
   //
 
   std::string s_name(name);
 
   if (s_name.find("NToysRatio") != std::string::npos)
      mNToysRatio = value;
   if (s_name.find("MaxPOI") != std::string::npos)
      mMaxPoi = value;
 
   return;
}
 
void RooStats::HypoTestInvTool::SetParameter(const char *name, const char *value)
{
   //
   // set string parameters
   //
 
   std::string s_name(name);
 
   if (s_name.find("MassValue") != std::string::npos)
      mMassValue.assign(value);
   if (s_name.find("MinimizerType") != std::string::npos)
      mMinimizerType.assign(value);
   if (s_name.find("ResultFileName") != std::string::npos)
      mResultFileName = value;
 
   return;
}
 
void StandardHypoTestInvDemo(const char *infile = nullptr, const char *wsName = "combined",
                             const char *modelSBName = "ModelConfig", const char *modelBName = "",
                             const char *dataName = "obsData", int calculatorType = 0, int testStatType = 0,
                             bool useCLs = true, int npoints = 6, double poimin = 0, double poimax = 5,
                             int ntoys = 1000, bool useNumberCounting = false, const char *nuisPriorName = nullptr)
{
   /*
 
     Other Parameter to pass in tutorial
     apart from standard for filename, ws, modelconfig and data
 
     type = 0 Freq calculator
     type = 1 Hybrid calculator
     type = 2 Asymptotic calculator
     type = 3 Asymptotic calculator using nominal Asimov data sets (not using fitted parameter values but nominal ones)
 
     testStatType = 0 LEP
     = 1 Tevatron
     = 2 Profile Likelihood
     = 3 Profile Likelihood one sided (i.e. = 0 if mu < mu_hat)
     = 4 Profiel Likelihood signed ( pll = -pll if mu < mu_hat)
     = 5 Max Likelihood Estimate as test statistic
     = 6 Number of observed event as test statistic
 
     useCLs          scan for CLs (otherwise for CLs+b)
 
     npoints:        number of points to scan , for autoscan set npoints = -1
 
     poimin,poimax:  min/max value to scan in case of fixed scans
     (if min >  max, try to find automatically)
 
     ntoys:         number of toys to use
 
     useNumberCounting:  set to true when using number counting events
 
     nuisPriorName:   name of prior for the nuisance. This is often expressed as constraint term in the global model
     It is needed only when using the HybridCalculator (type=1)
     If not given by default the prior pdf from ModelConfig is used.
 
     extra options are available as global parameters of the macro. They major ones are:
 
     plotHypoTestResult   plot result of tests at each point (TS distributions) (default is true)
     writeResult          write result of scan (default is true)
     rebuild              rebuild scan for expected limits (require extra toys) (default is false)
     generateBinned       generate binned data sets for toys (default is false) - be careful not to activate with
     a too large (>=3) number of observables
     nToyRatio            ratio of S+B/B toys (default is 2)
 
 
   */
 
   TString filename(infile);
   if (filename.IsNull()) {
      filename = "results/example_combined_GaussExample_model.root";
      bool fileExist = !gSystem->AccessPathName(filename); // note opposite return code
      // if file does not exists generate with histfactory
      if (!fileExist) {
         // Normally this would be run on the command line
         cout << "will run standard hist2workspace example" << endl;
         gROOT->ProcessLine(".! prepareHistFactory .");
         gROOT->ProcessLine(".! hist2workspace config/example.xml");
         cout << "\n\n---------------------" << endl;
         cout << "Done creating example input" << endl;
         cout << "---------------------\n\n" << endl;
      }
 
   } else
      filename = infile;
 
   // Try to open the file
   TFile *file = TFile::Open(filename);
 
   // if input file was specified but not found, quit
   if (!file) {
      cout << "StandardRooStatsDemoMacro: Input file " << filename << " is not found" << endl;
      return;
   }
 
   HypoTestInvTool calc;
 
   // set parameters
   calc.SetParameter("PlotHypoTestResult", optHTInv.plotHypoTestResult);
   calc.SetParameter("WriteResult", optHTInv.writeResult);
   calc.SetParameter("Optimize", optHTInv.optimize);
   calc.SetParameter("UseVectorStore", optHTInv.useVectorStore);
   calc.SetParameter("GenerateBinned", optHTInv.generateBinned);
   calc.SetParameter("NToysRatio", optHTInv.nToysRatio);
   calc.SetParameter("MaxPOI", optHTInv.maxPOI);
   calc.SetParameter("EnableDetailedOutput", optHTInv.enableDetailedOutput);
   calc.SetParameter("Rebuild", optHTInv.rebuild);
   calc.SetParameter("ReuseAltToys", optHTInv.reuseAltToys);
   calc.SetParameter("NToyToRebuild", optHTInv.nToyToRebuild);
   calc.SetParameter("RebuildParamValues", optHTInv.rebuildParamValues);
   calc.SetParameter("MassValue", optHTInv.massValue.c_str());
   calc.SetParameter("MinimizerType", optHTInv.minimizerType.c_str());
   calc.SetParameter("PrintLevel", optHTInv.printLevel);
   calc.SetParameter("InitialFit", optHTInv.initialFit);
   calc.SetParameter("ResultFileName", optHTInv.resultFileName);
   calc.SetParameter("RandomSeed", optHTInv.randomSeed);
   calc.SetParameter("AsimovBins", optHTInv.nAsimovBins);
 
   // enable offset for all roostats
   if (optHTInv.useNLLOffset)
      RooStats::SetNLLOffsetMode("initial");
 
   RooWorkspace *w = dynamic_cast<RooWorkspace *>(file->Get(wsName));
   HypoTestInverterResult *r = nullptr;
   std::cout << w << "\t" << filename << std::endl;
   if (w != nullptr) {
      r = calc.RunInverter(w, modelSBName, modelBName, dataName, calculatorType, testStatType, useCLs, npoints, poimin,
                           poimax, ntoys, useNumberCounting, nuisPriorName);
      if (!r) {
         std::cerr << "Error running the HypoTestInverter - Exit " << std::endl;
         return;
      }
   } else {
      // case workspace is not present look for the inverter result
      std::cout << "Reading an HypoTestInverterResult with name " << wsName << " from file " << filename << std::endl;
      r = dynamic_cast<HypoTestInverterResult *>(file->Get(wsName)); //
      if (!r) {
         std::cerr << "File " << filename << " does not contain a workspace or an HypoTestInverterResult - Exit "
                   << std::endl;
         file->ls();
         return;
      }
   }
 
   calc.AnalyzeResult(r, calculatorType, testStatType, useCLs, npoints, infile);
 
   return;
}
 
void RooStats::HypoTestInvTool::AnalyzeResult(HypoTestInverterResult *r, int calculatorType, int testStatType,
                                              bool useCLs, int npoints, const char *fileNameBase)
{
 
   // analyze result produced by the inverter, optionally save it in a file
 
   double lowerLimit = 0;
   double llError = 0;
#if defined ROOT_SVN_VERSION && ROOT_SVN_VERSION >= 44126
   if (r->IsTwoSided()) {
      lowerLimit = r->LowerLimit();
      llError = r->LowerLimitEstimatedError();
   }
#else
   lowerLimit = r->LowerLimit();
   llError = r->LowerLimitEstimatedError();
#endif
 
   double upperLimit = r->UpperLimit();
   double ulError = r->UpperLimitEstimatedError();
 
   // std::cout << "DEBUG : [ " << lowerLimit << " , " << upperLimit << "  ] " << std::endl;
 
   if (lowerLimit < upperLimit * (1. - 1.E-4) && lowerLimit != 0)
      std::cout << "The computed lower limit is: " << lowerLimit << " +/- " << llError << std::endl;
   std::cout << "The computed upper limit is: " << upperLimit << " +/- " << ulError << std::endl;
 
   // compute expected limit
   std::cout << "Expected upper limits, using the B (alternate) model : " << std::endl;
   std::cout << " expected limit (median) " << r->GetExpectedUpperLimit(0) << std::endl;
   std::cout << " expected limit (-1 sig) " << r->GetExpectedUpperLimit(-1) << std::endl;
   std::cout << " expected limit (+1 sig) " << r->GetExpectedUpperLimit(1) << std::endl;
   std::cout << " expected limit (-2 sig) " << r->GetExpectedUpperLimit(-2) << std::endl;
   std::cout << " expected limit (+2 sig) " << r->GetExpectedUpperLimit(2) << std::endl;
 
   // detailed output
   if (mEnableDetOutput) {
      mWriteResult = true;
      Info("StandardHypoTestInvDemo", "detailed output will be written in output result file");
   }
 
   // write result in a file
   if (r != nullptr && mWriteResult) {
 
      // write to a file the results
      const char *calcType = (calculatorType == 0) ? "Freq" : (calculatorType == 1) ? "Hybr" : "Asym";
      const char *limitType = (useCLs) ? "CLs" : "Cls+b";
      const char *scanType = (npoints < 0) ? "auto" : "grid";
      if (mResultFileName.IsNull()) {
         mResultFileName = TString::Format("%s_%s_%s_ts%d_", calcType, limitType, scanType, testStatType);
         // strip the / from the filename
         if (!mMassValue.empty()) {
            mResultFileName += mMassValue.c_str();
            mResultFileName += "_";
         }
 
         TString name = fileNameBase;
         name.Replace(0, name.Last('/') + 1, "");
         mResultFileName += name;
      }
 
      // get (if existing) rebuilt UL distribution
      TString uldistFile = "RULDist.root";
      TObject *ulDist = nullptr;
      bool existULDist = !gSystem->AccessPathName(uldistFile);
      if (existULDist) {
         TFile *fileULDist = TFile::Open(uldistFile);
         if (fileULDist)
            ulDist = fileULDist->Get("RULDist");
      }
 
      TFile *fileOut = new TFile(mResultFileName, "RECREATE");
      r->Write();
      if (ulDist)
         ulDist->Write();
      Info("StandardHypoTestInvDemo", "HypoTestInverterResult has been written in the file %s", mResultFileName.Data());
 
      fileOut->Close();
   }
 
   // plot the result ( p values vs scan points)
   std::string typeName = "";
   if (calculatorType == 0)
      typeName = "Frequentist";
   if (calculatorType == 1)
      typeName = "Hybrid";
   else if (calculatorType == 2 || calculatorType == 3) {
      typeName = "Asymptotic";
      mPlotHypoTestResult = false;
   }
 
   const char *resultName = r->GetName();
   TString plotTitle = TString::Format("%s CL Scan for workspace %s", typeName.c_str(), resultName);
   HypoTestInverterPlot *plot = new HypoTestInverterPlot("HTI_Result_Plot", plotTitle, r);
 
   // plot in a new canvas with style
   TString c1Name = TString::Format("%s_Scan", typeName.c_str());
   TCanvas *c1 = new TCanvas(c1Name);
   c1->SetLogy(false);
 
   plot->Draw("CLb 2CL"); // plot all and Clb
 
   // if (useCLs)
   //    plot->Draw("CLb 2CL");  // plot all and Clb
   // else
   //    plot->Draw("");  // plot all and Clb
 
   const int nEntries = r->ArraySize();
 
   // plot test statistics distributions for the two hypothesis
   if (mPlotHypoTestResult) {
      TCanvas *c2 = new TCanvas("c2");
      if (nEntries > 1) {
         int ny = TMath::CeilNint(TMath::Sqrt(nEntries));
         int nx = TMath::CeilNint(double(nEntries) / ny);
         c2->Divide(nx, ny);
      }
      for (int i = 0; i < nEntries; i++) {
         if (nEntries > 1)
            c2->cd(i + 1);
         SamplingDistPlot *pl = plot->MakeTestStatPlot(i);
         pl->SetLogYaxis(true);
         pl->Draw();
      }
   }
   gPad = c1;
}
 
// internal routine to run the inverter
HypoTestInverterResult *RooStats::HypoTestInvTool::RunInverter(RooWorkspace *w, const char *modelSBName,
                                                               const char *modelBName, const char *dataName, int type,
                                                               int testStatType, bool useCLs, int npoints,
                                                               double poimin, double poimax, int ntoys,
                                                               bool useNumberCounting, const char *nuisPriorName)
{
 
   std::cout << "Running HypoTestInverter on the workspace " << w->GetName() << std::endl;
 
   w->Print();
 
   RooAbsData *data = w->data(dataName);
   if (!data) {
      Error("StandardHypoTestDemo", "Not existing data %s", dataName);
      return nullptr;
   } else
      std::cout << "Using data set " << dataName << std::endl;
 
   if (mUseVectorStore) {
      RooAbsData::setDefaultStorageType(RooAbsData::Vector);
      data->convertToVectorStore();
   }
 
   // get models from WS
   // get the modelConfig out of the file
   ModelConfig *bModel = (ModelConfig *)w->obj(modelBName);
   ModelConfig *sbModel = (ModelConfig *)w->obj(modelSBName);
 
   if (!sbModel) {
      Error("StandardHypoTestDemo", "Not existing ModelConfig %s", modelSBName);
      return nullptr;
   }
   // check the model
   if (!sbModel->GetPdf()) {
      Error("StandardHypoTestDemo", "Model %s has no pdf ", modelSBName);
      return nullptr;
   }
   if (!sbModel->GetParametersOfInterest()) {
      Error("StandardHypoTestDemo", "Model %s has no poi ", modelSBName);
      return nullptr;
   }
   if (!sbModel->GetObservables()) {
      Error("StandardHypoTestInvDemo", "Model %s has no observables ", modelSBName);
      return nullptr;
   }
   if (!sbModel->GetSnapshot()) {
      Info("StandardHypoTestInvDemo", "Model %s has no snapshot  - make one using model poi", modelSBName);
      sbModel->SetSnapshot(*sbModel->GetParametersOfInterest());
   }
 
   // case of no systematics
   // remove nuisance parameters from model
   if (optHTInv.noSystematics) {
      const RooArgSet *nuisPar = sbModel->GetNuisanceParameters();
      if (nuisPar && nuisPar->getSize() > 0) {
         std::cout << "StandardHypoTestInvDemo"
                   << "  -  Switch off all systematics by setting them constant to their initial values" << std::endl;
         RooStats::SetAllConstant(*nuisPar);
      }
      if (bModel) {
         const RooArgSet *bnuisPar = bModel->GetNuisanceParameters();
         if (bnuisPar)
            RooStats::SetAllConstant(*bnuisPar);
      }
   }
 
   if (!bModel || bModel == sbModel) {
      Info("StandardHypoTestInvDemo", "The background model %s does not exist", modelBName);
      Info("StandardHypoTestInvDemo", "Copy it from ModelConfig %s and set POI to zero", modelSBName);
      bModel = (ModelConfig *)sbModel->Clone();
      bModel->SetName(TString(modelSBName) + TString("_with_poi_0"));
      RooRealVar *var = dynamic_cast<RooRealVar *>(bModel->GetParametersOfInterest()->first());
      if (!var)
         return nullptr;
      double oldval = var->getVal();
      var->setVal(0);
      bModel->SetSnapshot(RooArgSet(*var));
      var->setVal(oldval);
   } else {
      if (!bModel->GetSnapshot()) {
         Info("StandardHypoTestInvDemo", "Model %s has no snapshot  - make one using model poi and 0 values ",
              modelBName);
         RooRealVar *var = dynamic_cast<RooRealVar *>(bModel->GetParametersOfInterest()->first());
         if (var) {
            double oldval = var->getVal();
            var->setVal(0);
            bModel->SetSnapshot(RooArgSet(*var));
            var->setVal(oldval);
         } else {
            Error("StandardHypoTestInvDemo", "Model %s has no valid poi", modelBName);
            return nullptr;
         }
      }
   }
 
   // check model  has global observables when there are nuisance pdf
   // for the hybrid case the globals are not needed
   if (type != 1) {
      bool hasNuisParam = (sbModel->GetNuisanceParameters() && sbModel->GetNuisanceParameters()->getSize() > 0);
      bool hasGlobalObs = (sbModel->GetGlobalObservables() && sbModel->GetGlobalObservables()->getSize() > 0);
      if (hasNuisParam && !hasGlobalObs) {
         // try to see if model has nuisance parameters first
         RooAbsPdf *constrPdf = RooStats::MakeNuisancePdf(*sbModel, "nuisanceConstraintPdf_sbmodel");
         if (constrPdf) {
            Warning("StandardHypoTestInvDemo", "Model %s has nuisance parameters but no global observables associated",
                    sbModel->GetName());
            Warning("StandardHypoTestInvDemo",
                    "\tThe effect of the nuisance parameters will not be treated correctly ");
         }
      }
   }
 
   // save all initial parameters of the model including the global observables
   RooArgSet initialParameters;
   std::unique_ptr<RooArgSet> allParams{sbModel->GetPdf()->getParameters(*data)};
   allParams->snapshot(initialParameters);
 
   // run first a data fit
 
   const RooArgSet *poiSet = sbModel->GetParametersOfInterest();
   RooRealVar *poi = (RooRealVar *)poiSet->first();
 
   std::cout << "StandardHypoTestInvDemo : POI initial value:   " << poi->GetName() << " = " << poi->getVal()
             << std::endl;
 
   // fit the data first (need to use constraint )
   TStopwatch tw;
 
   bool doFit = mInitialFit;
   if (testStatType == 0 && mInitialFit == -1)
      doFit = false; // case of LEP test statistic
   if (type == 3 && mInitialFit == -1)
      doFit = false; // case of Asymptoticcalculator with nominal Asimov
   double poihat = 0;
 
   if (mMinimizerType.empty())
      mMinimizerType = ROOT::Math::MinimizerOptions::DefaultMinimizerType();
   else
      ROOT::Math::MinimizerOptions::SetDefaultMinimizer(mMinimizerType.c_str());
 
   Info("StandardHypoTestInvDemo", "Using %s as minimizer for computing the test statistic",
        ROOT::Math::MinimizerOptions::DefaultMinimizerType().c_str());
 
   if (doFit) {
 
      // do the fit : By doing a fit the POI snapshot (for S+B)  is set to the fit value
      // and the nuisance parameters nominal values will be set to the fit value.
      // This is relevant when using LEP test statistics
 
      Info("StandardHypoTestInvDemo", " Doing a first fit to the observed data ");
      RooArgSet constrainParams;
      if (sbModel->GetNuisanceParameters())
         constrainParams.add(*sbModel->GetNuisanceParameters());
      RooStats::RemoveConstantParameters(&constrainParams);
      tw.Start();
      std::unique_ptr<RooFitResult> fitres{sbModel->GetPdf()->fitTo(
         *data, InitialHesse(false), Hesse(false), Minimizer(mMinimizerType.c_str(), "Migrad"), Strategy(0),
         PrintLevel(mPrintLevel), Constrain(constrainParams), Save(true), Offset(RooStats::NLLOffsetMode()))};
      if (fitres->status() != 0) {
         Warning("StandardHypoTestInvDemo",
                 "Fit to the model failed - try with strategy 1 and perform first an Hesse computation");
         fitres = std::unique_ptr<RooFitResult>{sbModel->GetPdf()->fitTo(
            *data, InitialHesse(true), Hesse(false), Minimizer(mMinimizerType.c_str(), "Migrad"), Strategy(1),
            PrintLevel(mPrintLevel + 1), Constrain(constrainParams), Save(true), Offset(RooStats::NLLOffsetMode()))};
      }
      if (fitres->status() != 0)
         Warning("StandardHypoTestInvDemo", " Fit still failed - continue anyway.....");
 
      poihat = poi->getVal();
      std::cout << "StandardHypoTestInvDemo - Best Fit value : " << poi->GetName() << " = " << poihat << " +/- "
                << poi->getError() << std::endl;
      std::cout << "Time for fitting : ";
      tw.Print();
 
      // save best fit value in the poi snapshot
      sbModel->SetSnapshot(*sbModel->GetParametersOfInterest());
      std::cout << "StandardHypoTestInvo: snapshot of S+B Model " << sbModel->GetName()
                << " is set to the best fit value" << std::endl;
   }
 
   // print a message in case of LEP test statistics because it affects result by doing or not doing a fit
   if (testStatType == 0) {
      if (!doFit)
         Info("StandardHypoTestInvDemo", "Using LEP test statistic - an initial fit is not done and the TS will use "
                                         "the nuisances at the model value");
      else
         Info("StandardHypoTestInvDemo", "Using LEP test statistic - an initial fit has been done and the TS will use "
                                         "the nuisances at the best fit value");
   }
 
   // build test statistics and hypotest calculators for running the inverter
 
   SimpleLikelihoodRatioTestStat slrts(*sbModel->GetPdf(), *bModel->GetPdf());
 
   // null parameters must includes snapshot of poi plus the nuisance values
   RooArgSet nullParams(*sbModel->GetSnapshot());
   if (sbModel->GetNuisanceParameters())
      nullParams.add(*sbModel->GetNuisanceParameters());
   if (sbModel->GetSnapshot())
      slrts.SetNullParameters(nullParams);
   RooArgSet altParams(*bModel->GetSnapshot());
   if (bModel->GetNuisanceParameters())
      altParams.add(*bModel->GetNuisanceParameters());
   if (bModel->GetSnapshot())
      slrts.SetAltParameters(altParams);
   if (mEnableDetOutput)
      slrts.EnableDetailedOutput();
 
   // ratio of profile likelihood - need to pass snapshot for the alt
   RatioOfProfiledLikelihoodsTestStat ropl(*sbModel->GetPdf(), *bModel->GetPdf(), bModel->GetSnapshot());
   ropl.SetSubtractMLE(false);
   if (testStatType == 11)
      ropl.SetSubtractMLE(true);
   ropl.SetPrintLevel(mPrintLevel);
   ropl.SetMinimizer(mMinimizerType.c_str());
   if (mEnableDetOutput)
      ropl.EnableDetailedOutput();
 
   ProfileLikelihoodTestStat profll(*sbModel->GetPdf());
   if (testStatType == 3)
      profll.SetOneSided(true);
   if (testStatType == 4)
      profll.SetSigned(true);
   profll.SetMinimizer(mMinimizerType.c_str());
   profll.SetPrintLevel(mPrintLevel);
   if (mEnableDetOutput)
      profll.EnableDetailedOutput();
 
   profll.SetReuseNLL(mOptimize);
   slrts.SetReuseNLL(mOptimize);
   ropl.SetReuseNLL(mOptimize);
 
   if (mOptimize) {
      profll.SetStrategy(0);
      ropl.SetStrategy(0);
      ROOT::Math::MinimizerOptions::SetDefaultStrategy(0);
   }
 
   if (mMaxPoi > 0)
      poi->setMax(mMaxPoi); // increase limit
 
   MaxLikelihoodEstimateTestStat maxll(*sbModel->GetPdf(), *poi);
   NumEventsTestStat nevtts;
 
   AsymptoticCalculator::SetPrintLevel(mPrintLevel);
 
   // create the HypoTest calculator class
   HypoTestCalculatorGeneric *hc = nullptr;
   if (type == 0)
      hc = new FrequentistCalculator(*data, *bModel, *sbModel);
   else if (type == 1)
      hc = new HybridCalculator(*data, *bModel, *sbModel);
   // else if (type == 2 ) hc = new AsymptoticCalculator(*data, *bModel, *sbModel, false, mAsimovBins);
   // else if (type == 3 ) hc = new AsymptoticCalculator(*data, *bModel, *sbModel, true, mAsimovBins);  // for using
   // Asimov data generated with nominal values
   else if (type == 2)
      hc = new AsymptoticCalculator(*data, *bModel, *sbModel, false);
   else if (type == 3)
      hc = new AsymptoticCalculator(*data, *bModel, *sbModel,
                                    true); // for using Asimov data generated with nominal values
   else {
      Error("StandardHypoTestInvDemo", "Invalid - calculator type = %d supported values are only :\n\t\t\t 0 "
                                       "(Frequentist) , 1 (Hybrid) , 2 (Asymptotic) ",
            type);
      return nullptr;
   }
 
   // set the test statistic
   TestStatistic *testStat = nullptr;
   if (testStatType == 0)
      testStat = &slrts;
   if (testStatType == 1 || testStatType == 11)
      testStat = &ropl;
   if (testStatType == 2 || testStatType == 3 || testStatType == 4)
      testStat = &profll;
   if (testStatType == 5)
      testStat = &maxll;
   if (testStatType == 6)
      testStat = &nevtts;
 
   if (testStat == nullptr) {
      Error("StandardHypoTestInvDemo", "Invalid - test statistic type = %d supported values are only :\n\t\t\t 0 (SLR) "
                                       ", 1 (Tevatron) , 2 (PLR), 3 (PLR1), 4(MLE)",
            testStatType);
      return nullptr;
   }
 
   ToyMCSampler *toymcs = (ToyMCSampler *)hc->GetTestStatSampler();
   if (toymcs && (type == 0 || type == 1)) {
      // look if pdf is number counting or extended
      if (sbModel->GetPdf()->canBeExtended()) {
         if (useNumberCounting)
            Warning("StandardHypoTestInvDemo", "Pdf is extended: but number counting flag is set: ignore it ");
      } else {
         // for not extended pdf
         if (!useNumberCounting) {
            int nEvents = data->numEntries();
            Info("StandardHypoTestInvDemo",
                 "Pdf is not extended: number of events to generate taken  from observed data set is %d", nEvents);
            toymcs->SetNEventsPerToy(nEvents);
         } else {
            Info("StandardHypoTestInvDemo", "using a number counting pdf");
            toymcs->SetNEventsPerToy(1);
         }
      }
 
      toymcs->SetTestStatistic(testStat);
 
      if (data->isWeighted() && !mGenerateBinned) {
         Info("StandardHypoTestInvDemo", "Data set is weighted, nentries = %d and sum of weights = %8.1f but toy "
                                         "generation is unbinned - it would be faster to set mGenerateBinned to true\n",
              data->numEntries(), data->sumEntries());
      }
      toymcs->SetGenerateBinned(mGenerateBinned);
 
      toymcs->SetUseMultiGen(mOptimize);
 
      if (mGenerateBinned && sbModel->GetObservables()->getSize() > 2) {
         Warning("StandardHypoTestInvDemo", "generate binned is activated but the number of observable is %d. Too much "
                                            "memory could be needed for allocating all the bins",
                 sbModel->GetObservables()->getSize());
      }
 
      // set the random seed if needed
      if (mRandomSeed >= 0)
         RooRandom::randomGenerator()->SetSeed(mRandomSeed);
   }
 
   // specify if need to re-use same toys
   if (mReuseAltToys) {
      hc->UseSameAltToys();
   }
 
   if (type == 1) {
      HybridCalculator *hhc = dynamic_cast<HybridCalculator *>(hc);
      assert(hhc);
 
      hhc->SetToys(ntoys, ntoys / mNToysRatio); // can use less ntoys for b hypothesis
 
      // remove global observables from ModelConfig (this is probably not needed anymore in 5.32)
      bModel->SetGlobalObservables(RooArgSet());
      sbModel->SetGlobalObservables(RooArgSet());
 
      // check for nuisance prior pdf in case of nuisance parameters
      if (bModel->GetNuisanceParameters() || sbModel->GetNuisanceParameters()) {
 
         // fix for using multigen (does not work in this case)
         toymcs->SetUseMultiGen(false);
         ToyMCSampler::SetAlwaysUseMultiGen(false);
 
         RooAbsPdf *nuisPdf = nullptr;
         if (nuisPriorName)
            nuisPdf = w->pdf(nuisPriorName);
         // use prior defined first in bModel (then in SbModel)
         if (!nuisPdf) {
            Info("StandardHypoTestInvDemo",
                 "No nuisance pdf given for the HybridCalculator - try to deduce  pdf from the model");
            if (bModel->GetPdf() && bModel->GetObservables())
               nuisPdf = RooStats::MakeNuisancePdf(*bModel, "nuisancePdf_bmodel");
            else
               nuisPdf = RooStats::MakeNuisancePdf(*sbModel, "nuisancePdf_sbmodel");
         }
         if (!nuisPdf) {
            if (bModel->GetPriorPdf()) {
               nuisPdf = bModel->GetPriorPdf();
               Info("StandardHypoTestInvDemo",
                    "No nuisance pdf given - try to use %s that is defined as a prior pdf in the B model",
                    nuisPdf->GetName());
            } else {
               Error("StandardHypoTestInvDemo", "Cannot run Hybrid calculator because no prior on the nuisance "
                                                "parameter is specified or can be derived");
               return nullptr;
            }
         }
         assert(nuisPdf);
         Info("StandardHypoTestInvDemo", "Using as nuisance Pdf ... ");
         nuisPdf->Print();
 
         const RooArgSet *nuisParams =
            (bModel->GetNuisanceParameters()) ? bModel->GetNuisanceParameters() : sbModel->GetNuisanceParameters();
         std::unique_ptr<RooArgSet> np{nuisPdf->getObservables(*nuisParams)};
         if (np->getSize() == 0) {
            Warning("StandardHypoTestInvDemo",
                    "Prior nuisance does not depend on nuisance parameters. They will be smeared in their full range");
         }
 
         hhc->ForcePriorNuisanceAlt(*nuisPdf);
         hhc->ForcePriorNuisanceNull(*nuisPdf);
      }
   } else if (type == 2 || type == 3) {
      if (testStatType == 3)
         ((AsymptoticCalculator *)hc)->SetOneSided(true);
      if (testStatType != 2 && testStatType != 3)
         Warning("StandardHypoTestInvDemo",
                 "Only the PL test statistic can be used with AsymptoticCalculator - use by default a two-sided PL");
   } else if (type == 0) {
      ((FrequentistCalculator *)hc)->SetToys(ntoys, ntoys / mNToysRatio);
      // store also the fit information for each poi point used by calculator based on toys
      if (mEnableDetOutput)
         ((FrequentistCalculator *)hc)->StoreFitInfo(true);
   } else if (type == 1) {
      ((HybridCalculator *)hc)->SetToys(ntoys, ntoys / mNToysRatio);
      // store also the fit information for each poi point used by calculator based on toys
      // if (mEnableDetOutput) ((HybridCalculator*) hc)->StoreFitInfo(true);
   }
 
   // Get the result
   RooMsgService::instance().getStream(1).removeTopic(RooFit::NumericIntegration);
 
   HypoTestInverter calc(*hc);
   calc.SetConfidenceLevel(optHTInv.confLevel);
 
   calc.UseCLs(useCLs);
   calc.SetVerbose(true);
 
   if (npoints > 0) {
      if (poimin > poimax) {
         // if no min/max given scan between MLE and +4 sigma
         poimin = int(poihat);
         poimax = int(poihat + 4 * poi->getError());
      }
      std::cout << "Doing a fixed scan  in interval : " << poimin << " , " << poimax << std::endl;
      calc.SetFixedScan(npoints, poimin, poimax);
   } else {
      // poi->setMax(10*int( (poihat+ 10 *poi->getError() )/10 ) );
      std::cout << "Doing an  automatic scan  in interval : " << poi->getMin() << " , " << poi->getMax() << std::endl;
   }
 
   tw.Start();
   HypoTestInverterResult *r = calc.GetInterval();
   std::cout << "Time to perform limit scan \n";
   tw.Print();
 
   if (mRebuild) {
 
      std::cout << "\n***************************************************************\n";
      std::cout << "Rebuild the upper limit distribution by re-generating new set of pseudo-experiment and re-compute "
                   "for each of them a new upper limit\n\n";
 
      allParams = std::unique_ptr<RooArgSet>{sbModel->GetPdf()->getParameters(*data)};
 
      // define on which value of nuisance parameters to do the rebuild
      // default is best fit value for bmodel snapshot
 
      if (mRebuildParamValues != 0) {
         // set all parameters to their initial workspace values
         allParams->assign(initialParameters);
      }
      if (mRebuildParamValues == 0 || mRebuildParamValues == 1) {
         RooArgSet constrainParams;
         if (sbModel->GetNuisanceParameters())
            constrainParams.add(*sbModel->GetNuisanceParameters());
         RooStats::RemoveConstantParameters(&constrainParams);
 
         const RooArgSet *poiModel = sbModel->GetParametersOfInterest();
         bModel->LoadSnapshot();
 
         // do a profile using the B model snapshot
         if (mRebuildParamValues == 0) {
 
            RooStats::SetAllConstant(*poiModel, true);
 
            sbModel->GetPdf()->fitTo(*data, InitialHesse(false), Hesse(false),
                                     Minimizer(mMinimizerType.c_str(), "Migrad"), Strategy(0), PrintLevel(mPrintLevel),
                                     Constrain(constrainParams), Offset(RooStats::NLLOffsetMode()));
 
            std::cout << "rebuild using fitted parameter value for B-model snapshot" << std::endl;
            constrainParams.Print("v");
 
            RooStats::SetAllConstant(*poiModel, false);
         }
      }
      std::cout << "StandardHypoTestInvDemo: Initial parameters used for rebuilding: ";
      RooStats::PrintListContent(*allParams, std::cout);
 
      tw.Start();
      SamplingDistribution *limDist = calc.GetUpperLimitDistribution(true, mNToyToRebuild);
      std::cout << "Time to rebuild distributions " << std::endl;
      tw.Print();
 
      if (limDist) {
         std::cout << "Expected limits after rebuild distribution " << std::endl;
         std::cout << "expected upper limit  (median of limit distribution) " << limDist->InverseCDF(0.5) << std::endl;
         std::cout << "expected -1 sig limit (0.16% quantile of limit dist) "
                   << limDist->InverseCDF(ROOT::Math::normal_cdf(-1)) << std::endl;
         std::cout << "expected +1 sig limit (0.84% quantile of limit dist) "
                   << limDist->InverseCDF(ROOT::Math::normal_cdf(1)) << std::endl;
         std::cout << "expected -2 sig limit (.025% quantile of limit dist) "
                   << limDist->InverseCDF(ROOT::Math::normal_cdf(-2)) << std::endl;
         std::cout << "expected +2 sig limit (.975% quantile of limit dist) "
                   << limDist->InverseCDF(ROOT::Math::normal_cdf(2)) << std::endl;
 
         // Plot the upper limit distribution
         SamplingDistPlot limPlot((mNToyToRebuild < 200) ? 50 : 100);
         limPlot.AddSamplingDistribution(limDist);
         limPlot.GetTH1F()->SetStats(true); // display statistics
         limPlot.SetLineColor(kBlue);
         new TCanvas("limPlot", "Upper Limit Distribution");
         limPlot.Draw();
 
         /// save result in a file
         limDist->SetName("RULDist");
         TFile *fileOut = new TFile("RULDist.root", "RECREATE");
         limDist->Write();
         fileOut->Close();
 
         // update r to a new updated result object containing the rebuilt expected p-values distributions
         // (it will not recompute the expected limit)
         if (r)
            delete r; // need to delete previous object since GetInterval will return a cloned copy
         r = calc.GetInterval();
 
      } else
         std::cout << "ERROR : failed to re-build distributions " << std::endl;
   }
 
   return r;
}
 
void ReadResult(const char *fileName, const char *resultName = "", bool useCLs = true)
{
   // read a previous stored result from a file given the result name
 
   StandardHypoTestInvDemo(fileName, resultName, "", "", "", 0, 0, useCLs);
}
 
#ifdef USE_AS_MAIN
int main()
{
   StandardHypoTestInvDemo();
}
#endif

Author

Lorenzo Moneta

Definition in file StandardHypoTestInvDemo.C.